Safety Sensor - Key Automation 900FT33
Click to enlarge
Radio receiver
Remote Control Radio Receiver $59.45
Back to products
swing gate opener -VDS RG24
Dual swing gate opener -VDS RG24 $2,177.95

Safety Sensor – Key Automation 900FT33

$176.60

Ship or pick up from our office.

Safety Sensor – Key Automation 900FT33

  • NO/NC
  • AC 10-30 V / DC 10-40 V
  • Receiving Range: 25 Meters
  • IP 54

The photocell safety sensor of the FT series are devices applicable to the automation of doors and gates, which allow to detection of the presence of obstacles along the route between transmitter and receiver.

Compatible with sliding and swing gate operators. Best with Key RAY, STAR swing gate operator, and SUN, TURBO sliding gate operator.

Watch a video of our previous project on our YouTube channel.

The Key Automation 900FT33 is a photoelectric safety sensor designed for use with automated gates and doors.

It acts as a safety feature by detecting obstacles in the path of the gate or door and preventing it from closing on them. It’s typically used in conjunction with sliding and swing gate operators. 

Compare
Add to wishlist
Category: Tags: , , , , , , , , , Brand:
Description

Safety Sensor – Key Automation 900FT33

  • For the safety of people, it is important to follow these instructions and save them for future use.

Read the instructions carefully before starting installation. The design and manufacture of the devices making up the product and the information contained in this manual comply with safety regulations. However, wrong installation and programming may cause serious physical injury to those who perform the work and those who will use the device. For this reason, during installation, it is important to carefully follow all instructions in this manual.

Warning: any use other than the one described, and carried out under environmental conditions other than the ones described in this manual, is to be considered improper and prohibited.

Preliminary checks

Before installing this product, verify and check the following steps:
• Make sure that the surface where the device is going to be secured is solid and does not allow vibration
• Use electrical connections suitable for the electric requirements
• Verify that the power supply complies with the technical characteristics

Assembly Description

Prepare for the passing of the cables
• Open the cover of the photocells with the help of a screwdriver
• Secure the base to the wall using the screws provided
• Proceed with the required wiring following the electric diagram for the photocell connection
• Check the alignment of the transmitter and receiver making sure that the led “L” of the receiver
remains continuously on
• Select the desired typology for the OUT contact
• Mount the cover with the infrared screen
• Verify J3: Contact normally closed NC (by factory default) – Contact normally open NO

Additional information
Weight 0.15 kg
Dimensions 10 × 9 × 8 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Safety Sensor – Key Automation 900FT33”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Swing Gate Opener –Key Automation STAR3024
Compare

Dual Swing Gate Opener –Key Automation STAR3024

,
$1,257.35

Ship or pick up from our office.

Product Sheet PDF

Dual Swing Gate Opener –Key Automation STAR3024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor

TECHNICAL FEATURES

Speed cm/s 2,5
90° Opening time s 18-25
Force N 1400
Duty cycle percentage % 80
Control unit CT20224
Voltage Vdc 24
Nominal current A 3,5
Nominal power W 85
Appliance isolation class III
Degree of protection IP 54
Dimensions (L - D - H) mm 741 - 115 - 177
Item kg 9,24
Minimum operating temperature °C -20
Max operating temperature °C +55
Max leaf weight kg 400
Max leaf length m 3
Add to wishlist
Add to cart
Quick view
swing gate opener – Key Automation RAY2224
Compare

Dual swing gate opener – Key Automation RAY2224

,
$1,471.95

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener – Key Automation RAY2224

*Suitable gate weight: Maximum 500 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety Sensor
A swing gate opener is a device that automates the opening and closing of a swing gate, typically using a motor and a control system.
It provides a convenient and secure way to control access to a property, whether residential, commercial, or industrial. These openers can be used with various gate types, including those that swing inward or outward. 
AC DIY Double Swing Gate Automation kit (GTR058) - Richmond ...
Here's a more detailed explanation:
How it works:
  • Motor:
    A motor, powered by electricity (AC or DC), provides the force to move the gate. 
  • Control System:
    A control board receives signals from a remote control, keypad, or other access control system and activates the motor accordingly. 
  • Opening Mechanism:
    Depending on the type of swing gate opener, the mechanism can be a linear arm, an articulated arm, or an underground system. 
  • Safety Features:
    Many swing gate openers include safety features like obstruction detection, which stops the gate if it encounters an obstacle during opening or closing. 
  • Emergency Release:
    An emergency release mechanism allows manual operation of the gate in case of power failure. 
Types of Swing Gate Openers:
  • Linear Arm: These are the most common type, using a linear actuator to push or pull the gate. 
  • Articulated Arm: These use a hinged arm to move the gate, reducing strain on the hinges. 
  • Underground: The motor and mechanism are installed underground, providing a more discreet appearance. 
  • Dual Swing: These openers are designed for gates that swing open from the center. 
Benefits of using a swing gate opener:
  • Convenience: Automatic opening and closing of the gate with the press of a button or remote control.
  • Security: Prevents unauthorized access to the property.
  • Enhanced Property Value: Adds a layer of sophistication and security to the property.
  • Accessibility: Can be particularly useful for people with mobility issues. 
Add to wishlist
Add to cart
Quick view
Swing gate opener -KeyAutomation STAR3024
Compare

Single swing gate opener -Key Automation STAR3024

,
$882.50

Ship or pick up from our office.

Product Sheet PDF

Single swing gate opener -Key Automation STAR3024

*Suitable gate weight: Maximum 400 Kg per leaf Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
Add to wishlist
Add to cart
Quick view
Gate operator main control board – KeyAutomation
Compare

Gate operator main control board – Key Automation

$357.80

Ship or pick up from our office.

Gate operator main control board – Key Automation

A swing gate operator's main control board is the "brain" of the system, responsible for managing all the functions of the gate opener.
It receives signals from various input devices like remote controls, keypads, and safety sensors, and then directs the gate motor to open or close the gate accordingly. The control board also manages other aspects of the gate operation, such as adjusting speed, setting timers, and implementing safety features. 
Here's a more detailed breakdown:
  • Central Control:
    The control board acts as the central hub for all gate operations. 
  • Signal Processing:
    It receives signals from different devices (remote, keypad, safety sensors). 
  • Motor Activation:
    Based on the received signal, the control board sends instructions to the motor to open or close the gate. 
  • Adjustable Settings:
    Many control boards allow for adjustments to gate speed, opening/closing times, and safety settings. 
  • Safety Features:
    Some control boards manage security features like locking mechanisms and safety protocols. 
  • Power Supply:
    The control board is usually powered by a specific voltage (e.g., 120 volts) and may have an output voltage for powering other accessories. 
  • Internal Receiver:
    Some control boards have built-in radio receivers for remote control operation. 
Add to wishlist
Add to cart
Quick view
swing gate opener – Key Automation RAY2224
Compare

Single swing gate opener -Key Automation RAY2224

,
$1,032.70

Ship or pick up from our office.

Product Sheet PDF

Single swing gate opener -Key Automation RAY2224

*Suitable gate weight: Maximum 500 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
Add to wishlist
Add to cart
Quick view

Related products

Wireless Keypad Access Control KW200
Compare

Wireless Keypad Access Control KW200

$127.80

Wireless Keypad Access Control KW200

Wireless keypad access control systems replace traditional keys with a digital PIN code entry for building access, eliminating the need for physical keys and enhancing security.
These systems often include features like remote management via smart devices, audit trails of access events, and integration with other security systems like intercoms. 
Here's a more detailed breakdown:
Core Functionality:
  • Keyless Entry:
    Users enter a unique PIN code into a keypad to unlock a door or gate. 
  • Wireless Communication:
    The keypad communicates wirelessly with a receiver or controller, eliminating the need for extensive wiring. 
  • Remote Management:
    Many systems allow administrators to manage access permissions, view audit trails, and adjust settings remotely via a smartphone app or computer. 
  • Integration:
    Some systems can integrate with intercoms, surveillance cameras, and other security components for a more comprehensive solution. 
Key Features:
  • PIN Codes: Users are assigned unique PIN codes for entry. 
  • Proximity Cards/Fobs: Some systems also support access via proximity cards or fobs for users who prefer that method. 
  • Audit Trails: The system can record and store data about who accessed the door, when, and how, providing a valuable security record. 
  • Weatherproof and Durable: Many outdoor keypads are designed to withstand harsh weather conditions and vandalism. 
  • Backlit Keypads: Backlit keypads make it easier to use the system in low-light conditions. 
Types of Wireless Keypad Access Control:
  • Stand-Alone Systems: These systems are self-contained and don't require connection to a central system. 
  • Integrated Systems: These systems are part of a larger access control or building management system. 
  • Wired and Wireless Hybrid: Some systems combine wired and wireless components for added flexibility. 
Benefits:
  • Enhanced Security: Eliminates the risk of lost or stolen keys.
  • Increased Convenience: Users don't need to carry keys.
  • Improved Auditability: Tracks access events for security monitoring.
  • Remote Management: Allows for easy administration and control. 
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view
Exit Button SQTPB801
Compare

Exit Button SQTPB801

$22.85

Ship or pick up from our office.

Exit Button SQTPB801

*Touch *Backlight *DC 12V *COM-NC-NO
An Exit push button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms. 
Here's a more detailed explanation:
  • Function:
    An exit push button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit. 
  • Purpose:
    They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available. 
  • Types:
    Exit push buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them. 
  • Importance:
    These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals. 
  • Applications:
    Exit push buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities. 
Add to wishlist
Add to cart
Quick view
Wired exit push button SQTPB701H
Compare

Exit Push Button SQTPB701H

$29.75

Ship or pick up from our office.

Exit Push Button SQTPB701H

*No Touch *Backlight *DC 12V *COM-NC-NO
A wave exit push button, also known as a touchless exit button or wave-to-exit switch, is a device that allows users to open a door without physically touching it.
It uses motion sensing technology, typically infrared or microwave, to detect a hand gesture and trigger the door to open. This provides a more hygienic and convenient way to exit a space, especially in environments where minimizing physical contact is desirable. 
Here's a more detailed explanation:
Functionality:
  • Touchless Activation:
    The core function is to activate a door release mechanism (like a magnetic lock or strike) with a simple wave of the hand. 
  • Motion Sensing:
    Wave exit buttons utilize sensors (infrared or microwave) to detect the movement of a hand or object in front of the device. 
  • Contactless Exit:
    This eliminates the need to physically push a button, reducing the spread of germs and providing a more hygienic exit solution. 
Common Applications:
  • Healthcare facilities: Hospitals, clinics, and laboratories where hygiene is paramount. 
  • Food service and preparation areas: Restaurants and kitchens where cleanliness is crucial. 
  • High-traffic areas: Office buildings, schools, and public spaces where many people need to exit frequently. 
  • Disabled access: Provides a convenient and accessible way for individuals with mobility limitations to exit. 
Benefits:
  • Hygiene:
    Reduces the risk of spreading germs and viruses by eliminating the need to touch a button. 
  • Convenience:
    Allows for hands-free operation, making it easier to exit with arms full or for individuals with mobility limitations. 
  • Durability:
    Often more durable than traditional push buttons due to fewer moving parts. 
  • Accessibility:
    Provides a more inclusive exit solution for all individuals. 
Add to wishlist
Add to cart
Quick view
Gate Opener Remote Control -C4
Compare

Gate Opener Remote Control -C4

$39.85

Ship or pick up from our office.

Gate Opener Remote Control -C4

*433 MHz *2-4 Buttons *More than 10 different designs
Key features and functions of a gate opener remote control:
  • Remote Operation:
    Enables opening and closing the gate from a distance, typically within a certain range (e.g., 100 feet). 
  • Radio Signal Transmission:
    Emits a radio signal to the gate's receiver unit, initiating the gate's movement. 
  • Compatibility:
    Most remotes are compatible with specific gate openers and require the same frequency to function. 
  • Programming:
    Can be programmed with the gate's receiver unit, often involving a "learn" or "program" button on the gate opener. 
  • Multiple Remotes:
    Many gate openers can be paired with multiple remotes, allowing multiple users to control the gate. 
  • Universal Remotes:
    Some universal remotes can be programmed to work with different gate opener brands, as long as they are compatible. 
  • Safety Features:
    Some gate openers incorporate safety features like sensors that detect obstructions and reverse the gate's movement. 
Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Safety Sensor S300
Compare

Safety Sensor S300

$21.35

Ship or pick up from our office.

Safety Sensor S300

A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Keypad Access Control V2000
Compare

Keypad Access Control K110V2000

$96.05

Keypad Access Control K110V2000

The Keypad Access Control K110V2000 is a standalone access control system designed for single-door access, typically used for residential or small-to-medium commercial buildings.
It allows users to unlock the door using either a proximity card, a PIN code, or a combination of both. 
Here's a more detailed breakdown:
Key Features:
  • Multiple User Capacity: It can support up to 1000 users. 
  • Multiple Access Methods: Users can unlock the door using RFID cards, PIN codes, or both. 
  • Standalone Operation: It functions independently, without needing to be connected to a central computer. 
  • Wiegand Input/Output: It can connect to an external card reader (Wiegand 26 input) and a controller (Wiegand 26 output). 
  • Tamper Alarm: Includes a tamper alarm for added security. 
  • Backlit Keypad: The keypad is backlit, making it easier to use in low-light conditions. 
  • Short Circuit Protection: The output is automatically turned off if there's a short circuit in the electric lock or alarm output. 
  • Waterproof: Some models, like the V2000-C, are waterproof, making them suitable for outdoor use. 
  • Easy Installation and Programming: The system is designed for straightforward installation and programming. 
  • Doorbell Input: Some models include a doorbell input. 
  • Adjustable Settings: Features like door output time, alarm time, and door open time can be adjusted. 
Applications:
  • Residential Buildings: Ideal for controlling access to apartments or individual homes.
  • Small to Medium Businesses: Suitable for offices, shops, and other commercial spaces.
  • Warehouses and Factories: Can be used to manage access to secure areas.
  • Other Applications: Laboratories, banks, and even prisons. 
Add to wishlist
Add to cart
Quick view