Gate Opener Remote Control
Copy_code_universal
Click to enlarge
Gate Opener Remote Control
Copy_code_universal
Radio receiver
Radio receiver RG315-24V1C $33.45
Back to products
Power converter - AC 24 V to DC 12 V
Power converters - AC 24 V to DC 15 V $34.00

Gate Opener Remote Control

$28.35

Ship or pick up from our office.

Gate Opener Remote Control

– Copy Code type

Gate opener remote controls use two main code types for copying: fixed code and rolling code.

Fixed code remotes are simpler and easier to clone, while rolling code remotes offer enhanced security and require more advanced techniques for copying. 

Gate Opener Remote Control Fixed Code type:
  • How it works: A fixed code remote transmits the same code every time it’s pressed. 
  • Cloning: These are generally easier to clone using a universal remote duplicator. 
  • Security: Less secure than rolling code, as the code can be intercepted and copied. 
  • Example: Commonly found in older or simpler gate opener systems. 
Compare
Add to wishlist
Category: Tags: , , , , ,
Description

Gate Opener Remote Control

Example: Commonly found in older or simpler gate opener systems. 

Gate Opener Remote Control Rolling Code type:
  • How it works:

    A rolling code remote changes its code each time it’s used, making it much more difficult to copy. 

  • Cloning:
    Requires specialized equipment and techniques, like pairing with the receiver. 

    COMPATIBILITY LIST:

    BFT, CARDIN, BENINCA, CAME, DEA, DITEC, DOORMATIC,
    DOORHAN, DUCATI, ERRECA, FAAC, FADINI, GENIE, GENIUS, GIBIDI, HORMAN, KEY
    AUTOMATION, KING GATES, LIFE, LINEAR, MHOUSE, MOOVO, NICE, PROTECO, RIB,
    SEA, V2, SOMFY, SOMMER, TAU, TELCOMA, VDS, KING GATES, and more…

  • Security:

    Highly secure, as each code is unique and only valid for a single use. 

  • Example:

    Used in most modern gate and garage door opener systems for increased security. 

Cloning Techniques:
  • Fixed Code:

    The process usually involves pressing and holding buttons on both the original and the cloning remote simultaneously until the cloning remote receives the signal and copies the code. 

  • Rolling Code:

    Cloning rolling code remotes is more complex, often requiring access to the receiver unit and following specific programming procedures outlined by the manufacturer. 

  • Universal Remote:

    Universal remotes can sometimes be programmed to copy fixed codes, but may not be compatible with all rolling code systems. 

Important Considerations:
  • Always refer to the specific instructions for your gate opener and remote control model.
  • If cloning a rolling code remote, ensure compatibility with your system and follow the manufacturer’s instructions carefully. 
  • If you are unsure about the cloning process, consult a professional gate technician. 
Additional information
Weight 0.08 kg
Dimensions 8 × 5 × 3 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Gate Opener Remote Control”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Radio receiver RGRR1C
Compare

Radio receiver RGRR1C

$51.90

Ship or pick up from our office.

Radio receiver RGRR1C

*AC/DC 12-24 V *1-CH *433 MHz *Rolling code
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Radio receiver RG315-12V2C

$36.15

Ship or pick up from our office.

Radio receiver RG315-12V2C

*DC 12 V *2-CH *315 MHz * Compatible with Homelink system
Add to wishlist
Add to cart
Quick view
Radio receiver R5130
Compare

Radio receiver R5130

$56.75

Ship or pick up from our office.

Radio receiver R5130

(Compatible with the wireless keypad control KW125) *AC/DC 12-24 V *2 Channels *433.92 MHz
Add to wishlist
Add to cart
Quick view
Radio receiver RG315-24V2C
Compare

Radio receiver RG315-24V2C

$36.15

Ship or pick up from our office.

Radio receiver RG315-24V2C

*DC 24 V *2 Channels *315 MHz * Compatible with Homelink systems
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Radio receiver RG315-24V1C

$33.45

Ship or pick up from our office.

Radio receiver RG315-24V1C

*DC 24 V *1 Channel *315 MHz * Compatible with the Homelink system A gate opener radio receiver is an electronic device that acts as the "ear" for an automatic gate system. Its primary function is to receive radio signals from a remote control (transmitter) and, upon recognizing a valid signal, instruct the gate opener's control board to activate the gate motor to open or close the gate. How it Works Here's a breakdown of how a gate opener radio receiver typically operates:
  • Signal Reception: When you press a button on your remote control, it sends out a radio signal at a specific frequency (e.g., 300MHz, 310MHz, 318MHz, 433MHz).
  • Compatibility: The receiver is tuned to the same frequency as the remote control. For the system to work, the receiver and remote must also be compatible in terms of brand and radio protocol (e.g., rolling code, fixed code).
  • Decoding: The receiver decodes the radio signal it receives. Modern systems often use "rolling code" technology for enhanced security, where the code changes with each use, making it very difficult for unauthorized individuals to duplicate or intercept.
  • Command Relay: Once the signal is decoded and validated, the receiver relays the command to the gate opener's main control board.
  • Gate Activation: The control board then triggers the gate motor, causing the gate to open or close.
  Types and Features Gate opener radio receivers come in various forms and with different features:
  • Internal vs. External: Some gate openers have built-in receivers, while others utilize external receivers that connect to the system. External receivers can be used as replacements if an internal one fails or to add functionality.
  • Channels: Receivers can be single-channel (controlling one gate) or multi-channel (controlling multiple gates or other devices).
  • Frequency: Receivers operate on specific radio frequencies, and it's crucial that the remote control matches the receiver's frequency.
  • Security: Newer receivers often incorporate advanced security features like rolling codes or encrypted protocols to prevent unauthorized access.
  • Range: The effective range of a receiver varies, typically from 50 to 100 feet, but some long-range receivers can extend this distance.
  • Power Input: Receivers can operate on various voltages, such as 12V DC, 24V DC, or even 110V AC, depending on the gate opener system.
  • Compatibility: While some receivers are universal, many are designed to work with specific brands or types of remote controls.
  Importance The radio receiver is a vital component of any automated gate system, providing:
  • Convenience: It allows users to open and close gates remotely, eliminating the need to manually operate them.
  • Security: With coded and encrypted signals, it ensures that only authorized individuals can access the property.
  • Flexibility: Many receivers can be programmed to work with multiple remote controls, accommodating various users.
Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Radio receiver RQ1M433 – IT1
Compare

Radio receiver RQ1M433 – IT1

$119.25

Ship or pick up from our office.

Radio receiver RQ1M433 – IT1

(Compatible with the wireless keypad control KW402 & KW125) *Made in Italy *AC/DC 12-24 V *1-CH *433.92 MHz *Capacity: 30 remotes
Add to wishlist
Add to cart
Quick view
Radio receiver RGRR2C
Compare

Radio receiver RGRR2C

$55.15

Ship or pick up from our office.

Radio receiver RGRR2C

*AC/DC 12-24 V *2-CH *433 MHz *Rolling code
Add to wishlist
Add to cart
Quick view
Radio receiver RQ2C433A - IT2
Compare

Radio receiver RECT102-V2.0 – CH2

$53.50

Ship or pick up from our office.

Radio receiver RECT102-V2.0 - CH2

(Compatible with the wireless keypad control KW402 & KW125) *AC/DC 12-24 V *2-CH *433.92 MHz *Capacity: 2000 remotes
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Radio remote control receiver

$61.95

Ship or pick up from our office.

Radio remote control receiver

One remote control is included (Compatible with Home-Link system) *DC 12-24 V *2 Channels *315 MHz
A radio remote control receiver is an electronic device that receives signals from a remote control and triggers the gate's motor to open or close.
It acts as the "ear" for the gate opener, interpreting the radio signals sent by the remote. These receivers are crucial for the functionality and convenience of automated gate systems. 
Here's a more detailed explanation:
Function: 
  • The receiver is designed to detect the specific radio frequency and code transmitted by the gate remote.
  • Upon receiving the correct signal, it activates the gate's motor, causing the gate to move.
Add to wishlist
Add to cart
Quick view

Related products

USB Gate Operator Remote
Compare

USB Gate Operator Remote

$107.30

USB Gate Operator Remote

A USB gate operator remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car's USB port and using it as a remote. USB Gate Operator Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. Here's a more detailed explanation: -How it works: USB Dongle: The device typically includes a small USB dongle that plugs into your car's USB port. Sensing Signal: When the USB is plugged in and the car is in the "on" mode, the dongle emits a sensing signal. Receiver: The signal is received by a unit connected to the driveway gate motor. Gate Motor Activation: The receiver then activates the gate motor, causing the driveway gate to open or close. -Key features: Dual Control Modes: Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle. Compact and Portable: The USB dongle is small and lightweight, making it easy to use and store in your car. Easy Installation: It's designed for simple plug-and-play functionality, requiring no complex setup. Replacement Accessory: It serves as a convenient replacement for traditional gate remote controls.
Add to wishlist
Add to cart
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Manual release key *1 x Safety sensor
A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view
Reflective safety sensor PQ58
Compare

Reflective safety sensor PQ58

$116.80

Ship or pick up from our office.

Add to wishlist
Add to cart
Quick view
Safety sensor VDS-TEC2
Compare

Safety sensor VDS-TEC2

$88.30

Ship or pick up from our office.

Safety sensor VDS-TEC2

Technical Details:
  • NO/NC
  • AC/DC 12-24 V
  • Receiving Range: 15 Meters
  • IP 44
Universal light with barriers for any door design automation. The range can be reduced to 30% in bad weather conditions: fog, rain, dust, etc. Compatible with all models of gate openers, such as single swing, double swing, and sliding gates. When someone passes the infrared region, the detector will send an alarm signal to the control board(which is not included).
  • Compact
  • Lightweight
  • Portable
  • Easy to use
Safety sensor VDS-TEC2 works with our SIMPLY sliding gate operator or EGO swing gate opener, and all different sliding gate openers and swing gate operator brands. The VDS-TEC2 is a type of photoelectric safety sensor primarily used in automated gate and door systems, including swing and sliding gates.
Here's a breakdown of its key characteristics:
  • Function: It works by emitting an infrared light beam between two units: a sender and a receiver. If an object (like a person or vehicle) breaks this invisible beam, the sensor detects the interruption.
  • Safety Feature: When the beam is broken, the VDS-TEC2 sends a signal to the gate's control board. This triggers an action, most commonly preventing the gate from closing to avoid accidents or activating an alarm.
  • Applications: Its main application is in enhancing the safety of automated gates and doors in various settings, ensuring that they don't close on obstructions. It is compatible with different models of gate openers.
  • Technical Specifications:
    • Contacts: NO/NC (Normally Open/Normally Closed)
    • Power Supply: AC/DC 12-24 V
    • Receiving Range: Up to 15 meters (this range can be reduced in adverse weather conditions like fog, rain, or dust).
    • IP Rating: IP44 (meaning it's protected against solid objects larger than 1mm and against splashing water from any direction).
  • Design: It's described as compact, lightweight, portable, and easy to use.
In essence, the VDS-TEC2 acts as a crucial safety mechanism to prevent accidents and damage in automated gate and door operations.
Add to wishlist
Add to cart
Quick view
Sold outHot
Swing gate opener -Royalgate RGSW650
Compare

Double swing gate opener -Royalgate RGSW650

,
$644.40

Ship or pick up from our office.

Double swing gate opener -Royalgate RGSW650

The Royalgate RGSW650 is a double swing gate opener designed to automate the opening and closing of two-leaf swing gates. It is manufactured by Royal Electronics Technology Center Co. (RETCC). Here's a breakdown of its key features and specifications:
  • Type: It's an articulated arm electric gate opener. This means it uses a two-part arm with an "elbow" joint that connects the motor to the gate. This design is often easier to install compared to other types.
  • Suitable Gate Weight: It's designed for gates with a maximum weight of 200 kg per leaf. (Note: One source indicates 100 kg per leaf, while another says 200 kg. It's advisable to confirm the exact specification with the vendor).
  • Power: It can be either 120VAC or 24VDC.
  • Safety Features: Like many modern gate openers, it likely includes obstacle detection, meaning the gates will stop or reverse if they encounter an object during operation. It also typically comes with a safety sensor.
  • Included Components: A typical package includes:
    • 2 x Electromechanical arms
    • 1 x Main control board
    • 1 x Waterproof box
    • 2 x Remote controls
    • 2 x Manual release keys
    • 1 x Safety sensor
  • Installation: Articulated arm gate operators are often a good choice when the gate opener needs to be mounted on a large gate pier or pillar.
  • Additional Features (may vary by model/kit): Some models and associated accessories can offer features like Wiegand input/output for external card readers, tamper alarms, backlit keypads, short circuit protection, and adjustable settings for door output time and alarm time.
In essence, the Royalgate RGSW650 provides an automated and secure solution for residential and commercial properties with double swing gates, offering convenience and control over access.
Add to wishlist
Read more
Quick view
Wifi gate opener
Compare

WiFi Gate/Door controller

$76.80
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS MP110
Compare

Dual swing gate opener -VDS MP110

,
$1,230.35

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener -VDS MP110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor The VDS MP110 is a model of electromechanical swing gate opener manufactured by VDS Automation. It's designed for automating single or double leaf swing gates, commonly used for residential and light-industrial applications. Here's a breakdown of its key features and specifications: Key Features
  • Suitable Gate Size and Weight:
    • It can handle gates with a maximum weight of up to 200 kg (per leaf).
    • It supports gate leaf lengths ranging from 1.80 meters up to 3.50 meters.
  • Durable Construction: It features a sturdy aluminum structure and a strong rolled warm shaft, indicating robust build quality for longevity.
  • Quiet Operation: The VDS MP110 is known for its very quiet operation.
  • Safety Features:
    • Anti-squashing system (EN 12453): This is a crucial safety feature that prevents the gate from exerting excessive force if it encounters an obstruction, minimizing the risk of injury or damage.
    • Slowing down function (EN 12453): This allows the gate to slow down before reaching its fully open or closed position, ensuring smoother operation and reducing impact.
    • Thermal cut-out 140°: This protects the motor from overheating.
  • Manual Release: It includes a manual release with a key, allowing you to operate the gate manually in case of a power outage.
  • Lubrication: Mechanical parts are lubricated with lithium grease to protect against corrosion, oxidation, and rust.
  • Opening Angle: It offers a 120° opening capability. Some systems can be further enhanced for a 180-degree opening with optional chain drive systems.
  • Easy Installation: It is designed for quick installation with multi-position brackets and technopolymer covers for the brackets.
  • Motor and Power: It features a high-performance electric motor and typically operates on a 120V AC power supply, though some versions may support 24V DC.
  • Limit Switches: It has a standard opening limit switch, with an optional closing limit switch.
Variants The VDS MP110 series likely includes variations with different rod stroke lengths (e.g., 300mm, 400mm, 500mm), which determine the maximum gate leaf length they can accommodate.
Add to wishlist
Add to cart
Quick view
Gate Opener Remote Control -C4
Compare

Gate Opener Remote Control -C4

$39.85

Ship or pick up from our office.

Gate Opener Remote Control -C4

*433 MHz *2-4 Buttons *More than 10 different designs
Key features and functions of a gate opener remote control:
  • Remote Operation:
    Enables opening and closing the gate from a distance, typically within a certain range (e.g., 100 feet). 
  • Radio Signal Transmission:
    Emits a radio signal to the gate's receiver unit, initiating the gate's movement. 
  • Compatibility:
    Most remotes are compatible with specific gate openers and require the same frequency to function. 
  • Programming:
    Can be programmed with the gate's receiver unit, often involving a "learn" or "program" button on the gate opener. 
  • Multiple Remotes:
    Many gate openers can be paired with multiple remotes, allowing multiple users to control the gate. 
  • Universal Remotes:
    Some universal remotes can be programmed to work with different gate opener brands, as long as they are compatible. 
  • Safety Features:
    Some gate openers incorporate safety features like sensors that detect obstructions and reverse the gate's movement. 
Add to wishlist
Add to cart
Quick view