USB Gate Opener Remote
Click to enlarge
Sliding gate opener
Sliding gate opener – Royalgate RGSL1.5TN $581.10
Back to products
Door Strike Lock
Door Strike Lock $69.95

USB Gate Opener Remote

$46.45

Ship or pick up from our office.

USB Gate Opener Remote

A USB gate opener remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car’s USB port and using it as a remote.

USB Gate Opener Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. 

Here’s a more detailed explanation:
How it works:
  • USB Gate Opener Remote Dongle:

    The device typically includes a small USB dongle that plugs into your car’s USB port. 

  • Sensing Signal:

    When the USB is plugged in and the car is in the “on” mode, the dongle emits a sensing signal. 

  • Receiver:

    The signal is received by a unit connected to the driveway gate motor. 

  • Gate Motor Activation:

    The receiver then activates the gate motor, causing the driveway gate to open or close.

Key features:
  • Dual Control Modes:
    Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle.
  • Compact and Portable:
    The USB dongle is small and lightweight, making it easy to use and store in your car.
  • Easy Installation:
    It’s designed for simple plug-and-play functionality, requiring no complex setup.
  • Replacement Accessory:
    The USB gate opener remote serves as a convenient replacement for traditional gate remote controls. 
Compare
Add to wishlist
Category: Tags: , , , ,
Description

USB Gate Opener Remote

A USB gate opener remote is a device that allows you to open and close your automatic driveway gates using your car’s USB port.
The USB gate opener remote control typically consists of a USB transmitter that plugs into your car’s USB port and a receiver that is connected to your gate’s motor.
When your car is near the gate, the USB remote transmitter sends a signal to the receiver, which then automatically opens the driveway gate.
Here’s how it works:
  1. Plug and Play: You plug the USB transmitter into your car’s USB port. 
  2. Signal Transmission: The USB gate opener remote sends a signal when your car is near the gate, using either radio waves or Bluetooth. 
  3. Gate Activation: The receiver, connected to your gate motor, receives the signal and activates the electric gate to open or close. 
Key Features:
  • Automatic Mode: The gate opens automatically when the car is within range. 
  • Manual Mode: Some models offer a manual mode where you can open the gate with a button press. 
  • Easy Installation: Installation typically involves plugging the USB transmitter into the car’s USB port and connecting the receiver to the gate motor. 
  • Compatibility: The USB gate opener remotes are often designed to work with various types of automatic gates, including swing and sliding gates. 
  • Durability: The devices are usually made of durable plastic for long-lasting use. 
Additional information
Weight 0.01 kg
Dimensions 5 × 4 × 1 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “USB Gate Opener Remote”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Exit Loop Detector
Compare

Exit Loop Detector

$94.25

Ship or pick up from our office.

Exit Loop Detector

An exit loop detector is a system designed to automatically open gates or barriers for vehicles leaving a secured area. It works primarily on the principle of electromagnetic induction and is a common component in automated access control systems for driveways, parking lots, and commercial properties.
Here's how it generally works:
  • Inductive Loop: A wire loop, usually rectangular, is buried beneath the surface of the driveway or exit lane. This loop is connected to a loop detector unit.
  • Electromagnetic Field: The loop detector sends an alternating current through the wire loop, creating a continuous electromagnetic field around it.
  • Vehicle Detection: When a vehicle (which contains a significant amount of metal) drives over or within the range of this electromagnetic field, it disrupts the field. This disruption causes a change in the loop's inductance.
  • Signal to Gate Operator: The loop detector senses this change in inductance and sends a signal to the gate or barrier's control system.
  • Automatic Opening: Upon receiving the signal, the gate operator is triggered to open, allowing the vehicle to exit without requiring a remote control, keypad, or manual intervention.
Add to wishlist
Add to cart
Quick view
Compare

Underground Exit Wand Vehicle Detector

$187.30
Add to wishlist
Add to cart
Quick view
USB Gate Operator Remote
Compare

USB Gate Operator Remote

$107.30

USB Gate Operator Remote

A USB gate operator remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car's USB port and using it as a remote. USB Gate Operator Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. Here's a more detailed explanation: -How it works: USB Dongle: The device typically includes a small USB dongle that plugs into your car's USB port. Sensing Signal: When the USB is plugged in and the car is in the "on" mode, the dongle emits a sensing signal. Receiver: The signal is received by a unit connected to the driveway gate motor. Gate Motor Activation: The receiver then activates the gate motor, causing the driveway gate to open or close. -Key features: Dual Control Modes: Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle. Compact and Portable: The USB dongle is small and lightweight, making it easy to use and store in your car. Easy Installation: It's designed for simple plug-and-play functionality, requiring no complex setup. Replacement Accessory: It serves as a convenient replacement for traditional gate remote controls.
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view

Related products

Swing gate opener -Zero ZSW400
Compare

Dual swing gate opener -ZERO ZSW600

,
$1,428.70

Ship or pick up from our office.

Dual swing gate opener -ZERO ZSW600

*Suitable gate weight: Maximum 300 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view
Keypad access control K170S300A
Compare

Keypad Access Control K170S300A

$134.30

Keypad Access Control K170S300A

*Rain Shield Cover Included *Waterproof Version *EM/ID card/tag reader *Backlight *DC 12 V *Shock resistance *Anti-vandal Metal shell *Doorbell Button Wiegand Output: Equipped with a Wiegand output for seamless integration with a controller. Multiple Access Modes: Offers Card, PIN, or Card + PIN options, providing versatile access control methods. Durable Metal Case: Housed in a robust Zinc Alloy electroplated case, ensuring durability and vandal resistance. RFID Key Fob Duplicator Attribute-Based Access Control Vs Role-Based Access Control 1,000 User Capacity: Supports up to 1,000 users, ideal for large-scale access control in commercial and industrial settings. Backlight Keypad: Features a backlight keypad for easy operation in low-light conditions.

Description

1000 Users Metal Case 125KHZ RFID Card Keypad Access Controller with Backlight Door Control Independent Code Access Device Description Single door multifunction standalone access controller or a Wiegand output keypad or card reader. It is suitable for mounting either indoor or outdoor in harsh environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case which is availabl in either a bright silver or matt silver finish. Metal Case&Waterproof .Supports up to 1000 users in either a Card, 4 digit PIN, or a Card + PIN option. The inbuilt card reader supports125KHZ EM cardsLock output current short circuit protection, Wiegand output , and a backlight keypad. Ideal choice for door access not only for small shops and domestic households but als for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons. Features Simple Programming, Easy Operatio Adopt function steady card reader of block Keypad Locks for 30 Seconds After 10 False Entrie Can be Connected with Door-open Button and Doorbel Non-volatile Memory in Power Failure Tamper Switch can be Connected to Security Alarm System Backlight key Wiegand 26 output for connection to a controller Support 1000Users
Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Swing Gate Opener –Key Automation STAR3024
Compare

Dual Swing Gate Opener –Key Automation STAR3024

,
$1,257.35

Ship or pick up from our office.

Product Sheet PDF

Dual Swing Gate Opener –Key Automation STAR3024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor

TECHNICAL FEATURES

Speed cm/s 2,5
90° Opening time s 18-25
Force N 1400
Duty cycle percentage % 80
Control unit CT20224
Voltage Vdc 24
Nominal current A 3,5
Nominal power W 85
Appliance isolation class III
Degree of protection IP 54
Dimensions (L - D - H) mm 741 - 115 - 177
Item kg 9,24
Minimum operating temperature °C -20
Max operating temperature °C +55
Max leaf weight kg 400
Max leaf length m 3
Add to wishlist
Add to cart
Quick view
Sold outHot
Dual swing gate opener -Royalgate RGSW700
Compare

Dual swing gate opener -Royalgate RGSW700

,
$739.30

Ship or pick up from our office.

Dual swing gate opener -Royalgate RGSW700

*Suitable gate weight: Maximum 150 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Read more
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Manual release key *1 x Safety sensor
A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view
Safety Sensor - Key Automation 900FT33
Compare

Safety Sensor – Key Automation 900FT33

$176.60

Ship or pick up from our office.

Safety Sensor - Key Automation 900FT33

  • NO/NC
  • AC 10-30 V / DC 10-40 V
  • Receiving Range: 25 Meters
  • IP 54
The photocell safety sensor of the FT series are devices applicable to the automation of doors and gates, which allow to detection of the presence of obstacles along the route between transmitter and receiver. Compatible with sliding and swing gate operators. Best with Key RAY, STAR swing gate operator, and SUN, TURBO sliding gate operator. Watch a video of our previous project on our YouTube channel. The Key Automation 900FT33 is a photoelectric safety sensor designed for use with automated gates and doors. It acts as a safety feature by detecting obstacles in the path of the gate or door and preventing it from closing on them. It's typically used in conjunction with sliding and swing gate operators. 
Add to wishlist
Add to cart
Quick view
Safety Sensor S300
Compare

Safety Sensor S300

$21.35

Ship or pick up from our office.

Safety Sensor S300

A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view