Gate Opener Remote Control
Copy_code_universal
Click to enlarge
Gate Opener Remote Control
Copy_code_universal
Radio receiver
Radio receiver RG315-24V1C $33.45
Back to products
Power converter - AC 24 V to DC 12 V
Power converters - AC 24 V to DC 15 V $34.00

Gate Opener Remote Control

$28.35

Ship or pick up from our office.

Gate Opener Remote Control

– Copy Code type

Gate opener remote controls use two main code types for copying: fixed code and rolling code.

Fixed code remotes are simpler and easier to clone, while rolling code remotes offer enhanced security and require more advanced techniques for copying. 

Gate Opener Remote Control Fixed Code type:
  • How it works: A fixed code remote transmits the same code every time it’s pressed. 
  • Cloning: These are generally easier to clone using a universal remote duplicator. 
  • Security: Less secure than rolling code, as the code can be intercepted and copied. 
  • Example: Commonly found in older or simpler gate opener systems. 
Compare
Add to wishlist
Category: Tags: , , , , ,
Description

Gate Opener Remote Control

Example: Commonly found in older or simpler gate opener systems. 

Gate Opener Remote Control Rolling Code type:
  • How it works:

    A rolling code remote changes its code each time it’s used, making it much more difficult to copy. 

  • Cloning:
    Requires specialized equipment and techniques, like pairing with the receiver. 

    COMPATIBILITY LIST:

    BFT, CARDIN, BENINCA, CAME, DEA, DITEC, DOORMATIC,
    DOORHAN, DUCATI, ERRECA, FAAC, FADINI, GENIE, GENIUS, GIBIDI, HORMAN, KEY
    AUTOMATION, KING GATES, LIFE, LINEAR, MHOUSE, MOOVO, NICE, PROTECO, RIB,
    SEA, V2, SOMFY, SOMMER, TAU, TELCOMA, VDS, KING GATES, and more…

  • Security:

    Highly secure, as each code is unique and only valid for a single use. 

  • Example:

    Used in most modern gate and garage door opener systems for increased security. 

Cloning Techniques:
  • Fixed Code:

    The process usually involves pressing and holding buttons on both the original and the cloning remote simultaneously until the cloning remote receives the signal and copies the code. 

  • Rolling Code:

    Cloning rolling code remotes is more complex, often requiring access to the receiver unit and following specific programming procedures outlined by the manufacturer. 

  • Universal Remote:

    Universal remotes can sometimes be programmed to copy fixed codes, but may not be compatible with all rolling code systems. 

Important Considerations:
  • Always refer to the specific instructions for your gate opener and remote control model.
  • If cloning a rolling code remote, ensure compatibility with your system and follow the manufacturer’s instructions carefully. 
  • If you are unsure about the cloning process, consult a professional gate technician. 
Additional information
Weight 0.08 kg
Dimensions 8 × 5 × 3 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Gate Opener Remote Control”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view
Radio receiver RGRR2C
Compare

Radio receiver RGRR2C

$55.15

Ship or pick up from our office.

Radio receiver RGRR2C

*AC/DC 12-24 V *2-CH *433 MHz *Rolling code
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Radio receiver RG315-12V2C

$36.15

Ship or pick up from our office.

Radio receiver RG315-12V2C

*DC 12 V *2-CH *315 MHz * Compatible with Homelink system
Add to wishlist
Add to cart
Quick view
Radio receiver RQ1M433 – IT1
Compare

Radio receiver RQ1M433 – IT1

$119.25

Ship or pick up from our office.

Radio receiver RQ1M433 – IT1

(Compatible with the wireless keypad control KW402 & KW125) *Made in Italy *AC/DC 12-24 V *1-CH *433.92 MHz *Capacity: 30 remotes
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Radio receiver RG315-24V1C

$33.45

Ship or pick up from our office.

Radio receiver RG315-24V1C

*DC 24 V *1 Channel *315 MHz * Compatible with the Homelink system A gate opener radio receiver is an electronic device that acts as the "ear" for an automatic gate system. Its primary function is to receive radio signals from a remote control (transmitter) and, upon recognizing a valid signal, instruct the gate opener's control board to activate the gate motor to open or close the gate. How it Works Here's a breakdown of how a gate opener radio receiver typically operates:
  • Signal Reception: When you press a button on your remote control, it sends out a radio signal at a specific frequency (e.g., 300MHz, 310MHz, 318MHz, 433MHz).
  • Compatibility: The receiver is tuned to the same frequency as the remote control. For the system to work, the receiver and remote must also be compatible in terms of brand and radio protocol (e.g., rolling code, fixed code).
  • Decoding: The receiver decodes the radio signal it receives. Modern systems often use "rolling code" technology for enhanced security, where the code changes with each use, making it very difficult for unauthorized individuals to duplicate or intercept.
  • Command Relay: Once the signal is decoded and validated, the receiver relays the command to the gate opener's main control board.
  • Gate Activation: The control board then triggers the gate motor, causing the gate to open or close.
  Types and Features Gate opener radio receivers come in various forms and with different features:
  • Internal vs. External: Some gate openers have built-in receivers, while others utilize external receivers that connect to the system. External receivers can be used as replacements if an internal one fails or to add functionality.
  • Channels: Receivers can be single-channel (controlling one gate) or multi-channel (controlling multiple gates or other devices).
  • Frequency: Receivers operate on specific radio frequencies, and it's crucial that the remote control matches the receiver's frequency.
  • Security: Newer receivers often incorporate advanced security features like rolling codes or encrypted protocols to prevent unauthorized access.
  • Range: The effective range of a receiver varies, typically from 50 to 100 feet, but some long-range receivers can extend this distance.
  • Power Input: Receivers can operate on various voltages, such as 12V DC, 24V DC, or even 110V AC, depending on the gate opener system.
  • Compatibility: While some receivers are universal, many are designed to work with specific brands or types of remote controls.
  Importance The radio receiver is a vital component of any automated gate system, providing:
  • Convenience: It allows users to open and close gates remotely, eliminating the need to manually operate them.
  • Security: With coded and encrypted signals, it ensures that only authorized individuals can access the property.
  • Flexibility: Many receivers can be programmed to work with multiple remote controls, accommodating various users.
Add to wishlist
Add to cart
Quick view
Radio receiver RG315-24V2C
Compare

Radio receiver RG315-24V2C

$36.15

Ship or pick up from our office.

Radio receiver RG315-24V2C

*DC 24 V *2 Channels *315 MHz * Compatible with Homelink systems
Add to wishlist
Add to cart
Quick view
Radio receiver RQ2C433A - IT2
Compare

Radio receiver RECT102-V2.0 – CH2

$53.50

Ship or pick up from our office.

Radio receiver RECT102-V2.0 - CH2

(Compatible with the wireless keypad control KW402 & KW125) *AC/DC 12-24 V *2-CH *433.92 MHz *Capacity: 2000 remotes
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Radio remote control receiver

$61.95

Ship or pick up from our office.

Radio remote control receiver

One remote control is included (Compatible with Home-Link system) *DC 12-24 V *2 Channels *315 MHz
A radio remote control receiver is an electronic device that receives signals from a remote control and triggers the gate's motor to open or close.
It acts as the "ear" for the gate opener, interpreting the radio signals sent by the remote. These receivers are crucial for the functionality and convenience of automated gate systems. 
Here's a more detailed explanation:
Function: 
  • The receiver is designed to detect the specific radio frequency and code transmitted by the gate remote.
  • Upon receiving the correct signal, it activates the gate's motor, causing the gate to move.
Add to wishlist
Add to cart
Quick view
Radio receiver R5130
Compare

Radio receiver R5130

$56.75

Ship or pick up from our office.

Radio receiver R5130

(Compatible with the wireless keypad control KW125) *AC/DC 12-24 V *2 Channels *433.92 MHz
Add to wishlist
Add to cart
Quick view
Radio receiver RGRR1C
Compare

Radio receiver RGRR1C

$51.90

Ship or pick up from our office.

Radio receiver RGRR1C

*AC/DC 12-24 V *1-CH *433 MHz *Rolling code
Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view

Related products

Smart Video Doorbell
Compare

Smart Video Doorbell

$169.35

Ship or pick up from our office.

Smart Video Doorbell

*WiFi connection *Android/IOS app on the smartphone *Answer visitors using smartphone worldwide
Add to wishlist
Add to cart
Quick view
Smartphone Gate Controller
Compare

Smartphone Gate Controller

$76.80

Ship or pick up from our office.

Smartphone Gate Controller

A Smartphone gate controller module primarily connects to your existing gate opener by essentially "mimicking" the action of a traditional wired push button or a remote control. Here's a breakdown of the common connection methods:
1. Wired Connection to the Gate Opener's Control Board (Most Common):
  • "Dry Contact" or "Push Button" Terminals: Most gate opener control boards have terminals designed for a wired wall control panel or push button. These are often labeled as "COM" (Common), "PUSH," "START," "CYCLE," or similar.
  • Relay Connection: The Wi-Fi gate controller module typically contains a relay. When you send a command from your smartphone app, the module activates this relay. The relay then momentarily closes a circuit between the designated terminals on your gate opener's control board. This "short circuit" or "dry contact" action is interpreted by the gate opener as a signal to open or close, just as if you had pressed a physical button.
  • Power Supply: The Wi-Fi module itself needs power. It can often be powered directly from the gate opener's control board (if it provides a suitable low-voltage output, e.g., 7-32V), or it might require a separate power adapter (like a 5V USB power supply).
2. "Hacking" an Existing Remote Control (DIY Approach):
  • Some DIY solutions involve wiring the Wi-Fi module to the internal contacts of an existing gate remote control.
  • The module then "presses" the button on the remote control electronically, sending the same signal the remote would normally send to the gate opener. This is less common for commercial products and more of a hobbyist project.
    Key Components and How They Work Together:
  • Wi-Fi Connection: The module connects to your home's Wi-Fi network (2.4 GHz). This allows your smartphone (via the internet) to communicate with the module.
  • Control Board (within the module): This is the "brain" of the module, receiving commands from your smartphone and translating them into signals for the gate opener.
  • Relay: The electromechanical switch that closes the circuit on the gate opener's control board.
  • Input Terminals (optional): Some modules may have inputs for sensors (e.g., magnetic sensors) that can tell you the gate's open/closed status, which is then communicated back to your app.
    General Installation Steps:
  1. Locate the Gate Opener Control Board: This is usually found within the gate opener's housing.
  2. Identify the Control Terminals: Refer to your gate opener's manual to find the terminals for a push button or wall control.
  3. Wire the Module: Connect the output wires from the Wi-Fi module's relay to the appropriate control terminals on the gate opener's board.
  4. Power the Module: Connect the module to a suitable power source.
  5. Connect to Wi-Fi and App: Follow the manufacturer's instructions to connect the module to your Wi-Fi network and pair it with the smartphone app.
  6. Test: Test the functionality from your smartphone.
    Important Considerations:
  • Compatibility: Always check the compatibility of the Wi-Fi module with your specific gate opener brand and model. Some modules are universal, while others are designed for certain manufacturers.
  • Wiring Diagrams: Always consult the wiring diagrams provided by both your gate opener manufacturer and the Wi-Fi module manufacturer.
  • Safety: If you're not comfortable with electrical wiring, it's best to consult a professional electrician or gate technician.
  • Wi-Fi Signal Strength: Ensure a strong 2.4 GHz Wi-Fi signal at the location of the gate opener for reliable operation. You may need a Wi-Fi extender if the gate is far from your router.
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS EGO110
Compare

Double swing gate opener –VDS EGO110

,
$1,181.30

Ship or pick up from our office.

Product Sheet PDF

Double swing gate opener –VDS EGO110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Safety sensor *2 x Manual release key The VDS EGO110 is a type of double swing gate opener manufactured by VDS Automation. Here's a breakdown of its key characteristics:
  • Type: It's an electromechanical operator designed for swing gates, meaning it uses an electric motor to open and close the gate leaves. It often utilizes a linear screw or ram type mechanism, pushing and pulling a piston or rotating a threaded shaft to move the gate.
  • Application: It's specifically for double swing gates, which are gates with two leaves that open and close from the center.
  • Construction: It features a sturdy aluminum structure and a stainless steel rod, designed for durability and resistance to corrosion, oxidation, and rust.
  • Gate Capacity: The VDS EGO110 is suitable for gates with a maximum leaf weight of 200 kg (approximately 440 lbs) and a maximum leaf length of 3 meters (approximately 9.8 feet) per leaf.
  • Operation:
    • It offers a 120° opening angle.
    • It can operate with either a 120V AC power supply. The 24V DC version is typically more intensive in its use frequency.
    • It has an anti-squashing system (EN 12453) and a slowing down function (EN 12453) for safety, stopping or reversing if an obstacle is detected.
    • It features quiet operation (less than 30 dBA noise level).
    • It includes a manual release with a key for operation during power outages.
    • Opening time is generally 20-25 seconds.
  • Installation: It's designed for quick installation with multi-position brackets.
  • Environmental Conditions: It's built to operate in temperatures ranging from -20°C to +55°C (-4°F to 131°F) and has an IP55 protection rating, indicating good resistance to dust and water.
  • Optional Features: Optional limit switches and a battery backup kit are available.
In essence, the double swing gate opener –VDS EGO110 is a robust and reliable choice for automating double swing gates, particularly for residential or light commercial applications where the gate size and weight are within its specified limits.
Add to wishlist
Add to cart
Quick view
Camera Gate controller
WiFi & Camera Gate/Door controller
Compare

Camera Gate Controller

$240.50

Ship or pick up from our office.

Camera Gate Controller

● Universal gate opener/garage door opener phone remote control and 1080P Full-HD outdoor surveillance camera, all-in-one!
  • By using the Camera Gate controller realtime monitor, open and close your door openers remotely using your smartphone from anywhere, any time!
● Features 1080p resolution full high definition CMOS sensor and infrared IR LED, the wireless camera is designed for ultra-sharp clear images and monitor in complete darkness. The 24/7 live video display on your smartphone with the FREE Linkcraft APP ensures your garage or gate is safe and secure. No worry about the status of the door. ● The Camera Gate Controller works with all Gate Openers, and is compatible with most gate openers/garage door openers with External Receiver which is sold separately.
  • Multi-users monitor and control, share your WIFI camera and gate remote access with family and friends. Up to 50 cameras can be added to our APP, and you can take pictures and record videos for your gate or garage on your phone. IP44 Weatherproof - This camera is perfect for outdoor use, and works well under rough weather like storms and snow.
  • Universal smartphone remote control for gate opener/garage door opener / various household appliances / industrial devices and 1080P Full-HD outdoor surveillance camera, all-in-one！
  • Real-time monitor and control your devices using your smartphone from anywhere, any time!
  • Typical applications include opening and closing your door openers, lights, automatic feeders, water pump, and spray system remotely.
  • Features 1080p resolution full high definition CMOS sensor and infrared IR LED, the wireless camera is designed for ultra-sharp clear images and monitors in complete darkness.
  • 24/7 live video display on your smartphone with the FREE Linkcraft APP greatly ensures safety and security.
  • No worry about the status of the door or the device.
  • The wire in the controller works with most gate openers/garage door openers / various electrical equipment.
  • Multi-users monitor and control, share your WIFI camera, and remote access with family and friends.
  • Up to 50 cameras can be added to our APP, and take pictures and record videos for your device on your phone.
  • IP44 Weatherproof - This camera is perfect for outdoor use, and works well under rough weather like storms and snow.
  • Features relay output whose max contact is up to 15A/120VAC & 10A/30VDC, two modes of toggle click and self-hold are selectable.
  • You can set a timer in self-hold mode to adjust the working time of the device.
  • Add up to 128GB micro SD card (optional, SD card NOT included), the video is to be recorded day and night.
  • Easy-to-follow manual is included for quick setting up.

A camera gate controller is a system, often part of an access control system, that combines a camera with the ability to control gate or door access.

It allows residents to see and communicate with visitors at the gate before granting access. This technology enhances security by providing visual verification and remote control of entry points. 
How it works:
  • Camera:
    A camera, often with features like night vision and high resolution, captures video of the gate area. 
  • Communication:
    The system typically includes a way for residents to communicate with visitors, often through two-way audio. 
  • Remote Control:
    Residents can remotely unlock the gate or door through a mobile app or other interface. 
  • Integration:
    Some systems integrate with other smart home or property management systems. 
Key Features:
  • Remote Access: View and control the gate from anywhere with an internet connection. 
  • Visual Verification: See who is at the gate before granting access. 
  • Two-way Audio: Communicate with visitors. 
  • Security Alerts: Receive notifications for motion or other events. 
  • Integration Options: Some systems can integrate with other smart home or access control systems.
Add to wishlist
Add to cart
Quick view
Wireless Keypad Access Control KW402
Compare

Wireless Keypad Access Control KW402

$89.95

Ship or pick up from our office.

Wireless Keypad Access Control KW402

*Wireless *Rain Shield Cover included *2 Channels *LED Back Light *433 MHz
The wireless keypad access control KW402 is the preferred secure activation device for the autoslide automatic door system. This security keypad will allow you to enter your home from the outside using a unique programmed code. Combined with the VDS and ZERO gate motor, you can have a secure and automated entryway into and out of your home or workplace. The wireless keypad access control KW402 is wireless and provides the benefit of not having to run cables through your exterior walls. It has two channels that will allow you to not only have a regular access code but also one you can change for guests to access your home. The wireless keypad access control KW402 is programmable for two separate codes up to eight digits long each. Audible beeps will alert you to an accepted code as well as an invalid code.
Specifications:
Duplicate Your Existing Remote Controllers so you always have a backup:
1.Vehicle central locking systems
2. Garage doors
3. Electronic gates
4. Electrical appliances/Home automation i.e. lights
5. Car sunroofs
6. Car/Motorbike alarms Easy to use, the 4 channel remote control system lets you take control of your gets, car, home and garage

Wireless Keypad Access Control KW402:

1,This is a dual channel transmitters that are activated only after having entered a Suitable combination.
2, The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.
3,The estimated transmission range is 200 m in open space and 35m indoors .
4, The units are designed to ensure battery life equivalent to an estimated 2 years of oper-ation considering 10 transmissions/day.

Specification Wireless Keypad Access Control KW402:

Power:6Volt DC 2PCS CR2032 Li battery Battery life:2 years (4 times operation every day)
Frequency:433.92MHz+/-75KHz
Transmitter power:1Mw
Data format:standard
Work temp:-20~+55 centidegree
Password number:0-8
Water proof level:1p54
Dimension:85*75*35mm
Weight:150g
Add to wishlist
Add to cart
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Manual release key *1 x Safety sensor
A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view
Swing gate opener -Zero ZSW400
Compare

Dual swing gate opener -Zero ZSW400

,
$1,237.15

Ship or pick up from our office.

Dual swing gate opener -Zero ZSW400

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view
Exit Wand Car Detector
Compare

Exit Wand Car Detector

$187.30

Ship or pick up from our office.

Exit Wand Car Detector

An Exit Wand Car Detector, also known as a magnetometer or vehicle sensor, works by sensing changes in the Earth's magnetic field caused by the movement of metal objects, specifically vehicles.
Here's a more detailed breakdown of how it operates:
  1. Magnetometer: The core of an exit wand is a magnetometer. This device is highly sensitive to variations in magnetic fields.
  2. Earth's Magnetic Field: The Earth naturally has a magnetic field surrounding it.
  3. Vehicle Movement: When a large mass of ferrous metal, like a car, truck, or even a heavy piece of metal equipment, moves through this magnetic field, it creates a disturbance or distortion in the field. Think of it like a boat creating waves as it moves through water.
  4. Detection: The exit wand's magnetometer picks up on these subtle "waves" or changes in the magnetic field as the vehicle passes by.
  5. Signal to Gate Opener: Once the changes are detected and exceed a certain threshold (which is often adjustable for sensitivity), the exit wand sends a signal to the gate opener's control board.
  6. Gate Activation: The gate opener, upon receiving this signal, then automatically opens the gate, allowing the vehicle to exit the property "hands-free" – without the need for a remote, keypad, or manual intervention.
Key Characteristics and Considerations:
  • Motion-Activated: A crucial point is that exit wands primarily detect moving metal. If a car is stopped directly over the wand, it may lose detection.
  • Buried Installation: Exit wands are typically buried underground, often alongside the driveway, making them discreet and protected from weather and accidental damage.
  • Sensitivity Adjustment: Most exit wands have an adjustable sensitivity. This allows you to fine-tune how easily it triggers, helping to prevent false alarms from smaller metal objects like bicycles or lawnmowers, or to ensure it detects vehicles at a desired range.
  • Wiring: Wired exit wands have a cable that connects the wand to the gate opener's control box. Wireless versions transmit the signal wirelessly to a receiver connected to the gate opener.
  • Not for Safety Loops: While they are excellent for automatic exit, exit wands are generally not recommended for use as safety loops. Safety loops (which are different, typically inductive loops buried in the driveway itself) are designed to detect any presence of metal, moving or stationary, to prevent the gate from closing on a vehicle.
  • Limitations: They can sometimes be triggered by very large or fast-moving metal objects even if they are not cars. Also, if they are placed too close to the gate, they might experience false triggers.
In essence, an exit wand provides a convenient and reliable way for vehicles to automatically exit a property controlled by an automatic gate, leveraging the principle of magnetic field detection.
Add to wishlist
Add to cart
Quick view