Door closer -DCL062

Ship or pick up from our office.

Cantilever sliding gate track

• Gate Panel: The main part of the gate that opens and closes.
• Tail Section: An extended portion of the gate that balances the main panel and runs through the support posts.
• Track (often "C-channel" or similar profile): This is the crucial part that the carriages or rollers run inside. It's typically integrated into the gate frame itself, usually along the bottom or sometimes the top of the gate structure.
• Carriages/Rollers: These are assemblies with wheels (often nylon or sealed bearings) that are securely mounted to the support posts. The gate's track slides over these carriages, allowing the gate to move.
• Guide Rollers/Posts: Additional rollers or posts that keep the gate upright and guide its movement at the top.
• Receiver Post: Where the gate latches or receives when fully closed.

1. Lightweight: Aluminum is much lighter than steel, which reduces the overall weight of the gate. This makes it easier for the gate operator (motor) to move the gate, potentially extending the operator's lifespan and reducing energy consumption.
2. Corrosion Resistance: Aluminum naturally forms a protective oxide layer, making it highly resistant to rust and corrosion. This is a major benefit, especially in areas with high humidity, rain, or salt, like coastal regions or places with harsh winters (relevant for Surrey, BC). Steel tracks often need galvanization or regular painting to prevent rust.
3. Durability: Despite being lightweight, aluminum alloys (like 6061-T6 or 6005-T5, commonly used in gates) are very strong and durable, capable of handling significant loads and regular use.
4. Low Maintenance: Due to its corrosion resistance, aluminum tracks require very little maintenance in terms of rust prevention. General cleaning to remove debris is still recommended.
5. Aesthetics: Aluminum can be finished in various ways, including powder coating in different colors, or left with a natural mill finish. This allows for greater design flexibility to match the property's aesthetics.
6. Ease of Fabrication and Installation: Aluminum is easier to cut, drill, and weld than steel, which can sometimes simplify the manufacturing and installation process. Many aluminum cantilever gate systems are modular or "knock-down," meaning they can be assembled on-site, which is beneficial for large or tall gates that are difficult to transport.

• No Ground Track: Eliminates the need for a track on the ground, which means:
  • No accumulation of debris (leaves, dirt, snow, ice) that can obstruct the gate's movement.
  • Smoother operation, even on uneven driveways.
  • Reduced wear and tear on the gate's wheels/rollers, as they are enclosed within the track.
  • No tripping hazard from a ground track.
• High Security: Cantilever gates are generally more secure than swing gates as they are harder to force open.
• Space Saving: They slide parallel to the fence line, requiring less clear space than swing gates.
• Good for High Traffic: Their robust design and often lower maintenance make them suitable for frequent use.