Shop
Single swing gate opener – NICE Wingo 4024
Ship or pick up from our office.
Product Sheet PDFSingle swing gate opener – NICE Wingo 4024
*Suitable gate weight: Maximum 400 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Openers are designed to fit a wide range of settings and applications. The NICE Wingo 4024 is a popular electromechanical swing gate opener designed for automating residential and light industrial swing gates. It's known for its reliability, quiet operation, and ease of installation. Here's a breakdown of its key features and specifications: Key Features:- Suitable for a range of gates: It's typically designed for swing gates with leaves up to 2 meters (approximately 6.5 feet) in length and weighing up to 400 kg (approximately 880 lbs). Some sources also mention it being suitable for gates up to 3m, but 2m is more commonly cited.
- 24 Vdc electromechanical gear motor: This provides efficient and relatively quiet operation.
- Reliable and Silent: Thanks to a patented layout of its internal components, it has fewer moving parts, contributing to its durability and quiet performance.
- Easy Installation: Electrical connections are made from above after the gear motor is assembled, simplifying the installation process. It also comes with pre-assembled travel stops for opening.
- User-friendly release: In case of power failure, it features a convenient manual release mechanism, often with a personalized Nice key or a standard lock (optional).
- Moonclever control unit (MC424/MC424L): This advanced control unit offers:
- Simple programming via a single key.
- Automatic memorization of limit switches for opening and closing with a self-learning function.
- Anti-crush safety feature (clutch).
- Automatic fault diagnostics.
- Adjustable pause time.
- Pedestrian pass-door function (partial opening).
- Soft stop/start (deceleration) for smooth operation.
- Obstacle detection with dual technology.
- Compatibility with 8.2 KOhm resistive sensitive edges for enhanced safety.
- Option for uninterrupted operation with rechargeable batteries (PS124/PS324) in case of power failure.
- Compatibility with the Solemyo solar power system for off-grid installations.
- Surface-mounted: It's designed to be mounted on the surface of the gate post.
- Durable construction: Features tough aluminum shells with a polyester paint finish to resist atmospheric agents.
- Power Supply: 24 Vdc
- Absorption: 3.5 A
- Power: 85 W
- Speed: 0.018 m/s
- Force: 1500 N
- Work Cycle: 30 cycles/hour
- Protection Level (IP): 44 (protected against solid objects larger than 1mm and splashing water from any direction)
- Working Temperature: -20°C to +50°C
- Dimensions (mm): 770x98x95 (h)
- Weight (kg): Approximately 6 kg per motor (a kit with two motors would be around 17 kg total)
Single swing gate opener -Zero ZSW600
Ship or pick up from our office.
Single swing gate opener -Zero ZSW600
*Suitable gate weight: Maximum 300 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
Keypad KO05SC107
Ship or pick up from our office.
Keypad KO05SC107
*Waterproof Keypad Version *EM/ID card/tag reader *Backlight Keypad *1000 Users *DC 12 V *Rain Shield Cover included in the keypad package The Keypad KO05SC107 is a standalone RFID access control keypad that is used to restrict entry to authorized individuals by requiring them to enter a specific code or PIN, or use an RFID card. 🔑 It's manufactured by Royal Electronics Technology Center Co. and is suitable for indoor use, although a rain shield cover is often included. Key Features & Specifications The KO05SC107 offers a range of features designed for security and convenience:- Access Methods: Users can gain entry by entering a PIN, using an RFID card, or a combination of both (card + PIN).
- User Capacity: It can store up to 1000 users, making it suitable for various settings like residential buildings, commercial properties, and industrial facilities.
- Card Reader Mode: It functions as an RFID card reader, and the transmission format can be adjusted by the user.
- Customization: Access can be customized for specific times or individuals, providing enhanced control.
- Integration: It can be integrated with other security systems such as intercoms, video surveillance, and alarm systems.
- Dimensions: The keypad has dimensions of 16 × 11 × 11 cm and weighs 0.4 kg.
- Durability: Some versions are waterproof.
- Residential homes
- Commercial offices
- Industrial facilities
- Any entry point where controlled access is needed, such as gates or doors.
Single swing gate opener -Zero ZSW400
Ship or pick up from our office.
Single swing gate opener -Zero ZSW400
*Suitable gate weight: Maximum 200 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
Single swing gate opener –Difermatic BHE110
Ship or pick up from our office.
Single swing gate opener –Difermatic BHE110
*Suitable gate weight: Maximum 200 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
Exit Button RCTPB801
Ship or pick up from our office.
Exit Button RCTPB801
*Touch *Backlight *DC 12V *COM-NC-NOAn Exit push button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms.
Here's a more detailed explanation:
-
Function:An exit push button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit.
-
Purpose:They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available.
-
Types:Exit push buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them.
-
Importance:These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals.
-
Applications:Exit push buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities.
Safety sensor P51022H
Ship or pick up from our office.
Safety sensor P51022H
*NO/NC *AC/DC 12-24 V *Receiving Range: 12 Meters *IP 54 *External LED flash lamp signal (AC/DC 12V-24 V) *Internal Rotation system: 0~180 The P51022H is a safety sensor, specifically a photoelectric sensor, commonly used in automated gate and garage door opener systems. Functionality Like most photoelectric safety sensors, the P51022H works by:- Transmitting an infrared light beam: One part of the sensor (the emitter) sends out an invisible light beam.
- Receiving the beam: The other part of the sensor (the receiver) is designed to detect this beam.
- Obstruction detection: If something breaks the infrared beam while the gate or door is closing, the receiver instantly signals the opener to stop or reverse its movement. This prevents the door or gate from closing on people, pets, or objects, thus enhancing safety and preventing damage.
- Automated gate openers: For both single swing and sliding gates, ensuring they don't close on anything in their path.
- Garage door openers: A mandatory safety feature in most modern residential garage doors, preventing accidents.
- Type: Photoelectric sensor (often referred to as "photo eyes" or "safety beams").
- Components: Typically comes as a kit including a sending sensor (emitter) and a receiving sensor.
- Installation Height: These sensors are usually installed a few inches (e.g., 6 inches) above the ground to effectively detect obstacles, including small children or pets.
- Voltage: Similar sensors often operate on 12-24V AC/DC.
Single swing gate opener –VDS MP110
Ship or pick up from our office.
Product Sheet PDFSingle swing gate opener –VDS MP110
*Suitable gate weight: Maximum 200 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote controls *1 x Manual release key *1 x Safety Sensor
Key selector
Ship or pick up from our office.
Key selector
A gate opener key selector is a device that allows you to manually open and close an automatic gate using a physical key, providing an alternative access method in case of power outages or remote control malfunctions. It essentially disengages the automated system, allowing for manual operation of the gate. A gate opener key selector is a device used to control the operation of an automated gate (or door, garage door, barrier, etc.) using a physical key. It's essentially a key-operated switch that allows authorized users to open, close, or set the operating mode of the gate. Here's a breakdown of its function and characteristics:- Purpose: The primary purpose of a key selector is to provide a secure and convenient way to operate an automatic gate, especially in situations where remote controls, keypads, or other access methods might not be practical or desired (e.g., for maintenance personnel, or as a backup).
- Mechanism: It typically consists of a sturdy, often metal, housing that is mounted on a wall, column, or recessed into a wall. Inside, there's a key cylinder that, when turned, activates a microswitch or set of contacts. These contacts then send a signal to the gate opener's control unit, telling it to perform a specific action (open, close, or a specific operating mode).
- Security: Key selectors are designed to be robust and weather-resistant, often with vandal-proof features. The use of a physical key adds a layer of security, as only individuals with the correct key can operate the gate.
- Types and Features:
- Key-operated switches: The most common type, where inserting and turning a key triggers the gate's action.
- Universal or European cylinder locks: Different types of key cylinders can be used for varying levels of security and compatibility.
- Single or multiple microswitches: Some selectors have one switch for a simple open/close function, while others have multiple switches to allow for more complex operations (e.g., partial opening, full opening, lock, exit only, automatic mode).
- Wall-mounted or flush-mounted: They can be installed on the surface of a wall or column, or recessed for a more discreet look.
- Material: Often made from durable materials like aluminum or die-cast metal to withstand outdoor conditions and potential impact.
- Integration: Key selectors are accessories that integrate with the overall automated gate system, complementing other access control methods like remote controls, keypads, transponder readers, or even smartphone apps.
Single swing gate opener –VDS EGO110
Ship or pick up from our office.
Product Sheet PDFSingle swing gate opener –VDS EGO110
*Suitable gate weight: Maximum 200 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key The VDS EGO110 is a model of single swing gate opener manufactured by VDS Automation. It is an electromechanical operator designed to automate swing gates. Here's a breakdown of its key characteristics and features:- Type: Linear screw electromechanical operator. This means it uses an electric motor to rotate a threaded shaft, which in turn pushes or pulls the gate.
- Gate Compatibility:
- Suitable for single swing gates.
- Maximum gate leaf length: Up to 3 meters (some variations might support up to 2.5 meters).
- Maximum gate weight: Up to 200 kg per leaf.
- Construction:
- Sturdy aluminum structure.
- Stainless steel rod (with a typical stroke of 400mm).
- Parts lubricated with lithium grease for protection against corrosion, oxidation, and rust.
- Performance:
- Quiet operation (typically < 30 dBA noise level).
- High-performance electric motor.
- Opening angle: Up to 120°.
- Opening time: Around 20-25 seconds.
- Thrust: 2000N.
- Available in 120VAC and 24VDC versions. The 24VDC versions are often described as "intensive use" with higher frequency of use (90%) compared to 230VAC (50%).
- Safety Features:
- Anti-squashing system (compliant with EN 12453 standards).
- Slowing down function.
- Thermal cutout at 140° (for motor protection).
- Obstacle detection (especially in 24V and some 120V versions).
- Installation & Convenience:
- Quick installation with multi-position brackets and a cover for brackets in technopolymer.
- Manual release with a key for operation during power outages.
- Optional limit switches.
- Optional battery backup kit (for 24V models).
- Often comes with a control unit (sometimes with a built-in receiver).
Single swing gate opener –HiGate HGSW950
Ship or pick up from our office.
Single swing gate opener –HiGate HGSW950
*Suitable gate weight: Maximum 200 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
Safety sensor FT2008
Ship or pick up from our office.
Safety sensor FT2008
*NO/NC *AC/DC 12-24 V *Receiving Range: 15 Meters *IP 44A gate opener safety sensor is a device designed to detect objects or people in the path of an automatic gate and prevent it from closing or hitting them, ensuring safety and preventing damage or injury.
These sensors can be photoelectric, pressure sensors, magnetic sensors, or loop detectors and are crucial for preventing accidents and ensuring smooth gate operation.
Types of Gate Opener Safety Sensors:
-
Photoelectric Sensors:These sensors use an infrared beam to detect objects. When the beam is broken by an object, the gate opener is signaled to stop or reverse.
-
Pressure Sensors:These sensors are typically located along the edge of the gate and detect pressure when the gate comes into contact with an object.
-
Magnetic Sensors:These sensors use a magnetic field to detect the presence of vehicles or objects near the gate.
-
Loop Detectors:These sensors use a wire loop buried in the ground near the gate. When a vehicle or object passes over the loop, it triggers the gate to stop or reverse.
How They Work:
- Detection: The sensor detects the presence of an object or person in the gate's path.
- Signal: The sensor sends a signal to the gate operator.
- Action: The gate operator responds by stopping, reversing, or remaining open, depending on the sensor type and programmed settings.
Importance of Safety Sensors:
- Prevent Accidents: They protect people and vehicles from being hit by the gate.
- Prevent Damage: They help avoid damage to the gate, vehicles, or property.
- Ensure Reliable Operation: They contribute to the smooth and safe operation of the gate.
