Gate adjustable hinges
Click to enlarge
Underground Swing Gate Opener -VDS RG110
Underground Dual Swing Gate Opener -VDS RG110 $2,103.60
Back to products
Swing gate opener -VDS Articulated
Single swing gate opener -VDS Articulated $1,012.30

Gate adjustable hinges

$17.35

Ship or pick up from our office.

Gate adjustable hinges

*Steel material

*Heavy-duty hinge

*5-1/2” Length (Total 7-1/2”) x 4-1/2” Width

*Bolt thickness: 3⁄4”

Gate adjustable hinges are a type of hinge designed to allow for precise adjustments to a gate’s position and alignment even after it has been installed. Unlike traditional fixed hinges, which offer little to no post-installation flexibility, adjustable hinges provide the ability to fine-tune the gate’s fit. This feature is particularly beneficial for gates that may sag over time due to their weight, ground settling, or weather changes.

 

Why are Adjustable Hinges Important?

Adjustable hinges solve common problems associated with gate installation and long-term use. Without them, realigning a sagging or misaligned gate often requires removing the gate, cutting, re-welding, and repainting the hinges, which is a time-consuming and labor-intensive process. With adjustable hinges, these adjustments can typically be made with simple tools like an Allen key or an adjustable wrench.

 

Key Features and Adjustments

Adjustable hinges offer various levels of adjustment, which can include:

  • In/Out Adjustment: This is the most common adjustment, allowing the gate to be moved closer to or further away from the post. This helps eliminate gaps or prevent the gate from rubbing against the frame.
  • Up/Down Adjustment: This allows for vertical alignment, which is crucial for ensuring the gate clears the ground and for aligning the gate’s lock with its strike plate, especially for double swing gates.
  • Left/Right Adjustment: Some advanced models offer lateral adjustment, providing ultimate flexibility in positioning the gate along its width. This can also help in adjusting the gate’s tilt.

Many models also feature locking mechanisms, such as serrated washers or set screws, to ensure that once the adjustment is made, the gate remains securely in place.

 

Types of Adjustable Hinges

Adjustable hinges come in various forms, often incorporating the adjustability into existing hinge designs:

  • Adjustable Eye Bolts: These are threaded components that allow vertical and horizontal adjustment, typically used with hook-on plates or gate pins.
  • Adjustable Band and Gudgeon Hinges: Similar to traditional band and gudgeon hinges, but with a threaded bolt and nuts for adjustment.
  • Weld-on Adjustable Hinges: Designed to be welded directly to metal gates and posts, offering strong support and adjustability.
  • Bolt-on Adjustable Hinges: These are bolted to the gate and post, making them suitable for various gate materials.
  • Barrel Hinges (Adjustable): Often featuring a set screw for up/down adjustments, suitable for heavier loads and offering a robust design.
  • Adjustable Self-Closing Hinges: Some adjustable hinges also incorporate a self-closing mechanism, which is ideal for security gates or areas where the gate needs to close automatically.

Advantages of Using Adjustable Hinges

  • Ease of Installation and Adjustment: They simplify the initial installation process by allowing for fine-tuning without needing to perfectly align everything from the start. Subsequent adjustments due to settling or wear are also quick and easy.
  • Longevity: By maintaining proper alignment, adjustable hinges reduce wear and tear on both the gate and the hinges themselves, extending their lifespan.
  • Enhanced Security: Proper alignment minimizes gaps around the gate, making it harder for unauthorized entry.
  • Versatility: They are available in various sizes and load capacities, suitable for everything from lightweight garden gates to heavy-duty industrial gates.
  • Reduced Maintenance Costs: The ability to easily adjust the gate’s position can significantly reduce the need for costly repairs or re-installations.
  • Improved Aesthetics: Ensures the gate maintains a straight and professional appearance, avoiding unsightly sagging or misalignment.

 

Materials and Finishes

Adjustable hinges are manufactured from durable materials to withstand outdoor conditions and heavy use. Common materials include:

  • Steel: Strong and ideal for heavy-duty gates, often galvanized or treated to prevent rust.
  • Stainless Steel: Offers excellent corrosion resistance, making it perfect for outdoor and high-moisture environments.
  • Zinc-plated Steel: Provides a good balance of durability, cost-effectiveness, and rust protection.
  • Brass: Less strong than steel but used for decorative purposes due to its aesthetic appeal.

Finishes often include black powder-coating for a sleek look and added protection, or galvanization for superior corrosion resistance, especially in industrial or harsh weather conditions.

1194 in stock

Compare
Add to wishlist
Category: Tags: , ,
Description

Gate adjustable hinges

The swing gate adjustable hinges are a type of hinge used on swing gates that allows for post-installation adjustments to the gate’s position and alignment.

This feature is crucial for ensuring smooth gate operation, especially as gates can settle or shift over time due to various factors like ground movement or settling. 

Key features and benefits of swing gate adjustable hinges:
  • Adjustability:

    These hinges allow for fine-tuning the gate’s vertical and horizontal alignment within the frame, compensating for any settling or shifting that may occur. 

  • Smooth Operation:

    By allowing for precise adjustments, these hinges ensure the gate swings smoothly and doesn’t bind or rub against the frame. 

  • Durability:

    Adjustable hinges are typically made from durable materials like steel to withstand frequent use and various weather conditions. 

  • Versatility:

    Adjustable hinges can be used for residential, commercial, and even industrial swing gates. 

Common types of adjustable swing gate hinges:
  • Adjustable weld-on hinges:

    These are attached to the gate and post by welding, providing a strong and permanent connection. 

  • Adjustable bolt-on hinges:

    These are attached with bolts, offering a more versatile option for different gate and post materials. 

  • Adjustable hinges with a fixing plate:

    These come with a plate that is attached to the gate or post, providing a stable base for the hinge. 

How they work:

Adjustable hinges typically feature a mechanism, like nuts or screws, that allows for small movements of the hinge components. By adjusting these mechanisms, the gate’s position can be altered to achieve proper alignment and smooth operation. For example, if the gate is slightly misaligned, the hinge can be adjusted to move the gate up, down, left, or right until it aligns correctly. 

Additional information
Weight 1 kg
Dimensions 19 × 12 × 6 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Gate adjustable hinges”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Pedestrian Gate Hinges
Compare

Pedestrian Gate Hinges

$13.35

Ship or pick up from our office.

Pedestrian Gate Hinges

Pedestrian gate hinges are designed to allow a gate intended for pedestrian use to swing open and closed, connecting the gate to its post or frame.
These hinges are crucial for the smooth operation and secure closure of the gate, ensuring proper alignment and functionality. They can be surface-mounted, bolt-on, or weld-on, and may include features like spring-assist or adjustable tension for self-closing. 
Here's a more detailed breakdown:
  • Function:
    Pedestrian gate hinges primarily serve to join the gate to its supporting structure (post or frame) and allow for rotation. 
  • Types:
    They can be surface-mounted, bolt-on, or weld-on, offering different installation methods. 
  • Features:
    Some hinges incorporate self-closing mechanisms, like spring-assist or adjustable tension, which can be important for safety or convenience. 
  • Materials:
    They are commonly made from steel, stainless steel, or polymer, ensuring durability and resistance to the elements. 
  • Applications:
    Pedestrian gate hinges are suitable for various settings, including residential, HOA, and commercial properties, especially for side gates, walkways, and restricted access enclosures. 
  • Considerations:
    When choosing hinges, factors like the gate's weight, size, and desired functionality (e.g., self-closing) should be taken into account. 
Add to wishlist
Add to cart
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Manual release key *1 x Safety sensor
A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS MP110
Compare

Dual swing gate opener -VDS MP110

,
$1,230.35

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener -VDS MP110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor The VDS MP110 is a model of electromechanical swing gate opener manufactured by VDS Automation. It's designed for automating single or double leaf swing gates, commonly used for residential and light-industrial applications. Here's a breakdown of its key features and specifications: Key Features
  • Suitable Gate Size and Weight:
    • It can handle gates with a maximum weight of up to 200 kg (per leaf).
    • It supports gate leaf lengths ranging from 1.80 meters up to 3.50 meters.
  • Durable Construction: It features a sturdy aluminum structure and a strong rolled warm shaft, indicating robust build quality for longevity.
  • Quiet Operation: The VDS MP110 is known for its very quiet operation.
  • Safety Features:
    • Anti-squashing system (EN 12453): This is a crucial safety feature that prevents the gate from exerting excessive force if it encounters an obstruction, minimizing the risk of injury or damage.
    • Slowing down function (EN 12453): This allows the gate to slow down before reaching its fully open or closed position, ensuring smoother operation and reducing impact.
    • Thermal cut-out 140°: This protects the motor from overheating.
  • Manual Release: It includes a manual release with a key, allowing you to operate the gate manually in case of a power outage.
  • Lubrication: Mechanical parts are lubricated with lithium grease to protect against corrosion, oxidation, and rust.
  • Opening Angle: It offers a 120° opening capability. Some systems can be further enhanced for a 180-degree opening with optional chain drive systems.
  • Easy Installation: It is designed for quick installation with multi-position brackets and technopolymer covers for the brackets.
  • Motor and Power: It features a high-performance electric motor and typically operates on a 120V AC power supply, though some versions may support 24V DC.
  • Limit Switches: It has a standard opening limit switch, with an optional closing limit switch.
Variants The VDS MP110 series likely includes variations with different rod stroke lengths (e.g., 300mm, 400mm, 500mm), which determine the maximum gate leaf length they can accommodate.
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS EGO110
Compare

Double swing gate opener –VDS EGO110

,
$1,181.30

Ship or pick up from our office.

Product Sheet PDF

Double swing gate opener –VDS EGO110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Safety sensor *2 x Manual release key The VDS EGO110 is a type of double swing gate opener manufactured by VDS Automation. Here's a breakdown of its key characteristics:
  • Type: It's an electromechanical operator designed for swing gates, meaning it uses an electric motor to open and close the gate leaves. It often utilizes a linear screw or ram type mechanism, pushing and pulling a piston or rotating a threaded shaft to move the gate.
  • Application: It's specifically for double swing gates, which are gates with two leaves that open and close from the center.
  • Construction: It features a sturdy aluminum structure and a stainless steel rod, designed for durability and resistance to corrosion, oxidation, and rust.
  • Gate Capacity: The VDS EGO110 is suitable for gates with a maximum leaf weight of 200 kg (approximately 440 lbs) and a maximum leaf length of 3 meters (approximately 9.8 feet) per leaf.
  • Operation:
    • It offers a 120° opening angle.
    • It can operate with either a 120V AC power supply. The 24V DC version is typically more intensive in its use frequency.
    • It has an anti-squashing system (EN 12453) and a slowing down function (EN 12453) for safety, stopping or reversing if an obstacle is detected.
    • It features quiet operation (less than 30 dBA noise level).
    • It includes a manual release with a key for operation during power outages.
    • Opening time is generally 20-25 seconds.
  • Installation: It's designed for quick installation with multi-position brackets.
  • Environmental Conditions: It's built to operate in temperatures ranging from -20°C to +55°C (-4°F to 131°F) and has an IP55 protection rating, indicating good resistance to dust and water.
  • Optional Features: Optional limit switches and a battery backup kit are available.
In essence, the double swing gate opener –VDS EGO110 is a robust and reliable choice for automating double swing gates, particularly for residential or light commercial applications where the gate size and weight are within its specified limits.
Add to wishlist
Add to cart
Quick view
swing gate opener – Key Automation RAY2224
Compare

Dual swing gate opener – Key Automation RAY2224

,
$1,471.95

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener – Key Automation RAY2224

*Suitable gate weight: Maximum 500 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety Sensor
A swing gate opener is a device that automates the opening and closing of a swing gate, typically using a motor and a control system.
It provides a convenient and secure way to control access to a property, whether residential, commercial, or industrial. These openers can be used with various gate types, including those that swing inward or outward. 
AC DIY Double Swing Gate Automation kit (GTR058) - Richmond ...
Here's a more detailed explanation:
How it works:
  • Motor:
    A motor, powered by electricity (AC or DC), provides the force to move the gate. 
  • Control System:
    A control board receives signals from a remote control, keypad, or other access control system and activates the motor accordingly. 
  • Opening Mechanism:
    Depending on the type of swing gate opener, the mechanism can be a linear arm, an articulated arm, or an underground system. 
  • Safety Features:
    Many swing gate openers include safety features like obstruction detection, which stops the gate if it encounters an obstacle during opening or closing. 
  • Emergency Release:
    An emergency release mechanism allows manual operation of the gate in case of power failure. 
Types of Swing Gate Openers:
  • Linear Arm: These are the most common type, using a linear actuator to push or pull the gate. 
  • Articulated Arm: These use a hinged arm to move the gate, reducing strain on the hinges. 
  • Underground: The motor and mechanism are installed underground, providing a more discreet appearance. 
  • Dual Swing: These openers are designed for gates that swing open from the center. 
Benefits of using a swing gate opener:
  • Convenience: Automatic opening and closing of the gate with the press of a button or remote control.
  • Security: Prevents unauthorized access to the property.
  • Enhanced Property Value: Adds a layer of sophistication and security to the property.
  • Accessibility: Can be particularly useful for people with mobility issues. 
Add to wishlist
Add to cart
Quick view

Related products

Pedestrian gate manual lock (Two-sided key)
Compare

Pedestrian gate manual lock (Two-sided key)

$83.80

Ship or pick up from our office.

Pedestrian gate manual lock (Two-sided key)

A "pedestrian gate manual lock (two-sided key)" refers to a type of gate latch or lock that can be operated and secured with a key from both sides of the gate. Here's a breakdown of what that means and why it's useful:
  • Manual Lock: This indicates that the lock is operated by hand, typically by turning a key or a knob/lever, rather than being electric or automated.
  • Two-Sided Key (or Keyed on Both Sides): This is the key feature. It means that there is a key cylinder on both the exterior and interior sides of the gate. This allows you to:
    • Lock the gate from either the inside or the outside using a key.
    • Unlock the gate from either the inside or the outside using a key.
Why is this beneficial for a pedestrian gate?
  • Convenience: You don't have to walk around the gate to unlock it if you're on the "wrong" side.
  • Security: It provides a consistent level of security from both directions, preventing unauthorized access whether someone is trying to get in from the outside or out from the inside (if that's a concern).
  • Accessibility: It can be crucial for pedestrian gates that serve as primary entry points, offering easy access for residents or authorized personnel from either side.
Types of locks that can be two-sided keyed for gates often include:
  • Deadbolt Hook Locks: These use a hook-shaped bolt that engages with a strike plate on the gate post.
  • Mortise Locks: These are installed within a pocket cut into the gate frame, offering a clean, flush appearance and good security.
  • Rim Locks: These are surface-mounted on the gate, making them easier to install.
  • Latches with an external access kit: Some general-purpose gate latches can be converted to be two-sided key-lockable with an additional kit.
When choosing such a lock, important considerations include the gate material (wood, vinyl, metal), weather resistance, ease of installation, and the level of security required.
Add to wishlist
Add to cart
Quick view
Cantilever Sliding Gate Hardware
Compare

Cantilever Sliding Gate Hardware

$1,144.35

Ship or pick up from our office.

Cantilever Sliding Gate Hardware

Cantilever sliding gate hardware refers to the specialized components that allow a gate to slide open and close without needing a track on the ground. Instead, the gate is supported and guided from above and to the side by a system of rollers and channels. Here's a breakdown of the essential components that make up cantilever sliding gate hardware:
  1. Cantilever Track (or Rail):
    • This is the most distinctive part. It's a heavy-duty, usually C-shaped (or sometimes a more complex extruded profile) channel that's securely attached to the bottom (or sometimes top) of the gate frame itself.
    • The track is extended beyond the main gate opening to form the "tail" or counterbalance section, which supports the gate when it's fully open.
    • Materials: Commonly made from galvanized steel for strength and corrosion resistance, or aluminum for lighter weight and superior corrosion resistance (as discussed previously).
  2. Cantilever Carriages (or Trolleys/Rollers):
    • These are the critical load-bearing components. They consist of a sturdy base plate with multiple wheels (often 5, 8, or more) arranged in a specific configuration.
    • The wheels are made from durable materials like steel (often machined or cast) or high-impact nylon, and typically feature sealed bearings for smooth, maintenance-free operation.
    • The cantilever track fits over these carriages, with the wheels rolling inside the track's channel.
    • Two (or more for very long/heavy gates) carriages are typically mounted on strong concrete foundation posts, positioned outside the gate opening. These posts support the entire weight of the gate.
  3. Guide Rollers/Plates (Upper Guides):
    • These are smaller rollers or plates mounted on a separate guide post (or posts) on the same side as the cantilever carriages.
    • Their purpose is to keep the gate upright and prevent it from tipping over as it moves. They typically engage with the top rail of the gate.
    • Made from nylon, steel, or a combination, often with adjustable brackets.
  4. End Cups / Receiver Posts / Gate Catches:
    • End Cup (or End Stop): A cup or bracket mounted on the support posts at the fully closed position. The end of the gate's tail section (specifically the track) "rests" in this cup when the gate is fully closed, providing additional stability and support.
    • Receiver Post / Gate Catch: A post or latching mechanism at the opposite end of the gate opening. When the gate is fully closed, it engages with this post to secure the gate in the closed position. This is often where a lock or the gate operator's arm connects.
    • Support Wheels / Final Wheels: Sometimes, a small support wheel is mounted on the ground or a low post at the far end of the gate opening to provide extra support to the gate's leading edge when it's fully closed, especially for very long or heavy gates.
  5. Anchoring and Installation Accessories:
    • Foundation Plates/Anchor Bolts: Heavy-duty plates and bolts used to securely anchor the cantilever carriages to concrete foundations. The stability of the entire system relies on robust anchoring.
    • Tension Bars (less common in modern designs): Historically used for minor adjustments to gate alignment or sag, though modern systems are often designed to minimize this need.
Advantages of Cantilever Hardware:
  • No Ground Track: This is the primary advantage. Eliminates the need for a track embedded in the driveway, which means:
    • No debris accumulation (leaves, dirt, snow, ice) obstructing movement.
    • Smoother operation on uneven driveways.
    • Less maintenance in terms of track cleaning.
    • No tripping hazard or wear on vehicles crossing a ground track.
  • Durability and Low Maintenance: Because the main rolling components (carriages) are elevated and enclosed within the track, they are less exposed to dirt and weather, leading to longer life and less frequent maintenance.
  • High Security: Cantilever gates are inherently very secure as they are difficult to lift or derail.
  • Aesthetics: The absence of a ground track can contribute to a cleaner, more streamlined look for the driveway entrance.
  • Suitable for High-Traffic Areas: Their robust design makes them ideal for commercial, industrial, or busy residential applications.
Suppliers in Surrey, British Columbia, Canada: For purchasing cantilever sliding gate hardware in Surrey, BC, you would typically look for:
  • Gate Automation and Supply Companies: Businesses specializing in automatic gates will carry a full range of cantilever hardware. Examples include Royal Gates (Royal Electronic Technology Center Co.), presence in the Metro Vancouver area, including Surrey.
  • Fencing and Gate Fabricators: Many companies that custom-fabricate gates will also supply or install the necessary hardware.
  • Industrial Hardware Suppliers: Larger industrial suppliers may stock components, though specialized gate companies will offer more comprehensive systems.
  • Online Retailers: Many online suppliers ship to Canada, offering a wide variety of components from different manufacturers.
When considering cantilever gate hardware, it's crucial to select components that match the weight, length, and usage frequency of your gate to ensure long-term, reliable operation.
Add to wishlist
Add to cart
Quick view
Sold outHot
Dual swing gate opener -Royalgate RGSW700
Compare

Dual swing gate opener -Royalgate RGSW700

,
$739.30

Ship or pick up from our office.

Dual swing gate opener -Royalgate RGSW700

*Suitable gate weight: Maximum 150 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Read more
Quick view
Sliding gate V-Groove wheels -SLGWSD410IB
Compare

Sliding gate V-Groove wheels – SLGWSD410IB

$15.95

Ship or pick up from our office.

Sliding gate V-Groove wheels - SLGWSD410IB

*Heavy-duty *Steel material *Double bearing *Interior Bracket *Max 410 Kg *98 mm Diameter x 33 mm Width
A sliding gate V-groove wheel is a type of wheel designed to roll along a V-shaped track, providing support and guidance for sliding gates, particularly those made of metal.
The V-groove in the wheel precisely matches the track, ensuring smooth, stable, and quiet operation. These wheels are often used in industrial and heavy-duty applications due to their ability to handle significant weight and resist wear. 
Here's a more detailed explanation:
  • V-Groove Design:
    The defining feature of these wheels is the V-shaped groove on their circumference. This groove fits snugly onto a corresponding V-shaped track, which can be made of angle iron or other suitable materials. 
  • Track System:
    The track is typically installed along the path where the gate will slide, providing a stable and guided surface for the wheels to roll on. 
  • Benefits:
    V-groove wheels offer several advantages, including:
    • Smooth Operation: The close fit between the wheel and track minimizes friction and vibration, resulting in smooth gate movement. 
    • Stability: The V-groove design provides excellent stability, preventing the gate from wobbling or derailing. 
    • Durability: Many V-groove wheels are made from durable materials like steel or nylon, offering good wear resistance and longevity. 
    • Load Capacity: They can handle substantial weight, making them suitable for heavy gates. 
  • Applications:
    V-groove wheels are commonly used in:
    • Industrial Gates: Supporting heavy doors in factories and warehouses. 
    • Heavy-Duty Sliding Gates: For residential and commercial properties. 
    • Automated Gates: Used in conjunction with gate operators. 
    • Other Sliding Applications: They can also be found in other applications, like sliding machinery or even pet gates. 
  • Materials:
    V-groove wheels can be made from various materials, including:
    • Steel: Offers high strength and load capacity. 
    • Nylon: Provides good wear resistance and reduced noise. 
    • Polyurethane: Offers a good balance of durability and quiet operation. 
  • Installation:
    The wheels are typically mounted to the bottom of the gate, allowing them to roll along the track. 
Add to wishlist
Add to cart
Quick view
Door closer
Compare

Door closer -DCL062

$72.45

Ship or pick up from our office.

Door closer -DCL062

Capacity: 75 Kg The "DCL062" appears to be a model number for a door closer manufactured by Royal Electronics Technology Center Co. A door closer is a mechanical device that automatically closes a door after it has been opened. Its primary functions include:
  • Controlled Closing: Regulates the speed and force of the door's closing action, preventing slamming and potential damage.
  • Enhanced Security: Ensures doors are properly closed and latched, improving security by preventing unauthorized entry.
  • Fire Safety: Crucial for fire doors, as it ensures the door closes completely to prevent the spread of fire and smoke.
  • Accessibility: Some models are designed to meet ADA requirements for opening force and closing speed.
  • Energy Efficiency: Helps reduce drafts and air leakage by ensuring doors close properly.
While specific detailed specifications for the "DCL062" model are not extensively available in the search results, door closers generally come with features like:
  • Adjustable Power Size: Allows for setting the closing force based on door weight and width.
  • Adjustable Sweep/Speed and Latching: Controls how quickly the door closes and how forcefully it latches.
  • Backcheck: Provides resistance to prevent the door from opening too quickly or violently.
  • Mounting Options: Can be installed in various ways (regular arm, parallel arm, top jamb, concealed, floor spring).
  • Certifications: Often tested and certified to standards like ANSI/BHMA, BS EN, or UL for performance and fire safety.
If you need very specific technical data for the DCL062, it would be best to contact Royal Electronics Technology Center Co. directly or refer to their product documentation.
Add to wishlist
Add to cart
Quick view
Sliding gate support roller
Compare

Sliding gate support roller

$4.95

Ship or pick up from our office.

Sliding gate support roller

Sliding gate roller guides are essential components of sliding gates that facilitate smooth and controlled movement along a track or rail.
They help the gate stay aligned, preventing it from wobbling or coming off the track during operation. These guides are typically comprised of a bracket (often L-shaped) and one or more rollers, often made of nylon, that minimize friction and ensure quiet, efficient gate movement. 

Key functions of sliding gate roller guides:

  • Smooth & Stable Movement:
    They ensure the gate slides smoothly along the track, preventing jerky movements and noise. 
  • Alignment & Stability:
    They keep the gate aligned with the track, preventing it from wobbling or falling off. 
  • Reduced Friction:
    The rollers minimize friction between the gate and the track, improving the gate's efficiency and lifespan. 
  • Enhanced Durability:
    By reducing friction and stress on the gate and its components, they contribute to the longevity of the entire system.   

Types of Sliding Gate Roller Guides:

  • L-Shaped Bracket with Rollers:
    This is a common type, featuring an L-shaped bracket that can be mounted on a post and nylon rollers that guide the gate. 
  • Cantilever Gate Rollers:
    Specifically designed for cantilever gates (those that don't require a bottom track), these rollers provide support and smooth movement. 
  • Adjustable Rollers:
    Some guides allow for horizontal adjustment of the roller position to accommodate different gate widths. 
  • Flat Mount Wheels:
    Used when there's no need for a wheel cutout, these screw directly onto the bottom rail of the gate. 

Materials and Construction:

  • Rollers:
    Typically made of nylon or other durable materials that can withstand wear and tear. 
  • Brackets:
    Often made of steel (galvanized or stainless steel) for strength and durability.

Applications:

Sliding driveway gates, Security gates, Garden gates, Barn doors, Garage doors, Sheds, and Storage spaces. 
In essence, sliding gate roller guides are critical for the proper functioning and longevity of sliding gates, ensuring smooth, reliable, and quiet operation. 
Add to wishlist
Add to cart
Quick view
Door closer
Compare

Door closer -DCL061

$63.00

Ship or pick up from our office.

Door closer -DCL061

The "Door closer -DCL061" appears to refer to a specific model of door closer, primarily offered by Royal Electronics Technology Center Co. Based on the information found, here's what we know about it:
  • Type: DCL061 is a mechanical door closer.
  • Capacity: Door closer -DCL061 has a capacity of 45 Kg, indicating it's suitable for doors up to that weight.
  • Dimensions: Door closer -DCL061 dimensions are 25 × 9 × 9 cm.
  • Purpose: Like all door closers, it's designed to automatically close a door in a controlled manner after it has been opened. This serves various purposes, including:
    • Security: Ensuring doors are not left open inadvertently.
    • Fire Safety: Crucial for fire doors to prevent the spread of fire and smoke.
    • Energy Efficiency: Helping to maintain indoor temperatures by ensuring doors close properly.
    • Accessibility and Safety: Preventing doors from slamming, reducing the risk of injury, and allowing controlled passage for individuals with limited mobility.
Add to wishlist
Add to cart
Quick view
Sliding gate operator gear rack -SLGR612
Compare

Sliding gate operator gear rack -SLGR612

$25.35

Ship or pick up from our office.

Sliding gate operator gear rack -SLGR612

*6 Holes *Length: 1018 mm The Sliding Gate Operator Gear Rack -SLGR612 is a specific type of gear rack designed to work with automatic sliding gate operators. ⚙️ It's an essential component that allows the gate motor to move the gate open and closed. Here's a breakdown of what that means: What is a Gear Rack for a Sliding Gate Operator? A gear rack is a linear component with teeth cut along its length. It acts like a long, straight gear. In the context of a sliding gate, the gear rack is attached to the bottom or side of the gate. The gate operator, which contains a motorized gear (or pinion), engages with these teeth. As the motor turns the pinion, it "walks" along the gear rack, causing the gate to slide horizontally. Key Features and Specifications of SLGR612 The sliding gate operator gear rack -SLGR612 described as a "Special Type" of gear rack, with the following known characteristics:
  • Length: 1018 mm (approximately 3.34 feet) 📏
  • Holes: It features 6 holes, likely for mounting to the gate.
  • Weight: 10 kg
  • Dimensions: 200 × 100 × 100 cm (these dimensions seem to refer to the packaging or a larger kit, not just the rack itself, which is a common occurrence in product listings).
  • Material: While not explicitly stated for SLGR612, gear racks are commonly made from galvanized steel for heavy-duty applications or nylon reinforced with a steel core for quieter operation and lighter gates. Heavy gates typically use steel racks.
Importance in Gate Automation Gear racks are crucial for sliding gate automation because they provide:
  • Smooth and Reliable Operation: The precise engagement between the pinion and the rack teeth ensures consistent and smooth movement of the gate.
  • Durability: Made from robust materials, they withstand daily use and varying weather conditions.
  • Enhanced Security: The mechanical linkage makes it difficult to force the gate open manually without the operator's input.
  • Convenience: They enable the automated opening and closing of gates via remote controls, keypads, or other access control systems.
The SLGR612, like other gear racks, is a vital part of a sliding gate operator system, converting the rotary motion of the motor into the linear motion needed to open and close the gate.
Add to wishlist
Add to cart
Quick view