Programmable timer relay
Click to enlarge
Pedestrian gate manual lock (One side key)
Pedestrian gate manual lock (One side key) $55.75
Back to products
Digital programmable ON/OFF relay
Digital programmable ON/OFF relay $44.60

Programmable timer relay

$40.80

Ship or pick up from our office.

Programmable timer relay

A programmable timer relay is an electronic device that combines the functions of a timer and a relay, allowing users to set specific time delays for switching electrical circuits on or off. Essentially, it acts as an automated switch that operates based on pre-programmed time intervals. This enables the automation of various processes and equipment across a wide range of applications.

How it Works

Programmable timer relays incorporate internal circuitry (often microcontrollers or digital logic chips) that allow for precise timekeeping and control. Here’s a general overview of how they function:

  1. Control Signal: The programmable timer relay receives an input or “trigger” signal, which initiates the timing process. This signal can come from a switch, sensor, or another control device.
  2. Timing Mechanism: Once the signal is received, the internal timing mechanism begins to count down or up based on the programmed parameters.
  3. Delay Period: During this delay, the relay’s contacts remain in their initial state (either normally open or normally closed).
  4. Contact Switching: Once the programmed delay period elapses, the relay’s contacts change state, either closing to allow current to flow or opening to interrupt it.
  5. Maintaining State & Resetting: The relay maintains its new state until the input signal is removed, or a reset function is triggered. Programmable relays offer various timing modes, such as:
    • On-delay: The relay activates after a set delay once the input signal is applied.
    • Off-delay: The relay deactivates after a set delay once the input signal is removed.
    • Interval: The relay activates for a set period and then deactivates.
    • Cyclic: The relay repeatedly alternates between on and off states for specified durations.

Users can typically configure these timing modes and sequences through a digital interface, often with an LCD or LED display for easy setup and monitoring.

 

Applications

Programmable timer relays are incredibly versatile and are used in numerous applications to enhance efficiency, save energy, and improve safety:

  • Industrial Automation: They control the sequencing of machinery, conveyor belts, pumps, and other equipment in manufacturing processes, ensuring precise timing and preventing system overloads.
  • Lighting Control: Used in homes, commercial buildings, and street lighting to turn lights on and off at specific times or based on ambient light levels, optimizing energy consumption and security.
  • HVAC Systems: Regulate fan operations, compressor cycles, and defrost cycles in heating, ventilation, and air conditioning systems to maintain desired temperatures and reduce energy use.
  • Security Systems: Implement delays for door locks, alarm systems, and surveillance cameras, allowing for controlled access and scheduled activation/deactivation.
  • Pump Control: Manage water pumps, sewage pumps, and sump pumps, ensuring they operate only when needed, which conserves water and prevents pump damage.
  • Home Automation: Automate various household appliances like irrigation systems, washing machines, and dishwashers.
  • Vehicle Systems: Control functions like intermittent windshield wipers and turn signals.

 

Advantages

Programmable timer relays offer several benefits over traditional, non-programmable timer relays or complex PLC (Programmable Logic Controller) systems for certain applications:

  • Versatility and Customization: They can be programmed for various timing functions and sequences within a single unit, offering great flexibility for diverse applications.
  • Energy Savings: By automating on/off cycles and ensuring equipment runs only when necessary, they help reduce energy consumption and costs.
  • Increased Efficiency: They enable automated control of equipment and processes, improving overall operational efficiency and reducing the need for manual intervention.
  • Reduced Components and Wiring: By integrating multiple timing and switching functions into one device, they can replace several individual timers and relays, simplifying wiring, reducing component inventory, and saving space in control panels.
  • Cost-Effectiveness: For simpler automation tasks, they offer a more economical solution compared to full-fledged PLCs.
  • Ease of Use: Many programmable timer relays feature user-friendly digital interfaces or software, making them relatively easy to configure without requiring extensive programming knowledge.
  • Precise Time Control: They offer high temporal precision, with delays ranging from milliseconds to several hours.
  • Troubleshooting: Integrated displays often provide alarm messages and I/O status, simplifying troubleshooting.
Compare
Add to wishlist
Category: Tags: , , , , ,
Description

Programmable timer relay

*DC 12 V

*NC/NO

A programmable timer relay is an electronic device that combines the functionality of a timer and a relay.

It allows users to set specific time delays for switching electrical circuits on or off, enabling automation of various processes and equipment. These relays are programmable, meaning users can configure different timing modes and sequences through digital interfaces. 

Here’s a more detailed explanation:
Core Functionality:
  • Timing:

    Programmable timer relays offer a wide range of timing functions, including on-delay, off-delay, and interval timing. 

  • Relay:

    They act as a switch, controlling the flow of electrical current to connected devices based on the programmed time intervals. 

  • Programmability:

    Users can set specific on/off times, durations, and sequences through a digital interface or software, often with a display for easy configuration. 

Key Features:
  • Versatile Applications:

    Programmable timer relays are used in various applications, including industrial automation, lighting control, heating and cooling systems, and more. 

  • Energy Savings:

    By automating on/off cycles, these relays can help reduce energy consumption and costs. 

  • Increased Efficiency:

    The programmable timer relay enable automated control of equipment and processes, improving overall efficiency and reducing manual intervention. 

  • Customization:

    Programmable timer relays allow for tailored timing sequences to match specific operational needs. 

In essence, a programmable timer relay is a versatile tool that combines timing and switching capabilities, offering automation and control solutions for a wide range of applications. 
Additional information
Weight 0.08 kg
Dimensions 4 × 4 × 8 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Programmable timer relay”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view
Door Strike Lock
Compare

Door Strike Lock

$69.95

Ship or pick up from our office.

Door Strike Lock

*Fail-Secure/Fail-Safe *Capacity: 100 Kg *DC 12 V
An electric strike is an electromechanical lock release device that replaces a standard door strike plate.
It allows a door to be opened remotely, typically via an access control system, without manually retracting the latch. When activated, the electric strike releases the latch, enabling the door to be opened. 
Here's a more detailed explanation:
Functionality:
  • Replaces Standard Strike:
    Electric strikes are installed in the door frame, taking the place of the standard strike plate. 
  • Remote Release:
    They are designed to work with various access control systems, such as keypads, card readers, or intercoms. 
  • Activation:
    When an authorized signal is received (e.g., a code is entered, a card is swiped), the electric strike releases the latch, allowing the door to be opened. 
  • Fail-Safe or Fail-Secure:
    Electric strikes can be configured in either a fail-safe or fail-secure mode. 
    • Fail-safe: In this mode, the door unlocks when power is lost, making it suitable for safety applications where access is needed during power outages. 
    • Fail-secure: In this mode, the door remains locked when power is lost, requiring power to unlock, making it suitable for high-security applications. 
How it Works:
  • The electric strike contains a solenoid, which is an electromagnet.
  • When the solenoid is activated by an electrical signal, it moves a component (like an armature) that allows the latch to move freely.
  • This movement releases the door, allowing it to be opened. 
Key Differences from Other Locks:
  • Electric vs. Magnetic Locks:
    Unlike magnetic locks, which use powerful magnets to hold the door closed, electric strikes release the latch mechanism. 
  • Remote Access:
    Electric strikes offer remote access control, allowing doors to be unlocked without manual intervention. 
  • Versatility:
    They can be used with various locking mechanisms, including cylindrical, mortise, and rim exit devices. 
Common Applications:
  • Access Control:
    Electric strikes are a core component of access control systems in commercial and residential settings. 
  • Security:
    They provide a higher level of security compared to standard locks, especially when used with fail-secure configurations. 
  • Safety:
    In fail-safe configurations, they ensure safe egress during emergencies. 
  • Specific Areas:
    They are commonly found in reception areas, daycare centers, and other locations where controlled access is needed. 
Add to wishlist
Add to cart
Quick view
Delay relay 0.5 Sec - AC 24 V to AC 24 V
Compare

Delay relay 0.5 Sec – AC 24 V to AC 24 V

$42.55

Ship or pick up from our office.

Delay relay 0.5 Sec - AC 24 V to AC 24 V

delay relay 0.5 Sec - AC 24 V to AC 24 V is a type of electrical relay that introduces a 0.5-second time delay in a circuit, specifically designed to operate with a 24-volt AC (Alternating Current) power supply. This means that when the control voltage (24V AC) is applied or removed, the relay's output contacts won't change their state immediately; instead, there will be a half-second pause before they do. Here's a breakdown of what each part of the description means:
  • Delay Relay (or Time Delay Relay/Timer Relay): This is a control device that, unlike a standard relay, incorporates a timing function. It's used to control an event based on a pre-selected time interval.
  • 0.5 Sec: This specifies the duration of the time delay. In this case, it's a very short half-second delay. Time delays can range from milliseconds to hours or even days, depending on the relay.
  • AC 24 V (Input/Control Voltage): This indicates the type and voltage of the power supply required to energize the relay's coil or internal control circuitry. "AC" means Alternating Current, and "24 V" is the nominal voltage.
  • to AC 24 V (Output/Load Voltage): While not explicitly stated as "output," this implies that the relay is likely intended to switch a 24V AC load. This means the contacts within the relay are rated to handle 24V AC to control another part of the circuit or a device. It's important to note that the load voltage can sometimes be different from the control voltage, but in this specific phrasing, it suggests both are 24V AC.
How it Works A time delay relay operates using an internal timing circuit, which can be electronic (using components like capacitors, resistors, and microcontrollers) or electromechanical. When the input voltage (24V AC) is applied, the timing circuit is triggered. Once the preset delay (0.5 seconds) elapses, the relay's contacts will change their state (either closing normally open contacts or opening normally closed contacts), thereby activating or deactivating the connected load. Types of Delay Functions Delay relays come in various functions, and the "0.5 Sec - AC 24 V to AC 24 V" relay could be one of several types:
  • On-Delay (Normally-Open, Timed-Closed - NOTC): The most common type. When the control voltage is applied, the timing period begins. After 0.5 seconds, the output contacts close. The contacts remain closed as long as the control voltage is present.
  • Off-Delay (Normally-Open, Timed-Open - NOTO): When the control voltage is applied, the output contacts close immediately. When the control voltage is removed, the 0.5-second delay begins. After this delay, the contacts open.
  • One-Shot: Provides a single output pulse of a specified duration (in this case, 0.5 seconds) when triggered.
  • Repeat Cycle: Alternates between ON and OFF states for defined durations, creating a repeating cycle. This particular relay with a fixed 0.5-second delay is less likely to be a multi-function repeat cycle unless it's just one setting within a programmable unit.
To know the exact function, you'd need to consult the relay's datasheet or part number. Common Applications Delay relays are crucial in various control and automation systems where precise timing is essential. For a 0.5-second delay, typical applications might include:
  • Sequencing Operations: Ensuring one component starts or stops slightly after another in a controlled sequence.
  • Motor Control: Providing a brief delay before starting a motor (e.g., for pre-lubrication pumps to stabilize).
  • Safety Interlocks: Implementing a short delay to ensure certain conditions are met before an action can occur.
  • HVAC Systems: Timing the activation or deactivation of fans, compressors, or other components.
  • Conveyor Systems: Coordinating the starting or stopping of multiple conveyor belts to prevent material jams.
  • Lighting Control: For example, a short delay before turning on a light in a specific area
Add to wishlist
Add to cart
Quick view
Delay relay 0.5 Sec - AC 24 V to AC 24 V
Compare

Delay relay 0.5 Sec – AC 24 V to DC 12 V

$62.15

Ship or pick up from our office.

Delay relay 0.5 Sec - AC 24 V to DC 12 V

A "delay relay 0.5 Sec - AC 24 V to DC 24 V" is a time delay relay that is designed to:
  • Operate with a control voltage of 24 volts, which can be either Alternating Current (AC) or Direct Current (DC). This dual compatibility (AC/DC 24V) is a key feature, as many relays are specific to one type of current.
  • Introduce a delay of 0.5 seconds before its contacts change state. This delay can be an "on-delay" (contacts close/open after 0.5 seconds when power is applied) or an "off-delay" (contacts remain closed/open for 0.5 seconds after power is removed), or other timing functions depending on the specific relay's design.
  • Switch or control a separate circuit, which may be a 24V DC circuit. The "AC 24V to DC 24V" in the description refers to the relay's input power compatibility (it can be powered by either 24V AC or 24V DC) and its output capability (it's often used to control 24V DC loads). It is not a direct AC to DC converter for the load it's switching, but rather indicates its flexible control voltage. The relay itself doesn't convert the power; it merely switches it on or off after a delay. If the controlled circuit specifically requires DC, the relay's contacts would simply switch the 24V DC power to that circuit.
Essentially, it's a versatile timing device used in control systems.   Purpose of Time Delay Relays Time delay relays are crucial in various applications where precise timing of electrical events is required. They serve to:
  • Prevent false triggering: A brief fluctuation in voltage or a momentary signal might cause immediate activation in a standard relay. A short delay (like 0.5 seconds) can prevent such nuisance activations.
  • Create timed sequences: In automated processes, certain steps may need to occur in a specific order with set delays in between. For example, a delay relay could ensure one motor starts before another or that a safety purge cycle completes before a furnace ignites.
  • Control motor starts/stops: They can be used for "soft starting" motors, gradually increasing voltage to reduce inrush current, or for ensuring a motor has fully stopped before another action begins.
  • HVAC systems: They prevent "short cycling" of compressors, which can damage the unit, by introducing a delay between successive starts.
  • Lighting control: Ensuring lights stay on for a set period after activation (e.g., in stairwells) or controlling emergency lighting.
  • Security systems: Providing a brief delay before an alarm triggers, allowing authorized personnel to disarm the system.
Types of Time Delay Relays While the "0.5 Sec" refers to the specific delay, time delay relays come with various functions:
  • On-delay (Delay on Make): The most common type. The contacts change state only after the set time delay has elapsed after the control voltage is applied.
  • Off-delay (Delay on Break): The contacts change state immediately when the control voltage is applied, but only return to their original state after the set time delay has elapsed after the control voltage is removed.
  • Interval: The contacts change state immediately when the control voltage is applied, and then return to their original state after the set time delay.
  • Repeat Cycle: The relay continuously cycles between on and off states with specific time delays as long as the control voltage is applied.
In the case of a "delay relay 0.5 Sec", it would likely be an on-delay or interval type, but the exact function would need to be confirmed from the specific model's datasheet.   AC/DC 24V Compatibility The "AC 24 V to DC 24 V" part primarily indicates the coil voltage compatibility of the relay. Many modern time delay relays are designed to accept a wide range of input voltages, including both AC and DC, within a specified range (e.g., 24V AC/DC). This offers flexibility in wiring and application, as the relay can be integrated into systems powered by either AC or DC at that voltage level. It's important to distinguish that this relay itself is not a voltage converter (like a power supply that converts AC to DC). Instead, it's a switching device. If the circuit you are trying to control requires DC and your power source is AC, you would need a separate AC to DC power converter (like a power supply unit) to provide the 24V DC to your load, which the relay's contacts would then switch.
Add to wishlist
Add to cart
Quick view

Related products

Exit push button SQTPB701H
Compare

Exit Push Button SQTPB701H

$29.75

Ship or pick up from our office.

Exit Push Button SQTPB701H

*No Touch *Backlight *DC 12V *COM-NC-NO
A wave exit push button, also known as a touchless exit button or wave-to-exit switch, is a device that allows users to open a door without physically touching it.
It uses motion sensing technology, typically infrared or microwave, to detect a hand gesture and trigger the door to open. This provides a more hygienic and convenient way to exit a space, especially in environments where minimizing physical contact is desirable. 
Here's a more detailed explanation:
Functionality:
  • Touchless Activation:
    The core function is to activate a door release mechanism (like a magnetic lock or strike) with a simple wave of the hand. 
  • Motion Sensing:
    Wave exit buttons utilize sensors (infrared or microwave) to detect the movement of a hand or object in front of the device. 
  • Contactless Exit:
    This eliminates the need to physically push a button, reducing the spread of germs and providing a more hygienic exit solution. 
Common Applications:
  • Healthcare facilities: Hospitals, clinics, and laboratories where hygiene is paramount. 
  • Food service and preparation areas: Restaurants and kitchens where cleanliness is crucial. 
  • High-traffic areas: Office buildings, schools, and public spaces where many people need to exit frequently. 
  • Disabled access: Provides a convenient and accessible way for individuals with mobility limitations to exit. 
Benefits:
  • Hygiene:
    Reduces the risk of spreading germs and viruses by eliminating the need to touch a button. 
  • Convenience:
    Allows for hands-free operation, making it easier to exit with arms full or for individuals with mobility limitations. 
  • Durability:
    Often more durable than traditional push buttons due to fewer moving parts. 
  • Accessibility:
    Provides a more inclusive exit solution for all individuals. 
Add to wishlist
Add to cart
Quick view
Swing gate opener -Zero ZSW400
Compare

Dual swing gate opener -ZERO ZSW600

,
$1,428.70

Ship or pick up from our office.

Dual swing gate opener -ZERO ZSW600

*Suitable gate weight: Maximum 300 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view
Hot
Swing gate opener -VDS Articulated
Compare

Dual Swing Gate Opener -VDS Articulated

,
$1,442.80

Ship or pick up from our office.

Product Sheet PDF

Dual Swing Gate Opener -VDS Articulated

*Suitable gate weight: Maximum 800 Kg (Per leaf) Included: *2 x Electromechanical articulated arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Safety sensor *2 x Manual release key
A swing gate opener is a device that automates the opening and closing of a swing gate, typically using a motor and a control system.
It provides a convenient and secure way to control access to a property, whether residential, commercial, or industrial. These openers can be used with various gate types, including those that swing inward or outward. 
AC DIY Double Swing Gate Automation kit (GTR058) - Richmond ...
Here's a more detailed explanation:
How it works:
  • Motor:
    A motor, powered by electricity (AC or DC), provides the force to move the gate. 
  • Control System:
    A control board receives signals from a remote control, keypad, or other access control system and activates the motor accordingly. 
  • Opening Mechanism:
    Depending on the type of swing gate opener, the mechanism can be a linear arm, an articulated arm, or an underground system. 
  • Safety Features:
    Many swing gate openers include safety features like obstruction detection, which stops the gate if it encounters an obstacle during opening or closing. 
  • Emergency Release:
    An emergency release mechanism allows manual operation of the gate in case of power failure. 
Types of Swing Gate Openers:
  • Linear Arm: These are the most common type, using a linear actuator to push or pull the gate. 
  • Articulated Arm: These use a hinged arm to move the gate, reducing strain on the hinges. 
  • Underground: The motor and mechanism are installed underground, providing a more discreet appearance. 
  • Dual Swing: These openers are designed for gates that swing open from the center. 
Benefits of using a swing gate opener:
  • Convenience: Automatic opening and closing of the gate with the press of a button or remote control.
  • Security: Prevents unauthorized access to the property.
  • Enhanced Property Value: Adds a layer of sophistication and security to the property.
  • Accessibility: Can be particularly useful for people with mobility issues. 
Add to wishlist
Add to cart
Quick view
Gate Opener Remote Control -C4
Compare

Gate Opener Remote Control -C4

$39.85

Ship or pick up from our office.

Gate Opener Remote Control -C4

*433 MHz *2-4 Buttons *More than 10 different designs
Key features and functions of a gate opener remote control:
  • Remote Operation:
    Enables opening and closing the gate from a distance, typically within a certain range (e.g., 100 feet). 
  • Radio Signal Transmission:
    Emits a radio signal to the gate's receiver unit, initiating the gate's movement. 
  • Compatibility:
    Most remotes are compatible with specific gate openers and require the same frequency to function. 
  • Programming:
    Can be programmed with the gate's receiver unit, often involving a "learn" or "program" button on the gate opener. 
  • Multiple Remotes:
    Many gate openers can be paired with multiple remotes, allowing multiple users to control the gate. 
  • Universal Remotes:
    Some universal remotes can be programmed to work with different gate opener brands, as long as they are compatible. 
  • Safety Features:
    Some gate openers incorporate safety features like sensors that detect obstructions and reverse the gate's movement. 
Add to wishlist
Add to cart
Quick view
USB Gate Operator Remote
Compare

USB Gate Operator Remote

$107.30

USB Gate Operator Remote

A USB gate operator remote control is a device that allows you to open and close automatic gates or garage doors by plugging a USB dongle into your car's USB port and using it as a remote. USB Gate Operator Remote emits a sensing signal upon receiving a command from the USB port, which then triggers the gate opener to open or close the driveway gate. Here's a more detailed explanation: -How it works: USB Dongle: The device typically includes a small USB dongle that plugs into your car's USB port. Sensing Signal: When the USB is plugged in and the car is in the "on" mode, the dongle emits a sensing signal. Receiver: The signal is received by a unit connected to the driveway gate motor. Gate Motor Activation: The receiver then activates the gate motor, causing the driveway gate to open or close. -Key features: Dual Control Modes: Some models offer both automatic and manual modes, allowing you to operate the gate either by proximity sensing or by pressing a button on the USB dongle. Compact and Portable: The USB dongle is small and lightweight, making it easy to use and store in your car. Easy Installation: It's designed for simple plug-and-play functionality, requiring no complex setup. Replacement Accessory: It serves as a convenient replacement for traditional gate remote controls.
Add to wishlist
Add to cart
Quick view
Sold outHot
Swing gate opener -Royalgate RGSW650
Compare

Double swing gate opener -Royalgate RGSW650

,
$644.40

Ship or pick up from our office.

Double swing gate opener -Royalgate RGSW650

The Royalgate RGSW650 is a double swing gate opener designed to automate the opening and closing of two-leaf swing gates. It is manufactured by Royal Electronics Technology Center Co. (RETCC). Here's a breakdown of its key features and specifications:
  • Type: It's an articulated arm electric gate opener. This means it uses a two-part arm with an "elbow" joint that connects the motor to the gate. This design is often easier to install compared to other types.
  • Suitable Gate Weight: It's designed for gates with a maximum weight of 200 kg per leaf. (Note: One source indicates 100 kg per leaf, while another says 200 kg. It's advisable to confirm the exact specification with the vendor).
  • Power: It can be either 120VAC or 24VDC.
  • Safety Features: Like many modern gate openers, it likely includes obstacle detection, meaning the gates will stop or reverse if they encounter an object during operation. It also typically comes with a safety sensor.
  • Included Components: A typical package includes:
    • 2 x Electromechanical arms
    • 1 x Main control board
    • 1 x Waterproof box
    • 2 x Remote controls
    • 2 x Manual release keys
    • 1 x Safety sensor
  • Installation: Articulated arm gate operators are often a good choice when the gate opener needs to be mounted on a large gate pier or pillar.
  • Additional Features (may vary by model/kit): Some models and associated accessories can offer features like Wiegand input/output for external card readers, tamper alarms, backlit keypads, short circuit protection, and adjustable settings for door output time and alarm time.
In essence, the Royalgate RGSW650 provides an automated and secure solution for residential and commercial properties with double swing gates, offering convenience and control over access.
Add to wishlist
Read more
Quick view
Compare

Underground Exit Wand Vehicle Detector

$187.30
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS MP110
Compare

Dual swing gate opener -VDS MP110

,
$1,230.35

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener -VDS MP110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view