Pedestrian gate manual lock (One side key)
Pedestrian gate manual lock (One side key)
Pedestrian gate manual lock (One side key)
Click to enlarge
Pedestrian gate manual lock (One side key)
Pedestrian gate manual lock (One side key)
Pedestrian gate manual lock (One side key)
PIR Infrared Sensor – wired
PIR Infrared Sensor – wired $69.95
Back to products
Safety sensor - BFT FL130
Safety sensor - BFT FL130 $167.85

Pedestrian gate manual lock (One side key)

$55.75

Ship or pick up from our office.

Pedestrian gate manual lock (One side key)

A “pedestrian gate manual lock (one side key)” refers to a type of locking mechanism for a gate that is operated manually and requires a key to unlock it from one side, while the other side allows for easy exit without a key.

Here’s a breakdown of its key features:

  • Manual Operation: This lock doesn’t rely on electricity or automation. You physically use your hand to engage or disengage the locking mechanism.
  • One-Sided Key Access: The defining characteristic is that a physical key is needed to unlock the gate from one specific side (usually the exterior or entry side).
  • Easy Exit (Thumb-Turn, Latch, or Push Pad): On the interior or exit side, there’s typically a simple mechanism like a thumb-turn, lever, push pad, or a basic latch that allows for quick and easy opening without needing a key. This is often a safety feature, especially for emergency exits.
  • Security: It provides a basic level of security, preventing unauthorized entry from the keyed side.
  • Power Independence: Since it’s manual, it’s not affected by power outages.
  • Common Use Cases: These locks are frequently found on garden gates, backyard gates, pool gates, and other pedestrian access points where controlled entry is desired but a quick exit is also necessary.

In essence, it’s a practical and straightforward locking solution for gates where you want to control who comes in, but allow anyone inside to easily get out.

Compare
Add to wishlist
Category: Tags: , , , , ,
Description

Pedestrian gate manual lock (One side key)

A pedestrian gate manual lock is a locking mechanism for pedestrian gates that is operated by hand using a key or combination, rather than relying on electricity or automation. It provides a simple and reliable way to secure a gate that is opened and closed manually. 

Key Features and Functions:
  • Manual Operation:

    Unlike electric or automatic locks, a manual lock requires a user to physically turn a key or enter a combination to open or close the gate. 

  • Security:

    Manual locks provide a secure way to restrict access to a property or area, preventing unwanted entry. 

  • Power Independence:

    Because they don’t rely on electricity, manual locks are unaffected by power outages or system malfunctions. 

  • Durability:

    Often made of sturdy materials, manual locks are known for their durability and resistance to tampering. 

  • Examples:

    These locks can be found on various types of pedestrian gates, including those for swimming pools, playgrounds, and other access points. 

  • Integration with Automated Systems:

    When used with automated gates, manual locks may need to be manually unlocked before the automatic opener can function. 

  • Keyed or Combination Access:

    Manual locks can be operated with a physical key or a combination, offering different levels of security and convenience. 

  • Common Use Cases:

    They are ideal for securing gates where manual operation is sufficient and where power reliability is a concern. 

  • Variety of Designs:

    Manual locks come in various designs and styles to suit different gate types and security needs. 

  • Cost-effective:
    Generally, manual locks are more budget-friendly than automated or electric locking systems. 
Additional information
Weight 0.6 kg
Dimensions 18 × 9 × 9 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Pedestrian gate manual lock (One side key)”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Gate adjustable hinges
Compare

Gate adjustable hinges

$17.35

Ship or pick up from our office.

Gate adjustable hinges

*Steel material *Heavy-duty hinge *5-1/2” Length (Total 7-1/2”) x 4-1/2” Width *Bolt thickness: 3⁄4” Gate adjustable hinges are a type of hinge designed to allow for precise adjustments to a gate's position and alignment even after it has been installed. Unlike traditional fixed hinges, which offer little to no post-installation flexibility, adjustable hinges provide the ability to fine-tune the gate's fit. This feature is particularly beneficial for gates that may sag over time due to their weight, ground settling, or weather changes.   Why are Adjustable Hinges Important? Adjustable hinges solve common problems associated with gate installation and long-term use. Without them, realigning a sagging or misaligned gate often requires removing the gate, cutting, re-welding, and repainting the hinges, which is a time-consuming and labor-intensive process. With adjustable hinges, these adjustments can typically be made with simple tools like an Allen key or an adjustable wrench.   Key Features and Adjustments Adjustable hinges offer various levels of adjustment, which can include:
  • In/Out Adjustment: This is the most common adjustment, allowing the gate to be moved closer to or further away from the post. This helps eliminate gaps or prevent the gate from rubbing against the frame.
  • Up/Down Adjustment: This allows for vertical alignment, which is crucial for ensuring the gate clears the ground and for aligning the gate's lock with its strike plate, especially for double swing gates.
  • Left/Right Adjustment: Some advanced models offer lateral adjustment, providing ultimate flexibility in positioning the gate along its width. This can also help in adjusting the gate's tilt.
Many models also feature locking mechanisms, such as serrated washers or set screws, to ensure that once the adjustment is made, the gate remains securely in place.   Types of Adjustable Hinges Adjustable hinges come in various forms, often incorporating the adjustability into existing hinge designs:
  • Adjustable Eye Bolts: These are threaded components that allow vertical and horizontal adjustment, typically used with hook-on plates or gate pins.
  • Adjustable Band and Gudgeon Hinges: Similar to traditional band and gudgeon hinges, but with a threaded bolt and nuts for adjustment.
  • Weld-on Adjustable Hinges: Designed to be welded directly to metal gates and posts, offering strong support and adjustability.
  • Bolt-on Adjustable Hinges: These are bolted to the gate and post, making them suitable for various gate materials.
  • Barrel Hinges (Adjustable): Often featuring a set screw for up/down adjustments, suitable for heavier loads and offering a robust design.
  • Adjustable Self-Closing Hinges: Some adjustable hinges also incorporate a self-closing mechanism, which is ideal for security gates or areas where the gate needs to close automatically.
Advantages of Using Adjustable Hinges
  • Ease of Installation and Adjustment: They simplify the initial installation process by allowing for fine-tuning without needing to perfectly align everything from the start. Subsequent adjustments due to settling or wear are also quick and easy.
  • Longevity: By maintaining proper alignment, adjustable hinges reduce wear and tear on both the gate and the hinges themselves, extending their lifespan.
  • Enhanced Security: Proper alignment minimizes gaps around the gate, making it harder for unauthorized entry.
  • Versatility: They are available in various sizes and load capacities, suitable for everything from lightweight garden gates to heavy-duty industrial gates.
  • Reduced Maintenance Costs: The ability to easily adjust the gate's position can significantly reduce the need for costly repairs or re-installations.
  • Improved Aesthetics: Ensures the gate maintains a straight and professional appearance, avoiding unsightly sagging or misalignment.
  Materials and Finishes Adjustable hinges are manufactured from durable materials to withstand outdoor conditions and heavy use. Common materials include:
  • Steel: Strong and ideal for heavy-duty gates, often galvanized or treated to prevent rust.
  • Stainless Steel: Offers excellent corrosion resistance, making it perfect for outdoor and high-moisture environments.
  • Zinc-plated Steel: Provides a good balance of durability, cost-effectiveness, and rust protection.
  • Brass: Less strong than steel but used for decorative purposes due to its aesthetic appeal.
Finishes often include black powder-coating for a sleek look and added protection, or galvanization for superior corrosion resistance, especially in industrial or harsh weather conditions.
Add to wishlist
Add to cart
Quick view
Bi-Folding Gate Hardware
Compare

Bi-Folding Gate Hardware

$699.95

Ship or pick up from our office.

Bi-Folding Gate Hardware

Bi-folding gate hardware refers to the mechanical components and accessories used to construct and operate gates that fold in half when opening, allowing for more efficient use of space.
These components include hinges, rollers, pivots, guides, and other necessary parts that enable the gate to fold and unfold smoothly. 
Key Components and Features:
  • Hinges:
    These are crucial for the folding action, connecting the gate leaves and allowing them to pivot. 
  • Rollers and Guides:
    These components ensure smooth and stable movement of the gate along a track or within a frame. 
  • Drop Bolts:
    These secure the gate in the open or closed position, providing stability and preventing unwanted movement. 
  • Handles:
    These are used to manually operate the gate. 
  • Specialized Mechanisms:
    Some systems utilize geared hinges or other mechanisms to ensure smooth and reliable operation, especially for larger gates. 
Benefits of Bi-folding Gates:
  • Space Saving:
    Bi-folding gates require less space to open compared to traditional swinging gates, making them ideal for areas with limited space. 
  • Versatility:
    They can be used with gate automation systems and are suitable for various gate sizes and configurations. 
  • Enhanced Accessibility:
    Bi-folding gates provide easy access to enclosed spaces without obstructing parking or other areas. 
  • Improved Aesthetics:
    They can be designed with various styles and finishes to complement the overall aesthetic of the property. 
  • Cost-Effective:
    Bi-folding gates can be more cost-effective to automate than traditional double swing gates as they require fewer operators. 
Applications:
  • Residential driveways where space is limited.
  • Commercial and industrial properties requiring secure access.
  • Areas with challenging terrain, such as those with gravel surfaces.
  • Condominiums and other multi-unit dwellings. 
Add to wishlist
Add to cart
Quick view
Pedestrian Gate Hinges
Compare

Pedestrian Gate Hinges

$13.35

Ship or pick up from our office.

Pedestrian Gate Hinges

Pedestrian gate hinges are designed to allow a gate intended for pedestrian use to swing open and closed, connecting the gate to its post or frame.
These hinges are crucial for the smooth operation and secure closure of the gate, ensuring proper alignment and functionality. They can be surface-mounted, bolt-on, or weld-on, and may include features like spring-assist or adjustable tension for self-closing. 
Here's a more detailed breakdown:
  • Function:
    Pedestrian gate hinges primarily serve to join the gate to its supporting structure (post or frame) and allow for rotation. 
  • Types:
    They can be surface-mounted, bolt-on, or weld-on, offering different installation methods. 
  • Features:
    Some hinges incorporate self-closing mechanisms, like spring-assist or adjustable tension, which can be important for safety or convenience. 
  • Materials:
    They are commonly made from steel, stainless steel, or polymer, ensuring durability and resistance to the elements. 
  • Applications:
    Pedestrian gate hinges are suitable for various settings, including residential, HOA, and commercial properties, especially for side gates, walkways, and restricted access enclosures. 
  • Considerations:
    When choosing hinges, factors like the gate's weight, size, and desired functionality (e.g., self-closing) should be taken into account. 
Add to wishlist
Add to cart
Quick view

Related products

Sold outHot
Dual swing gate opener -Royalgate RGSW700
Compare

Dual swing gate opener -Royalgate RGSW700

,
$739.30

Ship or pick up from our office.

Dual swing gate opener -Royalgate RGSW700

*Suitable gate weight: Maximum 150 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Read more
Quick view
Sliding gate support roller
Compare

Sliding gate support roller

$4.95

Ship or pick up from our office.

Sliding gate support roller

Sliding gate roller guides are essential components of sliding gates that facilitate smooth and controlled movement along a track or rail.
They help the gate stay aligned, preventing it from wobbling or coming off the track during operation. These guides are typically comprised of a bracket (often L-shaped) and one or more rollers, often made of nylon, that minimize friction and ensure quiet, efficient gate movement. 

Key functions of sliding gate roller guides:

  • Smooth & Stable Movement:
    They ensure the gate slides smoothly along the track, preventing jerky movements and noise. 
  • Alignment & Stability:
    They keep the gate aligned with the track, preventing it from wobbling or falling off. 
  • Reduced Friction:
    The rollers minimize friction between the gate and the track, improving the gate's efficiency and lifespan. 
  • Enhanced Durability:
    By reducing friction and stress on the gate and its components, they contribute to the longevity of the entire system.   

Types of Sliding Gate Roller Guides:

  • L-Shaped Bracket with Rollers:
    This is a common type, featuring an L-shaped bracket that can be mounted on a post and nylon rollers that guide the gate. 
  • Cantilever Gate Rollers:
    Specifically designed for cantilever gates (those that don't require a bottom track), these rollers provide support and smooth movement. 
  • Adjustable Rollers:
    Some guides allow for horizontal adjustment of the roller position to accommodate different gate widths. 
  • Flat Mount Wheels:
    Used when there's no need for a wheel cutout, these screw directly onto the bottom rail of the gate. 

Materials and Construction:

  • Rollers:
    Typically made of nylon or other durable materials that can withstand wear and tear. 
  • Brackets:
    Often made of steel (galvanized or stainless steel) for strength and durability.

Applications:

Sliding driveway gates, Security gates, Garden gates, Barn doors, Garage doors, Sheds, and Storage spaces. 
In essence, sliding gate roller guides are critical for the proper functioning and longevity of sliding gates, ensuring smooth, reliable, and quiet operation. 
Add to wishlist
Add to cart
Quick view
Sliding gate V-Groove wheels -SLGWS800
Compare

Sliding gate V-Groove wheels -SLGWS800

$59.95

Ship or pick up from our office.

Sliding gate V-Groove wheels -SLGWS800

Sliding gate V-Groove wheels are a fundamental component in a common type of sliding gate system. Unlike cantilever gates that hang above the ground, these gates roll directly on a track installed on the ground. Here's a detailed explanation: What they are: A V-Groove wheel is a type of wheel specifically designed with a V-shaped groove machined into its circumference. This groove perfectly mates with a corresponding V-shaped track, which is usually made of angle iron or a similar steel profile. How they work:
  1. Track Installation: A V-shaped steel track is securely laid and typically anchored into the driveway or ground along the entire length of the gate's travel path. This track acts as the "railroad track" for the gate.
  2. Wheel Attachment: The V-Groove wheels are attached to the bottom frame of the sliding gate. Depending on the gate's length and weight, multiple wheels will be strategically placed along its underside.
  3. Guidance and Support: As the gate opens or closes (either manually or with a gate opener), the V-shaped groove of the wheels sits snugly onto the V-shaped track. This tight fit ensures:
    • Smooth and Stable Movement: The gate rolls smoothly and without wobbling or derailing.
    • Guidance: The wheels effectively guide the gate in a straight line, preventing it from veering off course.
    • Load Distribution: The wheels bear the weight of the gate, distributing it evenly along the track.
Key Features and Materials:
  • Materials: V-Groove wheels are typically made from durable materials to withstand heavy loads and wear:
    • Steel (most common): Offers high strength, load capacity, and durability. Often zinc-plated or galvanized for corrosion resistance.
    • Cast Iron: More economical but can be more prone to breakage than steel, and may require more frequent lubrication.
    • Nylon or High-Impact Polymer: Quieter in operation and excellent for corrosion resistance, but generally have lower load capacities than steel and may not last as long under heavy use.
  • Bearings: High-quality V-Groove wheels incorporate sealed bearings (like precision ball bearings). These reduce friction, ensure smooth rolling, and often require no lubrication, making them "maintenance-free."
  • Sizes: Available in various diameters (e.g., 3", 4", 6") and load capacities (ranging from hundreds to thousands of pounds per wheel) to suit different gate sizes and weights.
  • With or Without Brackets: Some wheels come with integrated mounting brackets for easier installation, while others are just the wheel itself, requiring a custom bracket or housing.
Benefits of V-Groove Wheels for Sliding Gates:
  • Stability and Alignment: The V-groove design provides excellent stability, keeping the gate perfectly aligned with the track and preventing it from tilting or derailing.
  • High Load Capacity: Especially steel V-Groove wheels, they are designed to handle very heavy gates, making them suitable for large residential, commercial, and industrial applications.
  • Durability and Longevity: Made from robust materials, they offer a long service life, particularly with sealed bearings.
  • Relatively Simple System: The concept is straightforward, and the components are widely available.
Considerations:
  • Ground Track Maintenance: The main drawback compared to cantilever gates is that the ground track can accumulate debris (leaves, dirt, snow, ice). This debris must be regularly cleaned to ensure smooth operation and prevent damage to the wheels or opener. In Surrey, BC's climate, this is an important consideration due to rain and potential for snow.
  • Driveway Disruption: Installing a ground track requires cutting into or modifying the driveway surface.
  • Noise: While smoother than some other wheel types, they can still produce some noise, particularly if the track is not perfectly clean or if the wheels are worn.
For gate installation companies in Surrey, BC, V-Groove wheel systems are a common offering for traditional sliding gates, especially for properties where a ground track is acceptable and the benefits of high stability and load capacity are desired.
Add to wishlist
Add to cart
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Manual release key *1 x Safety sensor
A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view
Gate drop ground latch
Compare

Gate drop ground latch

$61.70

Ship or pick up from our office.

Gate drop ground latch

A gate drop ground latch, also known as a cane bolt or drop rod, is a mechanism used to secure a gate in the open or closed position by inserting a rod into the ground.
It's typically used for double gates to keep one side stationary while the other is latched. It helps prevent gates from moving in the wind and adds extra security. 
Here's a more detailed explanation:
How it works:
  • A metal rod (the drop rod or cane bolt) is attached to the gate and slides through brackets or guides. 
  • When the gate is in the desired position (open or closed), the rod is lowered into a hole or receiver in the ground, securing the gate. 
  • To open the gate, the rod is lifted out of the ground and turned out of the way. 
Key features and benefits:
  • Secures gates: Prevents gates from swinging open or closed due to wind or other factors. 
  • Versatile: Can be used on various gate types, including wood, metal, and vinyl. 
  • Double gate support: Especially useful for securing one side of a double gate while the other is latched. 
  • Added security: Can be used in conjunction with other latches for increased security. 
  • Easy installation: Generally involves mounting brackets and drilling a hole for the rod. 
  • Durable: Made of materials like steel, often with a powder coat finish for weather resistance. 
Add to wishlist
Add to cart
Quick view
Sliding gate operator gear rack -SLGR2
Compare

Sliding gate operator gear rack -SLGR2

$9.55

Ship or pick up from our office.

Sliding gate operator gear rack -SLGR2

The Sliding Gate Operator Gear Rack SLGR2 is a specific type of toothed bar used in conjunction with a sliding gate operator (motor) to convert its rotational power into the linear motion needed to open and close a sliding gate. Let's break down what SLGR2 likely refers to and its characteristics: Function of a Gear Rack:
  • Linear Motion: The Sliding Gate Operator Gear Rack SLGR2 is essentially a straight "rack" of teeth that meshes with a small circular gear called a pinion, which is attached to the shaft of the sliding gate operator's motor.
  • Power Transmission: As the pinion spins, its teeth engage with the teeth of the gear rack, pushing or pulling the gate horizontally along its track. This is how the motor physically moves the gate.
Key Features of the SLGR2 Gear Rack: Based on the search results, particularly from Royal Gate (which operates in Surrey, BC):
  • Length: The Sliding Gate Operator Gear Rack SLGR2 is specified as being 340 mm (millimetres) in length. This is a relatively short segment. Sliding gates often require multiple sections of gear rack to be joined together to span the entire length of the gate, as most gates are much longer than 340mm.
  • Mounting Holes: It has "2 Holes". These holes are pre-drilled for easy attachment to the bottom frame of the sliding gate using screws or bolts.
  • Material: While the exact material for this specific SLGR2 is not explicitly stated in all listings, gear racks are commonly made from:
    • Steel (most common): Offers high strength, durability, and resistance to wear, making it suitable for heavy gates and high-traffic applications. Often galvanized or treated for corrosion resistance.
    • Nylon with a Steel Core: A popular alternative. The nylon exterior provides quieter operation and good corrosion resistance, while the internal steel core offers the necessary strength and stability for the gate's weight and movement. This is a good balance of properties.
    • Less commonly, other plastics or stainless steel are used for specific applications.
  • "Module": While not explicitly stated for SLGR2, gear racks (and their mating pinions) adhere to a "module" standard (e.g., Module 2, Module 4). The module defines the size of the teeth and the spacing between them, ensuring that the gear rack properly meshes with the pinion gear of the specific sliding gate operator it's intended for. The SLGR2 would have a specific module that matches the operators sold by Royal Gate.
Where you'd use it: The Sliding Gate Operator Gear Rack SLGR2 is used in conjunction with gear rack sliding gate operators. These are the most common type of automatic opener for sliding gates, where the gate itself has wheels that run on a ground track (as opposed to cantilever gates). In the context of Vancouver, BC: If you are looking for parts for a sliding gate operator system in Canada, Royal Gate is a local supplier that specifically lists the SLGR2 gear rack. This means it's a standard replacement part or component they offer for their range of sliding gate operators. When purchasing, it's crucial to ensure the SLGR2 (or any gear rack) is compatible with the "module" of your existing gate operator's pinion gear for proper meshing and operation.
Add to wishlist
Add to cart
Quick view
Sliding Gate V-Track
Compare

Sliding Gate V-Track

$140.00

Ship or pick up from our office.

Sliding Gate V-Track

NOTE: For 25 ft sliding gate V-Track, please do not make an online order.

Because of the limit of the shipping length and weight, we have to cut the full length of the product (25') to 2 x (12'-6") for pick-up from our store OR 4 x (6'-3") to send by Canada Post.

If your order requires cutting services, additional costs will apply.

To create an order for sliding gate V-Track, please send your request with the shipping address, postal code, and the length of your inquiry in the note. You will receive a quotation with the shipping costs within a maximum of one business day. A sliding gate V-track is a specific type of ground track that a sliding gate rolls on, utilizing wheels with a complementary V-shaped groove. This system is one of the most common ways to implement a sliding driveway gate, especially for residential and light commercial applications. Here's a breakdown: Purpose: The sliding gate V-track as the linear guide and support for the entire sliding gate. It ensures that the gate moves in a straight line, smoothly, and without wobbling or derailing as it opens and closes. It's an integral part of a "rolling gate" system, where the gate literally rolls on the ground. Key Characteristics and Components:
  1. V-Shape Profile: The most defining feature. The track has an inverted V-shape or a 90-degree angle (like an angle iron) with a slightly rounded top. This V-shape mates perfectly with the V-groove wheels attached to the bottom of the gate.
  2. Materials:
    • Galvanized Steel (Most Common): Highly durable, strong, and resistant to corrosion due to the galvanization process. It can handle heavy gates and high traffic volumes. Sections are typically joined together to form the required length.
    • Aluminum: Lighter weight and excellent corrosion resistance. Often used for lighter gates or in environments where rust is a major concern (like coastal areas).
  3. Installation:
    • Bolt-Down: The V-track is typically designed to be bolted securely to a concrete driveway or foundation. It has pre-drilled holes for anchor bolts. This allows for easier installation on existing concrete and simpler replacement if a section gets damaged.
    • Embeddable (Less Common for DIY): Some V-tracks are designed to be embedded directly into wet concrete during construction.
    • Level and Straight: Crucially, the V-track must be installed perfectly level and straight along the entire travel path of the gate to ensure smooth and consistent operation. Any dips, humps, or curves will cause issues with the gate's movement and can put undue strain on the gate operator and wheels.
  4. Lengths: Sliding gate V-tracks are sold in sections (e.g., 6 feet, 10 feet, 2.4 meters, 3 meters). Multiple sections are joined together using connection pins or by welding to achieve the total required length, which should be at least twice the width of the gate opening to allow the gate to fully retract.
  5. Complementary Hardware:
    • V-Groove Wheels: These are essential and roll directly on top of the V-track. As discussed previously, they have a V-shaped groove that fits snugly into the track.
    • Guide Rollers/Posts: Used at the top of the gate to keep it upright and prevent tipping.
    • Gate Stops: Installed at the ends of the track to prevent the gate from over-traveling.
Advantages of V-Track Systems:
  • Stability: The sliding gate V-track V-groove design provides excellent lateral stability, keeping the gate aligned and preventing it from wobbling.
  • Load Capacity: Due to the direct ground support and robust V-track/wheel combination, these systems can handle very heavy and long gates.
  • Simple Mechanical Principle: The system is straightforward, making it reliable.
Disadvantages/Considerations (especially in Vancouver, BC):
  • Debris Accumulation: The main drawback is that the V-track, being on the ground, is susceptible to collecting dirt, leaves, gravel, snow, and ice. This debris can obstruct the gate's movement, cause wear on the wheels, and may even lead to derailment or damage to the gate opener. Regular cleaning of the track is essential, especially during winter months in Canada.
  • Driveway Disruption: Installing a sliding gate V-track requires modifying the driveway surface, often by bolting it down or embedding it in concrete, which creates a slight raised profile.
  • Water Drainage: Proper drainage around the track is important to prevent water pooling.
In summary, a sliding gate V-track is the foundation of a ground-rolling sliding gate system, providing the precise guide and support for the gate's V-groove wheels. When considering one for a property in Surrey, BC, it's crucial to factor in the need for regular track maintenance due to local weather conditions.
Add to wishlist
Add to cart
Quick view
Cantilever Sliding Gate Hardware
Compare

Cantilever Sliding Gate Hardware

$1,144.35

Ship or pick up from our office.

Cantilever Sliding Gate Hardware

Cantilever sliding gate hardware refers to the specialized components that allow a gate to slide open and close without needing a track on the ground. Instead, the gate is supported and guided from above and to the side by a system of rollers and channels. Here's a breakdown of the essential components that make up cantilever sliding gate hardware:
  1. Cantilever Track (or Rail):
    • This is the most distinctive part. It's a heavy-duty, usually C-shaped (or sometimes a more complex extruded profile) channel that's securely attached to the bottom (or sometimes top) of the gate frame itself.
    • The track is extended beyond the main gate opening to form the "tail" or counterbalance section, which supports the gate when it's fully open.
    • Materials: Commonly made from galvanized steel for strength and corrosion resistance, or aluminum for lighter weight and superior corrosion resistance (as discussed previously).
  2. Cantilever Carriages (or Trolleys/Rollers):
    • These are the critical load-bearing components. They consist of a sturdy base plate with multiple wheels (often 5, 8, or more) arranged in a specific configuration.
    • The wheels are made from durable materials like steel (often machined or cast) or high-impact nylon, and typically feature sealed bearings for smooth, maintenance-free operation.
    • The cantilever track fits over these carriages, with the wheels rolling inside the track's channel.
    • Two (or more for very long/heavy gates) carriages are typically mounted on strong concrete foundation posts, positioned outside the gate opening. These posts support the entire weight of the gate.
  3. Guide Rollers/Plates (Upper Guides):
    • These are smaller rollers or plates mounted on a separate guide post (or posts) on the same side as the cantilever carriages.
    • Their purpose is to keep the gate upright and prevent it from tipping over as it moves. They typically engage with the top rail of the gate.
    • Made from nylon, steel, or a combination, often with adjustable brackets.
  4. End Cups / Receiver Posts / Gate Catches:
    • End Cup (or End Stop): A cup or bracket mounted on the support posts at the fully closed position. The end of the gate's tail section (specifically the track) "rests" in this cup when the gate is fully closed, providing additional stability and support.
    • Receiver Post / Gate Catch: A post or latching mechanism at the opposite end of the gate opening. When the gate is fully closed, it engages with this post to secure the gate in the closed position. This is often where a lock or the gate operator's arm connects.
    • Support Wheels / Final Wheels: Sometimes, a small support wheel is mounted on the ground or a low post at the far end of the gate opening to provide extra support to the gate's leading edge when it's fully closed, especially for very long or heavy gates.
  5. Anchoring and Installation Accessories:
    • Foundation Plates/Anchor Bolts: Heavy-duty plates and bolts used to securely anchor the cantilever carriages to concrete foundations. The stability of the entire system relies on robust anchoring.
    • Tension Bars (less common in modern designs): Historically used for minor adjustments to gate alignment or sag, though modern systems are often designed to minimize this need.
Advantages of Cantilever Hardware:
  • No Ground Track: This is the primary advantage. Eliminates the need for a track embedded in the driveway, which means:
    • No debris accumulation (leaves, dirt, snow, ice) obstructing movement.
    • Smoother operation on uneven driveways.
    • Less maintenance in terms of track cleaning.
    • No tripping hazard or wear on vehicles crossing a ground track.
  • Durability and Low Maintenance: Because the main rolling components (carriages) are elevated and enclosed within the track, they are less exposed to dirt and weather, leading to longer life and less frequent maintenance.
  • High Security: Cantilever gates are inherently very secure as they are difficult to lift or derail.
  • Aesthetics: The absence of a ground track can contribute to a cleaner, more streamlined look for the driveway entrance.
  • Suitable for High-Traffic Areas: Their robust design makes them ideal for commercial, industrial, or busy residential applications.
Suppliers in Surrey, British Columbia, Canada: For purchasing cantilever sliding gate hardware in Surrey, BC, you would typically look for:
  • Gate Automation and Supply Companies: Businesses specializing in automatic gates will carry a full range of cantilever hardware. Examples include Royal Gates (Royal Electronic Technology Center Co.), presence in the Metro Vancouver area, including Surrey.
  • Fencing and Gate Fabricators: Many companies that custom-fabricate gates will also supply or install the necessary hardware.
  • Industrial Hardware Suppliers: Larger industrial suppliers may stock components, though specialized gate companies will offer more comprehensive systems.
  • Online Retailers: Many online suppliers ship to Canada, offering a wide variety of components from different manufacturers.
When considering cantilever gate hardware, it's crucial to select components that match the weight, length, and usage frequency of your gate to ensure long-term, reliable operation.
Add to wishlist
Add to cart
Quick view