USB Gate Opener Remote
Click to enlarge
Sliding gate opener
Sliding gate opener – Royalgate RGSL1.5TN $581.10
Back to products
Door Strike Lock
Door Strike Lock $69.95

USB Gate Opener Remote

$46.45

Ship or pick up from our office.

USB Gate Opener Remote

A USB gate opener remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car’s USB port and using it as a remote.

USB Gate Opener Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. 

Here’s a more detailed explanation:
How it works:
  • USB Gate Opener Remote Dongle:

    The device typically includes a small USB dongle that plugs into your car’s USB port. 

  • Sensing Signal:

    When the USB is plugged in and the car is in the “on” mode, the dongle emits a sensing signal. 

  • Receiver:

    The signal is received by a unit connected to the driveway gate motor. 

  • Gate Motor Activation:

    The receiver then activates the gate motor, causing the driveway gate to open or close.

Key features:
  • Dual Control Modes:
    Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle.
  • Compact and Portable:
    The USB dongle is small and lightweight, making it easy to use and store in your car.
  • Easy Installation:
    It’s designed for simple plug-and-play functionality, requiring no complex setup.
  • Replacement Accessory:
    The USB gate opener remote serves as a convenient replacement for traditional gate remote controls. 
Compare
Add to wishlist
Category: Tags: , , , ,
Description

USB Gate Opener Remote

A USB gate opener remote is a device that allows you to open and close your automatic driveway gates using your car’s USB port.
The USB gate opener remote control typically consists of a USB transmitter that plugs into your car’s USB port and a receiver that is connected to your gate’s motor.
When your car is near the gate, the USB remote transmitter sends a signal to the receiver, which then automatically opens the driveway gate.
Here’s how it works:
  1. Plug and Play: You plug the USB transmitter into your car’s USB port. 
  2. Signal Transmission: The USB gate opener remote sends a signal when your car is near the gate, using either radio waves or Bluetooth. 
  3. Gate Activation: The receiver, connected to your gate motor, receives the signal and activates the electric gate to open or close. 
Key Features:
  • Automatic Mode: The gate opens automatically when the car is within range. 
  • Manual Mode: Some models offer a manual mode where you can open the gate with a button press. 
  • Easy Installation: Installation typically involves plugging the USB transmitter into the car’s USB port and connecting the receiver to the gate motor. 
  • Compatibility: The USB gate opener remotes are often designed to work with various types of automatic gates, including swing and sliding gates. 
  • Durability: The devices are usually made of durable plastic for long-lasting use. 
Additional information
Weight 0.01 kg
Dimensions 5 × 4 × 1 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “USB Gate Opener Remote”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

USB Gate Operator Remote
Compare

USB Gate Operator Remote

$107.30

USB Gate Operator Remote

A USB gate operator remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car's USB port and using it as a remote. USB Gate Operator Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. Here's a more detailed explanation: -How it works: USB Dongle: The device typically includes a small USB dongle that plugs into your car's USB port. Sensing Signal: When the USB is plugged in and the car is in the "on" mode, the dongle emits a sensing signal. Receiver: The signal is received by a unit connected to the driveway gate motor. Gate Motor Activation: The receiver then activates the gate motor, causing the driveway gate to open or close. -Key features: Dual Control Modes: Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle. Compact and Portable: The USB dongle is small and lightweight, making it easy to use and store in your car. Easy Installation: It's designed for simple plug-and-play functionality, requiring no complex setup. Replacement Accessory: It serves as a convenient replacement for traditional gate remote controls.
Add to wishlist
Add to cart
Quick view
Compare

Underground Exit Wand Vehicle Detector

$187.30
Add to wishlist
Add to cart
Quick view
Exit Loop Detector
Compare

Exit Loop Detector

$94.25

Ship or pick up from our office.

Exit Loop Detector

An exit loop detector is a system designed to automatically open gates or barriers for vehicles leaving a secured area. It works primarily on the principle of electromagnetic induction and is a common component in automated access control systems for driveways, parking lots, and commercial properties.
Here's how it generally works:
  • Inductive Loop: A wire loop, usually rectangular, is buried beneath the surface of the driveway or exit lane. This loop is connected to a loop detector unit.
  • Electromagnetic Field: The loop detector sends an alternating current through the wire loop, creating a continuous electromagnetic field around it.
  • Vehicle Detection: When a vehicle (which contains a significant amount of metal) drives over or within the range of this electromagnetic field, it disrupts the field. This disruption causes a change in the loop's inductance.
  • Signal to Gate Operator: The loop detector senses this change in inductance and sends a signal to the gate or barrier's control system.
  • Automatic Opening: Upon receiving the signal, the gate operator is triggered to open, allowing the vehicle to exit without requiring a remote control, keypad, or manual intervention.
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view

Related products

Keypad access control K140C101
Compare

Keypad access control K140C101

$117.80

Ship or pick up from our office.

Keypad access control K140C101

*Rain Shield Cover *Waterproof Version *EM/ID card/tag reader *Backlight *DC 12 V *Shock resistance *1000 Users *Anti-vandal Metal shell *Doorbell button
Add to wishlist
Add to cart
Quick view
Keypad access control K170S300A
Compare

Keypad Access Control K170S300A

$134.30

Keypad Access Control K170S300A

*Rain Shield Cover Included *Waterproof Version *EM/ID card/tag reader *Backlight *DC 12 V *Shock resistance *Anti-vandal Metal shell *Doorbell Button Wiegand Output: Equipped with a Wiegand output for seamless integration with a controller. Multiple Access Modes: Offers Card, PIN, or Card + PIN options, providing versatile access control methods. Durable Metal Case: Housed in a robust Zinc Alloy electroplated case, ensuring durability and vandal resistance. RFID Key Fob Duplicator Attribute-Based Access Control Vs Role-Based Access Control 1,000 User Capacity: Supports up to 1,000 users, ideal for large-scale access control in commercial and industrial settings. Backlight Keypad: Features a backlight keypad for easy operation in low-light conditions.

Description

1000 Users Metal Case 125KHZ RFID Card Keypad Access Controller with Backlight Door Control Independent Code Access Device Description Single door multifunction standalone access controller or a Wiegand output keypad or card reader. It is suitable for mounting either indoor or outdoor in harsh environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case which is availabl in either a bright silver or matt silver finish. Metal Case&Waterproof .Supports up to 1000 users in either a Card, 4 digit PIN, or a Card + PIN option. The inbuilt card reader supports125KHZ EM cardsLock output current short circuit protection, Wiegand output , and a backlight keypad. Ideal choice for door access not only for small shops and domestic households but als for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons. Features Simple Programming, Easy Operatio Adopt function steady card reader of block Keypad Locks for 30 Seconds After 10 False Entrie Can be Connected with Door-open Button and Doorbel Non-volatile Memory in Power Failure Tamper Switch can be Connected to Security Alarm System Backlight key Wiegand 26 output for connection to a controller Support 1000Users
Add to wishlist
Add to cart
Quick view
Wifi gate opener
Compare

WiFi Gate/Door controller

$76.80
Add to wishlist
Add to cart
Quick view
Swing gate opener -Zero ZSW400
Compare

Dual swing gate opener -ZERO ZSW600

,
$1,428.70

Ship or pick up from our office.

Dual swing gate opener -ZERO ZSW600

*Suitable gate weight: Maximum 300 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Keypad Access Control K155ST15
Compare

Keypad Access Control K155ST15

$99.90

Ship or pick up from our office.

Keypad Access Control K155ST15

*Rain Shield Cover included *EM/ID card/tag reader *Finger Touch *Backlight *2000 Users *DC 12 V *IP 67 (Waterproof) *Doorbell button This unit is a standalone access controller or a Wiegand output keypad/card reader suitable for mounting indoors or outdoors, even in harsh environments. It features a sturdy, vandal proof Zinc Alloy electroplated case available in bright silver or matte silver finishes. The electronics are fully potted, ensuring durability. With support for up to 2000 users in Card, PIN, or Card + PIN configurations, this unit is ideal for small shops, domestic households, as well as commercial and industrial applications such as factories, warehouses, laboratories, banks, and prisons.

Key Features

  • Waterproof: IP68 rated for outdoor use
  • Material: Strong Zinc Alloy Electroplated anti vandal case
  • User Capacity: 2000 users, supports Card, PIN, Card + PIN
  • Adjustable Timers: Door output time, Alarm time, Door Open time
  • Short Circuit Protection: Lock output current short circuit protection
  • Built in Features: Light dependent resistor (LDR) for anti tamper, built in buzzer
  • LED Status Indicators: Red, Yellow, and Green LEDs display the working status

Technical Specifications

  • Operating Voltage: DC 12V ±10%
  • User Capacity: 2000
  • Card Reading Distance: 3 6 cm
  • Active Current: < 60mA
  • Idle Current: 25 ± 5mA
  • Lock Output Load: Max 3A
  • Alarm Output Load: Max 20A
  • Operating Temperature: 45 60
  • Operating Humidity: 10% 90% RH
  • Adjustable Door Relay Time: 0 99 seconds
  • Adjustable Alarm Time: 0 3 minutes
  • Wiegand Interface: Wiegand 26 bit
  • Size: 120 x 76 x 23mm
  • Wiring Connections: Electric Lock, Exit Button, External Alarm, External Reader
Add to wishlist
Add to cart
Quick view
Sold outHot
Swing gate opener -Royalgate RGSW650
Compare

Double swing gate opener -Royalgate RGSW650

,
$644.40

Ship or pick up from our office.

Double swing gate opener -Royalgate RGSW650

The Royalgate RGSW650 is a double swing gate opener designed to automate the opening and closing of two-leaf swing gates. It is manufactured by Royal Electronics Technology Center Co. (RETCC). Here's a breakdown of its key features and specifications:
  • Type: It's an articulated arm electric gate opener. This means it uses a two-part arm with an "elbow" joint that connects the motor to the gate. This design is often easier to install compared to other types.
  • Suitable Gate Weight: It's designed for gates with a maximum weight of 200 kg per leaf. (Note: One source indicates 100 kg per leaf, while another says 200 kg. It's advisable to confirm the exact specification with the vendor).
  • Power: It can be either 120VAC or 24VDC.
  • Safety Features: Like many modern gate openers, it likely includes obstacle detection, meaning the gates will stop or reverse if they encounter an object during operation. It also typically comes with a safety sensor.
  • Included Components: A typical package includes:
    • 2 x Electromechanical arms
    • 1 x Main control board
    • 1 x Waterproof box
    • 2 x Remote controls
    • 2 x Manual release keys
    • 1 x Safety sensor
  • Installation: Articulated arm gate operators are often a good choice when the gate opener needs to be mounted on a large gate pier or pillar.
  • Additional Features (may vary by model/kit): Some models and associated accessories can offer features like Wiegand input/output for external card readers, tamper alarms, backlit keypads, short circuit protection, and adjustable settings for door output time and alarm time.
In essence, the Royalgate RGSW650 provides an automated and secure solution for residential and commercial properties with double swing gates, offering convenience and control over access.
Add to wishlist
Read more
Quick view
Safety sensor VDS-TEC2
Compare

Safety sensor VDS-TEC2

$88.30

Ship or pick up from our office.

Safety sensor VDS-TEC2

Technical Details:
  • NO/NC
  • AC/DC 12-24 V
  • Receiving Range: 15 Meters
  • IP 44
Universal light with barriers for any door design automation. The range can be reduced to 30% in bad weather conditions: fog, rain, dust, etc. Compatible with all models of gate openers, such as single swing, double swing, and sliding gates. When someone passes the infrared region, the detector will send an alarm signal to the control board(which is not included).
  • Compact
  • Lightweight
  • Portable
  • Easy to use
Safety sensor VDS-TEC2 works with our SIMPLY sliding gate operator or EGO swing gate opener, and all different sliding gate openers and swing gate operator brands.
Add to wishlist
Add to cart
Quick view