Diode 1N4007
Click to enlarge
Programmable timer relay
Programmable timer relay $40.80
Back to products
PIR Infrared Sensor – wireless
PIR Infrared Sensor – wireless $129.90

Diode 1N4007

$1.85

Ship or pick up from our office.

Diode 1N4007

The 1N4007 is a very common and versatile silicon rectifier diode. It’s part of the 1N400x series of general-purpose diodes, with the “7” indicating its specific voltage rating.

Key Characteristics

  • Rectifier Diode: Its primary function is to convert alternating current (AC) into pulsating direct current (DC) by allowing current to flow in only one direction.
  • High Reverse Voltage Rating: The 1N4007 can withstand a peak repetitive reverse voltage () of 1000V. This makes it suitable for high-voltage applications.
  • Average Forward Current: It can handle an average forward current () of 1 Ampere (1A).
  • Forward Voltage Drop: When conducting in the forward direction, it has a relatively low forward voltage drop () of approximately 0.7V to 1.1V. This voltage drop represents the power lost within the diode.
  • Surge Current Capability: It can handle a non-repetitive peak surge current () of up to 30A for short durations, which is useful for handling initial power-on surges.
  • Package Type: It typically comes in a DO-41 axial-lead package, which is a small, cylindrical plastic package with leads on both ends.
  • Operating Temperature Range: It operates reliably over a wide temperature range, typically from -55°C to +175°C.

How it Works

Like all diodes, the 1N4007 is a PN-junction device. It consists of a P-type semiconductor and an N-type semiconductor joined together.

  • Forward Bias: When a positive voltage is applied to the anode (P-side) and a negative voltage to the cathode (N-side), the diode is forward-biased. If the applied voltage exceeds the forward voltage drop (around 0.7V for silicon diodes), the diode conducts, allowing current to flow from anode to cathode.
  • Reverse Bias: When a negative voltage is applied to the anode and a positive voltage to the cathode, the diode is reverse-biased. In this state, the diode acts like an open switch, blocking current flow. The 1N4007 is designed to withstand up to 1000V in this reverse-biased state before breaking down.

Common Applications

The 1N4007’s robust characteristics make it popular in a wide range of electronic circuits, including:

  • Rectifier Circuits:
    • Half-wave and Full-wave Rectifiers: Essential for converting AC power from the mains (like in household appliances) to DC power for electronic devices.
    • Bridge Rectifiers: Used to convert the entire AC waveform into pulsating DC, achieving more efficient rectification.
  • Power Supplies: Used for rectifying the AC input in power supply units to provide DC voltage to various components.
  • Voltage Protection:
    • Reverse Polarity Protection: Prevents damage to circuits if the power supply is connected with incorrect polarity.
    • Freewheeling Diodes (Flyback Diodes): Protect sensitive components from voltage spikes generated by inductive loads (like relays, motors, and solenoids) when their magnetic field collapses.
    • Voltage Spike Suppression: Helps to suppress transient voltage spikes that can occur due to switching events or lightning, safeguarding delicate electronics.
  • Inverters and Converters: Used in various power conversion circuits.
  • Current Flow Regulation: Can be used in simple current limiting or flow control applications.

Due to its high reverse voltage rating, the 1N4007 is often a go-to choice when a general-purpose rectifier diode is needed, especially in circuits that might experience higher voltages.

Compare
Add to wishlist
Category: Tags: , , , ,
Description

Diode 1N4007

*1 Amp

*24 Volt

The rectifier diode 1N4007 is a general-purpose rectifier diode widely used in electronic circuits for converting alternating current (AC) to direct current (DC). 

It’s a common component found in power supplies and other applications requiring rectification or reverse polarity protection. The 1N4007 can handle a 1 Ampere (1A) forward current and a 1000 Volt (1000V) reverse voltage, making it suitable for a variety of applications. 

Here’s a more detailed breakdown of the rectifier diode 1N4007:
  • Rectification:

    The 1N4007, like all diodes, allows current to flow in one direction, which is crucial for converting AC to DC. 

  • Reverse Voltage Protection:

    It can also protect circuits from damage caused by reverse voltage, meaning it prevents current from flowing backward. 

  • General Purpose:

    Its specifications make it versatile for use in various electronic devices and circuits, including power supplies, voltage converters, and more. 

  • 1A, 1000V:

    The 1N4007 is rated for a maximum forward current of 1 Ampere and a maximum reverse voltage of 1000 Volts. 

  • DO-41 Package:
    It is typically housed in a DO-41 axial package, which is a standard cylindrical shape for diodes. 
Additional information
Weight 0.009 kg
Dimensions 4 × 1 × 2 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Diode 1N4007”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Diode Bridge GBU808
Compare

Diode Bridge GBU808

$11.80

Ship or pick up from our office.

Diode Bridge GBU808

*8A *800V *Single Phase *Rectifier IC Chip
Add to wishlist
Add to cart
Quick view
Diode 1N5408
Compare

Diode 1N5408

$4.45

Ship or pick up from our office.

Diode 1N5408

The 1N5408 is a common general-purpose rectifier diode. It's designed to allow electric current to flow primarily in one direction, making it crucial for converting alternating current (AC) to direct current (DC). Think of it like a one-way valve for electricity. It belongs to the 1N540x series of power diodes, known for their ability to handle relatively high current and voltage. Here are its key characteristics and common uses: Key Features
  • High Reverse Voltage Rating: It can withstand a maximum repetitive reverse voltage () of 1000V. This means it can block high voltages when current tries to flow in the "wrong" direction.
  • High Forward Current Capacity: It's rated for an average rectified forward current () of 3 Amperes (A). This indicates it can handle a significant amount of current flowing through it in the correct direction.
  • High Surge Current Capability: The 1N5408 can handle non-repetitive peak forward surge currents () of up to 200A for short durations, protecting circuits from sudden power spikes.
  • Low Forward Voltage Drop: When conducting, it has a relatively low forward voltage drop () of approximately 1.0V to 1.2V at its rated current. A lower voltage drop means less power is lost as heat.
  • Standard Recovery: It's a "standard recovery" diode, meaning its switching speed is relatively slow compared to fast recovery diodes. This makes it suitable for power rectification at lower frequencies (like 50/60 Hz AC).
  • DO-201 Package: It typically comes in a DO-201 axial-leaded package, which is a through-hole component with leads extending from both ends, allowing for easy mounting on circuit boards.
  • Wide Operating Temperature Range: It can operate and be stored in a wide temperature range, typically from -65°C to +175°C.
  Applications The robust nature of the 1N5408 makes it a staple in various electronic designs:
  • Power Supplies and Rectifiers: This is its primary application. It efficiently converts AC input voltage into pulsating DC, which can then be smoothed by capacitors to provide a stable DC output for electronic devices. This includes full-wave and half-wave rectifier circuits.
  • Battery Chargers: Used to convert AC wall power into DC for charging batteries.
  • Voltage Regulation Circuits: Helps in maintaining a stable output voltage by rectifying current.
  • Protection Circuits: Its ability to block reverse current makes it useful for reverse polarity protection, preventing damage to sensitive components if the power supply is connected incorrectly.
  • Freewheeling Diode: Used in inductive circuits (like those with relays or motors) to provide a path for stored energy to dissipate when the current is switched off, preventing voltage spikes that could damage other components.
  • Voltage Doubler Circuits: Can be used in circuits designed to effectively double the input voltage.
Add to wishlist
Add to cart
Quick view
Metal Case Diode Bridge KBPC5010
Compare

Metal Case Diode Bridge KBPC5010

$26.25

Ship or pick up from our office.

Metal Case Diode Bridge KBPC5010

The Metal Case Diode Bridge KBPC5010 is a specific type of bridge rectifier, a crucial electronic component used to convert alternating current (AC) into direct current (DC). It is widely employed in various power supply applications. Here's a breakdown of its key features and what each part of its name signifies: What is a Bridge Rectifier? A bridge rectifier is a circuit of four (or more) diodes in a specific configuration that allows for full-wave rectification. This means it efficiently converts both the positive and negative half-cycles of an AC input into a pulsating DC output. Compared to simpler half-wave rectifiers, bridge rectifiers are more efficient and provide a smoother DC output.
Image of
KBPC5010 Explained
  • KBPC: This is typically a series designation for a family of single-phase bridge rectifiers with specific package styles.
  • 50: This number indicates the maximum average forward rectified current (Io) the device can handle, which in this case is 50 Amperes (A). This high current rating makes it suitable for demanding applications.
  • 10: This number typically refers to the voltage class, often indicating a maximum repetitive peak reverse voltage (VRRM) of 1000 Volts (V) (where '10' often means 10 x 100V). This high voltage rating allows it to handle substantial AC input voltages.
Metal Case Design The "metal case" is a significant feature. The metal housing serves as a heat sink, which is essential for dissipating the heat generated by the diodes during operation, especially when handling high currents. This helps maintain optimal operating temperatures, ensuring the device's reliability and longevity. The case often has a central mounting hole for easy attachment to an external heat sink for even better thermal management. The internal components are usually encapsulated with epoxy resin for electrical insulation and flame resistance. Key Specifications and Features
  • Conversion: Converts single-phase AC to pulsating DC.
  • Current Rating: Up to 50 Amperes (A) average forward current.
  • Voltage Rating: Up to 1000 Volts (V) repetitive peak reverse voltage.
  • Surge Current Capability: Often capable of handling high non-repetitive surge currents (e.g., 400A or 450A for a short duration), which is crucial for handling initial power-on transients.
  • Low Forward Voltage Drop: Minimizes power loss and improves efficiency.
  • High Reliability: Designed for robust performance in various environments.
  • Mounting: Typically features through-hole mounting with a screw hole for chassis or heatsink mounting.
  • Terminals: Often uses 0.25" (6.35 mm) Faston terminals for easy connection. Some variants (like KBPC5010W) might have wire leads.
  • Operating Temperature: Wide operating junction temperature range, often from -40°C to +150°C.
Common Applications Due to its high current and voltage capabilities, the KBPC5010 is commonly found in:
  • Power supplies: As a core component to rectify AC mains voltage into DC for electronic devices.
  • Battery chargers: Converting AC power to DC for charging batteries.
  • Motor control circuits: Providing DC power for electric motors.
  • Industrial control systems: Used in various industrial applications requiring AC-to-DC conversion.
  • Input rectifiers for variable frequency drives (VFDs).
Add to wishlist
Add to cart
Quick view

Related products

Wireless Keypad Access Control KW200
Compare

Wireless Keypad Access Control KW200

$127.80

Wireless Keypad Access Control KW200

Wireless keypad access control systems replace traditional keys with a digital PIN code entry for building access, eliminating the need for physical keys and enhancing security.
These systems often include features like remote management via smart devices, audit trails of access events, and integration with other security systems like intercoms. 
Here's a more detailed breakdown:
Core Functionality:
  • Keyless Entry:
    Users enter a unique PIN code into a keypad to unlock a door or gate. 
  • Wireless Communication:
    The keypad communicates wirelessly with a receiver or controller, eliminating the need for extensive wiring. 
  • Remote Management:
    Many systems allow administrators to manage access permissions, view audit trails, and adjust settings remotely via a smartphone app or computer. 
  • Integration:
    Some systems can integrate with intercoms, surveillance cameras, and other security components for a more comprehensive solution. 
Key Features:
  • PIN Codes: Users are assigned unique PIN codes for entry. 
  • Proximity Cards/Fobs: Some systems also support access via proximity cards or fobs for users who prefer that method. 
  • Audit Trails: The system can record and store data about who accessed the door, when, and how, providing a valuable security record. 
  • Weatherproof and Durable: Many outdoor keypads are designed to withstand harsh weather conditions and vandalism. 
  • Backlit Keypads: Backlit keypads make it easier to use the system in low-light conditions. 
Types of Wireless Keypad Access Control:
  • Stand-Alone Systems: These systems are self-contained and don't require connection to a central system. 
  • Integrated Systems: These systems are part of a larger access control or building management system. 
  • Wired and Wireless Hybrid: Some systems combine wired and wireless components for added flexibility. 
Benefits:
  • Enhanced Security: Eliminates the risk of lost or stolen keys.
  • Increased Convenience: Users don't need to carry keys.
  • Improved Auditability: Tracks access events for security monitoring.
  • Remote Management: Allows for easy administration and control. 
Add to wishlist
Add to cart
Quick view
Wireless Keypad Access Control KW402
Compare

Wireless Keypad Access Control KW402

$89.95

Ship or pick up from our office.

Wireless Keypad Access Control KW402

*Wireless *Rain Shield Cover included *2 Channels *LED Back Light *433 MHz
The Wireless Keypad Access Control KW402 is the preferred secure activation device for the Autoslide Automatic Door System. This security keypad will allow you to enter your home from the outside using a unique programmed code. Combined with the VDS and ZERO gate motor, you can have a secure and automated entryway into and out of your home or workplace. The Wireless Keypad Access Control KW402 is wireless and provides the benefit of not having to run cables through your exterior walls. It has two channels that will allow you to not only have a regular access code but also one you can change for guests to access your home. The Wireless Keypad Access Control KW402 is programmable for two separate codes up to eight digits long each. Audible beeps will alert you to an accepted code as well as an invalid code.
Specifications:
Duplicate Your Existing Remote Controllers so you always have a backup:
1.Vehicle central locking systems
2. Garage doors
3. Electronic gates
4. Electrical appliances/Home automation i.e. lights
5. Car sunroofs
6. Car/Motorbike alarms Easy to use, the 4 channel remote control system lets you take control of your gets, car, home and garage

Wireless Keypad Access Control KW402:

1,This is a dual channel transmitters that are activated only after having entered a Suitable combination.
2, The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.
3,The estimated transmission range is 200 m in open space and 35m indoors .
4, The units are designed to ensure battery life equivalent to an estimated 2 years of oper-ation considering 10 transmissions/day.

Specification Wireless Keypad Access Control KW402:

Power:6Volt DC 2PCS CR2032 Li battery Battery life:2 years (4 times operation every day)
Frequency:433.92MHz+/-75KHz
Transmitter power:1Mw
Data format:standard
Work temp:-20~+55 centidegree
Password number:0-8
Water proof level:1p54
Dimension:85*75*35mm
Weight:150g
Add to wishlist
Add to cart
Quick view
Camera Gate controller
WiFi & Camera Gate/Door controller
Compare

Camera Gate Controller

$240.50

Ship or pick up from our office.

Camera Gate Controller

● Universal gate opener/garage door opener phone remote control and 1080P Full-HD outdoor surveillance camera, all-in-one!
  • By using the Camera Gate controller realtime monitor, open and close your door openers remotely using your smartphone from anywhere, any time!
● Features 1080p resolution full high definition CMOS sensor and infrared IR LED, the wireless camera is designed for ultra-sharp clear images and monitor in complete darkness. The 24/7 live video display on your smartphone with the FREE Linkcraft APP ensures your garage or gate is safe and secure. No worry about the status of the door. ● The Camera Gate Controller works with all Gate Openers, and is compatible with most gate openers/garage door openers with External Receiver which is sold separately.
  • Multi-users monitor and control, share your WIFI camera and gate remote access with family and friends. Up to 50 cameras can be added to our APP, and you can take pictures and record videos for your gate or garage on your phone. IP44 Weatherproof - This camera is perfect for outdoor use, and works well under rough weather like storms and snow.
  • Universal smartphone remote control for gate opener/garage door opener / various household appliances / industrial devices and 1080P Full-HD outdoor surveillance camera, all-in-one！
  • Real-time monitor and control your devices using your smartphone from anywhere, any time!
  • Typical applications include opening and closing your door openers, lights, automatic feeders, water pump, and spray system remotely.
  • Features 1080p resolution full high definition CMOS sensor and infrared IR LED, the wireless camera is designed for ultra-sharp clear images and monitors in complete darkness.
  • 24/7 live video display on your smartphone with the FREE Linkcraft APP greatly ensures safety and security.
  • No worry about the status of the door or the device.
  • The wire in the controller works with most gate openers/garage door openers / various electrical equipment.
  • Multi-users monitor and control, share your WIFI camera, and remote access with family and friends.
  • Up to 50 cameras can be added to our APP, and take pictures and record videos for your device on your phone.
  • IP44 Weatherproof - This camera is perfect for outdoor use, and works well under rough weather like storms and snow.
  • Features relay output whose max contact is up to 15A/120VAC & 10A/30VDC, two modes of toggle click and self-hold are selectable.
  • You can set a timer in self-hold mode to adjust the working time of the device.
  • Add up to 128GB micro SD card (optional, SD card NOT included), the video is to be recorded day and night.
  • Easy-to-follow manual is included for quick setting up.

A camera gate controller is a system, often part of an access control system, that combines a camera with the ability to control gate or door access.

It allows residents to see and communicate with visitors at the gate before granting access. This technology enhances security by providing visual verification and remote control of entry points. 
How it works:
  • Camera:
    A camera, often with features like night vision and high resolution, captures video of the gate area. 
  • Communication:
    The system typically includes a way for residents to communicate with visitors, often through two-way audio. 
  • Remote Control:
    Residents can remotely unlock the gate or door through a mobile app or other interface. 
  • Integration:
    Some systems integrate with other smart home or property management systems. 
Key Features:
  • Remote Access: View and control the gate from anywhere with an internet connection. 
  • Visual Verification: See who is at the gate before granting access. 
  • Two-way Audio: Communicate with visitors. 
  • Security Alerts: Receive notifications for motion or other events. 
  • Integration Options: Some systems can integrate with other smart home or access control systems.
Add to wishlist
Add to cart
Quick view
Exit Button SQTPB801
Compare

Exit Button SQTPB801

$22.85

Ship or pick up from our office.

Exit Button SQTPB801

*Touch *Backlight *DC 12V *COM-NC-NO
An Exit push button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms. 
Here's a more detailed explanation:
  • Function:
    An exit push button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit. 
  • Purpose:
    They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available. 
  • Types:
    Exit push buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them. 
  • Importance:
    These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals. 
  • Applications:
    Exit push buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities. 
Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Hot
Swing gate opener -VDS Articulated
Compare

Dual Swing Gate Opener -VDS Articulated

,
$1,442.80

Ship or pick up from our office.

Product Sheet PDF

Dual Swing Gate Opener -VDS Articulated

*Suitable gate weight: Maximum 800 Kg (Per leaf) Included: *2 x Electromechanical articulated arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Safety sensor *2 x Manual release key
A swing gate opener is a device that automates the opening and closing of a swing gate, typically using a motor and a control system.
It provides a convenient and secure way to control access to a property, whether residential, commercial, or industrial. These openers can be used with various gate types, including those that swing inward or outward. 
AC DIY Double Swing Gate Automation kit (GTR058) - Richmond ...
Here's a more detailed explanation:
How it works:
  • Motor:
    A motor, powered by electricity (AC or DC), provides the force to move the gate. 
  • Control System:
    A control board receives signals from a remote control, keypad, or other access control system and activates the motor accordingly. 
  • Opening Mechanism:
    Depending on the type of swing gate opener, the mechanism can be a linear arm, an articulated arm, or an underground system. 
  • Safety Features:
    Many swing gate openers include safety features like obstruction detection, which stops the gate if it encounters an obstacle during opening or closing. 
  • Emergency Release:
    An emergency release mechanism allows manual operation of the gate in case of power failure. 
Types of Swing Gate Openers:
  • Linear Arm: These are the most common type, using a linear actuator to push or pull the gate. 
  • Articulated Arm: These use a hinged arm to move the gate, reducing strain on the hinges. 
  • Underground: The motor and mechanism are installed underground, providing a more discreet appearance. 
  • Dual Swing: These openers are designed for gates that swing open from the center. 
Benefits of using a swing gate opener:
  • Convenience: Automatic opening and closing of the gate with the press of a button or remote control.
  • Security: Prevents unauthorized access to the property.
  • Enhanced Property Value: Adds a layer of sophistication and security to the property.
  • Accessibility: Can be particularly useful for people with mobility issues. 
Add to wishlist
Add to cart
Quick view
Sold outHot
Compare

Dual swing gate opener -Royalgate RGSW700

,
$739.30

Ship or pick up from our office.

Add to wishlist
Read more
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view