Dual Swing Gate Operators
Dual swing gate opener – VDS EGO24
Dual swing gate opener -VDS RG24
Ship or pick up from our office.
Product Sheet PDFA double swing underground gate opener is a type of automated gate system designed for double swing gates, where the gate is split into two separate panels that meet in the middle.
The opener mechanism is installed underground, making it virtually invisible and aesthetically pleasing. This dual swing gate opener -VDS RG24 setup allows for a shorter swing radius for each gate leaf compared to a single-panel swing gate.
Here's a more detailed explanation:
-
Double Swing Gates:These gates consist of two gate panels that swing open independently, usually meeting in the middle of the opening. This design is often used for wider driveways or when a single, large gate would be impractical or aesthetically undesirable.
-
Underground Installation:The gate opener mechanism (including the motor and related components) is placed in a foundation box installed below ground level, typically at the hinge point of the gate.
-
Aesthetics and Space:This type of opener offers a cleaner, more discreet look, as the mechanics are hidden from view. It also allows for a shorter swing radius for each gate leaf, which is beneficial in spaces with limited clearance.
-
Operation:The opener receives a signal, usually from a remote control or other access control system, which activates the motor. The motor then rotates a lever or arm connected to the gate, causing it to swing open or closed.
-
Dual Gate Compatibility:Double swing gate openers typically require two gate motors, one for each gate leaf.
-
Safety Features:Many underground gate openers include safety features like limit switches to control the start/stop speed and travel of the gate, as well as manual release mechanisms for emergency situations.
Underground Dual Swing Gate Opener -VDS RG110
Ship or pick up from our office.
Product Sheet PDFUnderground Dual Swing Gate Opener -VDS RG110
The Swing gate opener -VDS Underground RG110 is one of the best underground swing gate operators that can be installed for the swing driveway gates.The Swing gate opener -VDS Underground RG110 is Italian-made and can be installed for heavy swing gates.
*Electromechanical Motor *Maximum gate weight: 500 Kg *120 V More information about the swing gate openers: WHAT ARE THE DIFFERENT TYPES OF SWING GATE MOTORS? 1- Articulated Arm for Swing Gate Operators How do automatic gates work with articulated swing gate motors? An articulated arm electric gate opener uses a two-part arm with an ‘elbow’ joint to connect the motor to the gate. This arm protrudes from the gate motor body, so there has to be room for the arm to move as the driveway gate opens and closes. This type of electric gate opener is easier to install than other types, thanks to the geometry of the arm system. They can be slightly more expensive than other gate motors, but they open and close automated gates quickly. Many homeowners like discrete gate automation systems, and articulated arm motors can be more obvious when installed. However, many have the control system built into one of the motors. These motors for automatic gates are mounted on the inside of gates so they’re not seen from the outside of closed gates. In the event of power failure or mechanical breakdown, articulated arm motors can normally be released manually from outside the gate with an optional cable release system. All articulated arm gate operators are electric gate motors that can be either 120VAC or 24VDC. All 24V and some 120V versions have obstacle detection. This means that the gates stop moving and some even reverse when they come into contact with an object during operation. Articulated arm gate automation systems can be the best choice where each electric gate opener is mounted on a large gate pier or pillar. 2- Ram And Linear Screw Automatic Swing Gate Openers Ram gate automation motors push and pull a piston mounted on the gate. Linear screw electric motors for gates use an electric motor to rotate the gate mounting along a threaded shaft. Both types of electric gate motors are slim and don’t need a lot of space to operate. However, this advantage does mean that they require careful alignment during installation. Manual release systems are only available from inside the driveway gate. A ram or linear screw type of motor for automatic gate control is attached to the gate at one end and the gate pillar or post at the other end. Ram motors can be hydraulic or driven by electric motors, but all require a separate control box. As with articulated arm motors, 120Vac, and 24Vdc, you can buy versions with obstacle detection for safer operation. Additionally, heavy-duty versions of each type of electric gate opener are available that will operate larger gates with leaves up to 7m long. These electric gate openers can be the best gate automation solution when price is important. Their simpler design and operation can make them a cost-effective solution compared to other types of electric gate motors. 3- Underground Swing Gate Operators Many Canadian homeowners choose underground gate automation motors because they are very discreet. This is because each underground gate opener is hidden under the hinge end of each swing gate. But how do automatic gates work when they’re opened and closed by hidden underground motors? During installation, a carefully positioned hole must be dug to house a foundation box for each underground gate opener. The housing for each underground electric gate motor needs sufficient drainage to prevent the motors from sitting in water, or they will fail. Underground electric gate motors don’t need a lot of space to operate and can be installed on the inside or back of gate pillars. They are usually only installed behind gate pillars when the gates must open more than 90 degrees, so that the post or pillar does not obstruct the gates. With the addition of a 180-degree gate opener, your gates can open much wider than 90 degrees. This is an optional chain drive system for driveways that bend around behind the gate pillars. If the gate only opened to 90 degrees, it could block part of the driveway. But a 180-degree gate opener system means that it can keep going past 90 degrees, so it doesn’t block the driveway. Normally, underground automation of gates is the most expensive solution, but they are almost invisible. It is possible for the most powerful underground gate opener to open and close a swing gate up to 5m long. Underground motors for automatic gates can be manually released from outside the gate. These types of gate motors can be either hydraulic or electromechanical. A separate control box is required, and 120VAC and 24VDC versions with obstacle detection are available. Underground gate opener installation is not simple, and it should always be installed by professional electric gate engineers. Underground gate automation could be the best style for you if you want a discreet, almost invisible electric gate motor installation and you have the budget for this more expensive option.
Dual Swing Gate Opener –Key Automation STAR3024
Ship or pick up from our office.
Product Sheet PDFDual Swing Gate Opener –Key Automation STAR3024
More information about the swing gate openers: WHAT ARE THE DIFFERENT TYPES OF SWING GATE MOTORS? 1- Articulated Arm for Swing Gate Operators How do automatic gates work with articulated swing gate motors? An articulated arm electric gate opener uses a two-part arm with an ‘elbow’ joint to connect the motor to the gate. This arm protrudes from the gate motor body, so there has to be room for the arm to move as the driveway gate opens and closes. This type of electric gate opener is easier to install than other types, thanks to the geometry of the arm system. They can be slightly more expensive than other gate motors, but they open and close automated gates quickly. Many homeowners like discrete gate automation systems, and articulated arm motors can be more obvious when installed. However, many have the control system built into one of the motors. These motors for automatic gates are mounted on the inside of gates so they’re not seen from the outside of closed gates. In the event of power failure or mechanical breakdown, articulated arm motors can normally be released manually from outside the gate with an optional cable release system. All articulated arm gate operators are electric gate motors that can be either 120VAC or 24VDC. All 24V and some 120V versions have obstacle detection. This means that the gates stop moving and some even reverse when they come into contact with an object during operation. Articulated arm gate automation systems can be the best choice where each electric gate opener is mounted on a large gate pier or pillar. 2- Ram And Linear Screw Automatic Swing Gate Openers Ram gate automation motors push and pull a piston mounted on the gate. Linear screw electric motors for gates use an electric motor to rotate the gate mounting along a threaded shaft. Both types of electric gate motors are slim and don’t need a lot of space to operate. However, this advantage does mean that they require careful alignment during installation. Manual release systems are only available from inside the driveway gate. A ram or linear screw type of motor for automatic gate control is attached to the gate at one end and the gate pillar or post at the other end. Ram motors can be hydraulic or driven by electric motors, but all require a separate control box. As with articulated arm motors, 120Vac, and 24Vdc, you can buy versions with obstacle detection for safer operation. Additionally, heavy-duty versions of each type of electric gate opener are available that will operate larger gates with leaves up to 7m long. These electric gate openers can be the best gate automation solution when price is important. Their simpler design and operation can make them a cost-effective solution compared to other types of electric gate motors. 3- Underground Swing Gate Operators Many Canadian homeowners choose underground gate automation motors because they are very discreet. This is because each underground gate opener is hidden under the hinge end of each swing gate. But how do automatic gates work when they’re opened and closed by hidden underground motors? During installation, a carefully positioned hole must be dug to house a foundation box for each underground gate opener. The housing for each underground electric gate motor needs sufficient drainage to prevent the motors from sitting in water, or they will fail. Underground electric gate motors don’t need a lot of space to operate and can be installed on the inside or back of gate pillars. They are usually only installed behind gate pillars when the gates must open more than 90 degrees, so that the post or pillar does not obstruct the gates. With the addition of a 180-degree gate opener, your gates can open much wider than 90 degrees. This is an optional chain drive system for driveways that bend around behind the gate pillars. If the gate only opened to 90 degrees, it could block part of the driveway. But a 180-degree gate opener system means that it can keep going past 90 degrees, so it doesn’t block the driveway. Normally, underground automation of gates is the most expensive solution, but they are almost invisible. It is possible for the most powerful underground gate opener to open and close a swing gate up to 5m long. Underground motors for automatic gates can be manually released from outside the gate. These types of gate motors can be either hydraulic or electromechanical. A separate control box is required, and 120VAC and 24VDC versions with obstacle detection are available. Underground gate opener installation is not simple, and it should always be installed by professional electric gate engineers. Underground gate automation could be the best style for you if you want a discreet, almost invisible electric gate motor installation and you have the budget for this more expensive option.
Dual swing gate opener – Key Automation RAY2224
Ship or pick up from our office.
Product Sheet PDFDual swing gate opener – Key Automation RAY2224
A swing gate opener is a device that automates the opening and closing of a swing gate, typically using a motor and a control system.
It provides a convenient and secure way to control access to a property, whether residential, commercial, or industrial. These openers can be used with various gate types, including those that swing inward or outward.
How it works:
-
Motor:A motor, powered by electricity (AC or DC), provides the force to move the gate.
-
Control System:A control board receives signals from a remote control, keypad, or other access control system and activates the motor accordingly.
-
Opening Mechanism:Depending on the type of swing gate opener, the mechanism can be a linear arm, an articulated arm, or an underground system.
-
Safety Features:Many swing gate openers include safety features like obstruction detection, which stops the gate if it encounters an obstacle during opening or closing.
-
Emergency Release:An emergency release mechanism allows manual operation of the gate in case of power failure.
Types of Swing Gate Openers:
- Linear Arm: These are the most common type, using a linear actuator to push or pull the gate.
- Articulated Arm: These use a hinged arm to move the gate, reducing strain on the hinges.
- Underground: The motor and mechanism are installed underground, providing a more discreet appearance.
- Dual Swing: These openers are designed for gates that swing open from the center.
Benefits of using a swing gate opener:
- Convenience: Automatic opening and closing of the gate with the press of a button or remote control.
- Security: Prevents unauthorized access to the property.
- Enhanced Property Value: Adds a layer of sophistication and security to the property.
- Accessibility: Can be particularly useful for people with mobility issues.
Dual Swing Gate Opener -VDS Articulated
Ship or pick up from our office.
Product Sheet PDF More information about the swing gate openers: WHAT ARE THE DIFFERENT TYPES OF SWING GATE MOTORS? 1- Articulated Arm for Swing Gate Operators How do automatic gates work with articulated swing gate motors? An articulated arm electric gate opener uses a two-part arm with an ‘elbow’ joint to connect the motor to the gate. This arm protrudes from the gate motor body, so there has to be room for the arm to move as the driveway gate opens and closes. This type of electric gate opener is easier to install than other types, thanks to the geometry of the arm system. They can be slightly more expensive than other gate motors, but they open and close automated gates quickly. Many homeowners like discrete gate automation systems, and articulated arm motors can be more obvious when installed. However, many have the control system built into one of the motors. These motors for automatic gates are mounted on the inside of gates so they’re not seen from the outside of closed gates. In the event of power failure or mechanical breakdown, articulated arm motors can normally be released manually from outside the gate with an optional cable release system. All articulated arm gate operators are electric gate motors that can be either 120VAC or 24VDC. All 24V and some 120V versions have obstacle detection. This means that the gates stop moving and some even reverse when they come into contact with an object during operation. Articulated arm gate automation systems can be the best choice where each electric gate opener is mounted on a large gate pier or pillar. 2- Ram And Linear Screw Automatic Swing Gate Openers Ram gate automation motors push and pull a piston mounted on the gate. Linear screw electric motors for gates use an electric motor to rotate the gate mounting along a threaded shaft. Both types of electric gate motors are slim and don’t need a lot of space to operate. However, this advantage does mean that they require careful alignment during installation. Manual release systems are only available from inside the driveway gate. A ram or linear screw type of motor for automatic gate control is attached to the gate at one end and the gate pillar or post at the other end. Ram motors can be hydraulic or driven by electric motors, but all require a separate control box. As with articulated arm motors, 120Vac, and 24Vdc, you can buy versions with obstacle detection for safer operation. Additionally, heavy-duty versions of each type of electric gate opener are available that will operate larger gates with leaves up to 7m long. These electric gate openers can be the best gate automation solution when price is important. Their simpler design and operation can make them a cost-effective solution compared to other types of electric gate motors. 3- Underground Swing Gate Operators Many Canadian homeowners choose underground gate automation motors because they are very discreet. This is because each underground gate opener is hidden under the hinge end of each swing gate. But how do automatic gates work when they’re opened and closed by hidden underground motors? During installation, a carefully positioned hole must be dug to house a foundation box for each underground gate opener. The housing for each underground electric gate motor needs sufficient drainage to prevent the motors from sitting in water, or they will fail. Underground electric gate motors don’t need a lot of space to operate and can be installed on the inside or back of gate pillars. They are usually only installed behind gate pillars when the gates must open more than 90 degrees, so that the post or pillar does not obstruct the gates. With the addition of a 180-degree gate opener, your gates can open much wider than 90 degrees. This is an optional chain drive system for driveways that bend around behind the gate pillars. If the gate only opened to 90 degrees, it could block part of the driveway. But a 180-degree gate opener system means that it can keep going past 90 degrees, so it doesn’t block the driveway. Normally, underground automation of gates is the most expensive solution, but they are almost invisible. It is possible for the most powerful underground gate opener to open and close a swing gate up to 5m long. Underground motors for automatic gates can be manually released from outside the gate. These types of gate motors can be either hydraulic or electromechanical. A separate control box is required, and 120VAC and 24VDC versions with obstacle detection are available. Underground gate opener installation is not simple, and it should always be installed by professional electric gate engineers. Underground gate automation could be the best style for you if you want a discreet, almost invisible electric gate motor installation and you have the budget for this more expensive option.A swing gate opener is a device that automates the opening and closing of a swing gate, typically using a motor and a control system.
It provides a convenient and secure way to control access to a property, whether residential, commercial, or industrial. These openers can be used with various gate types, including those that swing inward or outward.
How it works:
-
Motor:A motor, powered by electricity (AC or DC), provides the force to move the gate.
-
Control System:A control board receives signals from a remote control, keypad, or other access control system and activates the motor accordingly.
-
Opening Mechanism:Depending on the type of swing gate opener, the mechanism can be a linear arm, an articulated arm, or an underground system.
-
Safety Features:Many swing gate openers include safety features like obstruction detection, which stops the gate if it encounters an obstacle during opening or closing.
-
Emergency Release:An emergency release mechanism allows manual operation of the gate in case of power failure.
Types of Swing Gate Openers:
- Linear Arm: These are the most common type, using a linear actuator to push or pull the gate.
- Articulated Arm: These use a hinged arm to move the gate, reducing strain on the hinges.
- Underground: The motor and mechanism are installed underground, providing a more discreet appearance.
- Dual Swing: These openers are designed for gates that swing open from the center.
Benefits of using a swing gate opener:
- Convenience: Automatic opening and closing of the gate with the press of a button or remote control.
- Security: Prevents unauthorized access to the property.
- Enhanced Property Value: Adds a layer of sophistication and security to the property.
- Accessibility: Can be particularly useful for people with mobility issues.
