Pedestrian gate manual lock (Two-sided key)
Click to enlarge
Sliding gate opener
Sliding gate opener – Royalgate RGSL1.5TN $581.10
Back to products
Door Strike Lock
Door Strike Lock $69.95

Pedestrian gate manual lock (Two-sided key)

$83.80

Ship or pick up from our office.

Pedestrian gate manual lock (Two-sided key)

A “pedestrian gate manual lock (two-sided key)” refers to a type of gate latch or lock that can be operated and secured with a key from both sides of the gate.

Here’s a breakdown of what that means and why it’s useful:

  • Manual Lock: This indicates that the lock is operated by hand, typically by turning a key or a knob/lever, rather than being electric or automated.
  • Two-Sided Key (or Keyed on Both Sides): This is the key feature. It means that there is a key cylinder on both the exterior and interior sides of the gate. This allows you to:
    • Lock the gate from either the inside or the outside using a key.
    • Unlock the gate from either the inside or the outside using a key.

Why is this beneficial for a pedestrian gate?

  • Convenience: You don’t have to walk around the gate to unlock it if you’re on the “wrong” side.
  • Security: It provides a consistent level of security from both directions, preventing unauthorized access whether someone is trying to get in from the outside or out from the inside (if that’s a concern).
  • Accessibility: It can be crucial for pedestrian gates that serve as primary entry points, offering easy access for residents or authorized personnel from either side.

Types of locks that can be two-sided keyed for gates often include:

  • Deadbolt Hook Locks: These use a hook-shaped bolt that engages with a strike plate on the gate post.
  • Mortise Locks: These are installed within a pocket cut into the gate frame, offering a clean, flush appearance and good security.
  • Rim Locks: These are surface-mounted on the gate, making them easier to install.
  • Latches with an external access kit: Some general-purpose gate latches can be converted to be two-sided key-lockable with an additional kit.

When choosing such a lock, important considerations include the gate material (wood, vinyl, metal), weather resistance, ease of installation, and the level of security required.

Compare
Add to wishlist
Category: Tags: , , ,
Description

Pedestrian gate manual lock (Two-sided key)

A pedestrian gate manual lock is a locking mechanism for pedestrian gates that is operated by hand using a key or combination, rather than relying on electricity or automation. It provides a simple and reliable way to secure a gate that is opened and closed manually. 

Key Features and Functions:
  • Manual Operation:

    Unlike electric or automatic locks, a manual lock requires a user to physically turn a key or enter a combination to open or close the gate. 

  • Security:

    Manual locks provide a secure way to restrict access to a property or area, preventing unwanted entry. 

  • Power Independence:

    Because they don’t rely on electricity, manual locks are unaffected by power outages or system malfunctions. 

  • Durability:

    Often made of sturdy materials, manual locks are known for their durability and resistance to tampering. 

  • Examples:

    These locks can be found on various types of pedestrian gates, including those for swimming pools, playgrounds, and other access points. 

  • Integration with Automated Systems:

    When used with automated gates, manual locks may need to be manually unlocked before the automatic opener can function. 

  • Keyed or Combination Access:

    Manual locks can be operated with a physical key or a combination, offering different levels of security and convenience. 

  • Common Use Cases:

    They are ideal for securing gates where manual operation is sufficient and where power reliability is a concern. 

  • Variety of Designs:

    Manual locks come in various designs and styles to suit different gate types and security needs. 

  • Cost-effective:
    Generally, manual locks are more budget-friendly than automated or electric locking systems. 
Additional information
Weight 0.8 kg
Dimensions 18 × 9 × 9 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Pedestrian gate manual lock (Two-sided key)”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Pedestrian Gate Hinges
Compare

Pedestrian Gate Hinges

$13.35

Ship or pick up from our office.

Pedestrian Gate Hinges

Pedestrian gate hinges are designed to allow a gate intended for pedestrian use to swing open and closed, connecting the gate to its post or frame.
These hinges are crucial for the smooth operation and secure closure of the gate, ensuring proper alignment and functionality. They can be surface-mounted, bolt-on, or weld-on, and may include features like spring-assist or adjustable tension for self-closing. 
Here's a more detailed breakdown:
  • Function:
    Pedestrian gate hinges primarily serve to join the gate to its supporting structure (post or frame) and allow for rotation. 
  • Types:
    They can be surface-mounted, bolt-on, or weld-on, offering different installation methods. 
  • Features:
    Some hinges incorporate self-closing mechanisms, like spring-assist or adjustable tension, which can be important for safety or convenience. 
  • Materials:
    They are commonly made from steel, stainless steel, or polymer, ensuring durability and resistance to the elements. 
  • Applications:
    Pedestrian gate hinges are suitable for various settings, including residential, HOA, and commercial properties, especially for side gates, walkways, and restricted access enclosures. 
  • Considerations:
    When choosing hinges, factors like the gate's weight, size, and desired functionality (e.g., self-closing) should be taken into account. 
Add to wishlist
Add to cart
Quick view
Gate adjustable hinges
Compare

Gate adjustable hinges

$17.35

Ship or pick up from our office.

Gate adjustable hinges

*Steel material *Heavy-duty hinge *5-1/2” Length (Total 7-1/2”) x 4-1/2” Width *Bolt thickness: 3⁄4” Gate adjustable hinges are a type of hinge designed to allow for precise adjustments to a gate's position and alignment even after it has been installed. Unlike traditional fixed hinges, which offer little to no post-installation flexibility, adjustable hinges provide the ability to fine-tune the gate's fit. This feature is particularly beneficial for gates that may sag over time due to their weight, ground settling, or weather changes.   Why are Adjustable Hinges Important? Adjustable hinges solve common problems associated with gate installation and long-term use. Without them, realigning a sagging or misaligned gate often requires removing the gate, cutting, re-welding, and repainting the hinges, which is a time-consuming and labor-intensive process. With adjustable hinges, these adjustments can typically be made with simple tools like an Allen key or an adjustable wrench.   Key Features and Adjustments Adjustable hinges offer various levels of adjustment, which can include:
  • In/Out Adjustment: This is the most common adjustment, allowing the gate to be moved closer to or further away from the post. This helps eliminate gaps or prevent the gate from rubbing against the frame.
  • Up/Down Adjustment: This allows for vertical alignment, which is crucial for ensuring the gate clears the ground and for aligning the gate's lock with its strike plate, especially for double swing gates.
  • Left/Right Adjustment: Some advanced models offer lateral adjustment, providing ultimate flexibility in positioning the gate along its width. This can also help in adjusting the gate's tilt.
Many models also feature locking mechanisms, such as serrated washers or set screws, to ensure that once the adjustment is made, the gate remains securely in place.   Types of Adjustable Hinges Adjustable hinges come in various forms, often incorporating the adjustability into existing hinge designs:
  • Adjustable Eye Bolts: These are threaded components that allow vertical and horizontal adjustment, typically used with hook-on plates or gate pins.
  • Adjustable Band and Gudgeon Hinges: Similar to traditional band and gudgeon hinges, but with a threaded bolt and nuts for adjustment.
  • Weld-on Adjustable Hinges: Designed to be welded directly to metal gates and posts, offering strong support and adjustability.
  • Bolt-on Adjustable Hinges: These are bolted to the gate and post, making them suitable for various gate materials.
  • Barrel Hinges (Adjustable): Often featuring a set screw for up/down adjustments, suitable for heavier loads and offering a robust design.
  • Adjustable Self-Closing Hinges: Some adjustable hinges also incorporate a self-closing mechanism, which is ideal for security gates or areas where the gate needs to close automatically.
Advantages of Using Adjustable Hinges
  • Ease of Installation and Adjustment: They simplify the initial installation process by allowing for fine-tuning without needing to perfectly align everything from the start. Subsequent adjustments due to settling or wear are also quick and easy.
  • Longevity: By maintaining proper alignment, adjustable hinges reduce wear and tear on both the gate and the hinges themselves, extending their lifespan.
  • Enhanced Security: Proper alignment minimizes gaps around the gate, making it harder for unauthorized entry.
  • Versatility: They are available in various sizes and load capacities, suitable for everything from lightweight garden gates to heavy-duty industrial gates.
  • Reduced Maintenance Costs: The ability to easily adjust the gate's position can significantly reduce the need for costly repairs or re-installations.
  • Improved Aesthetics: Ensures the gate maintains a straight and professional appearance, avoiding unsightly sagging or misalignment.
  Materials and Finishes Adjustable hinges are manufactured from durable materials to withstand outdoor conditions and heavy use. Common materials include:
  • Steel: Strong and ideal for heavy-duty gates, often galvanized or treated to prevent rust.
  • Stainless Steel: Offers excellent corrosion resistance, making it perfect for outdoor and high-moisture environments.
  • Zinc-plated Steel: Provides a good balance of durability, cost-effectiveness, and rust protection.
  • Brass: Less strong than steel but used for decorative purposes due to its aesthetic appeal.
Finishes often include black powder-coating for a sleek look and added protection, or galvanization for superior corrosion resistance, especially in industrial or harsh weather conditions.
Add to wishlist
Add to cart
Quick view

Related products

Sliding gate V-Groove wheels - SLGWSS400
Compare

Sliding gate V-Groove wheels – SLGWSS400

$13.95

Ship or pick up from our office.

Sliding gate V-Groove wheels - SLGWSS400

*Heavy-duty *Steel material *Single bearing *Max 400 Kg *98 mm Diameter x 32 mm Width *Heavy-duty bolts, nuts, and washers are included
Sliding gate V-groove wheels are designed to roll along a V-shaped track, providing a guided and stable rolling surface for sliding gates.
These wheels are crucial for the smooth operation of sliding gates, especially those made of metal or used in industrial settings. The V-groove design minimizes friction, reduces noise and vibration, and ensures the gate remains aligned with its track. 
Here's a more detailed explanation:
  • Function:
    V-groove wheels are specifically designed to roll along a V-shaped track, which can be made of angle iron or other suitable materials. This design provides guidance and support for the gate, preventing it from deviating from its intended path. 
  • Benefits:
    The V-groove design offers several advantages:
    • Reduced Friction: The angled surface of the groove allows the wheel to roll smoothly, minimizing friction and making it easier to open and close the gate. 
    • Noise Reduction: The smooth rolling action reduces noise and vibration compared to other wheel designs. 
    • Stability: The V-groove ensures the gate remains aligned with the track, preventing it from wobbling or derailing. 
    • Load Capacity: V-groove wheels are often designed with heavy-duty construction to handle substantial weight, making them suitable for various gate sizes and materials. 
  • Materials:
    V-groove wheels are available in different materials, including:
    • Nylon: Offers good wear resistance, low friction, and resistance to various environmental conditions. 
    • Steel: Provides strength and durability, suitable for heavy-duty applications. 
    • Cast Iron: Another durable option, often used for industrial applications. 
  • Applications:
    V-groove wheels are used in a wide range of sliding gate applications, including:
    • Residential Gates: For driveways and other entryways. 
    • Commercial Gates: In businesses and industrial settings. 
    • Industrial Doors: In factories and warehouses.
Add to wishlist
Add to cart
Quick view
Gate Rubber Stopper A1
Compare

Gate Rubber Stopper A1

$39.95

Ship or pick up from our office.

Gate Rubber Stopper A1

Types of Rubber Stoppers:
  • Fixed rubber stoppers: Permanently installed, often used for heavier gates.
  • Adjustable rubber stoppers: Allow for customization of the gate's swing position.
  • Spring-loaded rubber stoppers: Combine a spring mechanism with the rubber for enhanced shock absorption and noise reduction.
  • Floor-mounted rubber stoppers: Attached to the floor to stop the gate's movement. 
Where they are used:
  • Swing gates:
    Commonly used to prevent swing gates from hitting walls, posts, or other structures. 
  • Sliding gates:
    Used to stop the gate at the end of its track, preventing it from rolling off. 
  • Industrial gates:
    Used in various industrial settings for gates that experience frequent and forceful use. 
  • Residential gates:
    Used in homes to protect gates, walls, and prevent accidents. 
Add to wishlist
Add to cart
Quick view
Gate drop ground latch
Compare

Gate drop ground latch

$61.70

Ship or pick up from our office.

Gate drop ground latch

A gate drop ground latch, also known as a cane bolt or drop rod, is a mechanism used to secure a gate in the open or closed position by inserting a rod into the ground.
It's typically used for double gates to keep one side stationary while the other is latched. It helps prevent gates from moving in the wind and adds extra security. 
Here's a more detailed explanation:
How it works:
  • A metal rod (the drop rod or cane bolt) is attached to the gate and slides through brackets or guides. 
  • When the gate is in the desired position (open or closed), the rod is lowered into a hole or receiver in the ground, securing the gate. 
  • To open the gate, the rod is lifted out of the ground and turned out of the way. 
Key features and benefits:
  • Secures gates: Prevents gates from swinging open or closed due to wind or other factors. 
  • Versatile: Can be used on various gate types, including wood, metal, and vinyl. 
  • Double gate support: Especially useful for securing one side of a double gate while the other is latched. 
  • Added security: Can be used in conjunction with other latches for increased security. 
  • Easy installation: Generally involves mounting brackets and drilling a hole for the rod. 
  • Durable: Made of materials like steel, often with a powder coat finish for weather resistance. 
Add to wishlist
Add to cart
Quick view
Sliding gate operator gear rack -SLGR2
Compare

Sliding gate operator gear rack -SLGR2

$9.55

Ship or pick up from our office.

Sliding gate operator gear rack -SLGR2

The Sliding Gate Operator Gear Rack SLGR2 is a specific type of toothed bar used in conjunction with a sliding gate operator (motor) to convert its rotational power into the linear motion needed to open and close a sliding gate. Let's break down what SLGR2 likely refers to and its characteristics: Function of a Gear Rack:
  • Linear Motion: The Sliding Gate Operator Gear Rack SLGR2 is essentially a straight "rack" of teeth that meshes with a small circular gear called a pinion, which is attached to the shaft of the sliding gate operator's motor.
  • Power Transmission: As the pinion spins, its teeth engage with the teeth of the gear rack, pushing or pulling the gate horizontally along its track. This is how the motor physically moves the gate.
Key Features of the SLGR2 Gear Rack: Based on the search results, particularly from Royal Gate (which operates in Surrey, BC):
  • Length: The Sliding Gate Operator Gear Rack SLGR2 is specified as being 340 mm (millimetres) in length. This is a relatively short segment. Sliding gates often require multiple sections of gear rack to be joined together to span the entire length of the gate, as most gates are much longer than 340mm.
  • Mounting Holes: It has "2 Holes". These holes are pre-drilled for easy attachment to the bottom frame of the sliding gate using screws or bolts.
  • Material: While the exact material for this specific SLGR2 is not explicitly stated in all listings, gear racks are commonly made from:
    • Steel (most common): Offers high strength, durability, and resistance to wear, making it suitable for heavy gates and high-traffic applications. Often galvanized or treated for corrosion resistance.
    • Nylon with a Steel Core: A popular alternative. The nylon exterior provides quieter operation and good corrosion resistance, while the internal steel core offers the necessary strength and stability for the gate's weight and movement. This is a good balance of properties.
    • Less commonly, other plastics or stainless steel are used for specific applications.
  • "Module": While not explicitly stated for SLGR2, gear racks (and their mating pinions) adhere to a "module" standard (e.g., Module 2, Module 4). The module defines the size of the teeth and the spacing between them, ensuring that the gear rack properly meshes with the pinion gear of the specific sliding gate operator it's intended for. The SLGR2 would have a specific module that matches the operators sold by Royal Gate.
Where you'd use it: The Sliding Gate Operator Gear Rack SLGR2 is used in conjunction with gear rack sliding gate operators. These are the most common type of automatic opener for sliding gates, where the gate itself has wheels that run on a ground track (as opposed to cantilever gates). In the context of Vancouver, BC: If you are looking for parts for a sliding gate operator system in Canada, Royal Gate is a local supplier that specifically lists the SLGR2 gear rack. This means it's a standard replacement part or component they offer for their range of sliding gate operators. When purchasing, it's crucial to ensure the SLGR2 (or any gear rack) is compatible with the "module" of your existing gate operator's pinion gear for proper meshing and operation.
Add to wishlist
Add to cart
Quick view
Sliding gate operator gear rack -SLGR41
Compare

Sliding gate operator gear rack -SLGR41

$14.45

Ship or pick up from our office.

Sliding gate operator gear rack -SLGR41

*4 Holes *Length: 1018 mm The SLGR41 is a gear rack specifically designed for sliding gate operators. It's a crucial component that works in conjunction with the gate motor's pinion gear to move the gate open and closed. Here's a breakdown of its characteristics:
  • Function: It provides the linear motion for a sliding gate when engaged with the rotating pinion of a gate motor.
  • Material: It's typically made of steel, often bright steel, for durability and strength. Some variations might also be nylon-covered steel or even full nylon for quieter operation, though steel is common for its robustness.
  • Dimensions: The SLGR41 typically comes in 1-meter (1000mm) or 1018mm lengths. It often has 4 holes for mounting to the gate frame. Common dimensions for such racks are around 12mm thickness and 30mm face width, although these can vary slightly.
  • Application: It's used in both residential and commercial sliding gate automation systems.
  • Features: It usually includes fixing points or lugs for secure attachment to the gate. These sections are designed to interlock or slide into each other to create the required length for the gate.
Add to wishlist
Add to cart
Quick view
Manual release key – Swing/Sliding gate openers
Compare

Manual release key – Swing/Sliding gate openers

$37.55

Ship or pick up from our office.

Manual release key – Swing/Sliding gate openers

A swing or sliding gate opener release key is a tool that allows you to manually operate a swing gate when the automatic opener is not functioning, such as during a power outage. It disengages the automatic mechanism, enabling the gate to be opened or closed manually. 
Here's a more detailed explanation:
  • Purpose:
    The key is used to unlock the gate opener's motor, allowing it to be moved by hand. 
  • Location:
    The release mechanism is often found near the gate motor, either on the motor itself or in a nearby housing. 
  • Functionality:
    The key may turn a dial or lever that releases the motor's gears, enabling manual operation. 
  • Importance:
    This manual release mechanism is essential for emergency access and situations where the automatic system is unavailable. 
Add to wishlist
Add to cart
Quick view
Key selector
Compare

Key selector

$84.45

Ship or pick up from our office.

Key selector

A gate opener key selector is a device that allows you to manually open and close an automatic gate using a physical key, providing an alternative access method in case of power outages or remote control malfunctions.  It essentially disengages the automated system, allowing for manual operation of the gate.  A gate opener key selector is a device used to control the operation of an automated gate (or door, garage door, barrier, etc.) using a physical key. It's essentially a key-operated switch that allows authorized users to open, close, or set the operating mode of the gate.
Here's a breakdown of its function and characteristics:
  • Purpose: The primary purpose of a key selector is to provide a secure and convenient way to operate an automatic gate, especially in situations where remote controls, keypads, or other access methods might not be practical or desired (e.g., for maintenance personnel, or as a backup).
  • Mechanism: It typically consists of a sturdy, often metal, housing that is mounted on a wall, column, or recessed into a wall. Inside, there's a key cylinder that, when turned, activates a microswitch or set of contacts. These contacts then send a signal to the gate opener's control unit, telling it to perform a specific action (open, close, or a specific operating mode).
  • Security: Key selectors are designed to be robust and weather-resistant, often with vandal-proof features. The use of a physical key adds a layer of security, as only individuals with the correct key can operate the gate.
  • Types and Features:
    • Key-operated switches: The most common type, where inserting and turning a key triggers the gate's action.
    • Universal or European cylinder locks: Different types of key cylinders can be used for varying levels of security and compatibility.
    • Single or multiple microswitches: Some selectors have one switch for a simple open/close function, while others have multiple switches to allow for more complex operations (e.g., partial opening, full opening, lock, exit only, automatic mode).
    • Wall-mounted or flush-mounted: They can be installed on the surface of a wall or column, or recessed for a more discreet look.
    • Material: Often made from durable materials like aluminum or die-cast metal to withstand outdoor conditions and potential impact.
  • Integration: Key selectors are accessories that integrate with the overall automated gate system, complementing other access control methods like remote controls, keypads, transponder readers, or even smartphone apps.
In essence, a gate opener key selector provides a reliable, key-based method for controlling an automated gate, ensuring secure and flexible access.
Add to wishlist
Add to cart
Quick view
Pedestrian gate manual lock (One side key)
Compare

Pedestrian gate manual lock (One side key)

$55.75

Ship or pick up from our office.

Pedestrian gate manual lock (One side key)

A "pedestrian gate manual lock (one side key)" refers to a type of locking mechanism for a gate that is operated manually and requires a key to unlock it from one side, while the other side allows for easy exit without a key. Here's a breakdown of its key features:
  • Manual Operation: This lock doesn't rely on electricity or automation. You physically use your hand to engage or disengage the locking mechanism.
  • One-Sided Key Access: The defining characteristic is that a physical key is needed to unlock the gate from one specific side (usually the exterior or entry side).
  • Easy Exit (Thumb-Turn, Latch, or Push Pad): On the interior or exit side, there's typically a simple mechanism like a thumb-turn, lever, push pad, or a basic latch that allows for quick and easy opening without needing a key. This is often a safety feature, especially for emergency exits.
  • Security: It provides a basic level of security, preventing unauthorized entry from the keyed side.
  • Power Independence: Since it's manual, it's not affected by power outages.
  • Common Use Cases: These locks are frequently found on garden gates, backyard gates, pool gates, and other pedestrian access points where controlled entry is desired but a quick exit is also necessary.
In essence, it's a practical and straightforward locking solution for gates where you want to control who comes in, but allow anyone inside to easily get out.
Add to wishlist
Add to cart
Quick view