Pedestrian gate manual lock (One side key)
Pedestrian gate manual lock (One side key)
Pedestrian gate manual lock (One side key)
Click to enlarge
Pedestrian gate manual lock (One side key)
Pedestrian gate manual lock (One side key)
Pedestrian gate manual lock (One side key)
PIR Infrared Sensor – wired
PIR Infrared Sensor – wired $69.95
Back to products
Safety sensor - BFT FL130
Safety sensor - BFT FL130 $167.85

Pedestrian gate manual lock (One side key)

$55.75

Ship or pick up from our office.

Pedestrian gate manual lock (One side key)

A “pedestrian gate manual lock (one side key)” refers to a type of locking mechanism for a gate that is operated manually and requires a key to unlock it from one side, while the other side allows for easy exit without a key.

Here’s a breakdown of its key features:

  • Manual Operation: This lock doesn’t rely on electricity or automation. You physically use your hand to engage or disengage the locking mechanism.
  • One-Sided Key Access: The defining characteristic is that a physical key is needed to unlock the gate from one specific side (usually the exterior or entry side).
  • Easy Exit (Thumb-Turn, Latch, or Push Pad): On the interior or exit side, there’s typically a simple mechanism like a thumb-turn, lever, push pad, or a basic latch that allows for quick and easy opening without needing a key. This is often a safety feature, especially for emergency exits.
  • Security: It provides a basic level of security, preventing unauthorized entry from the keyed side.
  • Power Independence: Since it’s manual, it’s not affected by power outages.
  • Common Use Cases: These locks are frequently found on garden gates, backyard gates, pool gates, and other pedestrian access points where controlled entry is desired but a quick exit is also necessary.

In essence, it’s a practical and straightforward locking solution for gates where you want to control who comes in, but allow anyone inside to easily get out.

Compare
Add to wishlist
Category: Tags: , , , , ,
Description

Pedestrian gate manual lock (One side key)

A pedestrian gate manual lock is a locking mechanism for pedestrian gates that is operated by hand using a key or combination, rather than relying on electricity or automation. It provides a simple and reliable way to secure a gate that is opened and closed manually. 

Key Features and Functions:
  • Manual Operation:

    Unlike electric or automatic locks, a manual lock requires a user to physically turn a key or enter a combination to open or close the gate. 

  • Security:

    Manual locks provide a secure way to restrict access to a property or area, preventing unwanted entry. 

  • Power Independence:

    Because they don’t rely on electricity, manual locks are unaffected by power outages or system malfunctions. 

  • Durability:

    Often made of sturdy materials, manual locks are known for their durability and resistance to tampering. 

  • Examples:

    These locks can be found on various types of pedestrian gates, including those for swimming pools, playgrounds, and other access points. 

  • Integration with Automated Systems:

    When used with automated gates, manual locks may need to be manually unlocked before the automatic opener can function. 

  • Keyed or Combination Access:

    Manual locks can be operated with a physical key or a combination, offering different levels of security and convenience. 

  • Common Use Cases:

    They are ideal for securing gates where manual operation is sufficient and where power reliability is a concern. 

  • Variety of Designs:

    Manual locks come in various designs and styles to suit different gate types and security needs. 

  • Cost-effective:
    Generally, manual locks are more budget-friendly than automated or electric locking systems. 
Additional information
Weight 0.6 kg
Dimensions 18 × 9 × 9 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Pedestrian gate manual lock (One side key)”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Swing gate adjustable hinge
Compare

Swing gate adjustable hinge

$17.35

Ship or pick up from our office.

Swing gate adjustable hinge

*Steel material *Heavy-duty hinge *5-1/2” Length (Total 7-1/2”) x 4-1/2” Width *Bolt thickness: 3⁄4”
Add to wishlist
Add to cart
Quick view
Pedestrian Gate Hinges
Compare

Pedestrian Gate Hinges

$13.35

Ship or pick up from our office.

Pedestrian Gate Hinges

Pedestrian gate hinges are designed to allow a gate intended for pedestrian use to swing open and closed, connecting the gate to its post or frame.
These hinges are crucial for the smooth operation and secure closure of the gate, ensuring proper alignment and functionality. They can be surface-mounted, bolt-on, or weld-on, and may include features like spring-assist or adjustable tension for self-closing. 
Here's a more detailed breakdown:
  • Function:
    Pedestrian gate hinges primarily serve to join the gate to its supporting structure (post or frame) and allow for rotation. 
  • Types:
    They can be surface-mounted, bolt-on, or weld-on, offering different installation methods. 
  • Features:
    Some hinges incorporate self-closing mechanisms, like spring-assist or adjustable tension, which can be important for safety or convenience. 
  • Materials:
    They are commonly made from steel, stainless steel, or polymer, ensuring durability and resistance to the elements. 
  • Applications:
    Pedestrian gate hinges are suitable for various settings, including residential, HOA, and commercial properties, especially for side gates, walkways, and restricted access enclosures. 
  • Considerations:
    When choosing hinges, factors like the gate's weight, size, and desired functionality (e.g., self-closing) should be taken into account. 
Add to wishlist
Add to cart
Quick view
Bi-Folding Gate Hardware
Compare

Bi-Folding Gate Hardware

$699.95

Ship or pick up from our office.

Bi-Folding Gate Hardware

Bi-folding gate hardware refers to the mechanical components and accessories used to construct and operate gates that fold in half when opening, allowing for more efficient use of space.
These components include hinges, rollers, pivots, guides, and other necessary parts that enable the gate to fold and unfold smoothly. 
Key Components and Features:
  • Hinges:
    These are crucial for the folding action, connecting the gate leaves and allowing them to pivot. 
  • Rollers and Guides:
    These components ensure smooth and stable movement of the gate along a track or within a frame. 
  • Drop Bolts:
    These secure the gate in the open or closed position, providing stability and preventing unwanted movement. 
  • Handles:
    These are used to manually operate the gate. 
  • Specialized Mechanisms:
    Some systems utilize geared hinges or other mechanisms to ensure smooth and reliable operation, especially for larger gates. 
Benefits of Bi-folding Gates:
  • Space Saving:
    Bi-folding gates require less space to open compared to traditional swinging gates, making them ideal for areas with limited space. 
  • Versatility:
    They can be used with gate automation systems and are suitable for various gate sizes and configurations. 
  • Enhanced Accessibility:
    Bi-folding gates provide easy access to enclosed spaces without obstructing parking or other areas. 
  • Improved Aesthetics:
    They can be designed with various styles and finishes to complement the overall aesthetic of the property. 
  • Cost-Effective:
    Bi-folding gates can be more cost-effective to automate than traditional double swing gates as they require fewer operators. 
Applications:
  • Residential driveways where space is limited.
  • Commercial and industrial properties requiring secure access.
  • Areas with challenging terrain, such as those with gravel surfaces.
  • Condominiums and other multi-unit dwellings. 
Add to wishlist
Add to cart
Quick view

Related products

Hot
swing gate opener NICE Wingo 4024
Compare

Double Swing Gate Opener NICE -Wingo 4024

,
$1,363.45

Ship or pick up from our office.

Product Sheet PDF

Double Swing Gate Opener NICE -Wingo 4024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Operators are designed to fit a wide range of settings and applications. The Double Swing Gate Opener NICE - Wingo 4024 is an electromechanical gear motor system designed for automating double swing gates. It's primarily used for residential and light industrial applications, offering a convenient and secure way to open and close gates without manual effort. Here's a breakdown of its key features and specifications: Key Features
  • Electromechanical Gear Motor: It utilizes a 24 Vdc electromechanical gear motor, known for its reliability and quiet operation.
  • Suitable for Various Gate Sizes: It can handle swing gates with individual leaves up to 2 meters in length or up to 400 kg in weight (for a gate leaf of 1 meter).
  • Surface Mounted: The system is designed for surface mounting, meaning the motors are installed directly onto the gate posts or pillars.
  • Easy Installation: Electrical connections are made from above the gear motor, simplifying the installation process.
  • User-Friendly Release: In case of a power failure, the gate can be manually unblocked and moved with a personalized Nice key or standard lock (optional).
  • Moonclever Control Unit (MC424L/MC824H): This advanced control unit offers several intelligent functions:
    • Simple Programming: Easy setup with a single button.
    • Automatic Memorization: Self-learning function for limit switches on opening and closing.
    • Anti-Crush Safety: Features a clutch with an anti-crush safety device to prevent damage or injury.
    • Obstacle Detection: Uses dual technology to detect obstacles during operation.
    • Programmable Functions: Allows for programming of pause time, pedestrian pass door function, and deceleration at the beginning and end of cycles.
    • Battery Backup Option: Can operate during power failures with optional rechargeable batteries (PS124/PS324) that fit inside the control unit.
    • Resistive Sensitive Edge Connection: Can be connected to 8.2 KOhm resistive sensitive edges for enhanced safety.
  • Durable Construction: Features tough aluminum shells with polyester paint finish, making it resistant to atmospheric agents. Internal moving parts are made of steel, light alloys, and techno-polymers for durability.
  • Mechanical Limit Switches: Includes pre-assembled mechanical limit switches for setting the open position.
Add to wishlist
Add to cart
Quick view
Sold outHot
Swing gate opener -Royalgate RGSW650
Compare

Double swing gate opener -Royalgate RGSW650

,
$644.40

Ship or pick up from our office.

Double swing gate opener -Royalgate RGSW650

The Royalgate RGSW650 is a double swing gate opener designed to automate the opening and closing of two-leaf swing gates. It is manufactured by Royal Electronics Technology Center Co. (RETCC). Here's a breakdown of its key features and specifications:
  • Type: It's an articulated arm electric gate opener. This means it uses a two-part arm with an "elbow" joint that connects the motor to the gate. This design is often easier to install compared to other types.
  • Suitable Gate Weight: It's designed for gates with a maximum weight of 200 kg per leaf. (Note: One source indicates 100 kg per leaf, while another says 200 kg. It's advisable to confirm the exact specification with the vendor).
  • Power: It can be either 120VAC or 24VDC.
  • Safety Features: Like many modern gate openers, it likely includes obstacle detection, meaning the gates will stop or reverse if they encounter an object during operation. It also typically comes with a safety sensor.
  • Included Components: A typical package includes:
    • 2 x Electromechanical arms
    • 1 x Main control board
    • 1 x Waterproof box
    • 2 x Remote controls
    • 2 x Manual release keys
    • 1 x Safety sensor
  • Installation: Articulated arm gate operators are often a good choice when the gate opener needs to be mounted on a large gate pier or pillar.
  • Additional Features (may vary by model/kit): Some models and associated accessories can offer features like Wiegand input/output for external card readers, tamper alarms, backlit keypads, short circuit protection, and adjustable settings for door output time and alarm time.
In essence, the Royalgate RGSW650 provides an automated and secure solution for residential and commercial properties with double swing gates, offering convenience and control over access.
Add to wishlist
Read more
Quick view
Sliding gate operator gear rack -SLGR41
Compare

Sliding gate operator gear rack -SLGR41

$14.45

Ship or pick up from our office.

Sliding gate operator gear rack -SLGR41

*4 Holes *Length: 1018 mm
Add to wishlist
Add to cart
Quick view
Sold outHot
Dual swing gate opener -Royalgate RGSW700
Compare

Dual swing gate opener -Royalgate RGSW700

,
$739.30

Ship or pick up from our office.

Dual swing gate opener -Royalgate RGSW700

*Suitable gate weight: Maximum 150 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Read more
Quick view
Pedestrian gate manual lock (Two-sided key)
Compare

Pedestrian gate manual lock (Two-sided key)

$83.80

Ship or pick up from our office.

Pedestrian gate manual lock (Two-sided key)

Add to wishlist
Add to cart
Quick view
Door closer
Compare

Door closer -DCL062

$72.45

Ship or pick up from our office.

Door closer -DCL062

Capacity: 75 Kg The "DCL062" appears to be a model number for a door closer manufactured by Royal Electronics Technology Center Co. A door closer is a mechanical device that automatically closes a door after it has been opened. Its primary functions include:
  • Controlled Closing: Regulates the speed and force of the door's closing action, preventing slamming and potential damage.
  • Enhanced Security: Ensures doors are properly closed and latched, improving security by preventing unauthorized entry.
  • Fire Safety: Crucial for fire doors, as it ensures the door closes completely to prevent the spread of fire and smoke.
  • Accessibility: Some models are designed to meet ADA requirements for opening force and closing speed.
  • Energy Efficiency: Helps reduce drafts and air leakage by ensuring doors close properly.
While specific detailed specifications for the "DCL062" model are not extensively available in the search results, door closers generally come with features like:
  • Adjustable Power Size: Allows for setting the closing force based on door weight and width.
  • Adjustable Sweep/Speed and Latching: Controls how quickly the door closes and how forcefully it latches.
  • Backcheck: Provides resistance to prevent the door from opening too quickly or violently.
  • Mounting Options: Can be installed in various ways (regular arm, parallel arm, top jamb, concealed, floor spring).
  • Certifications: Often tested and certified to standards like ANSI/BHMA, BS EN, or UL for performance and fire safety.
If you need very specific technical data for the DCL062, it would be best to contact Royal Electronics Technology Center Co. directly or refer to their product documentation.
Add to wishlist
Add to cart
Quick view
Sliding gate V-Groove wheels -SLGWSD410IB
Compare

Sliding gate V-Groove wheels – SLGWSD410IB

$15.95

Ship or pick up from our office.

Sliding gate V-Groove wheels - SLGWSD410IB

*Heavy-duty *Steel material *Double bearing *Interior Bracket *Max 410 Kg *98 mm Diameter x 33 mm Width
A sliding gate V-groove wheels is a type of wheel designed to roll along a V-shaped track, providing support and guidance for sliding gates, particularly those made of metal.
The V-groove in the wheel precisely matches the track, ensuring smooth, stable, and quiet operation. These wheels are often used in industrial and heavy-duty applications due to their ability to handle significant weight and resist wear. 
Here's a more detailed explanation:
  • V-Groove Design:
    The defining feature of these wheels is the V-shaped groove on their circumference. This groove fits snugly onto a corresponding V-shaped track, which can be made of angle iron or other suitable materials. 
  • Track System:
    The track is typically installed along the path where the gate will slide, providing a stable and guided surface for the wheels to roll on. 
  • Benefits:
    V-groove wheels offer several advantages, including:
    • Smooth Operation: The close fit between the wheel and track minimizes friction and vibration, resulting in smooth gate movement. 
    • Stability: The V-groove design provides excellent stability, preventing the gate from wobbling or derailing. 
    • Durability: Many V-groove wheels are made from durable materials like steel or nylon, offering good wear resistance and longevity. 
    • Load Capacity: They can handle substantial weight, making them suitable for heavy gates. 
  • Applications:
    V-groove wheels are commonly used in:
    • Industrial Gates: Supporting heavy doors in factories and warehouses. 
    • Heavy-Duty Sliding Gates: For residential and commercial properties. 
    • Automated Gates: Used in conjunction with gate operators. 
    • Other Sliding Applications: They can also be found in other applications like sliding machinery or even pet gates. 
  • Materials:
    V-groove wheels can be made from various materials, including:
    • Steel: Offers high strength and load capacity. 
    • Nylon: Provides good wear resistance and reduced noise. 
    • Polyurethane: Offers a good balance of durability and quiet operation. 
  • Installation:
    The wheels are typically mounted to the bottom of the gate, allowing them to roll along the track. 
Add to wishlist
Add to cart
Quick view
Gate drop ground latch
Compare

Gate drop ground latch

$61.70

Ship or pick up from our office.

Gate drop ground latch

A gate drop ground latch, also known as a cane bolt or drop rod, is a mechanism used to secure a gate in the open or closed position by inserting a rod into the ground.
It's typically used for double gates to keep one side stationary while the other is latched. It helps prevent gates from moving in the wind and adds extra security. 
Here's a more detailed explanation:
How it works:
  • A metal rod (the drop rod or cane bolt) is attached to the gate and slides through brackets or guides. 
  • When the gate is in the desired position (open or closed), the rod is lowered into a hole or receiver in the ground, securing the gate. 
  • To open the gate, the rod is lifted out of the ground and turned out of the way. 
Key features and benefits:
  • Secures gates: Prevents gates from swinging open or closed due to wind or other factors. 
  • Versatile: Can be used on various gate types, including wood, metal, and vinyl. 
  • Double gate support: Especially useful for securing one side of a double gate while the other is latched. 
  • Added security: Can be used in conjunction with other latches for increased security. 
  • Easy installation: Generally involves mounting brackets and drilling a hole for the rod. 
  • Durable: Made of materials like steel, often with a powder coat finish for weather resistance. 
Add to wishlist
Add to cart
Quick view