Safety sensor P51022H
Click to enlarge
Underground Swing Gate Opener -VDS RG110
Underground Dual Swing Gate Opener -VDS RG110 $2,103.60
Back to products
Swing gate opener -VDS Articulated
Single swing gate opener -VDS Articulated $1,012.30

Safety sensor P51022H

$78.80

Ship or pick up from our office.

Safety sensor P51022H

*NO/NC

*AC/DC 12-24 V

*Receiving Range: 12 Meters

*IP 54

*External LED flash lamp signal (AC/DC 12V-24 V)

*Internal Rotation system: 0~180

 

The P51022H is a safety sensor, specifically a photoelectric sensor, commonly used in automated gate and garage door opener systems.

Functionality

Like most photoelectric safety sensors, the P51022H works by:

  • Transmitting an infrared light beam: One part of the sensor (the emitter) sends out an invisible light beam.
  • Receiving the beam: The other part of the sensor (the receiver) is designed to detect this beam.
  • Obstruction detection: If something breaks the infrared beam while the gate or door is closing, the receiver instantly signals the opener to stop or reverse its movement. This prevents the door or gate from closing on people, pets, or objects, thus enhancing safety and preventing damage.

Applications

The P51022H is primarily used in:

  • Automated gate openers: For both single swing and sliding gates, ensuring they don’t close on anything in their path.
  • Garage door openers: A mandatory safety feature in most modern residential garage doors, preventing accidents.

 

Key Characteristics

Based on available information for similar safety sensors:

  • Type: Photoelectric sensor (often referred to as “photo eyes” or “safety beams”).
  • Components: Typically comes as a kit including a sending sensor (emitter) and a receiving sensor.
  • Installation Height: These sensors are usually installed a few inches (e.g., 6 inches) above the ground to effectively detect obstacles, including small children or pets.
  • Voltage: Similar sensors often operate on 12-24V AC/DC.

It’s worth noting that this specific model, P51022H, is listed as an accessory for gate opener systems, and there might be an alternative model, P51033H, which is also a photoelectric safety sensor with an integrated flashlight.

Compare
Add to wishlist
Category: Tags: , , , , , , ,
Description

Safety sensor P51022H

Electric automatic gate control, photocell, and flasher integrated safety sensor

I. Technical Specification of the Safety Sensor – P51022H

1. Working voltage: 12~24VAC/DC
2. Working current(24VDC):emitter: ≤15mA    receiver: ≤30mA
3. Photocell wavelength: 940nm
4. Angle of opposite emission: ≤±5°
5. Receiver range: ≥12m
6. Working temperature: -20℃～+60℃
7. Relay contact loading capacity: 1A/30VDC
8. Waterproof grade: IP54
9. Can connect external flash lamp signal (12V-24VAC/DC), LED can flash.
10. Size: 127*50*35mm

II. Safety Instruction for the Safety Sensor – P51022H

1. For security, please read the user manual carefully before initial operation.
2. This photocell is without any fuse, so please make sure the power is off before installation.
3. Only use this system that does not cause any danger to life or property during the running failure or its security risks are eliminated;
4. Please guarantee the products used in effective working range.

III. Installation instruction for the Safety sensor – P51022H

1. The product should be installed more than 20cm upper the ground(to avoid reflection), and the distance between emitter and receiver shall be more than 0.5 meters(if not , maybe the photocell will working on or cannot work);
2. the end user  should installed the photocell on the back of the direct sunshine or other strong shining(±5º) to keep the photocell work well steadily
3. Pls try to avoid installing other photocell emitters within effective receive range;
4. If install many photo cells on the same line, can install receivers on two ends and then emitters in the middle back to back which can effectively avoid the  problem as above.
5. in order to avoid signal bias of emitters and receivers which will easily cause mis-operation, pls Installate the photocell firmly
6. Connecting power after checking no error of connecting lines:
6.1 Photocell
After the emitter and receiver module of photocell input 12V-24VAC/DC, emitter LED on,receiver LED on, receiver NO/COM on while NC/COM off;
Making the CAP of emitter and receiver align, receiver LED off, NC/COM on while NO/COM off. If the signal between emitter and receiver is interrupted, receiver LED on, NC/COM off while NO/COM on.
6.2 Flash lamp
6.2.1 When there is signal income from FLASH port(12V-24V AC/DC)
It keeps lighting when JP1 CAP connects the two pins under
It blinks  when JP1 CAP connects the two pins upper
6.2.2 When there is no signal income from FLASH port(12V-24V AC/DC)
It doesn’t work when JP1 CAP connects any two pins

Additional information
Weight 0.2 kg
Dimensions 15 × 12 × 5 cm
Model

P51022H
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Safety sensor P51022H”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Safety sensor - P51033H
Compare

Safety sensor – P51033H

$75.75

Ship or pick up from our office.

Safety sensor - P51033H

*NO/NC *AC/DC 12-24 V *Receiving Range: 12 Meters *IP 54 *External LED flash lamp signal (AC/DC 12V-24 V) *The P51033H safety sensor included the LED flash light   The P51033H is a safety sensor, specifically a photoelectric sensor (also known as a photo eye) commonly used in automatic gate and door systems. What it Does 🚧 This sensor functions as an obstruction detection device. It consists of two parts: an emitter and a receiver. The emitter sends out an infrared light beam, and the receiver detects it. If an object (like a person, pet, or vehicle) interrupts this beam, the sensor sends a signal to the gate or door's control board, causing it to stop or reverse its movement, preventing potential injury or damage.   Key Specifications ⚙️ Here are some of the technical details for the P51033H:
  • Working Voltage: 12~24VAC/DC
  • Working Current (24VDC):
    • Emitter:
    • Receiver:
  • Photocell Wavelength: (infrared)
  • Angle of Opposite Emission:
  • Receiver Range: (this range can be reduced by about in adverse weather conditions like fog, rain, or dust)
  • Working Temperature:
  • Relay Contact Loading Capacity:
  • Waterproof Grade: IP54
  • Size:
  • Outputs: NO/NC (Normally Open/Normally Closed) contacts
  Installation Considerations 🛠️ For optimal performance, the P51033H should be installed:
  • Height: More than above the ground to prevent false reflections.
  • Distance between Emitter and Receiver: More than meters to ensure proper operation.
  • Sunlight: The receiver should be installed away from direct sunlight or other strong light sources () to maintain stable operation.
  • Multiple Sensors: If multiple photocells are installed on the same line, receivers can be placed at both ends and emitters in the middle, back-to-back, to prevent interference.
  • Firm Installation: Install the photocell firmly to avoid signal bias between the emitter and receiver, which could lead to malfunctions.
  Safety Importance 🛡️ Safety sensors like the P51033H are crucial for automated systems like gates and doors. They provide a vital layer of protection, ensuring that the system stops or reverses if an obstacle is detected, thereby preventing accidents, injuries, and property damage.
Add to wishlist
Add to cart
Quick view
Sold out
Safety sensor - Nice Era-EPM
Compare

Safety sensor – Nice Era-EPM

$132.35

Ship or pick up from our office.

Safety sensor - Nice Era-EPM

The Nice Era-EPM is a photoelectric safety sensor commonly used in automation systems for gates, garage doors, barriers, and similar installations. It's also often referred to as a photocell or beam sensor. Here's a breakdown of what it is and its key features: Purpose: Its primary function is to enhance safety by detecting obstacles in the path of a moving gate or door. It consists of a transmitter (TX) and a receiver (RX) that are installed facing each other. The transmitter emits an infrared beam, and if this beam is interrupted by an object, the receiver signals the control unit to stop or reverse the automation system, preventing accidents, injuries, or damage to vehicles. Key Features and Specifications:
  • Photoelectric Technology: It uses an infrared beam to detect obstructions.
  • Transmitter (TX) and Receiver (RX): Comes as a pair, with one unit transmitting the beam and the other receiving it.
  • Relay Output: It's a relay photocell, meaning it sends a signal to the control unit via a relay output.
  • Range: Typically has a useful range of 15 meters, which can be extended up to 30 meters in some configurations (e.g., by cutting a "+10m" electrical bridge). However, range can be reduced in adverse weather conditions like fog, rain, or dust.
  • Anti-Glare Circuitry: Designed with an anti-glare circuit to minimize interference from sunlight, ensuring reliable performance in various lighting conditions.
  • Durable Construction: Features an ABS body that is resistant to weather conditions, making it suitable for outdoor use (IP44 protection rating).
  • Easy Installation: Known for its simplified assembly and installation procedure. Some versions (like those with Nice BlueBUS technology) require only two wires for connection to compatible control units, simplifying wiring.
  • Wide Angle of Reception: Generally has a 10° (or 8° with a reduction cone) angle of reception, which helps in compensating for minor alignment issues.
  • Compatibility: While it's a Nice-branded product, it's often described as a "universal photocell" compatible with most gate and garage door automation systems, especially those that accept standard relay inputs. Some models also feature Nice BlueBUS technology for seamless integration with Nice control units that support it.
  • Safety Compliance: It is a Type D presence detector according to EN 12453 standard, which means it detects obstacles on the optical axis. When connected to a control unit with a "phototest" function, it can achieve Category 2 safety against malfunctions according to EN 954-1.
Installation: The Nice Era-EPM sensors are typically surface-mounted on two solid, parallel walls, facing each other to create the safety beam. Proper alignment between the transmitter and receiver is crucial for optimal operation. In essence, the Nice Era-EPM is a robust and reliable safety device designed to make automated gate and door systems safer by actively detecting obstacles in their path of operation.
Add to wishlist
Read more
Quick view
Safety sensor VDS-TEC2
Compare

Safety sensor VDS-TEC2

$88.30

Ship or pick up from our office.

Safety sensor VDS-TEC2

Technical Details:
  • NO/NC
  • AC/DC 12-24 V
  • Receiving Range: 15 Meters
  • IP 44
Universal light with barriers for any door design automation. The range can be reduced to 30% in bad weather conditions: fog, rain, dust, etc. Compatible with all models of gate openers, such as single swing, double swing, and sliding gates. When someone passes the infrared region, the detector will send an alarm signal to the control board(which is not included).
  • Compact
  • Lightweight
  • Portable
  • Easy to use
Safety sensor VDS-TEC2 works with our SIMPLY sliding gate operator or EGO swing gate opener, and all different sliding gate openers and swing gate operator brands. The VDS-TEC2 is a type of photoelectric safety sensor primarily used in automated gate and door systems, including swing and sliding gates.
Here's a breakdown of its key characteristics:
  • Function: It works by emitting an infrared light beam between two units: a sender and a receiver. If an object (like a person or vehicle) breaks this invisible beam, the sensor detects the interruption.
  • Safety Feature: When the beam is broken, the VDS-TEC2 sends a signal to the gate's control board. This triggers an action, most commonly preventing the gate from closing to avoid accidents or activating an alarm.
  • Applications: Its main application is in enhancing the safety of automated gates and doors in various settings, ensuring that they don't close on obstructions. It is compatible with different models of gate openers.
  • Technical Specifications:
    • Contacts: NO/NC (Normally Open/Normally Closed)
    • Power Supply: AC/DC 12-24 V
    • Receiving Range: Up to 15 meters (this range can be reduced in adverse weather conditions like fog, rain, or dust).
    • IP Rating: IP44 (meaning it's protected against solid objects larger than 1mm and against splashing water from any direction).
  • Design: It's described as compact, lightweight, portable, and easy to use.
In essence, the VDS-TEC2 acts as a crucial safety mechanism to prevent accidents and damage in automated gate and door operations.
Add to wishlist
Add to cart
Quick view
Safety sensor FT2008
Compare

Safety sensor FT2008

$94.30

Ship or pick up from our office.

Safety sensor FT2008

*NO/NC *AC/DC 12-24 V *Receiving Range: 15 Meters *IP 44
A gate opener safety sensor is a device designed to detect objects or people in the path of an automatic gate and prevent it from closing or hitting them, ensuring safety and preventing damage or injury.
These sensors can be photoelectric, pressure sensors, magnetic sensors, or loop detectors and are crucial for preventing accidents and ensuring smooth gate operation. 

Types of Gate Opener Safety Sensors:

  • Photoelectric Sensors:
    These sensors use an infrared beam to detect objects. When the beam is broken by an object, the gate opener is signaled to stop or reverse. 
  • Pressure Sensors:
    These sensors are typically located along the edge of the gate and detect pressure when the gate comes into contact with an object. 
  • Magnetic Sensors:
    These sensors use a magnetic field to detect the presence of vehicles or objects near the gate. 
  • Loop Detectors:
    These sensors use a wire loop buried in the ground near the gate. When a vehicle or object passes over the loop, it triggers the gate to stop or reverse. 
How They Work:
  1. Detection: The sensor detects the presence of an object or person in the gate's path. 
  2. Signal: The sensor sends a signal to the gate operator. 
  3. Action: The gate operator responds by stopping, reversing, or remaining open, depending on the sensor type and programmed settings. 
Importance of Safety Sensors:
  • Prevent Accidents: They protect people and vehicles from being hit by the gate. 
  • Prevent Damage: They help avoid damage to the gate, vehicles, or property. 
  • Ensure Reliable Operation: They contribute to the smooth and safe operation of the gate. 
Add to wishlist
Add to cart
Quick view

Related products

Exit Button SQTPB801
Compare

Exit Button SQTPB801

$22.85

Ship or pick up from our office.

Exit Button SQTPB801

*Touch *Backlight *DC 12V *COM-NC-NO
An exit button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms. 
Here's a more detailed explanation:
  • Function:
    An exit button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit. 
  • Purpose:
    They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available. 
  • Types:
    Exit buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them. 
  • Importance:
    These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals. 
  • Applications:
    Exit buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities. 
Add to wishlist
Add to cart
Quick view
Keypad access control K170S300A
Compare

Keypad Access Control K170S300A

$134.30

Keypad Access Control K170S300A

*Rain Shield Cover Included *Waterproof Version *EM/ID card/tag reader *Backlight *DC 12 V *Shock resistance *Anti-vandal Metal shell *Doorbell Button Wiegand Output: Equipped with a Wiegand output for seamless integration with a controller. Multiple Access Modes: Offers Card, PIN, or Card + PIN options, providing versatile access control methods. Durable Metal Case: Housed in a robust Zinc Alloy electroplated case, ensuring durability and vandal resistance. RFID Key Fob Duplicator Attribute-Based Access Control Vs Role-Based Access Control 1,000 User Capacity: Supports up to 1,000 users, ideal for large-scale access control in commercial and industrial settings. Backlight Keypad: Features a backlight keypad for easy operation in low-light conditions.

Description

1000 Users Metal Case 125KHZ RFID Card Keypad Access Controller with Backlight Door Control Independent Code Access Device Description Single door multifunction standalone access controller or a Wiegand output keypad or card reader. It is suitable for mounting either indoor or outdoor in harsh environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case which is availabl in either a bright silver or matt silver finish. Metal Case&Waterproof .Supports up to 1000 users in either a Card, 4 digit PIN, or a Card + PIN option. The inbuilt card reader supports125KHZ EM cardsLock output current short circuit protection, Wiegand output , and a backlight keypad. Ideal choice for door access not only for small shops and domestic households but als for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons. Features Simple Programming, Easy Operatio Adopt function steady card reader of block Keypad Locks for 30 Seconds After 10 False Entrie Can be Connected with Door-open Button and Doorbel Non-volatile Memory in Power Failure Tamper Switch can be Connected to Security Alarm System Backlight key Wiegand 26 output for connection to a controller Support 1000Users
Add to wishlist
Add to cart
Quick view
Sold outHot
Swing gate opener -Royalgate RGSW650
Compare

Double swing gate opener -Royalgate RGSW650

,
$644.40

Ship or pick up from our office.

Double swing gate opener -Royalgate RGSW650

The Royalgate RGSW650 is a double swing gate opener designed to automate the opening and closing of two-leaf swing gates. It is manufactured by Royal Electronics Technology Center Co. (RETCC). Here's a breakdown of its key features and specifications:
  • Type: It's an articulated arm electric gate opener. This means it uses a two-part arm with an "elbow" joint that connects the motor to the gate. This design is often easier to install compared to other types.
  • Suitable Gate Weight: It's designed for gates with a maximum weight of 200 kg per leaf. (Note: One source indicates 100 kg per leaf, while another says 200 kg. It's advisable to confirm the exact specification with the vendor).
  • Power: It can be either 120VAC or 24VDC.
  • Safety Features: Like many modern gate openers, it likely includes obstacle detection, meaning the gates will stop or reverse if they encounter an object during operation. It also typically comes with a safety sensor.
  • Included Components: A typical package includes:
    • 2 x Electromechanical arms
    • 1 x Main control board
    • 1 x Waterproof box
    • 2 x Remote controls
    • 2 x Manual release keys
    • 1 x Safety sensor
  • Installation: Articulated arm gate operators are often a good choice when the gate opener needs to be mounted on a large gate pier or pillar.
  • Additional Features (may vary by model/kit): Some models and associated accessories can offer features like Wiegand input/output for external card readers, tamper alarms, backlit keypads, short circuit protection, and adjustable settings for door output time and alarm time.
In essence, the Royalgate RGSW650 provides an automated and secure solution for residential and commercial properties with double swing gates, offering convenience and control over access.
Add to wishlist
Read more
Quick view
Wireless Keypad Access Control KW200
Compare

Wireless Keypad Access Control KW200

$127.80

Wireless Keypad Access Control KW200

*Backlight *433 MHz *Finger Touch *Rain cover
Wireless keypad access control systems replace traditional keys with a digital PIN code entry for building access, eliminating the need for physical keys and enhancing security.
These systems often include features like remote management via smart devices, audit trails of access events, and integration with other security systems like intercoms. 
Here's a more detailed breakdown:
Core Functionality:
  • Keyless Entry:
    Users enter a unique PIN code into a keypad to unlock a door or gate. 
  • Wireless Communication:
    The keypad communicates wirelessly with a receiver or controller, eliminating the need for extensive wiring. 
  • Remote Management:
    Many systems allow administrators to manage access permissions, view audit trails, and adjust settings remotely via a smartphone app or computer. 
  • Integration:
    Some systems can integrate with intercoms, surveillance cameras, and other security components for a more comprehensive solution. 
Key Features:
  • PIN Codes: Users are assigned unique PIN codes for entry. 
  • Proximity Cards/Fobs: Some systems also support access via proximity cards or fobs for users who prefer that method. 
  • Audit Trails: The system can record and store data about who accessed the door, when, and how, providing a valuable security record. 
  • Weatherproof and Durable: Many outdoor keypads are designed to withstand harsh weather conditions and vandalism. 
  • Backlit Keypads: Backlit keypads make it easier to use the system in low-light conditions. 
Types of Wireless Keypad Access Control:
  • Stand-Alone Systems: These systems are self-contained and don't require connection to a central system. 
  • Integrated Systems: These systems are part of a larger access control or building management system. 
  • Wired and Wireless Hybrid: Some systems combine wired and wireless components for added flexibility. 
Benefits:
  • Enhanced Security: Eliminates the risk of lost or stolen keys.
  • Increased Convenience: Users don't need to carry keys.
  • Improved Auditability: Tracks access events for security monitoring.
  • Remote Management: Allows for easy administration and control. 
Add to wishlist
Add to cart
Quick view
Smart Video Doorbell
Compare

Smart Video Doorbell

$169.35

Ship or pick up from our office.

Smart Video Doorbell

*WiFi connection *Android/IOS app on the smartphone *Answer visitors using smartphone worldwide
Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view
Hot
swing gate opener NICE Wingo 4024
Compare

Double Swing Gate Opener NICE -Wingo 4024

,
$1,363.45

Ship or pick up from our office.

Product Sheet PDF

Double Swing Gate Opener NICE -Wingo 4024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Operators are designed to fit a wide range of settings and applications. The Double Swing Gate Opener NICE - Wingo 4024 is an electromechanical gear motor system designed for automating double swing gates. It's primarily used for residential and light industrial applications, offering a convenient and secure way to open and close gates without manual effort. Here's a breakdown of its key features and specifications: Key Features
  • Electromechanical Gear Motor: It utilizes a 24 Vdc electromechanical gear motor, known for its reliability and quiet operation.
  • Suitable for Various Gate Sizes: It can handle swing gates with individual leaves up to 2 meters in length or up to 400 kg in weight (for a gate leaf of 1 meter).
  • Surface Mounted: The system is designed for surface mounting, meaning the motors are installed directly onto the gate posts or pillars.
  • Easy Installation: Electrical connections are made from above the gear motor, simplifying the installation process.
  • User-Friendly Release: In case of a power failure, the gate can be manually unblocked and moved with a personalized Nice key or standard lock (optional).
  • Moonclever Control Unit (MC424L/MC824H): This advanced control unit offers several intelligent functions:
    • Simple Programming: Easy setup with a single button.
    • Automatic Memorization: Self-learning function for limit switches on opening and closing.
    • Anti-Crush Safety: Features a clutch with an anti-crush safety device to prevent damage or injury.
    • Obstacle Detection: Uses dual technology to detect obstacles during operation.
    • Programmable Functions: Allows for programming of pause time, pedestrian pass door function, and deceleration at the beginning and end of cycles.
    • Battery Backup Option: Can operate during power failures with optional rechargeable batteries (PS124/PS324) that fit inside the control unit.
    • Resistive Sensitive Edge Connection: Can be connected to 8.2 KOhm resistive sensitive edges for enhanced safety.
  • Durable Construction: Features tough aluminum shells with polyester paint finish, making it resistant to atmospheric agents. Internal moving parts are made of steel, light alloys, and techno-polymers for durability.
  • Mechanical Limit Switches: Includes pre-assembled mechanical limit switches for setting the open position.
Add to wishlist
Add to cart
Quick view