Sold out
Sliding gate opener – Royalgate RGSLC800
Click to enlarge
Sliding gate operator chain
Sliding gate operator chain $94.95
Back to products
Radio receiver RG315-24V2C
Radio receiver RG315-24V2C $36.15

Sliding gate opener – Royalgate RGSLC800

$515.80

Ship or pick up from our office.

Sliding gate opener – Royalgate RGSLC800

*Suitable gate weight: Maximum 800 Kg

Included:

1 x Electromechanical motor

1 x Main control board

6 Meters of Chain (20 feet)

2 x Manual release key

2 x Remote control

Out of stock

Compare
Add to wishlist
Categories: , Tags: , , , , , , , , , , , ,
Description

Sliding gate opener – Royalgate RGSLC800

A sliding gate opener’s “chain link” refers to the drive chain, a roller chain that connects the gate operator to the gate itself, enabling the gate to slide open and closed. This chain is a crucial component in automated sliding gate systems, transmitting the motor’s power to move the gate. 

Here’s a more detailed explanation:
  • Drive Chain:

    The chain is a type of roller chain, similar to those used in bicycles, but designed for the heavier loads and specific requirements of gate automation. 

  • Connection:

    It acts as the link between the gate operator’s motor and the gate, transferring the rotational motion of the motor to linear motion that moves the gate. 

  • Purpose:

    The chain allows the gate to slide smoothly and reliably along a track (if applicable) or operate as a cantilever gate. 

  • Types:

    While #41 and #40 chains are common for gate operators, larger sizes like #50 and #60 are used for heavier or industrial applications. 

  • Maintenance:

    Regular maintenance, including lubrication and occasional replacement, is necessary to ensure the chain functions correctly and to prevent issues like stretching or wear. 

  • Safety:

    Chains are often paired with safety features like limit switches to stop the gate’s movement when it reaches its fully open or closed position. 

  • Installation:

    Chain drive gate openers can be installed on various gate types, including chain link gates and other sliding gate designs. 

  • Accessories:
    Various components like master links (for connecting sections of chain), chain tensioners (to adjust slack), and chain stop brackets (to limit travel) are also available.

Additional information
Weight 16.3 kg
Dimensions 28 × 28 × 45 cm
Maximum gate weight

Maximum 800 Kg
IN/M

IN:120/M:120
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Sliding gate opener – Royalgate RGSLC800”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Sliding gate V-Groove wheels - SLGWSS400
Compare

Sliding gate V-Groove wheels – SLGWSS400

$13.95

Ship or pick up from our office.

Sliding gate V-Groove wheels - SLGWSS400

*Heavy-duty *Steel material *Single bearing *Max 400 Kg *98 mm Diameter x 32 mm Width *Heavy-duty bolts, nuts, and washers are included
Sliding gate V-groove wheels are designed to roll along a V-shaped track, providing a guided and stable rolling surface for sliding gates.
These wheels are crucial for the smooth operation of sliding gates, especially those made of metal or used in industrial settings. The V-groove design minimizes friction, reduces noise and vibration, and ensures the gate remains aligned with its track. 
Here's a more detailed explanation:
  • Function:
    V-groove wheels are specifically designed to roll along a V-shaped track, which can be made of angle iron or other suitable materials. This design provides guidance and support for the gate, preventing it from deviating from its intended path. 
  • Benefits:
    The V-groove design offers several advantages:
    • Reduced Friction: The angled surface of the groove allows the wheel to roll smoothly, minimizing friction and making it easier to open and close the gate. 
    • Noise Reduction: The smooth rolling action reduces noise and vibration compared to other wheel designs. 
    • Stability: The V-groove ensures the gate remains aligned with the track, preventing it from wobbling or derailing. 
    • Load Capacity: V-groove wheels are often designed with heavy-duty construction to handle substantial weight, making them suitable for various gate sizes and materials. 
  • Materials:
    V-groove wheels are available in different materials, including:
    • Nylon: Offers good wear resistance, low friction, and resistance to various environmental conditions. 
    • Steel: Provides strength and durability, suitable for heavy-duty applications. 
    • Cast Iron: Another durable option, often used for industrial applications. 
  • Applications:
    V-groove wheels are used in a wide range of sliding gate applications, including:
    • Residential Gates: For driveways and other entryways. 
    • Commercial Gates: In businesses and industrial settings. 
    • Industrial Doors: In factories and warehouses.
Add to wishlist
Add to cart
Quick view
Sliding gate V-Groove nylon wheels SLGWN778MLB
Compare

Sliding gate V-Groove nylon wheels -SLGWN778MLB

$14.85

Ship or pick up from our office.

Sliding gate V-Groove nylon wheels -SLGWN778MLB

*Double bearing *Max 250 Kg *4" Diameter x 1-3/4" Width (Heavy-duty bolts, nuts, and washers are included)
Add to wishlist
Add to cart
Quick view
Sliding gate V-Groove nylon wheels -SLGWNS250
Compare

Sliding gate V-Groove nylon wheels -SLGWNS250

$9.95

Ship or pick up from our office.

Sliding gate V-Groove nylon wheels -SLGWNS250

*Double bearing *Max 250 Kg *98 mm Diameter (4") x 44 mm Width (1-3/4") (Heavy-duty bolts, nuts, and washers are included)
Add to wishlist
Add to cart
Quick view
Keypad - K180SC103
Compare

Keypad – K180SC103

$107.25

Ship or pick up from our office.

Keypad - K180SC103

*EM/ID card/tag reader *Shock resistance *Anti-vandal Metal shell *Backlight *1000 Users *DC 12 V *IP 67 *Doorbell *Rain Shield Cover included   The Keypad - K180SC103 is an access control keypad typically used for security systems, gate openers, or door entry systems. 🔑 It's designed to allow access by entering a digital code. Here's what we know about it: Functionality:
  • Code-Based Access: The primary function is to grant access when a correct digital code is entered.
  • Security System Integration: It's likely part of a larger access control system, where it sends signals to a control panel or hub to manage entry.
  • Applications: Commonly found in residential or commercial settings for controlling gates, garage doors, and electronic door locks.
  • Relay Output: It features a relay output with a maximum contact of 15A/120VAC & 10A/30VDC, offering two modes: toggle click and self-hold. This allows it to control various devices, including lights, automatic feeders, and water pumps.
Features:
  • Weatherproof (IP44): This rating suggests it can withstand certain outdoor conditions, making it suitable for gate or outdoor door applications.
  • Timer Function: In self-hold mode, you can set a timer to adjust the working time of the connected device.
  • Dimensions: Approximately 24 × 18 × 12 cm.
  • Weight: Around 0.8 kg.
Add to wishlist
Add to cart
Quick view
Sold out
Sliding gate operator chain
Compare

Sliding gate operator chain

$94.95

Ship or pick up from our office.

Sliding gate operator chain

*Length: 10 Feet
A sliding gate operator chain is a specialized type of chain used in automated sliding gates to connect the gate to the motor, enabling the gate to open and close smoothly.
It acts as the mechanical link between the motor's drive system and the gate, facilitating the gate's horizontal movement along a track. 
Add to wishlist
Read more
Quick view

Related products

Underground Swing Gate Opener -VDS RG110
Compare

Underground Dual Swing Gate Opener -VDS RG110

,
$2,103.60

Ship or pick up from our office.

Product Sheet PDF

Underground Dual Swing Gate Opener -VDS RG110

*Suitable gate weight: Maximum 500 Kg (Per leaf) Included: *2 x Electromechanical motor *2 x Foundation box *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor The swing gate opener -VDS Underground RG110 is one of the best underground swing gate operators that can be installed for the swing driveway gates. The swing gate opener -VDS Underground RG110 is Italian-made and can be installed for heavy swing gates. *Electromechanical Motor *Maximum gate weight: 500 Kg *120 V
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS EGO110
Compare

Single swing gate opener –VDS EGO110

,
$829.25

Ship or pick up from our office.

Product Sheet PDF

Single swing gate opener –VDS EGO110

*Suitable gate weight: Maximum 200 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key The VDS EGO110 is a model of single swing gate opener manufactured by VDS Automation. It is an electromechanical operator designed to automate swing gates. Here's a breakdown of its key characteristics and features:
  • Type: Linear screw electromechanical operator. This means it uses an electric motor to rotate a threaded shaft, which in turn pushes or pulls the gate.
  • Gate Compatibility:
    • Suitable for single swing gates.
    • Maximum gate leaf length: Up to 3 meters (some variations might support up to 2.5 meters).
    • Maximum gate weight: Up to 200 kg per leaf.
  • Construction:
    • Sturdy aluminum structure.
    • Stainless steel rod (with a typical stroke of 400mm).
    • Parts lubricated with lithium grease for protection against corrosion, oxidation, and rust.
  • Performance:
    • Quiet operation (typically < 30 dBA noise level).
    • High-performance electric motor.
    • Opening angle: Up to 120°.
    • Opening time: Around 20-25 seconds.
    • Thrust: 2000N.
    • Available in 120VAC and 24VDC versions. The 24VDC versions are often described as "intensive use" with higher frequency of use (90%) compared to 230VAC (50%).
  • Safety Features:
    • Anti-squashing system (compliant with EN 12453 standards).
    • Slowing down function.
    • Thermal cutout at 140° (for motor protection).
    • Obstacle detection (especially in 24V and some 120V versions).
  • Installation & Convenience:
    • Quick installation with multi-position brackets and a cover for brackets in technopolymer.
    • Manual release with a key for operation during power outages.
    • Optional limit switches.
    • Optional battery backup kit (for 24V models).
    • Often comes with a control unit (sometimes with a built-in receiver).
In essence, the single swing gate opener –VDS EGO110 is a robust and reliable electromechanical opener designed for automating residential and some commercial swing gates, focusing on durability, quiet operation, and safety features.
Add to wishlist
Add to cart
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Manual release key *1 x Safety sensor
A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view
Swing gate opener -Royalgate RGSW650
Compare

Single swing gate opener -Royalgate RGSW650

,
$453.35

Ship or pick up from our office.

Single swing gate opener -Royalgate RGSW650

*Suitable gate weight: Maximum 100 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS Articulated
Compare

Single swing gate opener -VDS Articulated

,
$1,012.30

Ship or pick up from our office.

Product Sheet PDF

Single swing gate opener -VDS Articulated

*Suitable gate weight: Maximum 800 Kg Included: *1 x Electromechanical articulated arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
Add to wishlist
Add to cart
Quick view
Hot
swing gate opener –HiGate HGSW950
Compare

Single swing gate opener –HiGate HGSW950

,
$698.50

Ship or pick up from our office.

Single swing gate opener –HiGate HGSW950

*Suitable gate weight: Maximum 200 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
Add to wishlist
Add to cart
Quick view
Hot
swing gate opener NICE Wingo 4024
Compare

Single swing gate opener – NICE Wingo 4024

,
$956.75

Ship or pick up from our office.

Product Sheet PDF

Single swing gate opener – NICE Wingo 4024

*Suitable gate weight: Maximum 400 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Openers are designed to fit a wide range of settings and applications. The NICE Wingo 4024 is a popular electromechanical swing gate opener designed for automating residential and light industrial swing gates. It's known for its reliability, quiet operation, and ease of installation. Here's a breakdown of its key features and specifications: Key Features:
  • Suitable for a range of gates: It's typically designed for swing gates with leaves up to 2 meters (approximately 6.5 feet) in length and weighing up to 400 kg (approximately 880 lbs). Some sources also mention it being suitable for gates up to 3m, but 2m is more commonly cited.
  • 24 Vdc electromechanical gear motor: This provides efficient and relatively quiet operation.
  • Reliable and Silent: Thanks to a patented layout of its internal components, it has fewer moving parts, contributing to its durability and quiet performance.
  • Easy Installation: Electrical connections are made from above after the gear motor is assembled, simplifying the installation process. It also comes with pre-assembled travel stops for opening.
  • User-friendly release: In case of power failure, it features a convenient manual release mechanism, often with a personalized Nice key or a standard lock (optional).
  • Moonclever control unit (MC424/MC424L): This advanced control unit offers:
    • Simple programming via a single key.
    • Automatic memorization of limit switches for opening and closing with a self-learning function.
    • Anti-crush safety feature (clutch).
    • Automatic fault diagnostics.
    • Adjustable pause time.
    • Pedestrian pass-door function (partial opening).
    • Soft stop/start (deceleration) for smooth operation.
    • Obstacle detection with dual technology.
    • Compatibility with 8.2 KOhm resistive sensitive edges for enhanced safety.
    • Option for uninterrupted operation with rechargeable batteries (PS124/PS324) in case of power failure.
    • Compatibility with the Solemyo solar power system for off-grid installations.
  • Surface-mounted: It's designed to be mounted on the surface of the gate post.
  • Durable construction: Features tough aluminum shells with a polyester paint finish to resist atmospheric agents.
Technical Specifications (Typical):
  • Power Supply: 24 Vdc
  • Absorption: 3.5 A
  • Power: 85 W
  • Speed: 0.018 m/s
  • Force: 1500 N
  • Work Cycle: 30 cycles/hour
  • Protection Level (IP): 44 (protected against solid objects larger than 1mm and splashing water from any direction)
  • Working Temperature: -20°C to +50°C
  • Dimensions (mm): 770x98x95 (h)
  • Weight (kg): Approximately 6 kg per motor (a kit with two motors would be around 17 kg total)
The NICE Wingo 4024 is often sold as a "kit" (WingoKit 4024) which usually includes two gear motors, a control unit, remote controls, photocells (for safety), a flashing light, and other mounting hardware.
Add to wishlist
Add to cart
Quick view
swing gate opener -VDS Underground RG110
Compare

Single swing gate opener -VDS Underground RG110

,
$1,474.85

Ship or pick up from our office.

Product Sheet PDF

Single swing gate opener -VDS Underground RG110

*Suitable gate weight: Maximum 500 Kg Included: *1 x Electromechanical motor *1 x Foundation box *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
Add to wishlist
Add to cart
Quick view