Sliding gate operator limit sensor -Spring
Click to enlarge
Solar charge controller
Solar charge controller $55.10
Back to products
Remote starter immobilizer bypass module
Remote starter immobilizer bypass module $88.75

Sliding gate operators limit sensor -Spring

$86.10

Ship or pick up from our office.

Sliding gate operator limit sensor -Spring

A sliding gate operator limit sensor with a spring mechanism (also known as a mechanical limit switch or spring limit switch) is a common type of sensor used in automatic sliding gate systems to define the gate’s fully open and fully closed positions.

Here’s how it works and what its characteristics are:

Purpose of a Limit Sensor:

For any automatic gate operator, the system needs to know exactly when the gate has reached its desired open and closed positions. This is crucial for:

  • Stopping the Motor: Preventing the motor from continuing to run once the gate has reached its limit, which would otherwise cause damage to the gate, the motor, or the track.
  • Safety: Ensuring the gate stops precisely where it should, preventing it from hitting obstacles or over-extending.
  • Proper Operation: Allowing for features like auto-closing, pedestrian mode, and proper synchronization if it’s a dual-gate system.

How the Spring Mechanism Works:

  1. Components: A spring limit switch typically consists of:
    • A microswitch (an electrical switch that requires very little force to operate).
    • A spring-loaded lever, arm, or plunger connected to the microswitch.
    • A mounting bracket to attach it to the gate operator or gate frame.
  2. Mounting: The spring limit switch is usually positioned on the gate operator itself, or on a bracket near the motor.
  3. Interaction with the Gate:
    • On the sliding gate itself, usually along the gear rack or a specific part of the gate frame, two small “stop” tabs or flags are installed – one for the open limit and one for the close limit.
    • As the gate moves towards its fully open or fully closed position, one of these tabs/flags will physically contact and push against the spring-loaded lever/plunger of the limit switch.
    • This physical contact compresses the spring and activates the microswitch.
  4. Signal to Control Board: When the microswitch is activated, it sends an electrical signal to the gate operator’s main control board.
  5. Motor Stop: Upon receiving this signal, the control board immediately cuts power to the motor, stopping the gate precisely at that determined limit.

Key Characteristics and Considerations:

  • Physical Contact: The defining feature is that it relies on direct physical contact and force to activate the switch.
  • Reliability: Generally reliable as they are a simple mechanical system.
  • Durability: Made to withstand repeated physical contact. However, over time, the spring can wear out, lose tension, or the switch itself can be damaged by repeated impacts or debris.
  • Adjustability: The position of the “stop” tabs on the gate can be adjusted to fine-tune the exact open and closed positions of the gate.
  • Maintenance: May require periodic checks to ensure the spring is intact, the switch is clean, and the “stop” tabs are securely in place and correctly positioned. They can be susceptible to damage from impacts (e.g., if a child’s toy or a pet gets in the way of the stop tab).
  • Compared to Magnetic Limit Switches:
    • Magnetic Limit Switches: These are more common in newer and higher-end gate operators (like many BFT Deimos “Ultra” models). They use magnets attached to the gate and magnetic sensors (reed switches or Hall effect sensors) on the operator. They offer a “contactless” operation, which generally leads to less wear and tear, greater precision, and less susceptibility to environmental debris or physical impact damage.
    • Spring/Mechanical Limit Switches: Are typically more cost-effective and simpler in design. They are still widely used, especially in more budget-friendly or older gate operator models.

Where you’d find them:

You would find spring mechanism limit sensors on many brands and models of sliding gate operators, particularly those that use a gear rack system. When looking for replacement parts or considering a new gate operator in Vancouver, BC, it’s important to identify whether the system uses mechanical (spring) or magnetic limit switches, as they are not interchangeable. Suppliers like Royal Gates (Royal Electronic Technology Center Co.) would carry these as spare parts for compatible gate operators.

Compare
Add to wishlist
Category: Tags: , , , , , , , , ,
Description

Sliding gate operators limit sensor -Spring

A sliding gate operator’s spring limit mechanism uses a spring-loaded switch to control the gate’s movement. When the gate reaches its fully open or closed position, the spring is compressed, triggering the switch to cut power to the motor and stop the gate’s movement. This mechanism relies on physical contact and force exerted by the gate on the spring, unlike magnetic limit switches, which use magnets and sensors. 

How it works:
  • Spring and Switch:

    The system includes a spring and a limit switch. The spring is typically mounted on a bracket or lever. 

  • Gate Contact:

    As the gate moves, it pushes against the spring, compressing it. 

  • Switch Activation:

    Once the gate reaches its limit (fully open or closed), the compressed spring activates the limit switch. 

  • Motor Stop:

    The activated switch sends a signal to the gate operator’s control board, which then stops the motor. 

Key Features:
  • Physical Mechanism: The spring mechanism is a physical, contact-based system. 
  • Reliability: It provides a reliable way to define the gate’s travel limits. 
  • Maintenance: Regular checks are needed to ensure the spring and switch are functioning correctly. 
Advantages:
  • Simplicity: The spring mechanism is relatively simple and easy to understand. 
  • Cost-Effective: It can be a more affordable option compared to some other limit switch systems. 
Disadvantages:
  • Durability:

    The spring and switch mechanism can be more susceptible to wear and tear over time compared to magnetic systems. 

  • Sensitivity:

    It can be more sensitive to impacts or obstructions, potentially leading to damage or misalignment. 

  • Maintenance:

    It may require more frequent adjustments or replacements compared to magnetic systems. 

In comparison to magnetic limit switches:
  • Magnetic Limit Switches:
    Use magnets and reed switches to detect gate position, offering greater reliability and smoother operation.
  • Spring Limit Switches:
    Rely on physical contact and force, which can be more prone to wear and tear.
Additional information
Weight 0.15 kg
Dimensions 10 × 10 × 6 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Sliding gate operators limit sensor -Spring”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Sliding gate operator limit stopper bracket
Compare

Sliding gate operator limit stopper bracket

$48.60

Ship or pick up from our office.

Sliding gate operator limit stopper bracket

The gate operator system with a damaged limit stopper bracket can not work properly, and it will soon stop working. Most of the time, the main control board and the motor will be damaged because of this issue and have to be replaced. Sometimes errors come from the limit stopper bracket not working because they are damaged and needs only to be cleaned or readjustment.
A sliding gate operator limit stopper bracket is a component that works with limit switches to prevent a sliding gate from over-extending its travel, ensuring it stops at the desired open and closed positions.
These brackets typically hold magnets or other sensor components that interact with the limit switches on the gate operator's control board. They help maintain the gate's smooth and safe operation by preventing it from hitting obstructions or going off its track. 
Here's a more detailed explanation:
  • Purpose:
    The primary function of the limit stopper bracket is to define the boundaries of the gate's movement. It ensures the gate stops at the fully open and fully closed positions, preventing it from over-traveling. 
  • How it works:
    The bracket holds a magnetic or other type of sensor that is triggered when the gate reaches its limit. This trigger sends a signal to the gate operator's control board, which then stops the motor. 
  • Components:
    • Bracket: The physical structure that holds the sensor. 
    • Sensor: A device (often a magnet) that interacts with the limit switch. 
    • Limit Switch: A switch on the gate operator's control board that is activated by the sensor. 
  • Importance:
    • Safety: Prevents the gate from hitting objects or going off track, reducing the risk of damage or injury. 
    • Reliability: Ensures consistent and reliable gate operation by defining the travel limits. 
    • Protection: Protects the gate, operator, and surrounding objects from damage due to over-travel. 
Add to wishlist
Add to cart
Quick view
Micro Limit Switch
Compare

Micro Limit Switch

$24.30
Micro Limit Switch *NC/NO *2 Amp A micro limit switch, also known as a micro switch, is a small, electromechanical switch
Add to wishlist
Add to cart
Quick view
Sliding gate operator limit sensor -Spring
Compare

Sliding gate operator limit sensor -Spring

$62.00

Ship or pick up from our office.

Sliding gate operator limit sensor -Spring

A sliding gate operator limit sensor with a spring mechanism (also known as a mechanical limit switch or spring limit switch) is a common type of sensor used in automatic sliding gate systems to define the gate's fully open and fully closed positions. Here's how it works and what its characteristics are: Purpose of a Limit Sensor: For any automatic gate operator, the system needs to know exactly when the gate has reached its desired open and closed positions. This is crucial for:
  • Stopping the Motor: Preventing the motor from continuing to run once the gate has reached its limit, which would otherwise cause damage to the gate, the motor, or the track.
  • Safety: Ensuring the gate stops precisely where it should, preventing it from hitting obstacles or over-extending.
  • Proper Operation: Allowing for features like auto-closing, pedestrian mode, and proper synchronization if it's a dual-gate system.
How the Spring Mechanism Works:
  1. Components: A spring limit switch typically consists of:
    • A microswitch (an electrical switch that requires very little force to operate).
    • A spring-loaded lever, arm, or plunger connected to the microswitch.
    • A mounting bracket to attach it to the gate operator or gate frame.
  2. Mounting: The spring limit switch is usually positioned on the gate operator itself, or on a bracket near the motor.
  3. Interaction with the Gate:
    • On the sliding gate itself, usually along the gear rack or a specific part of the gate frame, two small "stop" tabs or flags are installed – one for the open limit and one for the close limit.
    • As the gate moves towards its fully open or fully closed position, one of these tabs/flags will physically contact and push against the spring-loaded lever/plunger of the limit switch.
    • This physical contact compresses the spring and activates the microswitch.
  4. Signal to Control Board: When the microswitch is activated, it sends an electrical signal to the gate operator's main control board.
  5. Motor Stop: Upon receiving this signal, the control board immediately cuts power to the motor, stopping the gate precisely at that determined limit.
Key Characteristics and Considerations:
  • Physical Contact: The defining feature is that it relies on direct physical contact and force to activate the switch.
  • Reliability: Generally reliable as they are a simple mechanical system.
  • Durability: Made to withstand repeated physical contact. However, over time, the spring can wear out, lose tension, or the switch itself can be damaged by repeated impacts or debris.
  • Adjustability: The position of the "stop" tabs on the gate can be adjusted to fine-tune the exact open and closed positions of the gate.
  • Maintenance: May require periodic checks to ensure the spring is intact, the switch is clean, and the "stop" tabs are securely in place and correctly positioned. They can be susceptible to damage from impacts (e.g., if a child's toy or a pet gets in the way of the stop tab).
  • Compared to Magnetic Limit Switches:
    • Magnetic Limit Switches: These are more common in newer and higher-end gate operators (like many BFT Deimos "Ultra" models). They use magnets attached to the gate and magnetic sensors (reed switches or Hall effect sensors) on the operator. They offer a "contactless" operation, which generally leads to less wear and tear, greater precision, and less susceptibility to environmental debris or physical impact damage.
    • Spring/Mechanical Limit Switches: Are typically more cost-effective and simpler in design. They are still widely used, especially in more budget-friendly or older gate operator models.
Where you'd find them: You would find spring mechanism limit sensors on many brands and models of sliding gate operators, particularly those that use a gear rack system. When looking for replacement parts or considering a new gate operator in Vancouver, BC, it's important to identify whether the system uses mechanical (spring) or magnetic limit switches, as they are not interchangeable. Suppliers like Royal Gates (Royal Electronic Technology Center Co.) would carry these as spare parts for compatible gate operators.
Add to wishlist
Add to cart
Quick view
Sliding gate operator limit stopper bracket
Compare

Sliding gate operator limit stopper bracket

$37.80

Ship or pick up from our office.

Sliding gate operator limit stopper bracket

The gate operator system with a damaged limit stopper bracket can not work properly, and it will soon stop working. Most of the time, the main control board and the motor will be damaged because of this issue and have to be replaced. Sometimes errors come from the limit stopper bracket not working because they are damaged and needs only to be cleaned or readjustment. A sliding gate operator limit stopper bracket is a component that works with limit switches to prevent a sliding gate from over-extending its travel, ensuring it stops at the desired open and closed positions. These limit stopper brackets typically hold magnets or other sensor components that interact with the limit switches on the gate operator's control board. They help maintain the gate's smooth and safe operation by preventing it from hitting obstructions or going off its track. Here's a more detailed explanation: Purpose: The primary function of the limit stopper bracket is to define the boundaries of the gate's movement. It ensures the gate stops at the fully open and fully closed positions, preventing it from over-traveling. How it works: The bracket holds a magnetic or other type of sensor that is triggered when the gate reaches its limit. This trigger sends a signal to the gate operator's control board, which then stops the motor. Components: Bracket: The physical structure that holds the sensor. Sensor: A device (often a magnet) that interacts with the limit switch. Limit Switch: A switch on the gate operator's control board that is activated by the sensor. Importance: Safety: Prevents the gate from hitting objects or going off track, reducing the risk of damage or injury. Reliability: Ensures consistent and reliable gate operation by defining the travel limits. Protection: Protects the gate, operator, and surrounding objects from damage due to over-travel.
Add to wishlist
Add to cart
Quick view

Related products

Exit Button SQTPB801
Compare

Exit Button SQTPB801

$22.85

Ship or pick up from our office.

Exit Button SQTPB801

*Touch *Backlight *DC 12V *COM-NC-NO
An Exit push button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms. 
Here's a more detailed explanation:
  • Function:
    An exit push button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit. 
  • Purpose:
    They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available. 
  • Types:
    Exit push buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them. 
  • Importance:
    These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals. 
  • Applications:
    Exit push buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities. 
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS EGO110
Compare

Double swing gate opener –VDS EGO110

,
$1,181.30

Ship or pick up from our office.

Product Sheet PDF

Double swing gate opener –VDS EGO110

More information about the swing gate openers: WHAT ARE THE DIFFERENT TYPES OF SWING GATE MOTORS? 1- Articulated Arm for Swing Gate Operators How do automatic gates work with articulated swing gate motors? An articulated arm electric gate opener uses a two-part arm with an ‘elbow’ joint to connect the motor to the gate. This arm protrudes from the gate motor body, so there has to be room for the arm to move as the driveway gate opens and closes. This type of electric gate opener is easier to install than other types, thanks to the geometry of the arm system. They can be slightly more expensive than other gate motors, but they open and close automated gates quickly. Many homeowners like discrete gate automation systems, and articulated arm motors can be more obvious when installed. However, many have the control system built into one of the motors. These motors for automatic gates are mounted on the inside of gates so they’re not seen from the outside of closed gates. In the event of power failure or mechanical breakdown, articulated arm motors can normally be released manually from outside the gate with an optional cable release system. All articulated arm gate operators are electric gate motors that can be either 120VAC or 24VDC. All 24V and some 120V versions have obstacle detection. This means that the gates stop moving and some even reverse when they come into contact with an object during operation. Articulated arm gate automation systems can be the best choice where each electric gate opener is mounted on a large gate pier or pillar. 2- Ram And Linear Screw Automatic Swing Gate Openers Ram gate automation motors push and pull a piston mounted on the gate. Linear screw electric motors for gates use an electric motor to rotate the gate mounting along a threaded shaft. Both types of electric gate motors are slim and don’t need a lot of space to operate. However, this advantage does mean that they require careful alignment during installation. Manual release systems are only available from inside the driveway gate. A ram or linear screw type of motor for automatic gate control is attached to the gate at one end and the gate pillar or post at the other end. Ram motors can be hydraulic or driven by electric motors, but all require a separate control box. As with articulated arm motors, 120Vac, and 24Vdc, you can buy versions with obstacle detection for safer operation. Additionally, heavy-duty versions of each type of electric gate opener are available that will operate larger gates with leaves up to 7m long. These electric gate openers can be the best gate automation solution when price is important. Their simpler design and operation can make them a cost-effective solution compared to other types of electric gate motors. 3- Underground Swing Gate Operators Many Canadian homeowners choose underground gate automation motors because they are very discreet. This is because each underground gate opener is hidden under the hinge end of each swing gate. But how do automatic gates work when they’re opened and closed by hidden underground motors? During installation, a carefully positioned hole must be dug to house a foundation box for each underground gate opener. The housing for each underground electric gate motor needs sufficient drainage to prevent the motors from sitting in water, or they will fail. Underground electric gate motors don’t need a lot of space to operate and can be installed on the inside or back of gate pillars. They are usually only installed behind gate pillars when the gates must open more than 90 degrees, so that the post or pillar does not obstruct the gates. With the addition of a 180-degree gate opener, your gates can open much wider than 90 degrees. This is an optional chain drive system for driveways that bend around behind the gate pillars. If the gate only opened to 90 degrees, it could block part of the driveway. But a 180-degree gate opener system means that it can keep going past 90 degrees, so it doesn’t block the driveway. Normally, underground automation of gates is the most expensive solution, but they are almost invisible. It is possible for the most powerful underground gate opener to open and close a swing gate up to 5m long. Underground motors for automatic gates can be manually released from outside the gate. These types of gate motors can be either hydraulic or electromechanical. A separate control box is required, and 120VAC and 24VDC versions with obstacle detection are available. Underground gate opener installation is not simple, and it should always be installed by professional electric gate engineers. Underground gate automation could be the best style for you if you want a discreet, almost invisible electric gate motor installation and you have the budget for this more expensive option.
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS MP110
Compare

Dual swing gate opener -VDS MP110

,
$1,230.35

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener -VDS MP110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view
Safety sensor VDS-TEC2
Compare

Safety sensor VDS-TEC2

$88.30

Ship or pick up from our office.

Safety sensor VDS-TEC2

Technical Details:
  • NO/NC
  • AC/DC 12-24 V
  • Receiving Range: 15 Meters
  • IP 44
Universal light with barriers for any door design automation. The range can be reduced to 30% in bad weather conditions: fog, rain, dust, etc. Compatible with all models of gate openers, such as single swing, double swing, and sliding gates. When someone passes the infrared region, the detector will send an alarm signal to the control board(which is not included).
  • Compact
  • Lightweight
  • Portable
  • Easy to use
Safety sensor VDS-TEC2 works with our SIMPLY sliding gate operator or EGO swing gate opener, and all different sliding gate openers and swing gate operator brands.
Add to wishlist
Add to cart
Quick view
Sold out
Smart Video Doorbell
Compare

Smart Video Doorbell

$169.35

Ship or pick up from our office.

Smart Video Doorbell

*WiFi connection *Android/IOS app on the smartphone *Answer visitors using smartphone worldwide
Add to wishlist
Read more
Quick view
Hot
Swing gate opener -VDS Articulated
Compare

Dual Swing Gate Opener -VDS Articulated

,
$1,442.80

Ship or pick up from our office.

Product Sheet PDF

Dual Swing Gate Opener -VDS Articulated

*Suitable gate weight: Maximum 800 Kg (Per leaf) Included: *2 x Electromechanical articulated arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Safety sensor *2 x Manual release key
A swing gate opener is a device that automates the opening and closing of a swing gate, typically using a motor and a control system.
It provides a convenient and secure way to control access to a property, whether residential, commercial, or industrial. These openers can be used with various gate types, including those that swing inward or outward. 
AC DIY Double Swing Gate Automation kit (GTR058) - Richmond ...
Here's a more detailed explanation:
How it works:
  • Motor:
    A motor, powered by electricity (AC or DC), provides the force to move the gate. 
  • Control System:
    A control board receives signals from a remote control, keypad, or other access control system and activates the motor accordingly. 
  • Opening Mechanism:
    Depending on the type of swing gate opener, the mechanism can be a linear arm, an articulated arm, or an underground system. 
  • Safety Features:
    Many swing gate openers include safety features like obstruction detection, which stops the gate if it encounters an obstacle during opening or closing. 
  • Emergency Release:
    An emergency release mechanism allows manual operation of the gate in case of power failure. 
Types of Swing Gate Openers:
  • Linear Arm: These are the most common type, using a linear actuator to push or pull the gate. 
  • Articulated Arm: These use a hinged arm to move the gate, reducing strain on the hinges. 
  • Underground: The motor and mechanism are installed underground, providing a more discreet appearance. 
  • Dual Swing: These openers are designed for gates that swing open from the center. 
Benefits of using a swing gate opener:
  • Convenience: Automatic opening and closing of the gate with the press of a button or remote control.
  • Security: Prevents unauthorized access to the property.
  • Enhanced Property Value: Adds a layer of sophistication and security to the property.
  • Accessibility: Can be particularly useful for people with mobility issues. 
Add to wishlist
Add to cart
Quick view
Keypad Access Control V2000
Compare

Keypad Access Control K110V2000

$96.05

Keypad Access Control K110V2000

The Keypad Access Control K110V2000 is a standalone access control system designed for single-door access, typically used for residential or small-to-medium commercial buildings.
It allows users to unlock the door using either a proximity card, a PIN code, or a combination of both. 
Here's a more detailed breakdown:
Key Features:
  • Multiple User Capacity: It can support up to 1000 users. 
  • Multiple Access Methods: Users can unlock the door using RFID cards, PIN codes, or both. 
  • Standalone Operation: It functions independently, without needing to be connected to a central computer. 
  • Wiegand Input/Output: It can connect to an external card reader (Wiegand 26 input) and a controller (Wiegand 26 output). 
  • Tamper Alarm: Includes a tamper alarm for added security. 
  • Backlit Keypad: The keypad is backlit, making it easier to use in low-light conditions. 
  • Short Circuit Protection: The output is automatically turned off if there's a short circuit in the electric lock or alarm output. 
  • Waterproof: Some models, like the V2000-C, are waterproof, making them suitable for outdoor use. 
  • Easy Installation and Programming: The system is designed for straightforward installation and programming. 
  • Doorbell Input: Some models include a doorbell input. 
  • Adjustable Settings: Features like door output time, alarm time, and door open time can be adjusted. 
Applications:
  • Residential Buildings: Ideal for controlling access to apartments or individual homes.
  • Small to Medium Businesses: Suitable for offices, shops, and other commercial spaces.
  • Warehouses and Factories: Can be used to manage access to secure areas.
  • Other Applications: Laboratories, banks, and even prisons. 
Add to wishlist
Add to cart
Quick view
Reflective safety sensor PQ58
Compare

Reflective safety sensor PQ58

$116.80

Ship or pick up from our office.

Add to wishlist
Add to cart
Quick view