USB Gate Operator Remote
Click to enlarge
Gate Opener Remote Control 1400FT315/2-CH
Gate Opener Remote Control 1400FT315/2-CH $49.85
Back to products
Keypad Access Control K155ST15
Keypad Access Control K155ST15 $99.90

USB Gate Operator Remote

$107.30

USB Gate Operator Remote

A USB gate operator remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car’s USB port and using it as a remote.

USB Gate Operator Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate.

Here’s a more detailed explanation:

-How it works:
USB Dongle:

The device typically includes a small USB dongle that plugs into your car’s USB port.

Sensing Signal:

When the USB is plugged in and the car is in the “on” mode, the dongle emits a sensing signal.

Receiver:

The signal is received by a unit connected to the driveway gate motor.

Gate Motor Activation:

The receiver then activates the gate motor, causing the driveway gate to open or close.

-Key features:
Dual Control Modes:
Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle.
Compact and Portable:
The USB dongle is small and lightweight, making it easy to use and store in your car.
Easy Installation:
It’s designed for simple plug-and-play functionality, requiring no complex setup.
Replacement Accessory:
It serves as a convenient replacement for traditional gate remote controls.

Compare
Add to wishlist
Category: Tags: , , , , ,
Description

USB Gate Operator Remote

A USB gate operator remote is a device that allows you to open and close your automatic driveway gates using your car’s USB port.
The USB gate openrator remote control typically consists of a USB transmitter that plugs into your car’s USB port and a receiver that is connected to your gate’s motor.
When your car is near the gate, the USB remote transmitter sends a signal to the receiver, which then automatically opens the driveway gate.
Here’s how it works:
  1. Plug and Play: You plug the USB transmitter into your car’s USB port. 
  2. Signal Transmission: The USB transmitter sends a signal when your car is near the gate, using either radio waves or Bluetooth. 
  3. Gate Activation: The receiver, connected to your gate motor, receives the signal and activates the electric gate to open or close. 
Key Features:
  • Automatic Mode: The gate opens automatically when the car is within range. 
  • Manual Mode: Some models offer a manual mode where you can open the gate with a button press. 
  • Easy Installation: Installation typically involves plugging the USB transmitter into the car’s USB port and connecting the receiver to the gate motor. 
  • Compatibility: These systems are often designed to work with various types of automatic gates, including swing and sliding gates. 
  • Durability: The devices are usually made of durable plastic for long-lasting use. 
USB Gate Opener Remote

USB Gate Opener Remote

Additional information
Weight 0.15 kg
Dimensions 21 × 15 × 5 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “USB Gate Operator Remote”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Exit Loop Car Detector
Compare

Exit Loop Car Detector

$94.25

Ship or pick up from our office.

Exit Loop Car Detector

Add to wishlist
Add to cart
Quick view
Compare

Underground Exit Wand Vehicle Detector

$187.30
Add to wishlist
Add to cart
Quick view
Gate Opener Infrared Remote
Compare

Gate Opener Infrared Remote

$147.70

Ship or pick up from our office.

Gate Opener Infrared Remote

An infrared remote for an automatic gate opener allows you to control your gate from a distance, while the infrared sensor provides safety by detecting obstacles and automatically reversing the gate's movement if an obstruction is encountered.
Here's a breakdown:
  • Infrared (IR) Remote:
    This is a standard remote control, similar to those used for televisions, that transmits a signal to the gate opener using infrared light. You press a button on the remote, and it sends a coded signal to the gate opener's receiver, which then activates the gate motor. 
  • Infrared (IR) Sensor:
    This sensor, often found near the gate, emits an infrared beam. If an object (like a person or car) breaks this beam while the gate is closing, the sensor detects the interruption and signals the gate opener to stop and potentially reverse its direction to prevent accidents. 
  • Auto-Open/Close Functionality:
    Many automatic gate openers also have an "auto-close" feature, allowing you to set a timer for the gate to automatically close after a certain period (e.g., 5, 10, or 20 seconds). This adds convenience by eliminating the need to manually close the gate. 
  • Remote Range:
    The range of the remote control can vary, but typical ranges are around 100 feet (30 meters). Some systems can handle a larger number of remote controls (e.g., up to 25). 
  • Safety and Security:
    The infrared sensor adds a layer of safety to your gate system. The automatic reversing feature helps prevent accidents and property damage. 
  • Other Features:
    Some automatic gate openers also include features like:
    • Manual release: Allows you to manually open and close the gate in case of power outages or other emergencies. 
    • Overheating protection: The motor may have a built-in protection mechanism to prevent overheating. 
    • Multiple control options: Some systems can also be controlled via a wireless keypad or even through a smartphone app. 
Add to wishlist
Add to cart
Quick view
USB Gate Opener Remote
Compare

USB Gate Opener Remote

$46.45

Ship or pick up from our office.

USB Gate Opener Remote

A USB gate opener remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car's USB port and using it as a remote.
USB Gate Opener Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. 
Here's a more detailed explanation:
How it works:
  • USB Gate Opener Remote Dongle:
    The device typically includes a small USB dongle that plugs into your car's USB port. 
  • Sensing Signal:
    When the USB is plugged in and the car is in the "on" mode, the dongle emits a sensing signal. 
  • Receiver:
    The signal is received by a unit connected to the driveway gate motor. 
  • Gate Motor Activation:
    The receiver then activates the gate motor, causing the driveway gate to open or close. 
Key features:
  • Dual Control Modes:
    Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle.
  • Compact and Portable:
    The USB dongle is small and lightweight, making it easy to use and store in your car.
  • Easy Installation:
    It's designed for simple plug-and-play functionality, requiring no complex setup.
  • Replacement Accessory:
    The USB gate opener remote serves as a convenient replacement for traditional gate remote controls. 
Add to wishlist
Add to cart
Quick view
Wifi gate opener
Compare

WiFi Gate/Door controller

$76.80
Add to wishlist
Add to cart
Quick view

Related products

Safety Sensor S300
Compare

Safety Sensor S300

$21.35

Ship or pick up from our office.

Safety Sensor S300

A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Safety Sensor - Key Automation 900FT33
Compare

Safety Sensor – Key Automation 900FT33

$176.60

Ship or pick up from our office.

Safety Sensor - Key Automation 900FT33

  • NO/NC
  • AC 10-30 V / DC 10-40 V
  • Receiving Range: 25 Meters
  • IP 54
The photocell safety sensor of the FT series are devices applicable to the automation of doors and gates, which allow to detection of the presence of obstacles along the route between transmitter and receiver. Compatible with sliding and swing gate operators. Best with Key RAY, STAR swing gate operator, and SUN, TURBO sliding gate operator. Watch a video of our previous project on our YouTube channel. The Key Automation 900FT33 is a photoelectric safety sensor designed for use with automated gates and doors. It acts as a safety feature by detecting obstacles in the path of the gate or door and preventing it from closing on them. It's typically used in conjunction with sliding and swing gate operators. 
Add to wishlist
Add to cart
Quick view
Smart Video Doorbell
Compare

Smart Video Doorbell

$169.35

Ship or pick up from our office.

Smart Video Doorbell

*WiFi connection *Android/IOS app on the smartphone *Answer visitors using smartphone worldwide
Add to wishlist
Add to cart
Quick view
Exit Button SQTPB801
Compare

Exit Button SQTPB801

$22.85

Ship or pick up from our office.

Exit Button SQTPB801

*Touch *Backlight *DC 12V *COM-NC-NO
An Exit push button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms. 
Here's a more detailed explanation:
  • Function:
    An exit push button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit. 
  • Purpose:
    They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available. 
  • Types:
    Exit push buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them. 
  • Importance:
    These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals. 
  • Applications:
    Exit push buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities. 
Add to wishlist
Add to cart
Quick view
Keypad Access Control V2000
Compare

Keypad Access Control K110V2000

$96.05

Keypad Access Control K110V2000

*Waterproof Version *EM - RFID card/tag reader *Finger Touch *Backlight *DC 12 V *1000 Users *Doorbell button *Rain Shield Cover Included
The Keypad Access Control K110V2000 is a standalone access control system designed for single-door access, typically used for residential or small-to-medium commercial buildings.
It allows users to unlock the door using either a proximity card, a PIN code, or a combination of both. 
Here's a more detailed breakdown:
Key Features:
  • Multiple User Capacity: It can support up to 1000 users. 
  • Multiple Access Methods: Users can unlock the door using RFID cards, PIN codes, or both. 
  • Standalone Operation: It functions independently, without needing to be connected to a central computer. 
  • Wiegand Input/Output: It can connect to an external card reader (Wiegand 26 input) and a controller (Wiegand 26 output). 
  • Tamper Alarm: Includes a tamper alarm for added security. 
  • Backlit Keypad: The keypad is backlit, making it easier to use in low-light conditions. 
  • Short Circuit Protection: The output is automatically turned off if there's a short circuit in the electric lock or alarm output. 
  • Waterproof: Some models, like the V2000-C, are waterproof, making them suitable for outdoor use. 
  • Easy Installation and Programming: The system is designed for straightforward installation and programming. 
  • Doorbell Input: Some models include a doorbell input. 
  • Adjustable Settings: Features like door output time, alarm time, and door open time can be adjusted. 
Applications:
  • Residential Buildings: Ideal for controlling access to apartments or individual homes.
  • Small to Medium Businesses: Suitable for offices, shops, and other commercial spaces.
  • Warehouses and Factories: Can be used to manage access to secure areas.
  • Other Applications: Laboratories, banks, and even prisons. 
Add to wishlist
Add to cart
Quick view
Wireless Keypad Access Control KW200
Compare

Wireless Keypad Access Control KW200

$127.80

Wireless Keypad Access Control KW200

*Backlight *433 MHz *Finger Touch *Rain cover
Wireless keypad access control systems replace traditional keys with a digital PIN code entry for building access, eliminating the need for physical keys and enhancing security.
These systems often include features like remote management via smart devices, audit trails of access events, and integration with other security systems like intercoms. 
Here's a more detailed breakdown:
Core Functionality:
  • Keyless Entry:
    Users enter a unique PIN code into a keypad to unlock a door or gate. 
  • Wireless Communication:
    The keypad communicates wirelessly with a receiver or controller, eliminating the need for extensive wiring. 
  • Remote Management:
    Many systems allow administrators to manage access permissions, view audit trails, and adjust settings remotely via a smartphone app or computer. 
  • Integration:
    Some systems can integrate with intercoms, surveillance cameras, and other security components for a more comprehensive solution. 
Key Features:
  • PIN Codes: Users are assigned unique PIN codes for entry. 
  • Proximity Cards/Fobs: Some systems also support access via proximity cards or fobs for users who prefer that method. 
  • Audit Trails: The system can record and store data about who accessed the door, when, and how, providing a valuable security record. 
  • Weatherproof and Durable: Many outdoor keypads are designed to withstand harsh weather conditions and vandalism. 
  • Backlit Keypads: Backlit keypads make it easier to use the system in low-light conditions. 
Types of Wireless Keypad Access Control:
  • Stand-Alone Systems: These systems are self-contained and don't require connection to a central system. 
  • Integrated Systems: These systems are part of a larger access control or building management system. 
  • Wired and Wireless Hybrid: Some systems combine wired and wireless components for added flexibility. 
Benefits:
  • Enhanced Security: Eliminates the risk of lost or stolen keys.
  • Increased Convenience: Users don't need to carry keys.
  • Improved Auditability: Tracks access events for security monitoring.
  • Remote Management: Allows for easy administration and control. 
Add to wishlist
Add to cart
Quick view
Hot
swing gate opener NICE Wingo 4024
Compare

Double Swing Gate Opener NICE -Wingo 4024

,
$1,363.45

Ship or pick up from our office.

Product Sheet PDF

Double Swing Gate Opener NICE -Wingo 4024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Operators are designed to fit a wide range of settings and applications. The Double Swing Gate Opener NICE - Wingo 4024 is an electromechanical gear motor system designed for automating double swing gates. It's primarily used for residential and light industrial applications, offering a convenient and secure way to open and close gates without manual effort. Here's a breakdown of its key features and specifications: Key Features
  • Electromechanical Gear Motor: It utilizes a 24 Vdc electromechanical gear motor, known for its reliability and quiet operation.
  • Suitable for Various Gate Sizes: It can handle swing gates with individual leaves up to 2 meters in length or up to 400 kg in weight (for a gate leaf of 1 meter).
  • Surface Mounted: The system is designed for surface mounting, meaning the motors are installed directly onto the gate posts or pillars.
  • Easy Installation: Electrical connections are made from above the gear motor, simplifying the installation process.
  • User-Friendly Release: In case of a power failure, the gate can be manually unblocked and moved with a personalized Nice key or standard lock (optional).
  • Moonclever Control Unit (MC424L/MC824H): This advanced control unit offers several intelligent functions:
    • Simple Programming: Easy setup with a single button.
    • Automatic Memorization: Self-learning function for limit switches on opening and closing.
    • Anti-Crush Safety: Features a clutch with an anti-crush safety device to prevent damage or injury.
    • Obstacle Detection: Uses dual technology to detect obstacles during operation.
    • Programmable Functions: Allows for programming of pause time, pedestrian pass door function, and deceleration at the beginning and end of cycles.
    • Battery Backup Option: Can operate during power failures with optional rechargeable batteries (PS124/PS324) that fit inside the control unit.
    • Resistive Sensitive Edge Connection: Can be connected to 8.2 KOhm resistive sensitive edges for enhanced safety.
  • Durable Construction: Features tough aluminum shells with polyester paint finish, making it resistant to atmospheric agents. Internal moving parts are made of steel, light alloys, and techno-polymers for durability.
  • Mechanical Limit Switches: Includes pre-assembled mechanical limit switches for setting the open position.
Add to wishlist
Add to cart
Quick view