Swing gate opener -Royalgate RGSW650
Click to enlarge
Underground Swing Gate Opener -VDS RG110
Underground Dual Swing Gate Opener -VDS RG110 $2,103.60
Back to products
Swing gate opener -VDS Articulated
Single swing gate opener -VDS Articulated $1,012.30

Single swing gate opener -Royalgate RGSW650

$453.35

Ship or pick up from our office.

Single swing gate opener -Royalgate RGSW650

*Suitable gate weight: Maximum 100 Kg

Included:
*1 x Electromechanical arm
*1 x Main control board
*1 x Waterproof box
*2 x Remote control
*1 x Set safety sensor
*1 x Manual release key

Compare
Add to wishlist
Categories: , Tags: , , , , , , , ,
Description

Single swing gate opener -Royalgate RGSW650

*Suitable gate weight: Maximum 100 Kg

The Royalgate RGSW650 is a swing gate opener designed for residential and light commercial applications. Here’s a breakdown of its key features and specifications:

Key Features:

  • Single Gate Operation: It’s specifically designed for automating a single swing gate.
  • Weight and Length Capacity: It can handle a maximum gate weight of 100 kg (approximately 220 lbs) and a single-leaf length of up to 2 meters (6.5 feet). Some listings also mention a higher capacity for a single gate up to 660 lbs and 3 meters. It’s important to verify the exact capacity with the vendor based on the specific model.
  • Motor: It utilizes a 24VDC 40W motor.
  • Speed: The arm’s extended speed is approximately 1.6 cm/s.
  • Safety Features:
    • Obstacle Detection: The system is designed to stop working or reverse if the gate encounters an obstacle during operation.
    • Soft Start/Soft Stop: This feature helps to reduce wear and tear on the motor and gate by gradually increasing and decreasing speed at the beginning and end of each cycle.
    • Manual Release: In case of power failure, the clutch can be easily released to operate the gate manually.
  • Control Box: It comes with a waterproof (IP55 rated) control box that includes a 24V transformer.
  • Remote Control: It includes two remote controls for opening and closing the gate.
  • Optional Accessories: The system supports various optional accessories for enhanced security and convenience, such as:
    • IR photocells (infrared sensors) for additional safety (the gate will open automatically if the beam is cut while closing).
    • Flashing warning light.
    • Wireless password keypad.
    • Gate lock for added security.
    • Solar power compatibility (requires separate solar panel and batteries).
  • DIY Friendly: It is generally advertised as being easy to install and suitable for DIY projects.
  • Opening Options: Can be programmed for inward or outward opening.

Included Components (Standard Kit):

  • 1 x Electromechanical arm (drive motor)
  • 1 x Control Box (with transformer/24V)
  • 1 x Set of hardware accessories
  • 1 x Rubber stopper
  • 2 x Remote controls
  • 1 x Set safety sensor
  • 1 x Manual release key

It’s always recommended to consult the official product manual or the seller for the most accurate and up-to-date specifications and installation guidelines for the Royalgate RGSW650.

Additional information
Weight 11.7 kg
Dimensions 87 × 32 × 15 cm
Model

RGSW650
Maximum gate weight

Maximum 100 Kg
IN/M

IN:120/M:24
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Single swing gate opener -Royalgate RGSW650”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Reflective safety sensor PQ58
Compare

Reflective safety sensor PQ58

$116.80

Ship or pick up from our office.

Add to wishlist
Add to cart
Quick view
USB Gate Operator Remote
Compare

USB Gate Operator Remote

$107.30

USB Gate Operator Remote

A USB gate operator remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car's USB port and using it as a remote. USB Gate Operator Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. Here's a more detailed explanation: -How it works: USB Dongle: The device typically includes a small USB dongle that plugs into your car's USB port. Sensing Signal: When the USB is plugged in and the car is in the "on" mode, the dongle emits a sensing signal. Receiver: The signal is received by a unit connected to the driveway gate motor. Gate Motor Activation: The receiver then activates the gate motor, causing the driveway gate to open or close. -Key features: Dual Control Modes: Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle. Compact and Portable: The USB dongle is small and lightweight, making it easy to use and store in your car. Easy Installation: It's designed for simple plug-and-play functionality, requiring no complex setup. Replacement Accessory: It serves as a convenient replacement for traditional gate remote controls.
Add to wishlist
Add to cart
Quick view
Wireless safety sensor P51122H
Photoelectric wireless beam sensor P51122H
Compare

Wireless safety sensor P51122H

$99.95

Ship or pick up from our office.

Wireless safety sensor P51122H

(2 x AA Batteries are included) *NO/NC *AC/DC 12-24 V *Receiving Range: 12 Meters *IP 45   The P51122H is a wireless safety sensor primarily used in automatic gate and door systems, such as those for garages and industrial entrances. It's part of a broader wireless system designed to enhance safety by detecting obstructions and preventing damage or injury. 🚧 Key Features & Functionality The P51122H sensor operates on the 2.4 GHz spectrum, making it suitable for global use and allowing multiple installations to coexist without interference. Here are some of its key characteristics:
  • Wireless Operation: It eliminates the need for wires running across the opening, simplifying installation.
  • Safety Assurance: The sensor creates an invisible detection zone. If this zone is interrupted by an object or person while the gate/door is closing, the system will automatically stop or reverse its movement.
  • Universal Compatibility: It's designed to work with most door and gate reversing systems.
  • Easy Installation: Installation typically involves a simple pairing process with a wireless host module.
  • Durable Design: The components are housed in a robust, industrial-grade casing, often with an IP65 rating for water and dust resistance, and a UL Type 4x Enclosure for environmental and physical protection.
  • Battery Powered: It runs on AA batteries, with a low battery indicator and a long battery life (up to 10 years in some systems). The battery voltage is monitored, and if abnormal, motion can be denied for safety.
  • Compliance: It's typically FCC and IC licensed and cUR recognized, meeting safety standards like UL325.
  • Range: It generally has a line-of-sight range of about 150 feet.
  Applications The wireless safety sensor P51122H is commonly found in:
  • Garage doors: Preventing the door from closing on vehicles, people, or pets.
  • Automatic gates: Used for swing gates, sliding gates, and other automated entry systems to prevent collisions.
  • Industrial doors and docks: Ensuring safe operation in commercial and industrial environments.
These sensors are crucial for modern automated access systems, providing a vital layer of protection against accidents and property damage. Safety Instruction about the wireless safety sensor P51122H: 1. For security, please read the user manual carefully before initial operation; 2. This photocell is without any fuse, so Please make sure the power is off before installation; 3. Only used this system that do not cause any danger life or property during the running failure or its security eliminated; 4. Please guarantee the products used in effective working range. Technical Specification: 1.Working voltage: Receiver: 12~24VAC/DC Emitter:  2*1.5V, LR6 AA battery 2.Working current: Receiver(24VDC): ≤40mA  Emitter(2*1.5V, LR6 AA battery): ≤0.2mA 3.Photocell wavelength: 940nm 4.Angle of opposite emission: ≤±5º 5.Receiver range: ≥12m 6.Working temperature: -20º~+60ºC 7.Relay contact loading capacity: 1A/30VDC 8.Waterproof grade: IP54 9.Size: 128*50*28mm 10.Weight:245g
Add to wishlist
Add to cart
Quick view
Electric Rim Lock RGEL1093
Compare

Electric Rim Lock RGEL1093

$293.95

Ship or pick up from our office.

Electric Rim Lock RGEL1093

*Capacity: 2000 Kg *DC 12 V *15 W (5 x release keys are included) This is a heavy-duty electric lock that holds the gate closed. The lock latches strongly to the hook and prevents the gate to be opened by wind or intruders. It will release automatically before the arms start moving. There are five keys in the package for unlocking during power outages. Free installation session is provided in our office. Watch previous project videos on our YouTube channel.
  • Heavy Duty
  • High Security
  • Quiet Operation
  • Compatible with single and double swing gates
  • Keeps full privacy gates in place in windy weather
The RGEL1093 is a heavy-duty electric rim lock designed for gates. It latches securely to prevent opening by wind or intruders and releases automatically before gate movement. The lock includes five keys for manual unlocking during power outages. 
Here's a more detailed breakdown:
  • Function:
    The RGEL1093 is a surface-mounted lock that provides a secure latch for gates. 
  • Security:
    It is designed to withstand strong winds and prevent unauthorized entry. 
  • Automatic Release:
    The lock releases automatically as the gate's opening mechanism starts to move. 
  • Power Outages:
    The inclusion of five keys allows for manual operation when power is unavailable. 
  • Installation:
    It's a rim lock, meaning it's mounted on the surface of the gate, rather than being mortise-set into the edge. 
  • Typical Use:
    Electric rim locks are often used in conjunction with access control systems (like intercoms or keypads) for residential and commercial applications. 
Add to wishlist
Add to cart
Quick view
Smartphone Gate Controller
Compare

Smartphone Gate Controller

$76.80

Ship or pick up from our office.

Smartphone Gate Controller

A Smartphone gate controller module primarily connects to your existing gate opener by essentially "mimicking" the action of a traditional wired push button or a remote control. Here's a breakdown of the common connection methods:
1. Wired Connection to the Gate Opener's Control Board (Most Common):
  • "Dry Contact" or "Push Button" Terminals: Most gate opener control boards have terminals designed for a wired wall control panel or push button. These are often labeled as "COM" (Common), "PUSH," "START," "CYCLE," or similar.
  • Relay Connection: The Wi-Fi gate controller module typically contains a relay. When you send a command from your smartphone app, the module activates this relay. The relay then momentarily closes a circuit between the designated terminals on your gate opener's control board. This "short circuit" or "dry contact" action is interpreted by the gate opener as a signal to open or close, just as if you had pressed a physical button.
  • Power Supply: The Wi-Fi module itself needs power. It can often be powered directly from the gate opener's control board (if it provides a suitable low-voltage output, e.g., 7-32V), or it might require a separate power adapter (like a 5V USB power supply).
2. "Hacking" an Existing Remote Control (DIY Approach):
  • Some DIY solutions involve wiring the Wi-Fi module to the internal contacts of an existing gate remote control.
  • The module then "presses" the button on the remote control electronically, sending the same signal the remote would normally send to the gate opener. This is less common for commercial products and more of a hobbyist project.
    Key Components and How They Work Together:
  • Wi-Fi Connection: The module connects to your home's Wi-Fi network (2.4 GHz). This allows your smartphone (via the internet) to communicate with the module.
  • Control Board (within the module): This is the "brain" of the module, receiving commands from your smartphone and translating them into signals for the gate opener.
  • Relay: The electromechanical switch that closes the circuit on the gate opener's control board.
  • Input Terminals (optional): Some modules may have inputs for sensors (e.g., magnetic sensors) that can tell you the gate's open/closed status, which is then communicated back to your app.
    General Installation Steps:
  1. Locate the Gate Opener Control Board: This is usually found within the gate opener's housing.
  2. Identify the Control Terminals: Refer to your gate opener's manual to find the terminals for a push button or wall control.
  3. Wire the Module: Connect the output wires from the Wi-Fi module's relay to the appropriate control terminals on the gate opener's board.
  4. Power the Module: Connect the module to a suitable power source.
  5. Connect to Wi-Fi and App: Follow the manufacturer's instructions to connect the module to your Wi-Fi network and pair it with the smartphone app.
  6. Test: Test the functionality from your smartphone.
    Important Considerations:
  • Compatibility: Always check the compatibility of the Wi-Fi module with your specific gate opener brand and model. Some modules are universal, while others are designed for certain manufacturers.
  • Wiring Diagrams: Always consult the wiring diagrams provided by both your gate opener manufacturer and the Wi-Fi module manufacturer.
  • Safety: If you're not comfortable with electrical wiring, it's best to consult a professional electrician or gate technician.
  • Wi-Fi Signal Strength: Ensure a strong 2.4 GHz Wi-Fi signal at the location of the gate opener for reliable operation. You may need a Wi-Fi extender if the gate is far from your router.
Add to wishlist
Add to cart
Quick view
Gate adjustable hinges
Compare

Gate adjustable hinges

$17.35

Ship or pick up from our office.

Gate adjustable hinges

*Steel material *Heavy-duty hinge *5-1/2” Length (Total 7-1/2”) x 4-1/2” Width *Bolt thickness: 3⁄4” Gate adjustable hinges are a type of hinge designed to allow for precise adjustments to a gate's position and alignment even after it has been installed. Unlike traditional fixed hinges, which offer little to no post-installation flexibility, adjustable hinges provide the ability to fine-tune the gate's fit. This feature is particularly beneficial for gates that may sag over time due to their weight, ground settling, or weather changes.   Why are Adjustable Hinges Important? Adjustable hinges solve common problems associated with gate installation and long-term use. Without them, realigning a sagging or misaligned gate often requires removing the gate, cutting, re-welding, and repainting the hinges, which is a time-consuming and labor-intensive process. With adjustable hinges, these adjustments can typically be made with simple tools like an Allen key or an adjustable wrench.   Key Features and Adjustments Adjustable hinges offer various levels of adjustment, which can include:
  • In/Out Adjustment: This is the most common adjustment, allowing the gate to be moved closer to or further away from the post. This helps eliminate gaps or prevent the gate from rubbing against the frame.
  • Up/Down Adjustment: This allows for vertical alignment, which is crucial for ensuring the gate clears the ground and for aligning the gate's lock with its strike plate, especially for double swing gates.
  • Left/Right Adjustment: Some advanced models offer lateral adjustment, providing ultimate flexibility in positioning the gate along its width. This can also help in adjusting the gate's tilt.
Many models also feature locking mechanisms, such as serrated washers or set screws, to ensure that once the adjustment is made, the gate remains securely in place.   Types of Adjustable Hinges Adjustable hinges come in various forms, often incorporating the adjustability into existing hinge designs:
  • Adjustable Eye Bolts: These are threaded components that allow vertical and horizontal adjustment, typically used with hook-on plates or gate pins.
  • Adjustable Band and Gudgeon Hinges: Similar to traditional band and gudgeon hinges, but with a threaded bolt and nuts for adjustment.
  • Weld-on Adjustable Hinges: Designed to be welded directly to metal gates and posts, offering strong support and adjustability.
  • Bolt-on Adjustable Hinges: These are bolted to the gate and post, making them suitable for various gate materials.
  • Barrel Hinges (Adjustable): Often featuring a set screw for up/down adjustments, suitable for heavier loads and offering a robust design.
  • Adjustable Self-Closing Hinges: Some adjustable hinges also incorporate a self-closing mechanism, which is ideal for security gates or areas where the gate needs to close automatically.
Advantages of Using Adjustable Hinges
  • Ease of Installation and Adjustment: They simplify the initial installation process by allowing for fine-tuning without needing to perfectly align everything from the start. Subsequent adjustments due to settling or wear are also quick and easy.
  • Longevity: By maintaining proper alignment, adjustable hinges reduce wear and tear on both the gate and the hinges themselves, extending their lifespan.
  • Enhanced Security: Proper alignment minimizes gaps around the gate, making it harder for unauthorized entry.
  • Versatility: They are available in various sizes and load capacities, suitable for everything from lightweight garden gates to heavy-duty industrial gates.
  • Reduced Maintenance Costs: The ability to easily adjust the gate's position can significantly reduce the need for costly repairs or re-installations.
  • Improved Aesthetics: Ensures the gate maintains a straight and professional appearance, avoiding unsightly sagging or misalignment.
  Materials and Finishes Adjustable hinges are manufactured from durable materials to withstand outdoor conditions and heavy use. Common materials include:
  • Steel: Strong and ideal for heavy-duty gates, often galvanized or treated to prevent rust.
  • Stainless Steel: Offers excellent corrosion resistance, making it perfect for outdoor and high-moisture environments.
  • Zinc-plated Steel: Provides a good balance of durability, cost-effectiveness, and rust protection.
  • Brass: Less strong than steel but used for decorative purposes due to its aesthetic appeal.
Finishes often include black powder-coating for a sleek look and added protection, or galvanization for superior corrosion resistance, especially in industrial or harsh weather conditions.
Add to wishlist
Add to cart
Quick view
Sold out
Video doorbell
Compare

Video doorbell

$189.45

Ship or pick up from our office.

Video doorbell

This video doorbell system is wired, it includes a 1-outdoor color camera and 1-color LCD 7-inch screen. With an ultra-flat design, great sound quality, dimmable display, 16 selectable doorbell tones for additional personalization, integrated video doorphone, and access control, it brings more convenience to daily use. You can both see and speak with all visitors. The outdoor camera provides a 92-degree viewing angle, ABS, and Acrylic front panel to protect against potential vandalism. Waterproofing and IR LED projection provide both durability and clear images no matter the weather or time of day/night.
Add to wishlist
Read more
Quick view
Video Doorbell B122
Compare

Video Doorbell B122

$789.45

Video Doorbell B122

*Touch keypad *RFID card or tag *Control two doors/gates *POE Powered *Control the video doorbell system using monitor and smartphone *Rain sheild cover on the camera panel *7” LCD Touch Screen

*On the 7" screen monitor, you can view and talk with visitors in real-time, review missed call history, browse through snapshots taken by outdoor stations then store them here.

*Each apartment should have one mandatory main indoor station or up to 5 extension indoor stations.

*All Configurations are done on the main indoor station.

*Compatible with BCOM PoE Doorbell Intercom, add and view up to 6 IP cameras from the indoor station.

Add to wishlist
Add to cart
Quick view

Related products

Swing gate opener -VDS EGO110
Compare

Double swing gate opener –VDS EGO110

,
$1,181.30

Ship or pick up from our office.

Product Sheet PDF

Double swing gate opener –VDS EGO110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Safety sensor *2 x Manual release key The VDS EGO110 is a type of double swing gate opener manufactured by VDS Automation. Here's a breakdown of its key characteristics:
  • Type: It's an electromechanical operator designed for swing gates, meaning it uses an electric motor to open and close the gate leaves. It often utilizes a linear screw or ram type mechanism, pushing and pulling a piston or rotating a threaded shaft to move the gate.
  • Application: It's specifically for double swing gates, which are gates with two leaves that open and close from the center.
  • Construction: It features a sturdy aluminum structure and a stainless steel rod, designed for durability and resistance to corrosion, oxidation, and rust.
  • Gate Capacity: The VDS EGO110 is suitable for gates with a maximum leaf weight of 200 kg (approximately 440 lbs) and a maximum leaf length of 3 meters (approximately 9.8 feet) per leaf.
  • Operation:
    • It offers a 120° opening angle.
    • It can operate with either a 120V AC power supply. The 24V DC version is typically more intensive in its use frequency.
    • It has an anti-squashing system (EN 12453) and a slowing down function (EN 12453) for safety, stopping or reversing if an obstacle is detected.
    • It features quiet operation (less than 30 dBA noise level).
    • It includes a manual release with a key for operation during power outages.
    • Opening time is generally 20-25 seconds.
  • Installation: It's designed for quick installation with multi-position brackets.
  • Environmental Conditions: It's built to operate in temperatures ranging from -20°C to +55°C (-4°F to 131°F) and has an IP55 protection rating, indicating good resistance to dust and water.
  • Optional Features: Optional limit switches and a battery backup kit are available.
In essence, the double swing gate opener –VDS EGO110 is a robust and reliable choice for automating double swing gates, particularly for residential or light commercial applications where the gate size and weight are within its specified limits.
Add to wishlist
Add to cart
Quick view
Hot
underground gate opener -VDS RG24
Compare

Single swing underground gate opener -VDS RG24

,
$1,526.85

Ship or pick up from our office.

Product Sheet PDF

Single swing underground gate opener -VDS RG24

*Suitable gate weight: Maximum 500 Kg Included: *1 x Electromechanical motor *1 x Foundation box *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
An underground single swing gate opener is a device installed beneath a gate to automate its opening and closing, specifically for gates that swing open and closed on a single axis.
The undergroung single swing gate opener -VDS RG24 is designed to be discreet, with the mechanism hidden underground, making it a preferred choice for those prioritizing aesthetics. 
Key features and benefits of single swing underground gate openers:
  • Concealed Mechanism:
    The primary advantage is that the motor and other components are installed underground, keeping the gate's appearance unchanged. 
  • Aesthetics:
    This makes them ideal for residential settings where maintaining the visual appeal of the gate is important. 
  • Space Efficiency:
    They don't require the extra space that some other gate opener types need for the motor and arm. 
  • Durability:
    Often built with robust materials like die-cast aluminum and stainless steel components, they are designed for longevity and resistance to corrosion. 
  • Safety Features:
    Many models include features like anti-crushing devices and speed slowdown, which are crucial for safety. 
  • Silent Operation:
    Underground openers can be designed for quiet operation, enhancing user experience. 
  • Easy Installation:
    Some models offer simplified installation procedures and low maintenance requirements. 
  • Versatility:
    They can be used with various gate materials, including steel, wood, and vinyl. 
  • Optional Features:
    Many models offer optional features like battery backup, remote control, and safety sensors. 
Considerations when choosing an underground swing gate opener:
  • Gate Size and Weight: Ensure the opener can handle the size and weight of your specific gate. 
  • Gate Material: Verify compatibility with your gate's material (e.g., steel, wood, vinyl). 
  • Slope: If your driveway has a slope, consider how it might affect the opener's performance. 
  • Manual Release: If you need manual operation for emergencies, ensure the opener has a reliable manual release mechanism. 
  • Power Source: Check if the opener is compatible with your power supply (e.g., AC or DC). 
Add to wishlist
Add to cart
Quick view
underground gate opener -VDS RG24
Compare

Dual swing underground gate opener -VDS RG24

,
$2,177.95

Ship or pick up from our office.

Product Sheet PDF

Dual swing underground gate opener -VDS RG24

*Suitable gate weight: Maximum 500 Kg (Per leaf) Included: *2 x Electromechanical motor *2 x Foundation box *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
A double swing underground gate opener is a type of automated gate system designed for double swing gates, where the gate is split into two separate panels that meet in the middle.
The opener mechanism is installed underground, making it virtually invisible and aesthetically pleasing. This dual swing gate opener -VDS RG24 setup allows for a shorter swing radius for each gate leaf compared to a single-panel swing gate. 
Here's a more detailed explanation:
  • Double Swing Gates:
    These gates consist of two gate panels that swing open independently, usually meeting in the middle of the opening. This design is often used for wider driveways or when a single, large gate would be impractical or aesthetically undesirable. 
  • Underground Installation:
    The gate opener mechanism (including the motor and related components) is placed in a foundation box installed below ground level, typically at the hinge point of the gate. 
  • Aesthetics and Space:
    This type of opener offers a cleaner, more discreet look, as the mechanics are hidden from view. It also allows for a shorter swing radius for each gate leaf, which is beneficial in spaces with limited clearance. 
  • Operation:
    The opener receives a signal, usually from a remote control or other access control system, which activates the motor. The motor then rotates a lever or arm connected to the gate, causing it to swing open or closed. 
  • Dual Gate Compatibility:
    Double swing gate openers typically require two gate motors, one for each gate leaf. 
  • Safety Features:
    Many underground gate openers include safety features like limit switches to control the start/stop speed and travel of the gate, as well as manual release mechanisms for emergency situations. 
Add to wishlist
Add to cart
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Manual release key *1 x Safety sensor
A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view
Swing gate opener -Zero ZSW400
Compare

Single swing gate opener -Zero ZSW400

,
$868.35

Ship or pick up from our office.

Single swing gate opener -Zero ZSW400

*Suitable gate weight: Maximum 200 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS MP110
Compare

Dual swing gate opener -VDS MP110

,
$1,230.35

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener -VDS MP110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor The VDS MP110 is a model of electromechanical swing gate opener manufactured by VDS Automation. It's designed for automating single or double leaf swing gates, commonly used for residential and light-industrial applications. Here's a breakdown of its key features and specifications: Key Features
  • Suitable Gate Size and Weight:
    • It can handle gates with a maximum weight of up to 200 kg (per leaf).
    • It supports gate leaf lengths ranging from 1.80 meters up to 3.50 meters.
  • Durable Construction: It features a sturdy aluminum structure and a strong rolled warm shaft, indicating robust build quality for longevity.
  • Quiet Operation: The VDS MP110 is known for its very quiet operation.
  • Safety Features:
    • Anti-squashing system (EN 12453): This is a crucial safety feature that prevents the gate from exerting excessive force if it encounters an obstruction, minimizing the risk of injury or damage.
    • Slowing down function (EN 12453): This allows the gate to slow down before reaching its fully open or closed position, ensuring smoother operation and reducing impact.
    • Thermal cut-out 140°: This protects the motor from overheating.
  • Manual Release: It includes a manual release with a key, allowing you to operate the gate manually in case of a power outage.
  • Lubrication: Mechanical parts are lubricated with lithium grease to protect against corrosion, oxidation, and rust.
  • Opening Angle: It offers a 120° opening capability. Some systems can be further enhanced for a 180-degree opening with optional chain drive systems.
  • Easy Installation: It is designed for quick installation with multi-position brackets and technopolymer covers for the brackets.
  • Motor and Power: It features a high-performance electric motor and typically operates on a 120V AC power supply, though some versions may support 24V DC.
  • Limit Switches: It has a standard opening limit switch, with an optional closing limit switch.
Variants The VDS MP110 series likely includes variations with different rod stroke lengths (e.g., 300mm, 400mm, 500mm), which determine the maximum gate leaf length they can accommodate.
Add to wishlist
Add to cart
Quick view
Swing Gate Opener –Key Automation STAR3024
Compare

Dual Swing Gate Opener –Key Automation STAR3024

,
$1,257.35

Ship or pick up from our office.

Product Sheet PDF

Dual Swing Gate Opener –Key Automation STAR3024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor

TECHNICAL FEATURES

Speed cm/s 2,5
90° Opening time s 18-25
Force N 1400
Duty cycle percentage % 80
Control unit CT20224
Voltage Vdc 24
Nominal current A 3,5
Nominal power W 85
Appliance isolation class III
Degree of protection IP 54
Dimensions (L - D - H) mm 741 - 115 - 177
Item kg 9,24
Minimum operating temperature °C -20
Max operating temperature °C +55
Max leaf weight kg 400
Max leaf length m 3
Add to wishlist
Add to cart
Quick view
Underground Swing Gate Opener -VDS RG110
Compare

Underground Dual Swing Gate Opener -VDS RG110

,
$2,103.60

Ship or pick up from our office.

Product Sheet PDF

Underground Dual Swing Gate Opener -VDS RG110

*Suitable gate weight: Maximum 500 Kg (Per leaf) Included: *2 x Electromechanical motor *2 x Foundation box *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor The swing gate opener -VDS Underground RG110 is one of the best underground swing gate operators that can be installed for the swing driveway gates. The swing gate opener -VDS Underground RG110 is Italian-made and can be installed for heavy swing gates. *Electromechanical Motor *Maximum gate weight: 500 Kg *120 V
Add to wishlist
Add to cart
Quick view