Wireless exit push button
Click to enlarge
Radio receiver
Radio receiver RG315-24V1C $33.45
Back to products
Power converter - AC 24 V to DC 12 V
Power converters - AC 24 V to DC 15 V $34.00

Wireless exit push button

$125.45

Ship or pick up from our office.

Wireless exit push button

* 1 Channel

* DC 12V

* COM-NC-NO

* 20 meters range in an open area

* Radio receiver included

Compare
Add to wishlist
Category: Tags: , , , , , , , ,
Description

Wireless exit push button

A Wireless Exit Push Button is a device used in access control systems that allows individuals to exit a secured area by wirelessly transmitting a signal to unlock the door or activate an exit mechanism.

A wireless exit push button typically consists of a transmitter (the push button) and a receiver, which is connected to the access control system. When the button is pressed, it sends a radio frequency (RF) signal to the receiver, which then unlocks the door. 

The wireless exit push button works as a remote control to operate a driveway gate, garage door, or an electric lock, and it has to be installed at a spot nearest to the radio receiver, on a wall that does not have metal behind.
Here’s a more detailed breakdown:
Components:
  • Transmitter (Push Button):

    A physical button, often wireless, that is pressed to initiate the exit request. 

  • Receiver:

    A device that receives the wireless signal from the transmitter and is connected to the access control system (e.g., electric strike, magnetic lock). 

  • Power Source:

    The transmitter and receiver may require separate power sources, or some models might be batteryless and generate their power upon button press. 

How it works:
  1. Activation: When a person presses the wireless exit button, it sends a radio frequency (RF) signal to the receiver.
  2. Signal Reception: The receiver picks up the RF signal from the transmitter.
  3. System Trigger: The receiver then relays this signal to the access control system.
  4. Door Release: The access control system, in response to the signal, will either unlock the door or activate the mechanism that allows the door to be opened. 
Benefits of Wireless Exit Buttons:
  • Ease of Installation:

    Wireless models are easier to install, as they don’t require wiring through walls or ceilings. 

  • Flexibility:

    Wireless buttons can be placed in various locations without needing to be near a power source or wiring. 

  • ADA Compliance:

    Many wireless exit buttons are designed for accessibility, making them suitable for users with disabilities. 

  • Safety:

    They ensure a safe and easy exit from secured areas, especially in emergencies. 

  • Integration:
    Wireless exit buttons are designed to seamlessly integrate with existing access control systems. 
Additional information
Weight 0.2 kg
Dimensions 16 × 11 × 6 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Wireless exit push button”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Exit push button SQTPB601
Compare

Exit push button SQTPB601

$28.50

Ship or pick up from our office.

Exit push button SQTPB601

*No Touch *Backlight *DC 12V *COM-NC-NO The Exit push button SQTPB601 is a wired exit push button used in access control systems. It's a device that allows individuals to exit a secured area by signaling the access control system to unlock a door or activate an exit mechanism. Here's a breakdown of what that means: Key Characteristics 🔑
  • Wired: Unlike wireless versions, the SQTPB601 requires a physical electrical connection to the access control system. This typically means running wires from the button to the door's locking mechanism or an access control panel.
  • Exit Button/Request to Exit (REX) Device: Its primary function is to provide a simple and reliable way for people inside a secured area to exit without needing credentials (like a key card or code).
  • Access Control Integration: It works in conjunction with an access control system (e.g., controlling an electric strike or magnetic lock) to manage who can enter and exit a building or specific area.
  • Momentary Action: When pressed, it typically sends a momentary signal to release the lock, and then the circuit returns to its normal state when the button is released.
  • Common Applications: You'll find these buttons in various commercial, industrial, and even residential settings where controlled access is desired, such as offices, warehouses, schools, and apartment buildings. They are crucial for safety, convenience, and compliance with building and fire codes that often require an unimpeded means of egress.
  How it Works ⚙️ When a person presses the SQTPB601 exit button:
  1. It sends an electrical signal to the connected access control system or directly to the door's locking mechanism.
  2. This signal temporarily disengages the lock (either a fail-safe or fail-secure lock), allowing the door to open.
  3. Once the button is released, the circuit returns to its normal state, and the lock re-engages, securing the door again.
  Importance in Security Systems 🔐 Exit push buttons like the SQTPB601 are vital components in a comprehensive security system because they:
  • Ensure Free Egress: They provide a guaranteed way for people to exit a building, even if the primary access control system fails or in an emergency.
  • Enhance Safety: In situations like fires or other emergencies, they allow for quick and unhindered evacuation.
  • Meet Compliance Standards: Many building and fire safety codes require a means of manual exit from secured areas.
  • User-Friendly: They offer a simple and intuitive way for anyone to exit a controlled space.
Add to wishlist
Add to cart
Quick view
Wired exit push button SQTPB701H
Compare

Exit Push Button SQTPB701H

$29.75

Ship or pick up from our office.

Exit Push Button SQTPB701H

*No Touch *Backlight *DC 12V *COM-NC-NO
A wave exit push button, also known as a touchless exit button or wave-to-exit switch, is a device that allows users to open a door without physically touching it.
It uses motion sensing technology, typically infrared or microwave, to detect a hand gesture and trigger the door to open. This provides a more hygienic and convenient way to exit a space, especially in environments where minimizing physical contact is desirable. 
Here's a more detailed explanation:
Functionality:
  • Touchless Activation:
    The core function is to activate a door release mechanism (like a magnetic lock or strike) with a simple wave of the hand. 
  • Motion Sensing:
    Wave exit buttons utilize sensors (infrared or microwave) to detect the movement of a hand or object in front of the device. 
  • Contactless Exit:
    This eliminates the need to physically push a button, reducing the spread of germs and providing a more hygienic exit solution. 
Common Applications:
  • Healthcare facilities: Hospitals, clinics, and laboratories where hygiene is paramount. 
  • Food service and preparation areas: Restaurants and kitchens where cleanliness is crucial. 
  • High-traffic areas: Office buildings, schools, and public spaces where many people need to exit frequently. 
  • Disabled access: Provides a convenient and accessible way for individuals with mobility limitations to exit. 
Benefits:
  • Hygiene:
    Reduces the risk of spreading germs and viruses by eliminating the need to touch a button. 
  • Convenience:
    Allows for hands-free operation, making it easier to exit with arms full or for individuals with mobility limitations. 
  • Durability:
    Often more durable than traditional push buttons due to fewer moving parts. 
  • Accessibility:
    Provides a more inclusive exit solution for all individuals. 
Add to wishlist
Add to cart
Quick view
Exit push button SSPB102
Compare

Exit push button SSPB102

$19.45

Ship or pick up from our office.

Exit push button SSPB102

An "exit push button SSPB102" is likely an exit button used in access control systems for doors and gates. While "SSPB102" isn't a universally recognized standard model number that immediately brings up a specific product, the term "exit push button" refers to a device that, when pressed, temporarily releases an electronic lock, allowing a person to exit a secured area. These buttons are crucial for:
  • Emergency Egress: Providing a fail-safe mechanism to unlock doors during emergencies like fires, even if other access control components fail.
  • Convenience: Allowing easy exit from an area without needing a key card or code.
  • Code Compliance: Often required by building and fire safety codes as a backup exit device.
Common features of exit push buttons include:
  • Momentary Contact: The button only activates the release when pressed and held, or provides a momentary signal to an access control panel that then releases the lock for a set duration (e.g., 30 seconds).
  • Normally Open (NO) or Normally Closed (NC) Contacts: Refers to the default state of the electrical circuit when the button is not pressed.
  • Illumination: Many buttons have an LED light to indicate their status or for visibility.
  • Durability: Designed for frequent use in high-traffic areas.
  • Mounting Options: Can be flush-mounted or surface-mounted, and come in various sizes (e.g., single gang, narrow stile).
Without a specific manufacturer or more context, "SSPB102" might be a part number unique to a particular brand or supplier. Searching for "SSPB102" alone often brings up results for unrelated items like stamps or music albums, indicating it's not a widely recognized industry code for exit buttons.
Add to wishlist
Add to cart
Quick view
Wireless exit push button
Compare

Wireless exit push button

$158.90

Ship or pick up from our office.

Wireless exit push button

* 2 Channels * DC 12V * COM-NC-NO * 20 meters range in an open area * Radio receiver included
Add to wishlist
Add to cart
Quick view
Exit Button RCTPB801
Compare

Exit Button RCTPB801

$22.85

Ship or pick up from our office.

Exit Button RCTPB801

*Touch *Backlight *DC 12V *COM-NC-NO
An Exit push button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms. 
Here's a more detailed explanation:
  • Function:
    An exit push button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit. 
  • Purpose:
    They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available. 
  • Types:
    Exit push buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them. 
  • Importance:
    These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals. 
  • Applications:
    Exit push buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities. 
Add to wishlist
Add to cart
Quick view

Related products

Swing gate opener -VDS EGO110
Compare

Double swing gate opener –VDS EGO110

,
$1,181.30

Ship or pick up from our office.

Product Sheet PDF

Double swing gate opener –VDS EGO110

More information about the swing gate openers: WHAT ARE THE DIFFERENT TYPES OF SWING GATE MOTORS? 1- Articulated Arm for Swing Gate Operators How do automatic gates work with articulated swing gate motors? An articulated arm electric gate opener uses a two-part arm with an ‘elbow’ joint to connect the motor to the gate. This arm protrudes from the gate motor body, so there has to be room for the arm to move as the driveway gate opens and closes. This type of electric gate opener is easier to install than other types, thanks to the geometry of the arm system. They can be slightly more expensive than other gate motors, but they open and close automated gates quickly. Many homeowners like discrete gate automation systems, and articulated arm motors can be more obvious when installed. However, many have the control system built into one of the motors. These motors for automatic gates are mounted on the inside of gates so they’re not seen from the outside of closed gates. In the event of power failure or mechanical breakdown, articulated arm motors can normally be released manually from outside the gate with an optional cable release system. All articulated arm gate operators are electric gate motors that can be either 120VAC or 24VDC. All 24V and some 120V versions have obstacle detection. This means that the gates stop moving and some even reverse when they come into contact with an object during operation. Articulated arm gate automation systems can be the best choice where each electric gate opener is mounted on a large gate pier or pillar. 2- Ram And Linear Screw Automatic Swing Gate Openers Ram gate automation motors push and pull a piston mounted on the gate. Linear screw electric motors for gates use an electric motor to rotate the gate mounting along a threaded shaft. Both types of electric gate motors are slim and don’t need a lot of space to operate. However, this advantage does mean that they require careful alignment during installation. Manual release systems are only available from inside the driveway gate. A ram or linear screw type of motor for automatic gate control is attached to the gate at one end and the gate pillar or post at the other end. Ram motors can be hydraulic or driven by electric motors, but all require a separate control box. As with articulated arm motors, 120Vac, and 24Vdc, you can buy versions with obstacle detection for safer operation. Additionally, heavy-duty versions of each type of electric gate opener are available that will operate larger gates with leaves up to 7m long. These electric gate openers can be the best gate automation solution when price is important. Their simpler design and operation can make them a cost-effective solution compared to other types of electric gate motors. 3- Underground Swing Gate Operators Many Canadian homeowners choose underground gate automation motors because they are very discreet. This is because each underground gate opener is hidden under the hinge end of each swing gate. But how do automatic gates work when they’re opened and closed by hidden underground motors? During installation, a carefully positioned hole must be dug to house a foundation box for each underground gate opener. The housing for each underground electric gate motor needs sufficient drainage to prevent the motors from sitting in water, or they will fail. Underground electric gate motors don’t need a lot of space to operate and can be installed on the inside or back of gate pillars. They are usually only installed behind gate pillars when the gates must open more than 90 degrees, so that the post or pillar does not obstruct the gates. With the addition of a 180-degree gate opener, your gates can open much wider than 90 degrees. This is an optional chain drive system for driveways that bend around behind the gate pillars. If the gate only opened to 90 degrees, it could block part of the driveway. But a 180-degree gate opener system means that it can keep going past 90 degrees, so it doesn’t block the driveway. Normally, underground automation of gates is the most expensive solution, but they are almost invisible. It is possible for the most powerful underground gate opener to open and close a swing gate up to 5m long. Underground motors for automatic gates can be manually released from outside the gate. These types of gate motors can be either hydraulic or electromechanical. A separate control box is required, and 120VAC and 24VDC versions with obstacle detection are available. Underground gate opener installation is not simple, and it should always be installed by professional electric gate engineers. Underground gate automation could be the best style for you if you want a discreet, almost invisible electric gate motor installation and you have the budget for this more expensive option.
Add to wishlist
Add to cart
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view
Sold outHot
Swing gate opener -Royalgate RGSW650
Compare

Double swing gate opener -Royalgate RGSW650

,
$644.40

Ship or pick up from our office.

Double swing gate opener -Royalgate RGSW650

The Royalgate RGSW650 is a double swing gate opener designed to automate the opening and closing of two-leaf swing gates. It is manufactured by Royal Electronics Technology Center Co. (RETCC). Here's a breakdown of its key features and specifications:
  • Type: It's an articulated arm electric gate opener. This means it uses a two-part arm with an "elbow" joint that connects the motor to the gate. This design is often easier to install compared to other types.
  • Suitable Gate Weight: It's designed for gates with a maximum weight of 200 kg per leaf. (Note: One source indicates 100 kg per leaf, while another says 200 kg. It's advisable to confirm the exact specification with the vendor).
  • Power: It can be either 120VAC or 24VDC.
  • Safety Features: Like many modern gate openers, it likely includes obstacle detection, meaning the gates will stop or reverse if they encounter an object during operation. It also typically comes with a safety sensor.
  • Included Components: A typical package includes:
    • 2 x Electromechanical arms
    • 1 x Main control board
    • 1 x Waterproof box
    • 2 x Remote controls
    • 2 x Manual release keys
    • 1 x Safety sensor
  • Installation: Articulated arm gate operators are often a good choice when the gate opener needs to be mounted on a large gate pier or pillar.
  • Additional Features (may vary by model/kit): Some models and associated accessories can offer features like Wiegand input/output for external card readers, tamper alarms, backlit keypads, short circuit protection, and adjustable settings for door output time and alarm time.
In essence, the Royalgate RGSW650 provides an automated and secure solution for residential and commercial properties with double swing gates, offering convenience and control over access.
Add to wishlist
Read more
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view
Compare

Underground Exit Wand Vehicle Detector

$187.30
Add to wishlist
Add to cart
Quick view
Wireless Keypad Access Control KW402
Compare

Wireless Keypad Access Control KW402

$89.95

Ship or pick up from our office.

Wireless Keypad Access Control KW402

*Wireless *Rain Shield Cover included *2 Channels *LED Back Light *433 MHz
The Wireless Keypad Access Control KW402 is the preferred secure activation device for the Autoslide Automatic Door System. This security keypad will allow you to enter your home from the outside using a unique programmed code. Combined with the VDS and ZERO gate motor, you can have a secure and automated entryway into and out of your home or workplace. The Wireless Keypad Access Control KW402 is wireless and provides the benefit of not having to run cables through your exterior walls. It has two channels that will allow you to not only have a regular access code but also one you can change for guests to access your home. The Wireless Keypad Access Control KW402 is programmable for two separate codes up to eight digits long each. Audible beeps will alert you to an accepted code as well as an invalid code.
Specifications:
Duplicate Your Existing Remote Controllers so you always have a backup:
1.Vehicle central locking systems
2. Garage doors
3. Electronic gates
4. Electrical appliances/Home automation i.e. lights
5. Car sunroofs
6. Car/Motorbike alarms Easy to use, the 4 channel remote control system lets you take control of your gets, car, home and garage

Wireless Keypad Access Control KW402:

1,This is a dual channel transmitters that are activated only after having entered a Suitable combination.
2, The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.
3,The estimated transmission range is 200 m in open space and 35m indoors .
4, The units are designed to ensure battery life equivalent to an estimated 2 years of oper-ation considering 10 transmissions/day.

Specification Wireless Keypad Access Control KW402:

Power:6Volt DC 2PCS CR2032 Li battery Battery life:2 years (4 times operation every day)
Frequency:433.92MHz+/-75KHz
Transmitter power:1Mw
Data format:standard
Work temp:-20~+55 centidegree
Password number:0-8
Water proof level:1p54
Dimension:85*75*35mm
Weight:150g
Add to wishlist
Add to cart
Quick view
Hot
swing gate opener NICE Wingo 4024
Compare

Double Swing Gate Opener NICE -Wingo 4024

,
$1,363.45

Ship or pick up from our office.

Product Sheet PDF

Double Swing Gate Opener NICE -Wingo 4024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Operators are designed to fit a wide range of settings and applications. The Double Swing Gate Opener NICE - Wingo 4024 is an electromechanical gear motor system designed for automating double swing gates. It's primarily used for residential and light industrial applications, offering a convenient and secure way to open and close gates without manual effort. Here's a breakdown of its key features and specifications: Key Features
  • Electromechanical Gear Motor: It utilizes a 24 Vdc electromechanical gear motor, known for its reliability and quiet operation.
  • Suitable for Various Gate Sizes: It can handle swing gates with individual leaves up to 2 meters in length or up to 400 kg in weight (for a gate leaf of 1 meter).
  • Surface Mounted: The system is designed for surface mounting, meaning the motors are installed directly onto the gate posts or pillars.
  • Easy Installation: Electrical connections are made from above the gear motor, simplifying the installation process.
  • User-Friendly Release: In case of a power failure, the gate can be manually unblocked and moved with a personalized Nice key or standard lock (optional).
  • Moonclever Control Unit (MC424L/MC824H): This advanced control unit offers several intelligent functions:
    • Simple Programming: Easy setup with a single button.
    • Automatic Memorization: Self-learning function for limit switches on opening and closing.
    • Anti-Crush Safety: Features a clutch with an anti-crush safety device to prevent damage or injury.
    • Obstacle Detection: Uses dual technology to detect obstacles during operation.
    • Programmable Functions: Allows for programming of pause time, pedestrian pass door function, and deceleration at the beginning and end of cycles.
    • Battery Backup Option: Can operate during power failures with optional rechargeable batteries (PS124/PS324) that fit inside the control unit.
    • Resistive Sensitive Edge Connection: Can be connected to 8.2 KOhm resistive sensitive edges for enhanced safety.
  • Durable Construction: Features tough aluminum shells with polyester paint finish, making it resistant to atmospheric agents. Internal moving parts are made of steel, light alloys, and techno-polymers for durability.
  • Mechanical Limit Switches: Includes pre-assembled mechanical limit switches for setting the open position.
Add to wishlist
Add to cart
Quick view