USB Gate Opener Remote
Click to enlarge
Sliding gate opener
Sliding gate opener – Royalgate RGSL1.5TN $581.10
Back to products
Door Strike Lock
Door Strike Lock $69.95

USB Gate Opener Remote

$46.45

Ship or pick up from our office.

USB Gate Opener Remote

A USB gate opener remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car’s USB port and using it as a remote.

USB Gate Opener Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. 

Here’s a more detailed explanation:
How it works:
  • USB Gate Opener Remote Dongle:

    The device typically includes a small USB dongle that plugs into your car’s USB port. 

  • Sensing Signal:

    When the USB is plugged in and the car is in the “on” mode, the dongle emits a sensing signal. 

  • Receiver:

    The signal is received by a unit connected to the driveway gate motor. 

  • Gate Motor Activation:

    The receiver then activates the gate motor, causing the driveway gate to open or close.

Key features:
  • Dual Control Modes:
    Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle.
  • Compact and Portable:
    The USB dongle is small and lightweight, making it easy to use and store in your car.
  • Easy Installation:
    It’s designed for simple plug-and-play functionality, requiring no complex setup.
  • Replacement Accessory:
    The USB gate opener remote serves as a convenient replacement for traditional gate remote controls. 
Compare
Add to wishlist
Category: Tags: , , , ,
Description

USB Gate Opener Remote

A USB gate opener remote is a device that allows you to open and close your automatic driveway gates using your car’s USB port.
The USB gate opener remote control typically consists of a USB transmitter that plugs into your car’s USB port and a receiver that is connected to your gate’s motor.
When your car is near the gate, the USB remote transmitter sends a signal to the receiver, which then automatically opens the driveway gate.
Here’s how it works:
  1. Plug and Play: You plug the USB transmitter into your car’s USB port. 
  2. Signal Transmission: The USB gate opener remote sends a signal when your car is near the gate, using either radio waves or Bluetooth. 
  3. Gate Activation: The receiver, connected to your gate motor, receives the signal and activates the electric gate to open or close. 
Key Features:
  • Automatic Mode: The gate opens automatically when the car is within range. 
  • Manual Mode: Some models offer a manual mode where you can open the gate with a button press. 
  • Easy Installation: Installation typically involves plugging the USB transmitter into the car’s USB port and connecting the receiver to the gate motor. 
  • Compatibility: The USB gate opener remotes are often designed to work with various types of automatic gates, including swing and sliding gates. 
  • Durability: The devices are usually made of durable plastic for long-lasting use. 
Additional information
Weight 0.01 kg
Dimensions 5 × 4 × 1 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “USB Gate Opener Remote”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Exit Loop Detector
Compare

Exit Loop Detector

$94.25

Ship or pick up from our office.

Exit Loop Detector

An exit loop detector is a system designed to automatically open gates or barriers for vehicles leaving a secured area. It works primarily on the principle of electromagnetic induction and is a common component in automated access control systems for driveways, parking lots, and commercial properties.
Here's how it generally works:
  • Inductive Loop: A wire loop, usually rectangular, is buried beneath the surface of the driveway or exit lane. This loop is connected to a loop detector unit.
  • Electromagnetic Field: The loop detector sends an alternating current through the wire loop, creating a continuous electromagnetic field around it.
  • Vehicle Detection: When a vehicle (which contains a significant amount of metal) drives over or within the range of this electromagnetic field, it disrupts the field. This disruption causes a change in the loop's inductance.
  • Signal to Gate Operator: The loop detector senses this change in inductance and sends a signal to the gate or barrier's control system.
  • Automatic Opening: Upon receiving the signal, the gate operator is triggered to open, allowing the vehicle to exit without requiring a remote control, keypad, or manual intervention.
Add to wishlist
Add to cart
Quick view
USB Gate Operator Remote
Compare

USB Gate Operator Remote

$107.30

USB Gate Operator Remote

A USB gate operator remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car's USB port and using it as a remote. USB Gate Operator Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. Here's a more detailed explanation: -How it works: USB Dongle: The device typically includes a small USB dongle that plugs into your car's USB port. Sensing Signal: When the USB is plugged in and the car is in the "on" mode, the dongle emits a sensing signal. Receiver: The signal is received by a unit connected to the driveway gate motor. Gate Motor Activation: The receiver then activates the gate motor, causing the driveway gate to open or close. -Key features: Dual Control Modes: Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle. Compact and Portable: The USB dongle is small and lightweight, making it easy to use and store in your car. Easy Installation: It's designed for simple plug-and-play functionality, requiring no complex setup. Replacement Accessory: It serves as a convenient replacement for traditional gate remote controls.
Add to wishlist
Add to cart
Quick view
Compare

Underground Exit Wand Vehicle Detector

$187.30
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view

Related products

Keypad Access Control V2000
Compare

Keypad Access Control K110V2000

$96.05

Keypad Access Control K110V2000

*Waterproof Version *EM - RFID card/tag reader *Finger Touch *Backlight *DC 12 V *1000 Users *Doorbell button *Rain Shield Cover Included
The Keypad Access Control K110V2000 is a standalone access control system designed for single-door access, typically used for residential or small-to-medium commercial buildings.
It allows users to unlock the door using either a proximity card, a PIN code, or a combination of both. 
Here's a more detailed breakdown:
Key Features:
  • Multiple User Capacity: It can support up to 1000 users. 
  • Multiple Access Methods: Users can unlock the door using RFID cards, PIN codes, or both. 
  • Standalone Operation: It functions independently, without needing to be connected to a central computer. 
  • Wiegand Input/Output: It can connect to an external card reader (Wiegand 26 input) and a controller (Wiegand 26 output). 
  • Tamper Alarm: Includes a tamper alarm for added security. 
  • Backlit Keypad: The keypad is backlit, making it easier to use in low-light conditions. 
  • Short Circuit Protection: The output is automatically turned off if there's a short circuit in the electric lock or alarm output. 
  • Waterproof: Some models, like the V2000-C, are waterproof, making them suitable for outdoor use. 
  • Easy Installation and Programming: The system is designed for straightforward installation and programming. 
  • Doorbell Input: Some models include a doorbell input. 
  • Adjustable Settings: Features like door output time, alarm time, and door open time can be adjusted. 
Applications:
  • Residential Buildings: Ideal for controlling access to apartments or individual homes.
  • Small to Medium Businesses: Suitable for offices, shops, and other commercial spaces.
  • Warehouses and Factories: Can be used to manage access to secure areas.
  • Other Applications: Laboratories, banks, and even prisons. 
Add to wishlist
Add to cart
Quick view
Hot
Swing gate opener -VDS Articulated
Compare

Dual Swing Gate Opener -VDS Articulated

,
$1,442.80

Ship or pick up from our office.

Product Sheet PDF

Dual Swing Gate Opener -VDS Articulated

*Suitable gate weight: Maximum 800 Kg (Per leaf) Included: *2 x Electromechanical articulated arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Safety sensor *2 x Manual release key
A swing gate opener is a device that automates the opening and closing of a swing gate, typically using a motor and a control system.
It provides a convenient and secure way to control access to a property, whether residential, commercial, or industrial. These openers can be used with various gate types, including those that swing inward or outward. 
AC DIY Double Swing Gate Automation kit (GTR058) - Richmond ...
Here's a more detailed explanation:
How it works:
  • Motor:
    A motor, powered by electricity (AC or DC), provides the force to move the gate. 
  • Control System:
    A control board receives signals from a remote control, keypad, or other access control system and activates the motor accordingly. 
  • Opening Mechanism:
    Depending on the type of swing gate opener, the mechanism can be a linear arm, an articulated arm, or an underground system. 
  • Safety Features:
    Many swing gate openers include safety features like obstruction detection, which stops the gate if it encounters an obstacle during opening or closing. 
  • Emergency Release:
    An emergency release mechanism allows manual operation of the gate in case of power failure. 
Types of Swing Gate Openers:
  • Linear Arm: These are the most common type, using a linear actuator to push or pull the gate. 
  • Articulated Arm: These use a hinged arm to move the gate, reducing strain on the hinges. 
  • Underground: The motor and mechanism are installed underground, providing a more discreet appearance. 
  • Dual Swing: These openers are designed for gates that swing open from the center. 
Benefits of using a swing gate opener:
  • Convenience: Automatic opening and closing of the gate with the press of a button or remote control.
  • Security: Prevents unauthorized access to the property.
  • Enhanced Property Value: Adds a layer of sophistication and security to the property.
  • Accessibility: Can be particularly useful for people with mobility issues. 
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS EGO110
Compare

Double swing gate opener –VDS EGO110

,
$1,181.30

Ship or pick up from our office.

Product Sheet PDF

Double swing gate opener –VDS EGO110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Safety sensor *2 x Manual release key The VDS EGO110 is a type of double swing gate opener manufactured by VDS Automation. Here's a breakdown of its key characteristics:
  • Type: It's an electromechanical operator designed for swing gates, meaning it uses an electric motor to open and close the gate leaves. It often utilizes a linear screw or ram type mechanism, pushing and pulling a piston or rotating a threaded shaft to move the gate.
  • Application: It's specifically for double swing gates, which are gates with two leaves that open and close from the center.
  • Construction: It features a sturdy aluminum structure and a stainless steel rod, designed for durability and resistance to corrosion, oxidation, and rust.
  • Gate Capacity: The VDS EGO110 is suitable for gates with a maximum leaf weight of 200 kg (approximately 440 lbs) and a maximum leaf length of 3 meters (approximately 9.8 feet) per leaf.
  • Operation:
    • It offers a 120° opening angle.
    • It can operate with either a 120V AC power supply. The 24V DC version is typically more intensive in its use frequency.
    • It has an anti-squashing system (EN 12453) and a slowing down function (EN 12453) for safety, stopping or reversing if an obstacle is detected.
    • It features quiet operation (less than 30 dBA noise level).
    • It includes a manual release with a key for operation during power outages.
    • Opening time is generally 20-25 seconds.
  • Installation: It's designed for quick installation with multi-position brackets.
  • Environmental Conditions: It's built to operate in temperatures ranging from -20°C to +55°C (-4°F to 131°F) and has an IP55 protection rating, indicating good resistance to dust and water.
  • Optional Features: Optional limit switches and a battery backup kit are available.
In essence, the double swing gate opener –VDS EGO110 is a robust and reliable choice for automating double swing gates, particularly for residential or light commercial applications where the gate size and weight are within its specified limits.
Add to wishlist
Add to cart
Quick view
Sold outHot
Swing gate opener -Royalgate RGSW650
Compare

Double swing gate opener -Royalgate RGSW650

,
$644.40

Ship or pick up from our office.

Double swing gate opener -Royalgate RGSW650

The Royalgate RGSW650 is a double swing gate opener designed to automate the opening and closing of two-leaf swing gates. It is manufactured by Royal Electronics Technology Center Co. (RETCC). Here's a breakdown of its key features and specifications:
  • Type: It's an articulated arm electric gate opener. This means it uses a two-part arm with an "elbow" joint that connects the motor to the gate. This design is often easier to install compared to other types.
  • Suitable Gate Weight: It's designed for gates with a maximum weight of 200 kg per leaf. (Note: One source indicates 100 kg per leaf, while another says 200 kg. It's advisable to confirm the exact specification with the vendor).
  • Power: It can be either 120VAC or 24VDC.
  • Safety Features: Like many modern gate openers, it likely includes obstacle detection, meaning the gates will stop or reverse if they encounter an object during operation. It also typically comes with a safety sensor.
  • Included Components: A typical package includes:
    • 2 x Electromechanical arms
    • 1 x Main control board
    • 1 x Waterproof box
    • 2 x Remote controls
    • 2 x Manual release keys
    • 1 x Safety sensor
  • Installation: Articulated arm gate operators are often a good choice when the gate opener needs to be mounted on a large gate pier or pillar.
  • Additional Features (may vary by model/kit): Some models and associated accessories can offer features like Wiegand input/output for external card readers, tamper alarms, backlit keypads, short circuit protection, and adjustable settings for door output time and alarm time.
In essence, the Royalgate RGSW650 provides an automated and secure solution for residential and commercial properties with double swing gates, offering convenience and control over access.
Add to wishlist
Read more
Quick view
Exit push button SQTPB701H
Compare

Exit Push Button SQTPB701H

$29.75

Ship or pick up from our office.

Exit Push Button SQTPB701H

*No Touch *Backlight *DC 12V *COM-NC-NO
A wave exit push button, also known as a touchless exit button or wave-to-exit switch, is a device that allows users to open a door without physically touching it.
It uses motion sensing technology, typically infrared or microwave, to detect a hand gesture and trigger the door to open. This provides a more hygienic and convenient way to exit a space, especially in environments where minimizing physical contact is desirable. 
Here's a more detailed explanation:
Functionality:
  • Touchless Activation:
    The core function is to activate a door release mechanism (like a magnetic lock or strike) with a simple wave of the hand. 
  • Motion Sensing:
    Wave exit buttons utilize sensors (infrared or microwave) to detect the movement of a hand or object in front of the device. 
  • Contactless Exit:
    This eliminates the need to physically push a button, reducing the spread of germs and providing a more hygienic exit solution. 
Common Applications:
  • Healthcare facilities: Hospitals, clinics, and laboratories where hygiene is paramount. 
  • Food service and preparation areas: Restaurants and kitchens where cleanliness is crucial. 
  • High-traffic areas: Office buildings, schools, and public spaces where many people need to exit frequently. 
  • Disabled access: Provides a convenient and accessible way for individuals with mobility limitations to exit. 
Benefits:
  • Hygiene:
    Reduces the risk of spreading germs and viruses by eliminating the need to touch a button. 
  • Convenience:
    Allows for hands-free operation, making it easier to exit with arms full or for individuals with mobility limitations. 
  • Durability:
    Often more durable than traditional push buttons due to fewer moving parts. 
  • Accessibility:
    Provides a more inclusive exit solution for all individuals. 
Add to wishlist
Add to cart
Quick view
swing gate opener – Key Automation RAY2224
Compare

Dual swing gate opener – Key Automation RAY2224

,
$1,471.95

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener – Key Automation RAY2224

*Suitable gate weight: Maximum 500 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety Sensor
A swing gate opener is a device that automates the opening and closing of a swing gate, typically using a motor and a control system.
It provides a convenient and secure way to control access to a property, whether residential, commercial, or industrial. These openers can be used with various gate types, including those that swing inward or outward. 
AC DIY Double Swing Gate Automation kit (GTR058) - Richmond ...
Here's a more detailed explanation:
How it works:
  • Motor:
    A motor, powered by electricity (AC or DC), provides the force to move the gate. 
  • Control System:
    A control board receives signals from a remote control, keypad, or other access control system and activates the motor accordingly. 
  • Opening Mechanism:
    Depending on the type of swing gate opener, the mechanism can be a linear arm, an articulated arm, or an underground system. 
  • Safety Features:
    Many swing gate openers include safety features like obstruction detection, which stops the gate if it encounters an obstacle during opening or closing. 
  • Emergency Release:
    An emergency release mechanism allows manual operation of the gate in case of power failure. 
Types of Swing Gate Openers:
  • Linear Arm: These are the most common type, using a linear actuator to push or pull the gate. 
  • Articulated Arm: These use a hinged arm to move the gate, reducing strain on the hinges. 
  • Underground: The motor and mechanism are installed underground, providing a more discreet appearance. 
  • Dual Swing: These openers are designed for gates that swing open from the center. 
Benefits of using a swing gate opener:
  • Convenience: Automatic opening and closing of the gate with the press of a button or remote control.
  • Security: Prevents unauthorized access to the property.
  • Enhanced Property Value: Adds a layer of sophistication and security to the property.
  • Accessibility: Can be particularly useful for people with mobility issues. 
Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Wireless Keypad Access Control KW402
Compare

Wireless Keypad Access Control KW402

$89.95

Ship or pick up from our office.

Wireless Keypad Access Control KW402

*Wireless *Rain Shield Cover included *2 Channels *LED Back Light *433 MHz
The Wireless Keypad Access Control KW402 is the preferred secure activation device for the Autoslide Automatic Door System. This security keypad will allow you to enter your home from the outside using a unique programmed code. Combined with the VDS and ZERO gate motor, you can have a secure and automated entryway into and out of your home or workplace. The Wireless Keypad Access Control KW402 is wireless and provides the benefit of not having to run cables through your exterior walls. It has two channels that will allow you to not only have a regular access code but also one you can change for guests to access your home. The Wireless Keypad Access Control KW402 is programmable for two separate codes up to eight digits long each. Audible beeps will alert you to an accepted code as well as an invalid code.
Specifications:
Duplicate Your Existing Remote Controllers so you always have a backup:
1.Vehicle central locking systems
2. Garage doors
3. Electronic gates
4. Electrical appliances/Home automation i.e. lights
5. Car sunroofs
6. Car/Motorbike alarms Easy to use, the 4 channel remote control system lets you take control of your gets, car, home and garage

Wireless Keypad Access Control KW402:

1,This is a dual channel transmitters that are activated only after having entered a Suitable combination.
2, The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.
3,The estimated transmission range is 200 m in open space and 35m indoors .
4, The units are designed to ensure battery life equivalent to an estimated 2 years of oper-ation considering 10 transmissions/day.

Specification Wireless Keypad Access Control KW402:

Power:6Volt DC 2PCS CR2032 Li battery Battery life:2 years (4 times operation every day)
Frequency:433.92MHz+/-75KHz
Transmitter power:1Mw
Data format:standard
Work temp:-20~+55 centidegree
Password number:0-8
Water proof level:1p54
Dimension:85*75*35mm
Weight:150g
Add to wishlist
Add to cart
Quick view