Original Gate Opener Remote Control

Name: Original Gate Opener Remote Control - Royal Electronics Technology Center Co.
Price: 49.85 CAD
Availability: InStock

$49.85

Original Gate Opener Remote Control

A gate opener remote is a handheld device that allows you to remotely open and close an automatic gate.

It sends a radio signal to a receiver connected to the gate’s motor, triggering the gate to move. These remotes are a convenient way to control access to properties, especially when entering or exiting with a vehicle.

Here’s a more detailed explanation:

Function:

The remote transmits a radio signal to a receiver unit connected to the gate opener motor.
Convenience:

They eliminate the need to manually open or close the gate, providing convenience and security.
Compatibility:

Remotes must be compatible with the gate opener’s frequency and coding system.
Types:

There are various types of remotes, including single-button (for basic open/close) and multi-button (for more complex functions like stopping or partially opening the gate).
Programming:

Remotes need to be programmed to work with the specific gate opener.
Frequency:

Most gate openers use 433.92 MHz frequency, but some older systems might use different frequencies.
Range:

The range of the remote can vary depending on obstructions like trees or buildings.

Compare

Add to wishlist

Category: Accessories Tags: gate automation, gate motor, Gate opener, gate operator, remote Brand: Key Automation, BFT, Difermatic, Liftmaster, Nice, V2, VDS, Zero

Description

Original Gate Opener Remote Control

*433 MHz

*2-4 Buttons

*(More than 10 different designs)

A gate opener remote control is a handheld device that allows you to remotely open and close an automated gate.

It transmits a radio signal to the gate operator, which then activates the gate motor to move the gate.

Here’s a more detailed explanation:

Functionality:

The remote control enables users to operate the gate from a distance, typically within a certain range, without needing to physically interact with the gate.
Components:

A gate opener system consists of a remote control, a receiver unit connected to the gate motor, and the motor itself.
How it works:

When you press a button on the remote, it sends a radio signal to the receiver. The receiver then relays the signal to the gate motor, which then opens or closes the gate.
Types:

There are different types of remote controls, including single-button remotes for basic open/close functionality and multi-button remotes for controlling multiple gates or features.
Frequency and Compatibility:

Gate remotes operate on specific frequencies (e.g., 433.92 MHz is common). While some remotes are universal, it’s crucial to ensure compatibility with your gate opener’s receiver.
Programming:

Gate remotes need to be programmed to work with a specific gate opener. This involves putting the gate opener into programming mode and then pressing a button on the remote to pair it.

Additional information

Weight	0.02 kg
Dimensions	8 × 4 × 2 cm

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Original Gate Opener Remote Control”

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

Dual swing gate opener – Key Automation RAY2224

Gate Automations, Dual Swing Gate Operators

$1,471.95

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener – Key Automation RAY2224

A swing gate opener is a device that automates the opening and closing of a swing gate, typically using a motor and a control system.

It provides a convenient and secure way to control access to a property, whether residential, commercial, or industrial. These openers can be used with various gate types, including those that swing inward or outward.

AC DIY Double Swing Gate Automation kit (GTR058) - Richmond ...

Here's a more detailed explanation:

How it works:

Motor:

A motor, powered by electricity (AC or DC), provides the force to move the gate.
Control System:

A control board receives signals from a remote control, keypad, or other access control system and activates the motor accordingly.
Opening Mechanism:

Depending on the type of swing gate opener, the mechanism can be a linear arm, an articulated arm, or an underground system.
Safety Features:

Many swing gate openers include safety features like obstruction detection, which stops the gate if it encounters an obstacle during opening or closing.
Emergency Release:

An emergency release mechanism allows manual operation of the gate in case of power failure.

Types of Swing Gate Openers:

Linear Arm: These are the most common type, using a linear actuator to push or pull the gate.
Articulated Arm: These use a hinged arm to move the gate, reducing strain on the hinges.
Underground: The motor and mechanism are installed underground, providing a more discreet appearance.
Dual Swing: These openers are designed for gates that swing open from the center.

Benefits of using a swing gate opener:

Convenience: Automatic opening and closing of the gate with the press of a button or remote control.
Security: Prevents unauthorized access to the property.
Enhanced Property Value: Adds a layer of sophistication and security to the property.
Accessibility: Can be particularly useful for people with mobility issues.

Add to wishlist

Add to cart

Quick view

Compare

Dual Swing Gate Opener –Key Automation STAR3024

Gate Automations, Dual Swing Gate Operators

$1,257.35

Ship or pick up from our office.

Product Sheet PDF

Dual Swing Gate Opener –Key Automation STAR3024

More information about the swing gate openers: WHAT ARE THE DIFFERENT TYPES OF SWING GATE MOTORS? 1- Articulated Arm for Swing Gate Operators How do automatic gates work with articulated swing gate motors? An articulated arm electric gate opener uses a two-part arm with an ‘elbow’ joint to connect the motor to the gate. This arm protrudes from the gate motor body, so there has to be room for the arm to move as the driveway gate opens and closes. This type of electric gate opener is easier to install than other types, thanks to the geometry of the arm system. They can be slightly more expensive than other gate motors, but they open and close automated gates quickly. Many homeowners like discrete gate automation systems, and articulated arm motors can be more obvious when installed. However, many have the control system built into one of the motors. These motors for automatic gates are mounted on the inside of gates so they’re not seen from the outside of closed gates. In the event of power failure or mechanical breakdown, articulated arm motors can normally be released manually from outside the gate with an optional cable release system. All articulated arm gate operators are electric gate motors that can be either 120VAC or 24VDC. All 24V and some 120V versions have obstacle detection. This means that the gates stop moving and some even reverse when they come into contact with an object during operation. Articulated arm gate automation systems can be the best choice where each electric gate opener is mounted on a large gate pier or pillar. 2- Ram And Linear Screw Automatic Swing Gate Openers Ram gate automation motors push and pull a piston mounted on the gate. Linear screw electric motors for gates use an electric motor to rotate the gate mounting along a threaded shaft. Both types of electric gate motors are slim and don’t need a lot of space to operate. However, this advantage does mean that they require careful alignment during installation. Manual release systems are only available from inside the driveway gate. A ram or linear screw type of motor for automatic gate control is attached to the gate at one end and the gate pillar or post at the other end. Ram motors can be hydraulic or driven by electric motors, but all require a separate control box. As with articulated arm motors, 120Vac, and 24Vdc, you can buy versions with obstacle detection for safer operation. Additionally, heavy-duty versions of each type of electric gate opener are available that will operate larger gates with leaves up to 7m long. These electric gate openers can be the best gate automation solution when price is important. Their simpler design and operation can make them a cost-effective solution compared to other types of electric gate motors. 3- Underground Swing Gate Operators Many Canadian homeowners choose underground gate automation motors because they are very discreet. This is because each underground gate opener is hidden under the hinge end of each swing gate. But how do automatic gates work when they’re opened and closed by hidden underground motors? During installation, a carefully positioned hole must be dug to house a foundation box for each underground gate opener. The housing for each underground electric gate motor needs sufficient drainage to prevent the motors from sitting in water, or they will fail. Underground electric gate motors don’t need a lot of space to operate and can be installed on the inside or back of gate pillars. They are usually only installed behind gate pillars when the gates must open more than 90 degrees, so that the post or pillar does not obstruct the gates. With the addition of a 180-degree gate opener, your gates can open much wider than 90 degrees. This is an optional chain drive system for driveways that bend around behind the gate pillars. If the gate only opened to 90 degrees, it could block part of the driveway. But a 180-degree gate opener system means that it can keep going past 90 degrees, so it doesn’t block the driveway. Normally, underground automation of gates is the most expensive solution, but they are almost invisible. It is possible for the most powerful underground gate opener to open and close a swing gate up to 5m long. Underground motors for automatic gates can be manually released from outside the gate. These types of gate motors can be either hydraulic or electromechanical. A separate control box is required, and 120VAC and 24VDC versions with obstacle detection are available. Underground gate opener installation is not simple, and it should always be installed by professional electric gate engineers. Underground gate automation could be the best style for you if you want a discreet, almost invisible electric gate motor installation and you have the budget for this more expensive option.

Add to wishlist

Add to cart

Quick view

Hot

Compare

Dual Swing Gate Opener -VDS Articulated

Gate Automations, Dual Swing Gate Operators

$1,442.80

Ship or pick up from our office.

Product Sheet PDF More information about the swing gate openers: WHAT ARE THE DIFFERENT TYPES OF SWING GATE MOTORS? 1- Articulated Arm for Swing Gate Operators How do automatic gates work with articulated swing gate motors? An articulated arm electric gate opener uses a two-part arm with an ‘elbow’ joint to connect the motor to the gate. This arm protrudes from the gate motor body, so there has to be room for the arm to move as the driveway gate opens and closes. This type of electric gate opener is easier to install than other types, thanks to the geometry of the arm system. They can be slightly more expensive than other gate motors, but they open and close automated gates quickly. Many homeowners like discrete gate automation systems, and articulated arm motors can be more obvious when installed. However, many have the control system built into one of the motors. These motors for automatic gates are mounted on the inside of gates so they’re not seen from the outside of closed gates. In the event of power failure or mechanical breakdown, articulated arm motors can normally be released manually from outside the gate with an optional cable release system. All articulated arm gate operators are electric gate motors that can be either 120VAC or 24VDC. All 24V and some 120V versions have obstacle detection. This means that the gates stop moving and some even reverse when they come into contact with an object during operation. Articulated arm gate automation systems can be the best choice where each electric gate opener is mounted on a large gate pier or pillar. 2- Ram And Linear Screw Automatic Swing Gate Openers Ram gate automation motors push and pull a piston mounted on the gate. Linear screw electric motors for gates use an electric motor to rotate the gate mounting along a threaded shaft. Both types of electric gate motors are slim and don’t need a lot of space to operate. However, this advantage does mean that they require careful alignment during installation. Manual release systems are only available from inside the driveway gate. A ram or linear screw type of motor for automatic gate control is attached to the gate at one end and the gate pillar or post at the other end. Ram motors can be hydraulic or driven by electric motors, but all require a separate control box. As with articulated arm motors, 120Vac, and 24Vdc, you can buy versions with obstacle detection for safer operation. Additionally, heavy-duty versions of each type of electric gate opener are available that will operate larger gates with leaves up to 7m long. These electric gate openers can be the best gate automation solution when price is important. Their simpler design and operation can make them a cost-effective solution compared to other types of electric gate motors. 3- Underground Swing Gate Operators Many Canadian homeowners choose underground gate automation motors because they are very discreet. This is because each underground gate opener is hidden under the hinge end of each swing gate. But how do automatic gates work when they’re opened and closed by hidden underground motors? During installation, a carefully positioned hole must be dug to house a foundation box for each underground gate opener. The housing for each underground electric gate motor needs sufficient drainage to prevent the motors from sitting in water, or they will fail. Underground electric gate motors don’t need a lot of space to operate and can be installed on the inside or back of gate pillars. They are usually only installed behind gate pillars when the gates must open more than 90 degrees, so that the post or pillar does not obstruct the gates. With the addition of a 180-degree gate opener, your gates can open much wider than 90 degrees. This is an optional chain drive system for driveways that bend around behind the gate pillars. If the gate only opened to 90 degrees, it could block part of the driveway. But a 180-degree gate opener system means that it can keep going past 90 degrees, so it doesn’t block the driveway. Normally, underground automation of gates is the most expensive solution, but they are almost invisible. It is possible for the most powerful underground gate opener to open and close a swing gate up to 5m long. Underground motors for automatic gates can be manually released from outside the gate. These types of gate motors can be either hydraulic or electromechanical. A separate control box is required, and 120VAC and 24VDC versions with obstacle detection are available. Underground gate opener installation is not simple, and it should always be installed by professional electric gate engineers. Underground gate automation could be the best style for you if you want a discreet, almost invisible electric gate motor installation and you have the budget for this more expensive option.

A swing gate opener is a device that automates the opening and closing of a swing gate, typically using a motor and a control system.

Here's a more detailed explanation:

How it works:

Motor:

A motor, powered by electricity (AC or DC), provides the force to move the gate.
Control System:

A control board receives signals from a remote control, keypad, or other access control system and activates the motor accordingly.
Opening Mechanism:

Depending on the type of swing gate opener, the mechanism can be a linear arm, an articulated arm, or an underground system.
Safety Features:

Many swing gate openers include safety features like obstruction detection, which stops the gate if it encounters an obstacle during opening or closing.
Emergency Release:

An emergency release mechanism allows manual operation of the gate in case of power failure.

Types of Swing Gate Openers:

Linear Arm: These are the most common type, using a linear actuator to push or pull the gate.
Articulated Arm: These use a hinged arm to move the gate, reducing strain on the hinges.
Underground: The motor and mechanism are installed underground, providing a more discreet appearance.
Dual Swing: These openers are designed for gates that swing open from the center.

Benefits of using a swing gate opener:

Convenience: Automatic opening and closing of the gate with the press of a button or remote control.
Security: Prevents unauthorized access to the property.
Enhanced Property Value: Adds a layer of sophistication and security to the property.
Accessibility: Can be particularly useful for people with mobility issues.