Diode 1N5408
Click to enlarge
Programmable timer relay
Programmable timer relay $40.80
Back to products
PIR Infrared Sensor – wireless
PIR Infrared Sensor – wireless $129.90

Diode 1N5408

$4.45

Ship or pick up from our office.

Diode 1N5408

The 1N5408 is a common general-purpose rectifier diode. It’s designed to allow electric current to flow primarily in one direction, making it crucial for converting alternating current (AC) to direct current (DC). Think of it like a one-way valve for electricity.

It belongs to the 1N540x series of power diodes, known for their ability to handle relatively high current and voltage.

Here are its key characteristics and common uses:

Key Features

  • High Reverse Voltage Rating: It can withstand a maximum repetitive reverse voltage () of 1000V. This means it can block high voltages when current tries to flow in the “wrong” direction.
  • High Forward Current Capacity: It’s rated for an average rectified forward current () of 3 Amperes (A). This indicates it can handle a significant amount of current flowing through it in the correct direction.
  • High Surge Current Capability: The 1N5408 can handle non-repetitive peak forward surge currents () of up to 200A for short durations, protecting circuits from sudden power spikes.
  • Low Forward Voltage Drop: When conducting, it has a relatively low forward voltage drop () of approximately 1.0V to 1.2V at its rated current. A lower voltage drop means less power is lost as heat.
  • Standard Recovery: It’s a “standard recovery” diode, meaning its switching speed is relatively slow compared to fast recovery diodes. This makes it suitable for power rectification at lower frequencies (like 50/60 Hz AC).
  • DO-201 Package: It typically comes in a DO-201 axial-leaded package, which is a through-hole component with leads extending from both ends, allowing for easy mounting on circuit boards.
  • Wide Operating Temperature Range: It can operate and be stored in a wide temperature range, typically from -65°C to +175°C.

 

Applications

The robust nature of the 1N5408 makes it a staple in various electronic designs:

  • Power Supplies and Rectifiers: This is its primary application. It efficiently converts AC input voltage into pulsating DC, which can then be smoothed by capacitors to provide a stable DC output for electronic devices. This includes full-wave and half-wave rectifier circuits.
  • Battery Chargers: Used to convert AC wall power into DC for charging batteries.
  • Voltage Regulation Circuits: Helps in maintaining a stable output voltage by rectifying current.
  • Protection Circuits: Its ability to block reverse current makes it useful for reverse polarity protection, preventing damage to sensitive components if the power supply is connected incorrectly.
  • Freewheeling Diode: Used in inductive circuits (like those with relays or motors) to provide a path for stored energy to dissipate when the current is switched off, preventing voltage spikes that could damage other components.
  • Voltage Doubler Circuits: Can be used in circuits designed to effectively double the input voltage.
Compare
Add to wishlist
Category: Tags: , , , ,
Description

Diode 1N5408

*3 Amp

*1000 Volt

The 1N5408 is a rectifier diode, a type of semiconductor device that allows current to flow in one direction.
It is commonly used in power supplies and other applications to convert alternating current (AC) to direct current (DC). The 1N5408 is rated for a maximum forward current of 3A and a reverse voltage of 1000V.

It is a standard recovery diode, meaning it has a relatively slow switching speed. 

Key Features and Characteristics:
  • Rectification: The primary function of the 1N5408 is to rectify AC voltage, converting it to DC voltage. 
  • Current Rating: It is rated for a forward current of 3A. 
  • Voltage Rating: It can withstand a reverse voltage of 1000V. 
  • Standard Recovery: It’s a standard recovery diode, which means it has a slower switching speed compared to fast recovery diodes. 
  • Applications: Commonly used in power supplies, voltage regulation circuits, and other applications where rectification is needed. 
  • Low Forward Voltage Drop: The 1N5408 has a relatively low forward voltage drop, which minimizes power loss during rectification. 
  • High Surge Current Capability: It can handle high surge currents, making it suitable for applications with transient voltage spikes. 
In simpler terms:
Think of the 1N5408 as a one-way valve for electricity. It allows current to flow in one direction (from anode to cathode) but blocks it from flowing in the opposite direction. 
This property is crucial for converting AC power (which changes direction) into DC power (which flows in one direction). The 1N5408 is a robust diode that can handle a relatively high amount of current and voltage, making it suitable for many common electronic circuits. 
Additional information
Weight 0.01 kg
Dimensions 5 × 2 × 0.5 cm
Model

1N5408
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Diode 1N5408”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Metal Case Diode Bridge KBPC5010
Compare

Metal Case Diode Bridge KBPC5010

$26.25

Ship or pick up from our office.

Metal Case Diode Bridge KBPC5010

The Metal Case Diode Bridge KBPC5010 is a specific type of bridge rectifier, a crucial electronic component used to convert alternating current (AC) into direct current (DC). It is widely employed in various power supply applications. Here's a breakdown of its key features and what each part of its name signifies: What is a Bridge Rectifier? A bridge rectifier is a circuit of four (or more) diodes in a specific configuration that allows for full-wave rectification. This means it efficiently converts both the positive and negative half-cycles of an AC input into a pulsating DC output. Compared to simpler half-wave rectifiers, bridge rectifiers are more efficient and provide a smoother DC output.
Image of
KBPC5010 Explained
  • KBPC: This is typically a series designation for a family of single-phase bridge rectifiers with specific package styles.
  • 50: This number indicates the maximum average forward rectified current (Io) the device can handle, which in this case is 50 Amperes (A). This high current rating makes it suitable for demanding applications.
  • 10: This number typically refers to the voltage class, often indicating a maximum repetitive peak reverse voltage (VRRM) of 1000 Volts (V) (where '10' often means 10 x 100V). This high voltage rating allows it to handle substantial AC input voltages.
Metal Case Design The "metal case" is a significant feature. The metal housing serves as a heat sink, which is essential for dissipating the heat generated by the diodes during operation, especially when handling high currents. This helps maintain optimal operating temperatures, ensuring the device's reliability and longevity. The case often has a central mounting hole for easy attachment to an external heat sink for even better thermal management. The internal components are usually encapsulated with epoxy resin for electrical insulation and flame resistance. Key Specifications and Features
  • Conversion: Converts single-phase AC to pulsating DC.
  • Current Rating: Up to 50 Amperes (A) average forward current.
  • Voltage Rating: Up to 1000 Volts (V) repetitive peak reverse voltage.
  • Surge Current Capability: Often capable of handling high non-repetitive surge currents (e.g., 400A or 450A for a short duration), which is crucial for handling initial power-on transients.
  • Low Forward Voltage Drop: Minimizes power loss and improves efficiency.
  • High Reliability: Designed for robust performance in various environments.
  • Mounting: Typically features through-hole mounting with a screw hole for chassis or heatsink mounting.
  • Terminals: Often uses 0.25" (6.35 mm) Faston terminals for easy connection. Some variants (like KBPC5010W) might have wire leads.
  • Operating Temperature: Wide operating junction temperature range, often from -40°C to +150°C.
Common Applications Due to its high current and voltage capabilities, the KBPC5010 is commonly found in:
  • Power supplies: As a core component to rectify AC mains voltage into DC for electronic devices.
  • Battery chargers: Converting AC power to DC for charging batteries.
  • Motor control circuits: Providing DC power for electric motors.
  • Industrial control systems: Used in various industrial applications requiring AC-to-DC conversion.
  • Input rectifiers for variable frequency drives (VFDs).
Add to wishlist
Add to cart
Quick view
Diode Bridge GBU808
Compare

Diode Bridge GBU808

$11.80

Ship or pick up from our office.

Diode Bridge GBU808

*8A *800V *Single Phase *Rectifier IC Chip
Add to wishlist
Add to cart
Quick view
Diode 1N4007
Compare

Diode 1N4007

$1.85

Ship or pick up from our office.

Diode 1N4007

The 1N4007 is a very common and versatile silicon rectifier diode. It's part of the 1N400x series of general-purpose diodes, with the "7" indicating its specific voltage rating. Key Characteristics
  • Rectifier Diode: Its primary function is to convert alternating current (AC) into pulsating direct current (DC) by allowing current to flow in only one direction.
  • High Reverse Voltage Rating: The 1N4007 can withstand a peak repetitive reverse voltage () of 1000V. This makes it suitable for high-voltage applications.
  • Average Forward Current: It can handle an average forward current () of 1 Ampere (1A).
  • Forward Voltage Drop: When conducting in the forward direction, it has a relatively low forward voltage drop () of approximately 0.7V to 1.1V. This voltage drop represents the power lost within the diode.
  • Surge Current Capability: It can handle a non-repetitive peak surge current () of up to 30A for short durations, which is useful for handling initial power-on surges.
  • Package Type: It typically comes in a DO-41 axial-lead package, which is a small, cylindrical plastic package with leads on both ends.
  • Operating Temperature Range: It operates reliably over a wide temperature range, typically from -55°C to +175°C.
How it Works Like all diodes, the 1N4007 is a PN-junction device. It consists of a P-type semiconductor and an N-type semiconductor joined together.
  • Forward Bias: When a positive voltage is applied to the anode (P-side) and a negative voltage to the cathode (N-side), the diode is forward-biased. If the applied voltage exceeds the forward voltage drop (around 0.7V for silicon diodes), the diode conducts, allowing current to flow from anode to cathode.
  • Reverse Bias: When a negative voltage is applied to the anode and a positive voltage to the cathode, the diode is reverse-biased. In this state, the diode acts like an open switch, blocking current flow. The 1N4007 is designed to withstand up to 1000V in this reverse-biased state before breaking down.
Common Applications The 1N4007's robust characteristics make it popular in a wide range of electronic circuits, including:
  • Rectifier Circuits:
    • Half-wave and Full-wave Rectifiers: Essential for converting AC power from the mains (like in household appliances) to DC power for electronic devices.
    • Bridge Rectifiers: Used to convert the entire AC waveform into pulsating DC, achieving more efficient rectification.
  • Power Supplies: Used for rectifying the AC input in power supply units to provide DC voltage to various components.
  • Voltage Protection:
    • Reverse Polarity Protection: Prevents damage to circuits if the power supply is connected with incorrect polarity.
    • Freewheeling Diodes (Flyback Diodes): Protect sensitive components from voltage spikes generated by inductive loads (like relays, motors, and solenoids) when their magnetic field collapses.
    • Voltage Spike Suppression: Helps to suppress transient voltage spikes that can occur due to switching events or lightning, safeguarding delicate electronics.
  • Inverters and Converters: Used in various power conversion circuits.
  • Current Flow Regulation: Can be used in simple current limiting or flow control applications.
Due to its high reverse voltage rating, the 1N4007 is often a go-to choice when a general-purpose rectifier diode is needed, especially in circuits that might experience higher voltages.
Add to wishlist
Add to cart
Quick view

Related products

USB Gate Operator Remote
Compare

USB Gate Operator Remote

$107.30

USB Gate Operator Remote

A USB gate operator remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car's USB port and using it as a remote. USB Gate Operator Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. Here's a more detailed explanation: -How it works: USB Dongle: The device typically includes a small USB dongle that plugs into your car's USB port. Sensing Signal: When the USB is plugged in and the car is in the "on" mode, the dongle emits a sensing signal. Receiver: The signal is received by a unit connected to the driveway gate motor. Gate Motor Activation: The receiver then activates the gate motor, causing the driveway gate to open or close. -Key features: Dual Control Modes: Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle. Compact and Portable: The USB dongle is small and lightweight, making it easy to use and store in your car. Easy Installation: It's designed for simple plug-and-play functionality, requiring no complex setup. Replacement Accessory: It serves as a convenient replacement for traditional gate remote controls.
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS MP110
Compare

Dual swing gate opener -VDS MP110

,
$1,230.35

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener -VDS MP110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view
Wifi gate opener
Compare

WiFi Gate/Door controller

$76.80
Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view
Safety sensor VDS-TEC2
Compare

Safety sensor VDS-TEC2

$88.30

Ship or pick up from our office.

Safety sensor VDS-TEC2

Technical Details:
  • NO/NC
  • AC/DC 12-24 V
  • Receiving Range: 15 Meters
  • IP 44
Universal light with barriers for any door design automation. The range can be reduced to 30% in bad weather conditions: fog, rain, dust, etc. Compatible with all models of gate openers, such as single swing, double swing, and sliding gates. When someone passes the infrared region, the detector will send an alarm signal to the control board(which is not included).
  • Compact
  • Lightweight
  • Portable
  • Easy to use
Safety sensor VDS-TEC2 works with our SIMPLY sliding gate operator or EGO swing gate opener, and all different sliding gate openers and swing gate operator brands.
Add to wishlist
Add to cart
Quick view
Wireless Keypad Access Control KW200
Compare

Wireless Keypad Access Control KW200

$127.80

Wireless Keypad Access Control KW200

Wireless keypad access control systems replace traditional keys with a digital PIN code entry for building access, eliminating the need for physical keys and enhancing security.
These systems often include features like remote management via smart devices, audit trails of access events, and integration with other security systems like intercoms. 
Here's a more detailed breakdown:
Core Functionality:
  • Keyless Entry:
    Users enter a unique PIN code into a keypad to unlock a door or gate. 
  • Wireless Communication:
    The keypad communicates wirelessly with a receiver or controller, eliminating the need for extensive wiring. 
  • Remote Management:
    Many systems allow administrators to manage access permissions, view audit trails, and adjust settings remotely via a smartphone app or computer. 
  • Integration:
    Some systems can integrate with intercoms, surveillance cameras, and other security components for a more comprehensive solution. 
Key Features:
  • PIN Codes: Users are assigned unique PIN codes for entry. 
  • Proximity Cards/Fobs: Some systems also support access via proximity cards or fobs for users who prefer that method. 
  • Audit Trails: The system can record and store data about who accessed the door, when, and how, providing a valuable security record. 
  • Weatherproof and Durable: Many outdoor keypads are designed to withstand harsh weather conditions and vandalism. 
  • Backlit Keypads: Backlit keypads make it easier to use the system in low-light conditions. 
Types of Wireless Keypad Access Control:
  • Stand-Alone Systems: These systems are self-contained and don't require connection to a central system. 
  • Integrated Systems: These systems are part of a larger access control or building management system. 
  • Wired and Wireless Hybrid: Some systems combine wired and wireless components for added flexibility. 
Benefits:
  • Enhanced Security: Eliminates the risk of lost or stolen keys.
  • Increased Convenience: Users don't need to carry keys.
  • Improved Auditability: Tracks access events for security monitoring.
  • Remote Management: Allows for easy administration and control. 
Add to wishlist
Add to cart
Quick view
Swing gate opener -Zero ZSW400
Compare

Dual swing gate opener -Zero ZSW400

,
$1,237.15

Ship or pick up from our office.

Dual swing gate opener -Zero ZSW400

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view