Sliding gate opener
Click to enlarge
Solar charge controller
Solar charge controller $55.10
Back to products
Remote starter immobilizer bypass module
Remote starter immobilizer bypass module $88.75

Sliding gate opener -Royalgate RGSL0.5TN24

$592.10

Ship or pick up from our office.

Sliding gate opener -Royalgate RGSL0.5TN24

*Suitable gate weight: Maximum 500 Kg

Included:
*1 x DC 24 Volts Electromechanical motor
*1 x Main control board
*4 Meters x SLGR41 Gear rack
*2 x Remote control
*2 x Manual release key

The Royalgate RGSL0.5TN24 is a sliding gate opener designed for automated operation of sliding gates. Here’s a breakdown of its key features and specifications based on the information available:

  • Type: Sliding Gate Opener. This means it’s for gates that move horizontally along a track, not swinging gates.
  • Capacity: It’s designed to handle gates with a maximum weight of 500 kg (approximately 1100 lbs).
  • Motor: It’s powered by a 24V DC electromechanical motor. DC motors are known for energy efficiency and are often suitable for battery backup and solar power options.
  • Key Features:
    • Automated Operation: Provides convenient opening and closing of your sliding gate.
    • Emergency Release: Includes manual release keys for operation during power failures.
    • Safety Mechanisms: Often includes features like soft start/stop (to reduce wear and tear) and auto-reverse (the gate reverses if it detects an obstruction).
    • Adjustable Auto-Close: The system likely has a built-in timer for automatic closing of the gate (e.g., 0, 30, 60, 90 seconds).
    • Reliable Limit Sensors: Uses spring limit sensors for easy adjustment of the gate’s open and close positions.
    • Expandability: Can be integrated with optional accessories such as keypads, additional remote controls, radio receivers, and safety sensors (like photocells).
  • Applications: Commonly used for both residential and light commercial applications, such as driveways, parking areas, and small commercial properties.
  • Construction: The control unit often features an air-stop seal against moisture and insects, and mechanical parts are typically lubricated with lithium grease for protection against corrosion.

It’s important to note that while the core specifications are consistent, some listings might mention slightly different maximum gate weights (e.g., 700kg or 800kg for other models or variations from the same brand). Always confirm the specific model number (RGSL0.5TN24) to ensure you have the correct specifications.

10 in stock

Compare
Add to wishlist
Categories: , Tags: , , , , , , , , , , ,
Description

Sliding gate opener -Royalgate RGSL0.5TN24

*Suitable gate weight: Maximum 500 Kg

A sliding gate opener -Royalgate RGSL0.5TN24 with a 500kg capacity is an automated system designed to open and close sliding gates weighing up to 500 kilograms. These openers are typically powered by a 24V DC motor and may include features like backup batteries, remote control, and safety mechanisms like soft start/stop and auto-reverse. They are commonly used for both residential and light commercial applications. 

Here’s a more detailed breakdown:
  • DC24V Power:

    The system is powered by a 24-volt direct current (DC) motor, which is known for its energy efficiency and suitability for battery and solar power options. 

  • 500kg Capacity:

    The opener is designed to handle gates weighing up to 500 kilograms (approximately 1100 pounds). 

  • Sliding Gate:

    The system is specifically designed for sliding gates, which move horizontally along a track, rather than swinging open. 

  • Automated Operation:

    The opener automates the gate’s movement, allowing it to be opened and closed remotely using a remote control or other input devices. 

  • Additional Features:

    Many models include features like:

    • Backup Battery: Allows the gate to operate during power outages. 
    • Soft Start/Stop: Ensures smooth and controlled gate movement, reducing wear and tear. 
    • Auto-Reverse: Reverses direction if the gate encounters an obstruction during closing, enhancing safety. 
    • Remote Control: Allows for convenient operation from a distance. 
    • Solar Power Compatibility: Some models can be integrated with solar panels for eco-friendly operation. 
    • Magnetic Limit Switch: Helps to precisely control the gate’s position during opening and closing. 
  • Applications:
    These openers are commonly used in both residential and light commercial settings, such as driveways, parking areas, and commercial properties. 
Additional information
Reviews (0)
Shipping & Delivery

You may also like…

Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Wireless safety sensor P51122H
Photoelectric wireless beam sensor P51122H
Compare

Wireless safety sensor P51122H

$99.95

Ship or pick up from our office.

Wireless safety sensor P51122H

(2 x AA Batteries are included) *NO/NC *AC/DC 12-24 V *Receiving Range: 12 Meters *IP 45   The P51122H is a wireless safety sensor primarily used in automatic gate and door systems, such as those for garages and industrial entrances. It's part of a broader wireless system designed to enhance safety by detecting obstructions and preventing damage or injury. 🚧 Key Features & Functionality The P51122H sensor operates on the 2.4 GHz spectrum, making it suitable for global use and allowing multiple installations to coexist without interference. Here are some of its key characteristics:
  • Wireless Operation: It eliminates the need for wires running across the opening, simplifying installation.
  • Safety Assurance: The sensor creates an invisible detection zone. If this zone is interrupted by an object or person while the gate/door is closing, the system will automatically stop or reverse its movement.
  • Universal Compatibility: It's designed to work with most door and gate reversing systems.
  • Easy Installation: Installation typically involves a simple pairing process with a wireless host module.
  • Durable Design: The components are housed in a robust, industrial-grade casing, often with an IP65 rating for water and dust resistance, and a UL Type 4x Enclosure for environmental and physical protection.
  • Battery Powered: It runs on AA batteries, with a low battery indicator and a long battery life (up to 10 years in some systems). The battery voltage is monitored, and if abnormal, motion can be denied for safety.
  • Compliance: It's typically FCC and IC licensed and cUR recognized, meeting safety standards like UL325.
  • Range: It generally has a line-of-sight range of about 150 feet.
  Applications The wireless safety sensor P51122H is commonly found in:
  • Garage doors: Preventing the door from closing on vehicles, people, or pets.
  • Automatic gates: Used for swing gates, sliding gates, and other automated entry systems to prevent collisions.
  • Industrial doors and docks: Ensuring safe operation in commercial and industrial environments.
These sensors are crucial for modern automated access systems, providing a vital layer of protection against accidents and property damage. Safety Instruction about the wireless safety sensor P51122H: 1. For security, please read the user manual carefully before initial operation; 2. This photocell is without any fuse, so Please make sure the power is off before installation; 3. Only used this system that do not cause any danger life or property during the running failure or its security eliminated; 4. Please guarantee the products used in effective working range. Technical Specification: 1.Working voltage: Receiver: 12~24VAC/DC Emitter:  2*1.5V, LR6 AA battery 2.Working current: Receiver(24VDC): ≤40mA  Emitter(2*1.5V, LR6 AA battery): ≤0.2mA 3.Photocell wavelength: 940nm 4.Angle of opposite emission: ≤±5º 5.Receiver range: ≥12m 6.Working temperature: -20º~+60ºC 7.Relay contact loading capacity: 1A/30VDC 8.Waterproof grade: IP54 9.Size: 128*50*28mm 10.Weight:245g
Add to wishlist
Add to cart
Quick view
Exit Button RCTPB801
Compare

Exit Button RCTPB801

$22.85

Ship or pick up from our office.

Exit Button RCTPB801

*Touch *Backlight *DC 12V *COM-NC-NO
An Exit push button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms. 
Here's a more detailed explanation:
  • Function:
    An exit push button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit. 
  • Purpose:
    They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available. 
  • Types:
    Exit push buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them. 
  • Importance:
    These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals. 
  • Applications:
    Exit push buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities.
Add to wishlist
Add to cart
Quick view
Sliding gate operator gear rack -SLGR41
Compare

Sliding gate operator gear rack -SLGR41

$14.45

Ship or pick up from our office.

Sliding gate operator gear rack -SLGR41

*4 Holes *Length: 1018 mm The SLGR41 is a gear rack specifically designed for sliding gate operators. It's a crucial component that works in conjunction with the gate motor's pinion gear to move the gate open and closed. Here's a breakdown of its characteristics:
  • Function: It provides the linear motion for a sliding gate when engaged with the rotating pinion of a gate motor.
  • Material: It's typically made of steel, often bright steel, for durability and strength. Some variations might also be nylon-covered steel or even full nylon for quieter operation, though steel is common for its robustness.
  • Dimensions: The SLGR41 typically comes in 1-meter (1000mm) or 1018mm lengths. It often has 4 holes for mounting to the gate frame. Common dimensions for such racks are around 12mm thickness and 30mm face width, although these can vary slightly.
  • Application: It's used in both residential and commercial sliding gate automation systems.
  • Features: It usually includes fixing points or lugs for secure attachment to the gate. These sections are designed to interlock or slide into each other to create the required length for the gate.
Add to wishlist
Add to cart
Quick view

Related products

Hot
swing gate opener NICE Wingo 4024
Compare

Single swing gate opener – NICE Wingo 4024

,
$956.75

Ship or pick up from our office.

Product Sheet PDF

Single swing gate opener – NICE Wingo 4024

*Suitable gate weight: Maximum 400 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Openers are designed to fit a wide range of settings and applications. The NICE Wingo 4024 is a popular electromechanical swing gate opener designed for automating residential and light industrial swing gates. It's known for its reliability, quiet operation, and ease of installation. Here's a breakdown of its key features and specifications: Key Features:
  • Suitable for a range of gates: It's typically designed for swing gates with leaves up to 2 meters (approximately 6.5 feet) in length and weighing up to 400 kg (approximately 880 lbs). Some sources also mention it being suitable for gates up to 3m, but 2m is more commonly cited.
  • 24 Vdc electromechanical gear motor: This provides efficient and relatively quiet operation.
  • Reliable and Silent: Thanks to a patented layout of its internal components, it has fewer moving parts, contributing to its durability and quiet performance.
  • Easy Installation: Electrical connections are made from above after the gear motor is assembled, simplifying the installation process. It also comes with pre-assembled travel stops for opening.
  • User-friendly release: In case of power failure, it features a convenient manual release mechanism, often with a personalized Nice key or a standard lock (optional).
  • Moonclever control unit (MC424/MC424L): This advanced control unit offers:
    • Simple programming via a single key.
    • Automatic memorization of limit switches for opening and closing with a self-learning function.
    • Anti-crush safety feature (clutch).
    • Automatic fault diagnostics.
    • Adjustable pause time.
    • Pedestrian pass-door function (partial opening).
    • Soft stop/start (deceleration) for smooth operation.
    • Obstacle detection with dual technology.
    • Compatibility with 8.2 KOhm resistive sensitive edges for enhanced safety.
    • Option for uninterrupted operation with rechargeable batteries (PS124/PS324) in case of power failure.
    • Compatibility with the Solemyo solar power system for off-grid installations.
  • Surface-mounted: It's designed to be mounted on the surface of the gate post.
  • Durable construction: Features tough aluminum shells with a polyester paint finish to resist atmospheric agents.
Technical Specifications (Typical):
  • Power Supply: 24 Vdc
  • Absorption: 3.5 A
  • Power: 85 W
  • Speed: 0.018 m/s
  • Force: 1500 N
  • Work Cycle: 30 cycles/hour
  • Protection Level (IP): 44 (protected against solid objects larger than 1mm and splashing water from any direction)
  • Working Temperature: -20°C to +50°C
  • Dimensions (mm): 770x98x95 (h)
  • Weight (kg): Approximately 6 kg per motor (a kit with two motors would be around 17 kg total)
The NICE Wingo 4024 is often sold as a "kit" (WingoKit 4024) which usually includes two gear motors, a control unit, remote controls, photocells (for safety), a flashing light, and other mounting hardware.
Add to wishlist
Add to cart
Quick view
Swing Gate Opener –Key Automation STAR3024
Compare

Dual Swing Gate Opener –Key Automation STAR3024

,
$1,257.35

Ship or pick up from our office.

Product Sheet PDF

Dual Swing Gate Opener –Key Automation STAR3024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor

TECHNICAL FEATURES

Speed cm/s 2,5
90° Opening time s 18-25
Force N 1400
Duty cycle percentage % 80
Control unit CT20224
Voltage Vdc 24
Nominal current A 3,5
Nominal power W 85
Appliance isolation class III
Degree of protection IP 54
Dimensions (L - D - H) mm 741 - 115 - 177
Item kg 9,24
Minimum operating temperature °C -20
Max operating temperature °C +55
Max leaf weight kg 400
Max leaf length m 3
Add to wishlist
Add to cart
Quick view
underground gate opener -VDS RG24
Compare

Dual swing underground gate opener -VDS RG24

,
$2,177.95

Ship or pick up from our office.

Product Sheet PDF

Dual swing underground gate opener -VDS RG24

*Suitable gate weight: Maximum 500 Kg (Per leaf) Included: *2 x Electromechanical motor *2 x Foundation box *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
A double swing underground gate opener is a type of automated gate system designed for double swing gates, where the gate is split into two separate panels that meet in the middle.
The opener mechanism is installed underground, making it virtually invisible and aesthetically pleasing. This dual swing gate opener -VDS RG24 setup allows for a shorter swing radius for each gate leaf compared to a single-panel swing gate. 
Here's a more detailed explanation:
  • Double Swing Gates:
    These gates consist of two gate panels that swing open independently, usually meeting in the middle of the opening. This design is often used for wider driveways or when a single, large gate would be impractical or aesthetically undesirable. 
  • Underground Installation:
    The gate opener mechanism (including the motor and related components) is placed in a foundation box installed below ground level, typically at the hinge point of the gate. 
  • Aesthetics and Space:
    This type of opener offers a cleaner, more discreet look, as the mechanics are hidden from view. It also allows for a shorter swing radius for each gate leaf, which is beneficial in spaces with limited clearance. 
  • Operation:
    The opener receives a signal, usually from a remote control or other access control system, which activates the motor. The motor then rotates a lever or arm connected to the gate, causing it to swing open or closed. 
  • Dual Gate Compatibility:
    Double swing gate openers typically require two gate motors, one for each gate leaf. 
  • Safety Features:
    Many underground gate openers include safety features like limit switches to control the start/stop speed and travel of the gate, as well as manual release mechanisms for emergency situations. 
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS EGO110
Compare

Single swing gate opener –VDS EGO110

,
$829.25

Ship or pick up from our office.

Product Sheet PDF

Single swing gate opener –VDS EGO110

*Suitable gate weight: Maximum 200 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key The VDS EGO110 is a model of single swing gate opener manufactured by VDS Automation. It is an electromechanical operator designed to automate swing gates. Here's a breakdown of its key characteristics and features:
  • Type: Linear screw electromechanical operator. This means it uses an electric motor to rotate a threaded shaft, which in turn pushes or pulls the gate.
  • Gate Compatibility:
    • Suitable for single swing gates.
    • Maximum gate leaf length: Up to 3 meters (some variations might support up to 2.5 meters).
    • Maximum gate weight: Up to 200 kg per leaf.
  • Construction:
    • Sturdy aluminum structure.
    • Stainless steel rod (with a typical stroke of 400mm).
    • Parts lubricated with lithium grease for protection against corrosion, oxidation, and rust.
  • Performance:
    • Quiet operation (typically < 30 dBA noise level).
    • High-performance electric motor.
    • Opening angle: Up to 120°.
    • Opening time: Around 20-25 seconds.
    • Thrust: 2000N.
    • Available in 120VAC and 24VDC versions. The 24VDC versions are often described as "intensive use" with higher frequency of use (90%) compared to 230VAC (50%).
  • Safety Features:
    • Anti-squashing system (compliant with EN 12453 standards).
    • Slowing down function.
    • Thermal cutout at 140° (for motor protection).
    • Obstacle detection (especially in 24V and some 120V versions).
  • Installation & Convenience:
    • Quick installation with multi-position brackets and a cover for brackets in technopolymer.
    • Manual release with a key for operation during power outages.
    • Optional limit switches.
    • Optional battery backup kit (for 24V models).
    • Often comes with a control unit (sometimes with a built-in receiver).
In essence, the single swing gate opener –VDS EGO110 is a robust and reliable electromechanical opener designed for automating residential and some commercial swing gates, focusing on durability, quiet operation, and safety features.
Add to wishlist
Add to cart
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Manual release key *1 x Safety sensor
A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view
Hot
swing gate opener NICE Wingo 4024
Compare

Double Swing Gate Opener NICE -Wingo 4024

,
$1,363.45

Ship or pick up from our office.

Product Sheet PDF

Double Swing Gate Opener NICE -Wingo 4024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Operators are designed to fit a wide range of settings and applications. The Double Swing Gate Opener NICE - Wingo 4024 is an electromechanical gear motor system designed for automating double swing gates. It's primarily used for residential and light industrial applications, offering a convenient and secure way to open and close gates without manual effort. Here's a breakdown of its key features and specifications: Key Features
  • Electromechanical Gear Motor: It utilizes a 24 Vdc electromechanical gear motor, known for its reliability and quiet operation.
  • Suitable for Various Gate Sizes: It can handle swing gates with individual leaves up to 2 meters in length or up to 400 kg in weight (for a gate leaf of 1 meter).
  • Surface Mounted: The system is designed for surface mounting, meaning the motors are installed directly onto the gate posts or pillars.
  • Easy Installation: Electrical connections are made from above the gear motor, simplifying the installation process.
  • User-Friendly Release: In case of a power failure, the gate can be manually unblocked and moved with a personalized Nice key or standard lock (optional).
  • Moonclever Control Unit (MC424L/MC824H): This advanced control unit offers several intelligent functions:
    • Simple Programming: Easy setup with a single button.
    • Automatic Memorization: Self-learning function for limit switches on opening and closing.
    • Anti-Crush Safety: Features a clutch with an anti-crush safety device to prevent damage or injury.
    • Obstacle Detection: Uses dual technology to detect obstacles during operation.
    • Programmable Functions: Allows for programming of pause time, pedestrian pass door function, and deceleration at the beginning and end of cycles.
    • Battery Backup Option: Can operate during power failures with optional rechargeable batteries (PS124/PS324) that fit inside the control unit.
    • Resistive Sensitive Edge Connection: Can be connected to 8.2 KOhm resistive sensitive edges for enhanced safety.
  • Durable Construction: Features tough aluminum shells with polyester paint finish, making it resistant to atmospheric agents. Internal moving parts are made of steel, light alloys, and techno-polymers for durability.
  • Mechanical Limit Switches: Includes pre-assembled mechanical limit switches for setting the open position.
Add to wishlist
Add to cart
Quick view
Hot
swing gate opener -Royalgate RGSW700
Compare

Single swing gate opener -Royalgate RGSW700

,
$519.85

Ship or pick up from our office.

Single swing gate opener -Royalgate RGSW700

*Suitable gate weight: Maximum 150 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
A single swing gate opener is a mechanical device designed to automate the opening and closing of a single, solid gate that swings open on a hinge, typically for driveways or entrances.
It consists of a motor and an opening mechanism, often with a control unit, that allows the gate to swing open and closed with the push of a button or remote control, rather than manually. 
Key features and considerations:
  • Single Panel:
    Unlike double swing gates that have two panels meeting in the middle, a single swing gate has one large panel that swings open in a single direction. 
  • Space Requirements:
    Single swing gates require sufficient space behind the gate for it to swing open fully without obstruction. 
  • Installation:
    Single swing gate openers can be installed on various gate types, including steel, wood, vinyl, and chain-link. 
  • Motor Types:
    Common motor types include those that are:
    • In-ground: Motors are installed beneath the ground, providing a cleaner look. 
    • Arm-mounted: Motors with arms that extend to push or pull the gate. 
  • Applications:
    Single swing gate openers are suitable for residential and commercial properties, offering convenience and security. 
  • Safety Features:
    Many openers include safety mechanisms like soft start and stop, and sensors to prevent the gate from hitting obstacles. 
  • Dual Functionality:
    Some openers are designed to handle both single and double swing gates, providing flexibility. 
Add to wishlist
Add to cart
Quick view
Swing gate opener -Zero ZSW400
Compare

Dual swing gate opener -Zero ZSW400

,
$1,237.15

Ship or pick up from our office.

Dual swing gate opener -Zero ZSW400

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view