Metal Case Single Phases Diode Bridge Rectifier KBPC5010
Click to enlarge
Programmable timer relay
Programmable timer relay $40.80
Back to products
PIR Infrared Sensor – wireless
PIR Infrared Sensor – wireless $129.90

Metal Case Single Phase Diode Bridge Rectifier KBPC5010

$26.25

Compare
Add to wishlist
Category: Tags: , , , ,
Description

Metal Case Single Phase Diode Bridge Rectifier KBPC5010

*50 Amp

*1000 Volt

A metal case single-phase diode bridge rectifier, KBPC5010, is an electronic component used to convert alternating current (AC) to direct current (DC).

It consists of four diodes arranged in a bridge configuration within a metal casing, which acts as a heat sink.
This type of rectifier is commonly found in power supplies and other electronic circuits where DC power is needed from an AC source. 

Here’s a more detailed explanation:
  • Bridge Rectifier:
    A bridge rectifier uses four diodes connected in a specific configuration to convert AC to DC. It provides full-wave rectification, meaning it utilizes both the positive and negative half-cycles of the AC input. 

  • Single-Phase:
    This refers to the type of AC power source used. Single-phase power is the most common type of AC power used in residential and light commercial applications. 

  • Metal Case:
    The metal case serves as a heat sink, helping to dissipate heat generated by the diodes during operation. This is particularly important for high-power applications where the diodes may generate a significant amount of heat. 

  • Applications:
    Bridge rectifiers are widely used in various electronic devices and systems, including:

    • Power supplies for computers and other electronic equipment. 
    • Battery chargers. 
    • Motor control circuits. 
    • Uninterruptible power supplies (UPS). 
Additional information
Weight 0.02 kg
Dimensions 6 × 6 × 3 cm
Model

KBPC5010
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Metal Case Single Phase Diode Bridge Rectifier KBPC5010”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Rectifier Diode 1N5408
Compare

Rectifier Diode 1N5408

$4.45
Rectifier Diode 1N5408 *3 Amp *1000 Volt The 1N5408 is a rectifier diode, a type of semiconductor device that allows current
Add to wishlist
Add to cart
Quick view
Rectifier Diodes 1N4007
Compare

Rectifier Diodes 1N4007

$1.85
Rectifier Diodes 1N4007 *1 Amp *24 Volt The rectifier diode 1N4007 is a general-purpose rectifier diode widely used in electronic
Add to wishlist
Add to cart
Quick view
Gate operator control board fuse
Compare

Gate operator control board fuse (0.2 to 15 Amp)

$5.00
Gate operator control board fuse (0.2 to 15 Amp) A gate operator control board fuse is a crucial safety device that
Add to wishlist
Add to cart
Quick view

Related products

Reflective safety sensor PQ58
Compare

Reflective safety sensor PQ58

$116.80

Ship or pick up from our office.

Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Original Gate Opener Remote Control
Original Gate Opener’s Remote Control
Compare

Original Gate Opener Remote Control

$49.85

Ship or pick up from our office.

Original Gate Opener Remote Control

*433 MHz *2-4 Buttons *(More than 10 different designs)
A gate opener remote is a handheld device that allows you to remotely open and close an automatic gate. 
It sends a radio signal to a receiver connected to the gate's motor, triggering the gate to move. These remotes are a convenient way to control access to properties, especially when entering or exiting with a vehicle. 
Here's a more detailed explanation:
  • Function:
    The remote transmits a radio signal to a receiver unit connected to the gate opener motor. 
  • Convenience:
    They eliminate the need to manually open or close the gate, providing convenience and security. 
  • Compatibility:
    Remotes must be compatible with the gate opener's frequency and coding system. 
  • Types:
    There are various types of remotes, including single-button (for basic open/close) and multi-button (for more complex functions like stopping or partially opening the gate). 
  • Programming:
    Remotes need to be programmed to work with the specific gate opener. 
  • Frequency:
    Most gate openers use 433.92 MHz frequency, but some older systems might use different frequencies. 
  • Range:
    The range of the remote can vary depending on obstructions like trees or buildings. 
Add to wishlist
Add to cart
Quick view
Exit Button SQTPB801
Compare

Exit Button SQTPB801

$22.85

Ship or pick up from our office.

Exit Button SQTPB801

*Touch *Backlight *DC 12V *COM-NC-NO
An Exit push button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms. 
Here's a more detailed explanation:
  • Function:
    An exit push button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit. 
  • Purpose:
    They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available. 
  • Types:
    Exit push buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them. 
  • Importance:
    These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals. 
  • Applications:
    Exit push buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities. 
Add to wishlist
Add to cart
Quick view
Magnetic lock
Compare

Magnetic lock

$118.30

Ship or pick up from our office.

Magnetic lock

*Capacity: 180 Kg *DC 12 V
Add to wishlist
Add to cart
Quick view
Wired exit push button SQTPB701H
Compare

Exit Push Button SQTPB701H

$29.75

Ship or pick up from our office.

Exit Push Button SQTPB701H

*No Touch *Backlight *DC 12V *COM-NC-NO
A wave exit push button, also known as a touchless exit button or wave-to-exit switch, is a device that allows users to open a door without physically touching it.
It uses motion sensing technology, typically infrared or microwave, to detect a hand gesture and trigger the door to open. This provides a more hygienic and convenient way to exit a space, especially in environments where minimizing physical contact is desirable. 
Here's a more detailed explanation:
Functionality:
  • Touchless Activation:
    The core function is to activate a door release mechanism (like a magnetic lock or strike) with a simple wave of the hand. 
  • Motion Sensing:
    Wave exit buttons utilize sensors (infrared or microwave) to detect the movement of a hand or object in front of the device. 
  • Contactless Exit:
    This eliminates the need to physically push a button, reducing the spread of germs and providing a more hygienic exit solution. 
Common Applications:
  • Healthcare facilities: Hospitals, clinics, and laboratories where hygiene is paramount. 
  • Food service and preparation areas: Restaurants and kitchens where cleanliness is crucial. 
  • High-traffic areas: Office buildings, schools, and public spaces where many people need to exit frequently. 
  • Disabled access: Provides a convenient and accessible way for individuals with mobility limitations to exit. 
Benefits:
  • Hygiene:
    Reduces the risk of spreading germs and viruses by eliminating the need to touch a button. 
  • Convenience:
    Allows for hands-free operation, making it easier to exit with arms full or for individuals with mobility limitations. 
  • Durability:
    Often more durable than traditional push buttons due to fewer moving parts. 
  • Accessibility:
    Provides a more inclusive exit solution for all individuals. 
Add to wishlist
Add to cart
Quick view
Safety sensor P51022H
Compare

Safety sensor P51022H

$78.80

Ship or pick up from our office.

Safety sensor P51022H

*NO/NC *AC/DC 12-24 V *Receiving Range: 12 Meters *IP 54 *External LED flash lamp signal (AC/DC 12V-24 V) *Internal Rotation system: 0~180
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view