USB Gate Opener Remote
Click to enlarge
Sliding gate opener
Sliding gate opener – Royalgate RGSL1.5TN $581.10
Back to products
Door Strike Lock
Door Strike Lock $69.95

USB Gate Opener Remote

$46.45

Ship or pick up from our office.

USB Gate Opener Remote

A USB gate opener remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car’s USB port and using it as a remote.

USB Gate Opener Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. 

Here’s a more detailed explanation:
How it works:
  • USB Gate Opener Remote Dongle:

    The device typically includes a small USB dongle that plugs into your car’s USB port. 

  • Sensing Signal:

    When the USB is plugged in and the car is in the “on” mode, the dongle emits a sensing signal. 

  • Receiver:

    The signal is received by a unit connected to the driveway gate motor. 

  • Gate Motor Activation:

    The receiver then activates the gate motor, causing the driveway gate to open or close.

Key features:
  • Dual Control Modes:
    Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle.
  • Compact and Portable:
    The USB dongle is small and lightweight, making it easy to use and store in your car.
  • Easy Installation:
    It’s designed for simple plug-and-play functionality, requiring no complex setup.
  • Replacement Accessory:
    The USB gate opener remote serves as a convenient replacement for traditional gate remote controls. 
Compare
Add to wishlist
Category: Tags: , , , ,
Description

USB Gate Opener Remote

A USB gate opener remote is a device that allows you to open and close your automatic driveway gates using your car’s USB port.
The USB gate opener remote control typically consists of a USB transmitter that plugs into your car’s USB port and a receiver that is connected to your gate’s motor.
When your car is near the gate, the USB remote transmitter sends a signal to the receiver, which then automatically opens the driveway gate.
Here’s how it works:
  1. Plug and Play: You plug the USB transmitter into your car’s USB port. 
  2. Signal Transmission: The USB gate opener remote sends a signal when your car is near the gate, using either radio waves or Bluetooth. 
  3. Gate Activation: The receiver, connected to your gate motor, receives the signal and activates the electric gate to open or close. 
Key Features:
  • Automatic Mode: The gate opens automatically when the car is within range. 
  • Manual Mode: Some models offer a manual mode where you can open the gate with a button press. 
  • Easy Installation: Installation typically involves plugging the USB transmitter into the car’s USB port and connecting the receiver to the gate motor. 
  • Compatibility: The USB gate opener remotes are often designed to work with various types of automatic gates, including swing and sliding gates. 
  • Durability: The devices are usually made of durable plastic for long-lasting use. 
Additional information
Weight 0.01 kg
Dimensions 5 × 4 × 1 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “USB Gate Opener Remote”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

USB Gate Operator Remote
Compare

USB Gate Operator Remote

$107.30

USB Gate Operator Remote

A USB gate operator remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car's USB port and using it as a remote. USB Gate Operator Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. Here's a more detailed explanation: -How it works: USB Dongle: The device typically includes a small USB dongle that plugs into your car's USB port. Sensing Signal: When the USB is plugged in and the car is in the "on" mode, the dongle emits a sensing signal. Receiver: The signal is received by a unit connected to the driveway gate motor. Gate Motor Activation: The receiver then activates the gate motor, causing the driveway gate to open or close. -Key features: Dual Control Modes: Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle. Compact and Portable: The USB dongle is small and lightweight, making it easy to use and store in your car. Easy Installation: It's designed for simple plug-and-play functionality, requiring no complex setup. Replacement Accessory: It serves as a convenient replacement for traditional gate remote controls.
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view
Exit Loop Detector
Compare

Exit Loop Detector

$94.25

Ship or pick up from our office.

Exit Loop Detector

An exit loop detector is a system designed to automatically open gates or barriers for vehicles leaving a secured area. It works primarily on the principle of electromagnetic induction and is a common component in automated access control systems for driveways, parking lots, and commercial properties.
Here's how it generally works:
  • Inductive Loop: A wire loop, usually rectangular, is buried beneath the surface of the driveway or exit lane. This loop is connected to a loop detector unit.
  • Electromagnetic Field: The loop detector sends an alternating current through the wire loop, creating a continuous electromagnetic field around it.
  • Vehicle Detection: When a vehicle (which contains a significant amount of metal) drives over or within the range of this electromagnetic field, it disrupts the field. This disruption causes a change in the loop's inductance.
  • Signal to Gate Operator: The loop detector senses this change in inductance and sends a signal to the gate or barrier's control system.
  • Automatic Opening: Upon receiving the signal, the gate operator is triggered to open, allowing the vehicle to exit without requiring a remote control, keypad, or manual intervention.
Add to wishlist
Add to cart
Quick view
Compare

Underground Exit Wand Vehicle Detector

$187.30
Add to wishlist
Add to cart
Quick view

Related products

Swing gate opener -Zero ZSW400
Compare

Dual swing gate opener -Zero ZSW400

,
$1,237.15

Ship or pick up from our office.

Dual swing gate opener -Zero ZSW400

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS EGO110
Compare

Double swing gate opener –VDS EGO110

,
$1,181.30

Ship or pick up from our office.

Product Sheet PDF

Double swing gate opener –VDS EGO110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Safety sensor *2 x Manual release key The VDS EGO110 is a type of double swing gate opener manufactured by VDS Automation. Here's a breakdown of its key characteristics:
  • Type: It's an electromechanical operator designed for swing gates, meaning it uses an electric motor to open and close the gate leaves. It often utilizes a linear screw or ram type mechanism, pushing and pulling a piston or rotating a threaded shaft to move the gate.
  • Application: It's specifically for double swing gates, which are gates with two leaves that open and close from the center.
  • Construction: It features a sturdy aluminum structure and a stainless steel rod, designed for durability and resistance to corrosion, oxidation, and rust.
  • Gate Capacity: The VDS EGO110 is suitable for gates with a maximum leaf weight of 200 kg (approximately 440 lbs) and a maximum leaf length of 3 meters (approximately 9.8 feet) per leaf.
  • Operation:
    • It offers a 120° opening angle.
    • It can operate with either a 120V AC power supply. The 24V DC version is typically more intensive in its use frequency.
    • It has an anti-squashing system (EN 12453) and a slowing down function (EN 12453) for safety, stopping or reversing if an obstacle is detected.
    • It features quiet operation (less than 30 dBA noise level).
    • It includes a manual release with a key for operation during power outages.
    • Opening time is generally 20-25 seconds.
  • Installation: It's designed for quick installation with multi-position brackets.
  • Environmental Conditions: It's built to operate in temperatures ranging from -20°C to +55°C (-4°F to 131°F) and has an IP55 protection rating, indicating good resistance to dust and water.
  • Optional Features: Optional limit switches and a battery backup kit are available.
In essence, the double swing gate opener –VDS EGO110 is a robust and reliable choice for automating double swing gates, particularly for residential or light commercial applications where the gate size and weight are within its specified limits.
Add to wishlist
Add to cart
Quick view
Hot
swing gate opener NICE Wingo 4024
Compare

Double Swing Gate Opener NICE -Wingo 4024

,
$1,363.45

Ship or pick up from our office.

Product Sheet PDF

Double Swing Gate Opener NICE -Wingo 4024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Operators are designed to fit a wide range of settings and applications. The Double Swing Gate Opener NICE - Wingo 4024 is an electromechanical gear motor system designed for automating double swing gates. It's primarily used for residential and light industrial applications, offering a convenient and secure way to open and close gates without manual effort. Here's a breakdown of its key features and specifications: Key Features
  • Electromechanical Gear Motor: It utilizes a 24 Vdc electromechanical gear motor, known for its reliability and quiet operation.
  • Suitable for Various Gate Sizes: It can handle swing gates with individual leaves up to 2 meters in length or up to 400 kg in weight (for a gate leaf of 1 meter).
  • Surface Mounted: The system is designed for surface mounting, meaning the motors are installed directly onto the gate posts or pillars.
  • Easy Installation: Electrical connections are made from above the gear motor, simplifying the installation process.
  • User-Friendly Release: In case of a power failure, the gate can be manually unblocked and moved with a personalized Nice key or standard lock (optional).
  • Moonclever Control Unit (MC424L/MC824H): This advanced control unit offers several intelligent functions:
    • Simple Programming: Easy setup with a single button.
    • Automatic Memorization: Self-learning function for limit switches on opening and closing.
    • Anti-Crush Safety: Features a clutch with an anti-crush safety device to prevent damage or injury.
    • Obstacle Detection: Uses dual technology to detect obstacles during operation.
    • Programmable Functions: Allows for programming of pause time, pedestrian pass door function, and deceleration at the beginning and end of cycles.
    • Battery Backup Option: Can operate during power failures with optional rechargeable batteries (PS124/PS324) that fit inside the control unit.
    • Resistive Sensitive Edge Connection: Can be connected to 8.2 KOhm resistive sensitive edges for enhanced safety.
  • Durable Construction: Features tough aluminum shells with polyester paint finish, making it resistant to atmospheric agents. Internal moving parts are made of steel, light alloys, and techno-polymers for durability.
  • Mechanical Limit Switches: Includes pre-assembled mechanical limit switches for setting the open position.
Add to wishlist
Add to cart
Quick view
Smart Video Doorbell
Compare

Smart Video Doorbell

$169.35

Ship or pick up from our office.

Smart Video Doorbell

*WiFi connection *Android/IOS app on the smartphone *Answer visitors using smartphone worldwide
Add to wishlist
Add to cart
Quick view
Keypad Access Control K155ST15
Compare

Keypad Access Control K155ST15

$99.90

Ship or pick up from our office.

Keypad Access Control K155ST15

*Rain Shield Cover included *EM/ID card/tag reader *Finger Touch *Backlight *2000 Users *DC 12 V *IP 67 (Waterproof) *Doorbell button This unit is a standalone access controller or a Wiegand output keypad/card reader suitable for mounting indoors or outdoors, even in harsh environments. It features a sturdy, vandal proof Zinc Alloy electroplated case available in bright silver or matte silver finishes. The electronics are fully potted, ensuring durability. With support for up to 2000 users in Card, PIN, or Card + PIN configurations, this unit is ideal for small shops, domestic households, as well as commercial and industrial applications such as factories, warehouses, laboratories, banks, and prisons.

Key Features

  • Waterproof: IP68 rated for outdoor use
  • Material: Strong Zinc Alloy Electroplated anti vandal case
  • User Capacity: 2000 users, supports Card, PIN, Card + PIN
  • Adjustable Timers: Door output time, Alarm time, Door Open time
  • Short Circuit Protection: Lock output current short circuit protection
  • Built in Features: Light dependent resistor (LDR) for anti tamper, built in buzzer
  • LED Status Indicators: Red, Yellow, and Green LEDs display the working status

Technical Specifications

  • Operating Voltage: DC 12V ±10%
  • User Capacity: 2000
  • Card Reading Distance: 3 6 cm
  • Active Current: < 60mA
  • Idle Current: 25 ± 5mA
  • Lock Output Load: Max 3A
  • Alarm Output Load: Max 20A
  • Operating Temperature: 45 60
  • Operating Humidity: 10% 90% RH
  • Adjustable Door Relay Time: 0 99 seconds
  • Adjustable Alarm Time: 0 3 minutes
  • Wiegand Interface: Wiegand 26 bit
  • Size: 120 x 76 x 23mm
  • Wiring Connections: Electric Lock, Exit Button, External Alarm, External Reader
Add to wishlist
Add to cart
Quick view
Keypad access control K140C101
Compare

Keypad access control K140C101

$117.80

Ship or pick up from our office.

Keypad access control K140C101

*Rain Shield Cover *Waterproof Version *EM/ID card/tag reader *Backlight *DC 12 V *Shock resistance *1000 Users *Anti-vandal Metal shell *Doorbell button
Add to wishlist
Add to cart
Quick view
Safety Sensor - Key Automation 900FT33
Compare

Safety Sensor – Key Automation 900FT33

$176.60

Ship or pick up from our office.

Safety Sensor - Key Automation 900FT33

  • NO/NC
  • AC 10-30 V / DC 10-40 V
  • Receiving Range: 25 Meters
  • IP 54
The photocell safety sensor of the FT series are devices applicable to the automation of doors and gates, which allow to detection of the presence of obstacles along the route between transmitter and receiver. Compatible with sliding and swing gate operators. Best with Key RAY, STAR swing gate operator, and SUN, TURBO sliding gate operator. Watch a video of our previous project on our YouTube channel. The Key Automation 900FT33 is a photoelectric safety sensor designed for use with automated gates and doors. It acts as a safety feature by detecting obstacles in the path of the gate or door and preventing it from closing on them. It's typically used in conjunction with sliding and swing gate operators. 
Add to wishlist
Add to cart
Quick view
Wifi gate opener
Compare

WiFi Gate/Door controller

$76.80
Add to wishlist
Add to cart
Quick view