Safety sensor P51022H
Click to enlarge
Underground Swing Gate Opener -VDS RG110
Underground Dual Swing Gate Opener -VDS RG110 $2,103.60
Back to products
Swing gate opener -VDS Articulated
Single swing gate opener -VDS Articulated $1,012.30

Safety sensor P51022H

$78.80

Ship or pick up from our office.

Safety sensor P51022H

*NO/NC

*AC/DC 12-24 V

*Receiving Range: 12 Meters

*IP 54

*External LED flash lamp signal (AC/DC 12V-24 V)

*Internal Rotation system: 0~180

 

The P51022H is a safety sensor, specifically a photoelectric sensor, commonly used in automated gate and garage door opener systems.

Functionality

Like most photoelectric safety sensors, the P51022H works by:

  • Transmitting an infrared light beam: One part of the sensor (the emitter) sends out an invisible light beam.
  • Receiving the beam: The other part of the sensor (the receiver) is designed to detect this beam.
  • Obstruction detection: If something breaks the infrared beam while the gate or door is closing, the receiver instantly signals the opener to stop or reverse its movement. This prevents the door or gate from closing on people, pets, or objects, thus enhancing safety and preventing damage.

Applications

The P51022H is primarily used in:

  • Automated gate openers: For both single swing and sliding gates, ensuring they don’t close on anything in their path.
  • Garage door openers: A mandatory safety feature in most modern residential garage doors, preventing accidents.

 

Key Characteristics

Based on available information for similar safety sensors:

  • Type: Photoelectric sensor (often referred to as “photo eyes” or “safety beams”).
  • Components: Typically comes as a kit including a sending sensor (emitter) and a receiving sensor.
  • Installation Height: These sensors are usually installed a few inches (e.g., 6 inches) above the ground to effectively detect obstacles, including small children or pets.
  • Voltage: Similar sensors often operate on 12-24V AC/DC.

It’s worth noting that this specific model, P51022H, is listed as an accessory for gate opener systems, and there might be an alternative model, P51033H, which is also a photoelectric safety sensor with an integrated flashlight.

Compare
Add to wishlist
Category: Tags: , , , , , , ,
Description

Safety sensor P51022H

Electric automatic gate control, photocell, and flasher integrated safety sensor

I. Technical Specification of the Safety Sensor – P51022H

1. Working voltage: 12~24VAC/DC
2. Working current(24VDC):emitter: ≤15mA    receiver: ≤30mA
3. Photocell wavelength: 940nm
4. Angle of opposite emission: ≤±5°
5. Receiver range: ≥12m
6. Working temperature: -20℃～+60℃
7. Relay contact loading capacity: 1A/30VDC
8. Waterproof grade: IP54
9. Can connect external flash lamp signal (12V-24VAC/DC), LED can flash.
10. Size: 127*50*35mm

II. Safety Instruction for the Safety Sensor – P51022H

1. For security, please read the user manual carefully before initial operation.
2. This photocell is without any fuse, so please make sure the power is off before installation.
3. Only use this system that does not cause any danger to life or property during the running failure or its security risks are eliminated;
4. Please guarantee the products used in effective working range.

III. Installation instruction for the Safety sensor – P51022H

1. The product should be installed more than 20cm upper the ground(to avoid reflection), and the distance between emitter and receiver shall be more than 0.5 meters(if not , maybe the photocell will working on or cannot work);
2. the end user  should installed the photocell on the back of the direct sunshine or other strong shining(±5º) to keep the photocell work well steadily
3. Pls try to avoid installing other photocell emitters within effective receive range;
4. If install many photo cells on the same line, can install receivers on two ends and then emitters in the middle back to back which can effectively avoid the  problem as above.
5. in order to avoid signal bias of emitters and receivers which will easily cause mis-operation, pls Installate the photocell firmly
6. Connecting power after checking no error of connecting lines:
6.1 Photocell
After the emitter and receiver module of photocell input 12V-24VAC/DC, emitter LED on,receiver LED on, receiver NO/COM on while NC/COM off;
Making the CAP of emitter and receiver align, receiver LED off, NC/COM on while NO/COM off. If the signal between emitter and receiver is interrupted, receiver LED on, NC/COM off while NO/COM on.
6.2 Flash lamp
6.2.1 When there is signal income from FLASH port(12V-24V AC/DC)
It keeps lighting when JP1 CAP connects the two pins under
It blinks  when JP1 CAP connects the two pins upper
6.2.2 When there is no signal income from FLASH port(12V-24V AC/DC)
It doesn’t work when JP1 CAP connects any two pins

Additional information
Weight 0.2 kg
Dimensions 15 × 12 × 5 cm
Model

P51022H
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Safety sensor P51022H”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Sold out
Safety sensor - Nice Era-EPM
Compare

Safety sensor – Nice Era-EPM

$132.35

Ship or pick up from our office.

Safety sensor - Nice Era-EPM

The Nice Era-EPM is a photoelectric safety sensor commonly used in automation systems for gates, garage doors, barriers, and similar installations. It's also often referred to as a photocell or beam sensor. Here's a breakdown of what it is and its key features: Purpose: Its primary function is to enhance safety by detecting obstacles in the path of a moving gate or door. It consists of a transmitter (TX) and a receiver (RX) that are installed facing each other. The transmitter emits an infrared beam, and if this beam is interrupted by an object, the receiver signals the control unit to stop or reverse the automation system, preventing accidents, injuries, or damage to vehicles. Key Features and Specifications:
  • Photoelectric Technology: It uses an infrared beam to detect obstructions.
  • Transmitter (TX) and Receiver (RX): Comes as a pair, with one unit transmitting the beam and the other receiving it.
  • Relay Output: It's a relay photocell, meaning it sends a signal to the control unit via a relay output.
  • Range: Typically has a useful range of 15 meters, which can be extended up to 30 meters in some configurations (e.g., by cutting a "+10m" electrical bridge). However, range can be reduced in adverse weather conditions like fog, rain, or dust.
  • Anti-Glare Circuitry: Designed with an anti-glare circuit to minimize interference from sunlight, ensuring reliable performance in various lighting conditions.
  • Durable Construction: Features an ABS body that is resistant to weather conditions, making it suitable for outdoor use (IP44 protection rating).
  • Easy Installation: Known for its simplified assembly and installation procedure. Some versions (like those with Nice BlueBUS technology) require only two wires for connection to compatible control units, simplifying wiring.
  • Wide Angle of Reception: Generally has a 10° (or 8° with a reduction cone) angle of reception, which helps in compensating for minor alignment issues.
  • Compatibility: While it's a Nice-branded product, it's often described as a "universal photocell" compatible with most gate and garage door automation systems, especially those that accept standard relay inputs. Some models also feature Nice BlueBUS technology for seamless integration with Nice control units that support it.
  • Safety Compliance: It is a Type D presence detector according to EN 12453 standard, which means it detects obstacles on the optical axis. When connected to a control unit with a "phototest" function, it can achieve Category 2 safety against malfunctions according to EN 954-1.
Installation: The Nice Era-EPM sensors are typically surface-mounted on two solid, parallel walls, facing each other to create the safety beam. Proper alignment between the transmitter and receiver is crucial for optimal operation. In essence, the Nice Era-EPM is a robust and reliable safety device designed to make automated gate and door systems safer by actively detecting obstacles in their path of operation.
Add to wishlist
Read more
Quick view
Safety sensor - P51033H
Compare

Safety sensor – P51033H

$75.75

Ship or pick up from our office.

Safety sensor - P51033H

*NO/NC *AC/DC 12-24 V *Receiving Range: 12 Meters *IP 54 *External LED flash lamp signal (AC/DC 12V-24 V) *The P51033H safety sensor included the LED flash light   The P51033H is a safety sensor, specifically a photoelectric sensor (also known as a photo eye) commonly used in automatic gate and door systems. What it Does 🚧 This sensor functions as an obstruction detection device. It consists of two parts: an emitter and a receiver. The emitter sends out an infrared light beam, and the receiver detects it. If an object (like a person, pet, or vehicle) interrupts this beam, the sensor sends a signal to the gate or door's control board, causing it to stop or reverse its movement, preventing potential injury or damage.   Key Specifications ⚙️ Here are some of the technical details for the P51033H:
  • Working Voltage: 12~24VAC/DC
  • Working Current (24VDC):
    • Emitter:
    • Receiver:
  • Photocell Wavelength: (infrared)
  • Angle of Opposite Emission:
  • Receiver Range: (this range can be reduced by about in adverse weather conditions like fog, rain, or dust)
  • Working Temperature:
  • Relay Contact Loading Capacity:
  • Waterproof Grade: IP54
  • Size:
  • Outputs: NO/NC (Normally Open/Normally Closed) contacts
  Installation Considerations 🛠️ For optimal performance, the P51033H should be installed:
  • Height: More than above the ground to prevent false reflections.
  • Distance between Emitter and Receiver: More than meters to ensure proper operation.
  • Sunlight: The receiver should be installed away from direct sunlight or other strong light sources () to maintain stable operation.
  • Multiple Sensors: If multiple photocells are installed on the same line, receivers can be placed at both ends and emitters in the middle, back-to-back, to prevent interference.
  • Firm Installation: Install the photocell firmly to avoid signal bias between the emitter and receiver, which could lead to malfunctions.
  Safety Importance 🛡️ Safety sensors like the P51033H are crucial for automated systems like gates and doors. They provide a vital layer of protection, ensuring that the system stops or reverses if an obstacle is detected, thereby preventing accidents, injuries, and property damage.
Add to wishlist
Add to cart
Quick view
Safety sensor FT2008
Compare

Safety sensor FT2008

$94.30

Ship or pick up from our office.

Safety sensor FT2008

*NO/NC *AC/DC 12-24 V *Receiving Range: 15 Meters *IP 44
A gate opener safety sensor is a device designed to detect objects or people in the path of an automatic gate and prevent it from closing or hitting them, ensuring safety and preventing damage or injury.
These sensors can be photoelectric, pressure sensors, magnetic sensors, or loop detectors and are crucial for preventing accidents and ensuring smooth gate operation. 

Types of Gate Opener Safety Sensors:

  • Photoelectric Sensors:
    These sensors use an infrared beam to detect objects. When the beam is broken by an object, the gate opener is signaled to stop or reverse. 
  • Pressure Sensors:
    These sensors are typically located along the edge of the gate and detect pressure when the gate comes into contact with an object. 
  • Magnetic Sensors:
    These sensors use a magnetic field to detect the presence of vehicles or objects near the gate. 
  • Loop Detectors:
    These sensors use a wire loop buried in the ground near the gate. When a vehicle or object passes over the loop, it triggers the gate to stop or reverse. 
How They Work:
  1. Detection: The sensor detects the presence of an object or person in the gate's path. 
  2. Signal: The sensor sends a signal to the gate operator. 
  3. Action: The gate operator responds by stopping, reversing, or remaining open, depending on the sensor type and programmed settings. 
Importance of Safety Sensors:
  • Prevent Accidents: They protect people and vehicles from being hit by the gate. 
  • Prevent Damage: They help avoid damage to the gate, vehicles, or property. 
  • Ensure Reliable Operation: They contribute to the smooth and safe operation of the gate. 
Add to wishlist
Add to cart
Quick view
Safety sensor VDS-TEC2
Compare

Safety sensor VDS-TEC2

$88.30

Ship or pick up from our office.

Safety sensor VDS-TEC2

Technical Details:
  • NO/NC
  • AC/DC 12-24 V
  • Receiving Range: 15 Meters
  • IP 44
Universal light with barriers for any door design automation. The range can be reduced to 30% in bad weather conditions: fog, rain, dust, etc. Compatible with all models of gate openers, such as single swing, double swing, and sliding gates. When someone passes the infrared region, the detector will send an alarm signal to the control board(which is not included).
  • Compact
  • Lightweight
  • Portable
  • Easy to use
Safety sensor VDS-TEC2 works with our SIMPLY sliding gate operator or EGO swing gate opener, and all different sliding gate openers and swing gate operator brands. The VDS-TEC2 is a type of photoelectric safety sensor primarily used in automated gate and door systems, including swing and sliding gates.
Here's a breakdown of its key characteristics:
  • Function: It works by emitting an infrared light beam between two units: a sender and a receiver. If an object (like a person or vehicle) breaks this invisible beam, the sensor detects the interruption.
  • Safety Feature: When the beam is broken, the VDS-TEC2 sends a signal to the gate's control board. This triggers an action, most commonly preventing the gate from closing to avoid accidents or activating an alarm.
  • Applications: Its main application is in enhancing the safety of automated gates and doors in various settings, ensuring that they don't close on obstructions. It is compatible with different models of gate openers.
  • Technical Specifications:
    • Contacts: NO/NC (Normally Open/Normally Closed)
    • Power Supply: AC/DC 12-24 V
    • Receiving Range: Up to 15 meters (this range can be reduced in adverse weather conditions like fog, rain, or dust).
    • IP Rating: IP44 (meaning it's protected against solid objects larger than 1mm and against splashing water from any direction).
  • Design: It's described as compact, lightweight, portable, and easy to use.
In essence, the VDS-TEC2 acts as a crucial safety mechanism to prevent accidents and damage in automated gate and door operations.
Add to wishlist
Add to cart
Quick view

Related products

Exit Button SQTPB801
Compare

Exit Button SQTPB801

$22.85

Ship or pick up from our office.

Exit Button SQTPB801

*Touch *Backlight *DC 12V *COM-NC-NO
An exit button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms. 
Here's a more detailed explanation:
  • Function:
    An exit button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit. 
  • Purpose:
    They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available. 
  • Types:
    Exit buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them. 
  • Importance:
    These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals. 
  • Applications:
    Exit buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities. 
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view
Keypad Access Control K155ST15
Compare

Keypad Access Control K155ST15

$99.90

Ship or pick up from our office.

Keypad Access Control K155ST15

*Rain Shield Cover included *EM/ID card/tag reader *Finger Touch *Backlight *2000 Users *DC 12 V *IP 67 (Waterproof) *Doorbell button This unit is a standalone access controller or a Wiegand output keypad/card reader suitable for mounting indoors or outdoors, even in harsh environments. It features a sturdy, vandal proof Zinc Alloy electroplated case available in bright silver or matte silver finishes. The electronics are fully potted, ensuring durability. With support for up to 2000 users in Card, PIN, or Card + PIN configurations, this unit is ideal for small shops, domestic households, as well as commercial and industrial applications such as factories, warehouses, laboratories, banks, and prisons. Key Features
  • Waterproof: IP68 rated for outdoor use
  • Material: Strong Zinc Alloy Electroplated anti vandal case
  • User Capacity: 2000 users, supports Card, PIN, Card + PIN
  • Adjustable Timers: Door output time, Alarm time, Door Open time
  • Short Circuit Protection: Lock output current short circuit protection
  • Built in Features: Light dependent resistor (LDR) for anti tamper, built in buzzer
  • LED Status Indicators: Red, Yellow, and Green LEDs display the working status
Technical Specifications
  • Operating Voltage: DC 12V ±10%
  • User Capacity: 2000
  • Card Reading Distance: 3 6 cm
  • Active Current: < 60mA
  • Idle Current: 25 ± 5mA
  • Lock Output Load: Max 3A
  • Alarm Output Load: Max 20A
  • Operating Temperature: 45 60
  • Operating Humidity: 10% 90% RH
  • Adjustable Door Relay Time: 0 99 seconds
  • Adjustable Alarm Time: 0 3 minutes
  • Wiegand Interface: Wiegand 26 bit
  • Size: 120 x 76 x 23mm
  • Wiring Connections: Electric Lock, Exit Button, External Alarm, External Reader
Add to wishlist
Add to cart
Quick view
Wifi gate opener
Compare

WiFi Gate/Door controller

$76.80
Add to wishlist
Add to cart
Quick view
Exit push button SQTPB701H
Compare

Exit Push Button SQTPB701H

$29.75

Ship or pick up from our office.

Exit Push Button SQTPB701H

*No Touch *Backlight *DC 12V *COM-NC-NO
A wave exit push button, also known as a touchless exit button or wave-to-exit switch, is a device that allows users to open a door without physically touching it.
It uses motion sensing technology, typically infrared or microwave, to detect a hand gesture and trigger the door to open. This provides a more hygienic and convenient way to exit a space, especially in environments where minimizing physical contact is desirable. 
Here's a more detailed explanation:
Functionality:
  • Touchless Activation:
    The core function is to activate a door release mechanism (like a magnetic lock or strike) with a simple wave of the hand. 
  • Motion Sensing:
    Wave exit buttons utilize sensors (infrared or microwave) to detect the movement of a hand or object in front of the device. 
  • Contactless Exit:
    This eliminates the need to physically push a button, reducing the spread of germs and providing a more hygienic exit solution. 
Common Applications:
  • Healthcare facilities: Hospitals, clinics, and laboratories where hygiene is paramount. 
  • Food service and preparation areas: Restaurants and kitchens where cleanliness is crucial. 
  • High-traffic areas: Office buildings, schools, and public spaces where many people need to exit frequently. 
  • Disabled access: Provides a convenient and accessible way for individuals with mobility limitations to exit. 
Benefits:
  • Hygiene:
    Reduces the risk of spreading germs and viruses by eliminating the need to touch a button. 
  • Convenience:
    Allows for hands-free operation, making it easier to exit with arms full or for individuals with mobility limitations. 
  • Durability:
    Often more durable than traditional push buttons due to fewer moving parts. 
  • Accessibility:
    Provides a more inclusive exit solution for all individuals. 
Add to wishlist
Add to cart
Quick view
USB Gate Operator Remote
Compare

USB Gate Operator Remote

$107.30

USB Gate Operator Remote

A USB gate operator remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car's USB port and using it as a remote. USB Gate Operator Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. Here's a more detailed explanation: -How it works: USB Dongle: The device typically includes a small USB dongle that plugs into your car's USB port. Sensing Signal: When the USB is plugged in and the car is in the "on" mode, the dongle emits a sensing signal. Receiver: The signal is received by a unit connected to the driveway gate motor. Gate Motor Activation: The receiver then activates the gate motor, causing the driveway gate to open or close. -Key features: Dual Control Modes: Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle. Compact and Portable: The USB dongle is small and lightweight, making it easy to use and store in your car. Easy Installation: It's designed for simple plug-and-play functionality, requiring no complex setup. Replacement Accessory: It serves as a convenient replacement for traditional gate remote controls.
Add to wishlist
Add to cart
Quick view
Hot
swing gate opener NICE Wingo 4024
Compare

Double Swing Gate Opener NICE -Wingo 4024

,
$1,363.45

Ship or pick up from our office.

Product Sheet PDF

Double Swing Gate Opener NICE -Wingo 4024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Operators are designed to fit a wide range of settings and applications. The Double Swing Gate Opener NICE - Wingo 4024 is an electromechanical gear motor system designed for automating double swing gates. It's primarily used for residential and light industrial applications, offering a convenient and secure way to open and close gates without manual effort. Here's a breakdown of its key features and specifications: Key Features
  • Electromechanical Gear Motor: It utilizes a 24 Vdc electromechanical gear motor, known for its reliability and quiet operation.
  • Suitable for Various Gate Sizes: It can handle swing gates with individual leaves up to 2 meters in length or up to 400 kg in weight (for a gate leaf of 1 meter).
  • Surface Mounted: The system is designed for surface mounting, meaning the motors are installed directly onto the gate posts or pillars.
  • Easy Installation: Electrical connections are made from above the gear motor, simplifying the installation process.
  • User-Friendly Release: In case of a power failure, the gate can be manually unblocked and moved with a personalized Nice key or standard lock (optional).
  • Moonclever Control Unit (MC424L/MC824H): This advanced control unit offers several intelligent functions:
    • Simple Programming: Easy setup with a single button.
    • Automatic Memorization: Self-learning function for limit switches on opening and closing.
    • Anti-Crush Safety: Features a clutch with an anti-crush safety device to prevent damage or injury.
    • Obstacle Detection: Uses dual technology to detect obstacles during operation.
    • Programmable Functions: Allows for programming of pause time, pedestrian pass door function, and deceleration at the beginning and end of cycles.
    • Battery Backup Option: Can operate during power failures with optional rechargeable batteries (PS124/PS324) that fit inside the control unit.
    • Resistive Sensitive Edge Connection: Can be connected to 8.2 KOhm resistive sensitive edges for enhanced safety.
  • Durable Construction: Features tough aluminum shells with polyester paint finish, making it resistant to atmospheric agents. Internal moving parts are made of steel, light alloys, and techno-polymers for durability.
  • Mechanical Limit Switches: Includes pre-assembled mechanical limit switches for setting the open position.
Add to wishlist
Add to cart
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Manual release key *1 x Safety sensor
A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view