Gate Rubber Stopper A1
Click to enlarge
Underground Swing Gate Opener -VDS RG110
Underground Dual Swing Gate Opener -VDS RG110 $2,103.60
Back to products
Swing gate opener -VDS Articulated
Single swing gate opener -VDS Articulated $1,012.30

Gate Rubber Stopper A1

$39.95

Ship or pick up from our office.

Gate Rubber Stopper A1

Types of Rubber Stoppers:
  • Fixed rubber stoppers: Permanently installed, often used for heavier gates.
  • Adjustable rubber stoppers: Allow for customization of the gate’s swing position.
  • Spring-loaded rubber stoppers: Combine a spring mechanism with the rubber for enhanced shock absorption and noise reduction.
  • Floor-mounted rubber stoppers: Attached to the floor to stop the gate’s movement. 
Where they are used:
  • Swing gates:

    Commonly used to prevent swing gates from hitting walls, posts, or other structures. 

  • Sliding gates:

    Used to stop the gate at the end of its track, preventing it from rolling off. 

  • Industrial gates:

    Used in various industrial settings for gates that experience frequent and forceful use. 

  • Residential gates:
    Used in homes to protect gates, walls, and prevent accidents. 

498 in stock

Compare
Add to wishlist
Category:
Description

Gate Rubber Stopper A1

A gate rubber stopper is a device, typically made of rubber, used to stop a gate from swinging too far or slamming against a hard surface, preventing damage to the gate, hinges, latch, or surrounding structures.
Gate rubber stopper acts as a buffer, absorbing the impact and reducing noise.
A rubber stopper is highly recommended for a double swing gate.
A gate rubber stopper is installed in the middle of the driveway to support the gate, and this gate on windy days, the gate opener, hinges, posts, and welded brackets have no shakes at all and have never been broken.
Here’s a more detailed explanation:
Purpose:
  • Prevent damage:
    Rubber stoppers protect gates, latches, and hinges from the stress of forceful closing or swinging against a hard surface.
  • Reduce noise:
    They absorb the impact of the gate, minimizing the loud slamming sound.
  • Enhance safety:
    By preventing gates from swinging too far, they can also help avoid accidental injuries.
  • Extend lifespan:

    By reducing wear and tear, rubber stoppers contribute to the longevity of the gate system. 

Additional information
Weight 0.3 kg
Dimensions 9 × 10 × 6 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Gate Rubber Stopper A1”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Swing gate opener -Zero ZSW400
Compare

Dual swing gate opener -Zero ZSW400

,
$1,237.15

Ship or pick up from our office.

Dual swing gate opener -Zero ZSW400

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view
Swing gate opener -V2 Calypso
Compare

Dual Swing Gate Opener –V2 Calypso

,
$1,388.75

Ship or pick up from our office.

Product Sheet PDF

Dual Swing Gate Opener –V2 Calypso

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS MP110
Compare

Dual swing gate opener -VDS MP110

,
$1,230.35

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener -VDS MP110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view
Swing Gate Opener –Key Automation STAR3024
Compare

Dual Swing Gate Opener –Key Automation STAR3024

,
$1,257.35

Ship or pick up from our office.

Product Sheet PDF

Dual Swing Gate Opener –Key Automation STAR3024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor

TECHNICAL FEATURES

Speed cm/s 2,5
90° Opening time s 18-25
Force N 1400
Duty cycle percentage % 80
Control unit CT20224
Voltage Vdc 24
Nominal current A 3,5
Nominal power W 85
Appliance isolation class III
Degree of protection IP 54
Dimensions (L - D - H) mm 741 - 115 - 177
Item kg 9,24
Minimum operating temperature °C -20
Max operating temperature °C +55
Max leaf weight kg 400
Max leaf length m 3
Add to wishlist
Add to cart
Quick view
Dual swing gate opener –HiGate HGSW950
Compare

Dual swing gate opener –HiGate HGSW950

,
$994.55

Ship or pick up from our office.

Dual swing gate opener –HiGate HGSW950

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Manual release key *1 x Safety sensor
A dual swing gate opener is a motorized system designed to automatically open and close a double swing gate, which consists of two gate panels that meet in the middle.
Each gate panel has its own opener mechanism, allowing them to swing open in opposite directions simultaneously. This setup is common for driveways and other entry points where a wider opening is needed without requiring a single, longer gate. 
Here's a more detailed explanation:
  • Dual Swing Gates:
    These gates have two leaves or panels that swing open, typically inward or outward, to create an opening. 
  • Dual Opener Mechanisms:
    Each leaf of the gate is equipped with its own opener mechanism, which is usually an arm that pushes or pulls the gate. 
  • Synchronized Movement:
    The two opener mechanisms are designed to work together, opening and closing the gate leaves in a coordinated and synchronized manner. 
  • Applications:
    Dual swing gate openers are commonly used for driveways, parking lots, and other areas where a wide opening is needed and a single gate might be too large or impractical. 
  • Benefits:
    They offer space efficiency as they require less space to swing open compared to a single, long gate. They can also provide a more elegant and sophisticated look to the entrance. 
Add to wishlist
Add to cart
Quick view

Related products

Sold out
Sliding gate operator chain
Compare

Sliding gate operator chain

$94.95

Ship or pick up from our office.

Sliding gate operator chain

*Length: 10 Feet
A sliding gate operator chain is a specialized type of chain used in automated sliding gates to connect the gate to the motor, enabling the gate to open and close smoothly.
It acts as the mechanical link between the motor's drive system and the gate, facilitating the gate's horizontal movement along a track. 
Add to wishlist
Read more
Quick view
Sliding gate operator gear rack
Compare

Sliding gate operator gear rack -SLGR611

$20.25

Ship or pick up from our office.

Sliding gate operator gear rack -SLGR611

*6 Holes *Length: 1018 mm
Add to wishlist
Add to cart
Quick view
Telescopic sliding gate hardware
Compare

Telescopic sliding gate hardware

$392.25

Ship or pick up from our office.

Telescopic sliding gate hardware

Telescopic sliding gate hardware refers to the specialized components and kits used to construct and operate a telescopic sliding gate system. Unlike a traditional single-leaf sliding gate, a telescopic gate consists of multiple gate leaves (typically two or three) that slide and overlap each other as they open, significantly reducing the amount of "run-off" space required for the gate to retract. This makes them ideal for properties with limited lateral space. Here's a breakdown of the key hardware components and how they work: How a Telescopic Sliding Gate Works: The core principle behind a telescopic gate is the synchronized movement of its multiple leaves. This is typically achieved through a cable and pulley system or a geared track system.
  • Cable and Pulley System: This is a common method. When the primary gate leaf (the one directly driven by a motor or moved manually) begins to open, a series of cables and pulleys pull the secondary and tertiary leaves along parallel tracks. The cables are strategically routed so that each subsequent leaf moves at a faster rate, allowing them to stack neatly behind the primary leaf when fully open.
  • Geared Track System: Some advanced systems use a geared track where a pinion on one gate leaf engages with a rack on the next, driving it along.
Key Hardware Components:
  1. Gate Leaves: These are the individual sections of the gate. They are designed to slide smoothly past each other.
  2. Tracks:
    • Ground Tracks: Parallel tracks are installed on the ground for each gate leaf to slide on.
    • Upper Guide Profile/Track: A top guide system is crucial for stability and smooth movement, preventing the gate leaves from wobbling or derailing.
  3. Wheels: Each gate leaf has wheels (often V-groove or round groove) that run along the ground tracks. These are typically heavy-duty to support the weight of the gate.
  4. Pulley System/Transmission Unit: This is the heart of the telescopic mechanism. It includes:
    • Pulleys: Used to route and guide the steel cables.
    • Steel Cables: Connect the gate leaves, ensuring synchronized movement.
    • Cable Covers/Casings: Protect the cables and provide a neat appearance.
    • Adjustable Pulley Systems/Tensioners: Allow for precise adjustment of cable tension to ensure smooth operation and prevent stretching over time.
    • Connection Brackets/Couplers: Connect the cables to the gate leaves.
  5. Guide Brackets/Rollers: These are installed at the top of the gate or on a support post to keep the gate leaves aligned and stable as they move. They often feature nylon rollers to reduce friction and noise.
  6. Gate Stops and Receivers: To define the fully open and closed positions and secure the gate when closed.
  7. Gear Rack (for automated gates): If the gate is automated, a gear rack will be installed on the primary gate leaf, which engages with a pinion on the gate motor.
  8. Gate Motor (for automated systems): A powerful sliding gate motor is required, often a low-voltage DC motor with advanced electronics to handle the varying speeds and loads of the multiple leaves. A speed reduction gearbox may also be incorporated for safety.
Advantages of Telescopic Sliding Gates:
  • Space-Saving: The primary advantage, as they require significantly less run-off space than single-leaf sliding gates.
  • Wider Opening: Allows for a wider clear opening in situations where space limitations would otherwise restrict it.
  • Faster Operation: Can often open and close more quickly than a single, very large sliding gate.
  • Aesthetics: Can be a more visually appealing solution for properties with limited space.
Considerations:
  • Complexity: More complex to design and install than a standard sliding gate due to the synchronized movement.
  • Maintenance: Requires regular lubrication and checking of the cable and pulley system to ensure smooth and reliable operation.
  • Weight Distribution: Proper engineering is crucial to distribute the weight of multiple gate leaves evenly and ensure stability.
In essence, telescopic sliding gate hardware provides the mechanical framework and control mechanisms to create a highly efficient and space-saving gate solution.
Add to wishlist
Add to cart
Quick view
Pedestrian Gate Hinges
Compare

Pedestrian Gate Hinges

$13.35

Ship or pick up from our office.

Pedestrian Gate Hinges

Pedestrian gate hinges are designed to allow a gate intended for pedestrian use to swing open and closed, connecting the gate to its post or frame.
These hinges are crucial for the smooth operation and secure closure of the gate, ensuring proper alignment and functionality. They can be surface-mounted, bolt-on, or weld-on, and may include features like spring-assist or adjustable tension for self-closing. 
Here's a more detailed breakdown:
  • Function:
    Pedestrian gate hinges primarily serve to join the gate to its supporting structure (post or frame) and allow for rotation. 
  • Types:
    They can be surface-mounted, bolt-on, or weld-on, offering different installation methods. 
  • Features:
    Some hinges incorporate self-closing mechanisms, like spring-assist or adjustable tension, which can be important for safety or convenience. 
  • Materials:
    They are commonly made from steel, stainless steel, or polymer, ensuring durability and resistance to the elements. 
  • Applications:
    Pedestrian gate hinges are suitable for various settings, including residential, HOA, and commercial properties, especially for side gates, walkways, and restricted access enclosures. 
  • Considerations:
    When choosing hinges, factors like the gate's weight, size, and desired functionality (e.g., self-closing) should be taken into account. 
Add to wishlist
Add to cart
Quick view
Gate drop ground latch
Compare

Gate drop ground latch

$61.70

Ship or pick up from our office.

Gate drop ground latch

A gate drop ground latch, also known as a cane bolt or drop rod, is a mechanism used to secure a gate in the open or closed position by inserting a rod into the ground.
It's typically used for double gates to keep one side stationary while the other is latched. It helps prevent gates from moving in the wind and adds extra security. 
Here's a more detailed explanation:
How it works:
  • A metal rod (the drop rod or cane bolt) is attached to the gate and slides through brackets or guides. 
  • When the gate is in the desired position (open or closed), the rod is lowered into a hole or receiver in the ground, securing the gate. 
  • To open the gate, the rod is lifted out of the ground and turned out of the way. 
Key features and benefits:
  • Secures gates: Prevents gates from swinging open or closed due to wind or other factors. 
  • Versatile: Can be used on various gate types, including wood, metal, and vinyl. 
  • Double gate support: Especially useful for securing one side of a double gate while the other is latched. 
  • Added security: Can be used in conjunction with other latches for increased security. 
  • Easy installation: Generally involves mounting brackets and drilling a hole for the rod. 
  • Durable: Made of materials like steel, often with a powder coat finish for weather resistance. 
Add to wishlist
Add to cart
Quick view
Door closer
Compare

Door closer -DCL062

$72.45

Ship or pick up from our office.

Door closer -DCL062

Capacity: 75 Kg The "DCL062" appears to be a model number for a door closer manufactured by Royal Electronics Technology Center Co. A door closer is a mechanical device that automatically closes a door after it has been opened. Its primary functions include:
  • Controlled Closing: Regulates the speed and force of the door's closing action, preventing slamming and potential damage.
  • Enhanced Security: Ensures doors are properly closed and latched, improving security by preventing unauthorized entry.
  • Fire Safety: Crucial for fire doors, as it ensures the door closes completely to prevent the spread of fire and smoke.
  • Accessibility: Some models are designed to meet ADA requirements for opening force and closing speed.
  • Energy Efficiency: Helps reduce drafts and air leakage by ensuring doors close properly.
While specific detailed specifications for the "DCL062" model are not extensively available in the search results, door closers generally come with features like:
  • Adjustable Power Size: Allows for setting the closing force based on door weight and width.
  • Adjustable Sweep/Speed and Latching: Controls how quickly the door closes and how forcefully it latches.
  • Backcheck: Provides resistance to prevent the door from opening too quickly or violently.
  • Mounting Options: Can be installed in various ways (regular arm, parallel arm, top jamb, concealed, floor spring).
  • Certifications: Often tested and certified to standards like ANSI/BHMA, BS EN, or UL for performance and fire safety.
If you need very specific technical data for the DCL062, it would be best to contact Royal Electronics Technology Center Co. directly or refer to their product documentation.
Add to wishlist
Add to cart
Quick view
Sliding gate operator gear rack -SLGR612
Compare

Sliding gate operator gear rack -SLGR612

$25.35

Ship or pick up from our office.

Sliding gate operator gear rack -SLGR612

*6 Holes *Length: 1018 mm The Sliding Gate Operator Gear Rack -SLGR612 is a specific type of gear rack designed to work with automatic sliding gate operators. ⚙️ It's an essential component that allows the gate motor to move the gate open and closed. Here's a breakdown of what that means: What is a Gear Rack for a Sliding Gate Operator? A gear rack is a linear component with teeth cut along its length. It acts like a long, straight gear. In the context of a sliding gate, the gear rack is attached to the bottom or side of the gate. The gate operator, which contains a motorized gear (or pinion), engages with these teeth. As the motor turns the pinion, it "walks" along the gear rack, causing the gate to slide horizontally. Key Features and Specifications of SLGR612 The sliding gate operator gear rack -SLGR612 described as a "Special Type" of gear rack, with the following known characteristics:
  • Length: 1018 mm (approximately 3.34 feet) 📏
  • Holes: It features 6 holes, likely for mounting to the gate.
  • Weight: 10 kg
  • Dimensions: 200 × 100 × 100 cm (these dimensions seem to refer to the packaging or a larger kit, not just the rack itself, which is a common occurrence in product listings).
  • Material: While not explicitly stated for SLGR612, gear racks are commonly made from galvanized steel for heavy-duty applications or nylon reinforced with a steel core for quieter operation and lighter gates. Heavy gates typically use steel racks.
Importance in Gate Automation Gear racks are crucial for sliding gate automation because they provide:
  • Smooth and Reliable Operation: The precise engagement between the pinion and the rack teeth ensures consistent and smooth movement of the gate.
  • Durability: Made from robust materials, they withstand daily use and varying weather conditions.
  • Enhanced Security: The mechanical linkage makes it difficult to force the gate open manually without the operator's input.
  • Convenience: They enable the automated opening and closing of gates via remote controls, keypads, or other access control systems.
The SLGR612, like other gear racks, is a vital part of a sliding gate operator system, converting the rotary motion of the motor into the linear motion needed to open and close the gate.
Add to wishlist
Add to cart
Quick view
Pedestrian gate manual lock (One side key)
Compare

Pedestrian gate manual lock (One side key)

$55.75

Ship or pick up from our office.

Pedestrian gate manual lock (One side key)

A "pedestrian gate manual lock (one side key)" refers to a type of locking mechanism for a gate that is operated manually and requires a key to unlock it from one side, while the other side allows for easy exit without a key. Here's a breakdown of its key features:
  • Manual Operation: This lock doesn't rely on electricity or automation. You physically use your hand to engage or disengage the locking mechanism.
  • One-Sided Key Access: The defining characteristic is that a physical key is needed to unlock the gate from one specific side (usually the exterior or entry side).
  • Easy Exit (Thumb-Turn, Latch, or Push Pad): On the interior or exit side, there's typically a simple mechanism like a thumb-turn, lever, push pad, or a basic latch that allows for quick and easy opening without needing a key. This is often a safety feature, especially for emergency exits.
  • Security: It provides a basic level of security, preventing unauthorized entry from the keyed side.
  • Power Independence: Since it's manual, it's not affected by power outages.
  • Common Use Cases: These locks are frequently found on garden gates, backyard gates, pool gates, and other pedestrian access points where controlled entry is desired but a quick exit is also necessary.
In essence, it's a practical and straightforward locking solution for gates where you want to control who comes in, but allow anyone inside to easily get out.
Add to wishlist
Add to cart
Quick view