Gate Opener Remote Control
Copy_code_universal
Click to enlarge
Gate Opener Remote Control
Copy_code_universal
Radio receiver
Radio receiver RG315-24V1C $33.45
Back to products
Power converter - AC 24 V to DC 12 V
Power converters - AC 24 V to DC 15 V $34.00

Gate Opener Remote Control

$28.35

Ship or pick up from our office.

Gate Opener Remote Control

– Copy Code type

Gate opener remote controls use two main code types for copying: fixed code and rolling code.

Fixed code remotes are simpler and easier to clone, while rolling code remotes offer enhanced security and require more advanced techniques for copying. 

Gate Opener Remote Control Fixed Code type:
  • How it works: A fixed code remote transmits the same code every time it’s pressed. 
  • Cloning: These are generally easier to clone using a universal remote duplicator. 
  • Security: Less secure than rolling code, as the code can be intercepted and copied. 
  • Example: Commonly found in older or simpler gate opener systems. 
Compare
Add to wishlist
Category: Tags: , , , , ,
Description

Gate Opener Remote Control

Example: Commonly found in older or simpler gate opener systems. 

Gate Opener Remote Control Rolling Code type:
  • How it works:

    A rolling code remote changes its code each time it’s used, making it much more difficult to copy. 

  • Cloning:
    Requires specialized equipment and techniques, like pairing with the receiver. 

    COMPATIBILITY LIST:

    BFT, CARDIN, BENINCA, CAME, DEA, DITEC, DOORMATIC,
    DOORHAN, DUCATI, ERRECA, FAAC, FADINI, GENIE, GENIUS, GIBIDI, HORMAN, KEY
    AUTOMATION, KING GATES, LIFE, LINEAR, MHOUSE, MOOVO, NICE, PROTECO, RIB,
    SEA, V2, SOMFY, SOMMER, TAU, TELCOMA, VDS, KING GATES, and more…

  • Security:

    Highly secure, as each code is unique and only valid for a single use. 

  • Example:

    Used in most modern gate and garage door opener systems for increased security. 

Cloning Techniques:
  • Fixed Code:

    The process usually involves pressing and holding buttons on both the original and the cloning remote simultaneously until the cloning remote receives the signal and copies the code. 

  • Rolling Code:

    Cloning rolling code remotes is more complex, often requiring access to the receiver unit and following specific programming procedures outlined by the manufacturer. 

  • Universal Remote:

    Universal remotes can sometimes be programmed to copy fixed codes, but may not be compatible with all rolling code systems. 

Important Considerations:
  • Always refer to the specific instructions for your gate opener and remote control model.
  • If cloning a rolling code remote, ensure compatibility with your system and follow the manufacturer’s instructions carefully. 
  • If you are unsure about the cloning process, consult a professional gate technician. 
Additional information
Weight 0.08 kg
Dimensions 8 × 5 × 3 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Gate Opener Remote Control”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Radio receiver RGRR2C
Compare

Radio receiver RGRR2C

$55.15

Ship or pick up from our office.

Radio receiver RGRR2C

*AC/DC 12-24 V *2-CH *433 MHz *Rolling code
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view
Radio receiver RQ2C433A - IT2
Compare

Radio receiver RECT102-V2.0 – CH2

$53.50

Ship or pick up from our office.

Radio receiver RECT102-V2.0 - CH2

(Compatible with the wireless keypad control KW402 & KW125) *AC/DC 12-24 V *2-CH *433.92 MHz *Capacity: 2000 remotes
Add to wishlist
Add to cart
Quick view
Radio receiver RQ1M433 – IT1
Compare

Radio receiver RQ1M433 – IT1

$119.25

Ship or pick up from our office.

Radio receiver RQ1M433 – IT1

(Compatible with the wireless keypad control KW402 & KW125) *Made in Italy *AC/DC 12-24 V *1-CH *433.92 MHz *Capacity: 30 remotes
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Radio receiver RG315-24V1C

$33.45

Ship or pick up from our office.

Radio receiver RG315-24V1C

*DC 24 V *1 Channel *315 MHz * Compatible with the Homelink system A gate opener radio receiver is an electronic device that acts as the "ear" for an automatic gate system. Its primary function is to receive radio signals from a remote control (transmitter) and, upon recognizing a valid signal, instruct the gate opener's control board to activate the gate motor to open or close the gate. How it Works Here's a breakdown of how a gate opener radio receiver typically operates:
  • Signal Reception: When you press a button on your remote control, it sends out a radio signal at a specific frequency (e.g., 300MHz, 310MHz, 318MHz, 433MHz).
  • Compatibility: The receiver is tuned to the same frequency as the remote control. For the system to work, the receiver and remote must also be compatible in terms of brand and radio protocol (e.g., rolling code, fixed code).
  • Decoding: The receiver decodes the radio signal it receives. Modern systems often use "rolling code" technology for enhanced security, where the code changes with each use, making it very difficult for unauthorized individuals to duplicate or intercept.
  • Command Relay: Once the signal is decoded and validated, the receiver relays the command to the gate opener's main control board.
  • Gate Activation: The control board then triggers the gate motor, causing the gate to open or close.
  Types and Features Gate opener radio receivers come in various forms and with different features:
  • Internal vs. External: Some gate openers have built-in receivers, while others utilize external receivers that connect to the system. External receivers can be used as replacements if an internal one fails or to add functionality.
  • Channels: Receivers can be single-channel (controlling one gate) or multi-channel (controlling multiple gates or other devices).
  • Frequency: Receivers operate on specific radio frequencies, and it's crucial that the remote control matches the receiver's frequency.
  • Security: Newer receivers often incorporate advanced security features like rolling codes or encrypted protocols to prevent unauthorized access.
  • Range: The effective range of a receiver varies, typically from 50 to 100 feet, but some long-range receivers can extend this distance.
  • Power Input: Receivers can operate on various voltages, such as 12V DC, 24V DC, or even 110V AC, depending on the gate opener system.
  • Compatibility: While some receivers are universal, many are designed to work with specific brands or types of remote controls.
  Importance The radio receiver is a vital component of any automated gate system, providing:
  • Convenience: It allows users to open and close gates remotely, eliminating the need to manually operate them.
  • Security: With coded and encrypted signals, it ensures that only authorized individuals can access the property.
  • Flexibility: Many receivers can be programmed to work with multiple remote controls, accommodating various users.
Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Radio receiver RG315-24V2C
Compare

Radio receiver RG315-24V2C

$36.15

Ship or pick up from our office.

Radio receiver RG315-24V2C

*DC 24 V *2 Channels *315 MHz * Compatible with Homelink systems
Add to wishlist
Add to cart
Quick view
Radio receiver RGRR1C
Compare

Radio receiver RGRR1C

$51.90

Ship or pick up from our office.

Radio receiver RGRR1C

*AC/DC 12-24 V *1-CH *433 MHz *Rolling code
Add to wishlist
Add to cart
Quick view
Radio receiver R5130
Compare

Radio receiver R5130

$56.75

Ship or pick up from our office.

Radio receiver R5130

(Compatible with the wireless keypad control KW125) *AC/DC 12-24 V *2 Channels *433.92 MHz
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Radio remote control receiver

$61.95

Ship or pick up from our office.

Radio remote control receiver

One remote control is included (Compatible with Home-Link system) *DC 12-24 V *2 Channels *315 MHz
A radio remote control receiver is an electronic device that receives signals from a remote control and triggers the gate's motor to open or close.
It acts as the "ear" for the gate opener, interpreting the radio signals sent by the remote. These receivers are crucial for the functionality and convenience of automated gate systems. 
Here's a more detailed explanation:
Function: 
  • The receiver is designed to detect the specific radio frequency and code transmitted by the gate remote.
  • Upon receiving the correct signal, it activates the gate's motor, causing the gate to move.
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Radio receiver RG315-12V2C

$36.15

Ship or pick up from our office.

Radio receiver RG315-12V2C

*DC 12 V *2-CH *315 MHz * Compatible with Homelink system
Add to wishlist
Add to cart
Quick view

Related products

Smart Video Doorbell
Compare

Smart Video Doorbell

$169.35

Ship or pick up from our office.

Smart Video Doorbell

*WiFi connection *Android/IOS app on the smartphone *Answer visitors using smartphone worldwide
Add to wishlist
Add to cart
Quick view
Smartphone Gate Controller
Compare

Smartphone Gate Controller

$76.80

Ship or pick up from our office.

Smartphone Gate Controller

A Smartphone gate controller module primarily connects to your existing gate opener by essentially "mimicking" the action of a traditional wired push button or a remote control. Here's a breakdown of the common connection methods:
1. Wired Connection to the Gate Opener's Control Board (Most Common):
  • "Dry Contact" or "Push Button" Terminals: Most gate opener control boards have terminals designed for a wired wall control panel or push button. These are often labeled as "COM" (Common), "PUSH," "START," "CYCLE," or similar.
  • Relay Connection: The Wi-Fi gate controller module typically contains a relay. When you send a command from your smartphone app, the module activates this relay. The relay then momentarily closes a circuit between the designated terminals on your gate opener's control board. This "short circuit" or "dry contact" action is interpreted by the gate opener as a signal to open or close, just as if you had pressed a physical button.
  • Power Supply: The Wi-Fi module itself needs power. It can often be powered directly from the gate opener's control board (if it provides a suitable low-voltage output, e.g., 7-32V), or it might require a separate power adapter (like a 5V USB power supply).
2. "Hacking" an Existing Remote Control (DIY Approach):
  • Some DIY solutions involve wiring the Wi-Fi module to the internal contacts of an existing gate remote control.
  • The module then "presses" the button on the remote control electronically, sending the same signal the remote would normally send to the gate opener. This is less common for commercial products and more of a hobbyist project.
    Key Components and How They Work Together:
  • Wi-Fi Connection: The module connects to your home's Wi-Fi network (2.4 GHz). This allows your smartphone (via the internet) to communicate with the module.
  • Control Board (within the module): This is the "brain" of the module, receiving commands from your smartphone and translating them into signals for the gate opener.
  • Relay: The electromechanical switch that closes the circuit on the gate opener's control board.
  • Input Terminals (optional): Some modules may have inputs for sensors (e.g., magnetic sensors) that can tell you the gate's open/closed status, which is then communicated back to your app.
    General Installation Steps:
  1. Locate the Gate Opener Control Board: This is usually found within the gate opener's housing.
  2. Identify the Control Terminals: Refer to your gate opener's manual to find the terminals for a push button or wall control.
  3. Wire the Module: Connect the output wires from the Wi-Fi module's relay to the appropriate control terminals on the gate opener's board.
  4. Power the Module: Connect the module to a suitable power source.
  5. Connect to Wi-Fi and App: Follow the manufacturer's instructions to connect the module to your Wi-Fi network and pair it with the smartphone app.
  6. Test: Test the functionality from your smartphone.
    Important Considerations:
  • Compatibility: Always check the compatibility of the Wi-Fi module with your specific gate opener brand and model. Some modules are universal, while others are designed for certain manufacturers.
  • Wiring Diagrams: Always consult the wiring diagrams provided by both your gate opener manufacturer and the Wi-Fi module manufacturer.
  • Safety: If you're not comfortable with electrical wiring, it's best to consult a professional electrician or gate technician.
  • Wi-Fi Signal Strength: Ensure a strong 2.4 GHz Wi-Fi signal at the location of the gate opener for reliable operation. You may need a Wi-Fi extender if the gate is far from your router.
Add to wishlist
Add to cart
Quick view
Hot
swing gate opener NICE Wingo 4024
Compare

Double Swing Gate Opener NICE -Wingo 4024

,
$1,363.45

Ship or pick up from our office.

Product Sheet PDF

Double Swing Gate Opener NICE -Wingo 4024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Operators are designed to fit a wide range of settings and applications. The Double Swing Gate Opener NICE - Wingo 4024 is an electromechanical gear motor system designed for automating double swing gates. It's primarily used for residential and light industrial applications, offering a convenient and secure way to open and close gates without manual effort. Here's a breakdown of its key features and specifications: Key Features
  • Electromechanical Gear Motor: It utilizes a 24 Vdc electromechanical gear motor, known for its reliability and quiet operation.
  • Suitable for Various Gate Sizes: It can handle swing gates with individual leaves up to 2 meters in length or up to 400 kg in weight (for a gate leaf of 1 meter).
  • Surface Mounted: The system is designed for surface mounting, meaning the motors are installed directly onto the gate posts or pillars.
  • Easy Installation: Electrical connections are made from above the gear motor, simplifying the installation process.
  • User-Friendly Release: In case of a power failure, the gate can be manually unblocked and moved with a personalized Nice key or standard lock (optional).
  • Moonclever Control Unit (MC424L/MC824H): This advanced control unit offers several intelligent functions:
    • Simple Programming: Easy setup with a single button.
    • Automatic Memorization: Self-learning function for limit switches on opening and closing.
    • Anti-Crush Safety: Features a clutch with an anti-crush safety device to prevent damage or injury.
    • Obstacle Detection: Uses dual technology to detect obstacles during operation.
    • Programmable Functions: Allows for programming of pause time, pedestrian pass door function, and deceleration at the beginning and end of cycles.
    • Battery Backup Option: Can operate during power failures with optional rechargeable batteries (PS124/PS324) that fit inside the control unit.
    • Resistive Sensitive Edge Connection: Can be connected to 8.2 KOhm resistive sensitive edges for enhanced safety.
  • Durable Construction: Features tough aluminum shells with polyester paint finish, making it resistant to atmospheric agents. Internal moving parts are made of steel, light alloys, and techno-polymers for durability.
  • Mechanical Limit Switches: Includes pre-assembled mechanical limit switches for setting the open position.
Add to wishlist
Add to cart
Quick view
Exit Button SQTPB801
Compare

Exit Button SQTPB801

$22.85

Ship or pick up from our office.

Exit Button SQTPB801

*Touch *Backlight *DC 12V *COM-NC-NO
An exit button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms. 
Here's a more detailed explanation:
  • Function:
    An exit button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit. 
  • Purpose:
    They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available. 
  • Types:
    Exit buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them. 
  • Importance:
    These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals. 
  • Applications:
    Exit buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities. 
Add to wishlist
Add to cart
Quick view
Gate Opener Remote Control -C4
Compare

Gate Opener Remote Control -C4

$39.85

Ship or pick up from our office.

Gate Opener Remote Control -C4

*433 MHz *2-4 Buttons *More than 10 different designs
Key features and functions of a gate opener remote control:
  • Remote Operation:
    Enables opening and closing the gate from a distance, typically within a certain range (e.g., 100 feet). 
  • Radio Signal Transmission:
    Emits a radio signal to the gate's receiver unit, initiating the gate's movement. 
  • Compatibility:
    Most remotes are compatible with specific gate openers and require the same frequency to function. 
  • Programming:
    Can be programmed with the gate's receiver unit, often involving a "learn" or "program" button on the gate opener. 
  • Multiple Remotes:
    Many gate openers can be paired with multiple remotes, allowing multiple users to control the gate. 
  • Universal Remotes:
    Some universal remotes can be programmed to work with different gate opener brands, as long as they are compatible. 
  • Safety Features:
    Some gate openers incorporate safety features like sensors that detect obstructions and reverse the gate's movement. 
Add to wishlist
Add to cart
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Manual release key *1 x Safety sensor
A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view
Keypad access control K170S300A
Compare

Keypad Access Control K170S300A

$134.30

Keypad Access Control K170S300A

*Rain Shield Cover Included *Waterproof Version *EM/ID card/tag reader *Backlight *DC 12 V *Shock resistance *Anti-vandal Metal shell *Doorbell Button Wiegand Output: Equipped with a Wiegand output for seamless integration with a controller. Multiple Access Modes: Offers Card, PIN, or Card + PIN options, providing versatile access control methods. Durable Metal Case: Housed in a robust Zinc Alloy electroplated case, ensuring durability and vandal resistance. RFID Key Fob Duplicator Attribute-Based Access Control Vs Role-Based Access Control 1,000 User Capacity: Supports up to 1,000 users, ideal for large-scale access control in commercial and industrial settings. Backlight Keypad: Features a backlight keypad for easy operation in low-light conditions.

Description

1000 Users Metal Case 125KHZ RFID Card Keypad Access Controller with Backlight Door Control Independent Code Access Device Description Single door multifunction standalone access controller or a Wiegand output keypad or card reader. It is suitable for mounting either indoor or outdoor in harsh environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case which is availabl in either a bright silver or matt silver finish. Metal Case&Waterproof .Supports up to 1000 users in either a Card, 4 digit PIN, or a Card + PIN option. The inbuilt card reader supports125KHZ EM cardsLock output current short circuit protection, Wiegand output , and a backlight keypad. Ideal choice for door access not only for small shops and domestic households but als for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons. Features Simple Programming, Easy Operatio Adopt function steady card reader of block Keypad Locks for 30 Seconds After 10 False Entrie Can be Connected with Door-open Button and Doorbel Non-volatile Memory in Power Failure Tamper Switch can be Connected to Security Alarm System Backlight key Wiegand 26 output for connection to a controller Support 1000Users
Add to wishlist
Add to cart
Quick view
Swing gate opener -Zero ZSW400
Compare

Dual swing gate opener -ZERO ZSW600

,
$1,428.70

Ship or pick up from our office.

Dual swing gate opener -ZERO ZSW600

*Suitable gate weight: Maximum 300 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view