Shop
Wireless Keypad Access Control KW402
Ship or pick up from our office.
Wireless Keypad Access Control KW402
*Wireless *Rain Shield Cover included *2 Channels *LED Back Light *433 MHz
The Wireless Keypad Access Control KW402 is the preferred secure activation device for the Autoslide Automatic Door System. This security keypad will allow you to enter your home from the outside using a unique programmed code. Combined with the VDS and ZERO gate motor, you can have a secure and automated entryway into and out of your home or workplace.
The Wireless Keypad Access Control KW402 is wireless and provides the benefit of not having to run cables through your exterior walls. It has two channels that will allow you to not only have a regular access code but also one you can change for guests to access your home.
The Wireless Keypad Access Control KW402 is programmable for two separate codes up to eight digits long each. Audible beeps will alert you to an accepted code as well as an invalid code.
Specifications:
Duplicate Your Existing Remote Controllers so you always have a backup:
1.Vehicle central locking systems
2. Garage doors
3. Electronic gates
4. Electrical appliances/Home automation i.e. lights
5. Car sunroofs
6. Car/Motorbike alarms Easy to use, the 4 channel remote control system lets you take control of your gets, car, home and garage
Wireless Keypad Access Control KW402:
1,This is a dual channel transmitters that are activated only after having entered a Suitable combination.
2, The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.
3,The estimated transmission range is 200 m in open space and 35m indoors .
4, The units are designed to ensure battery life equivalent to an estimated 2 years of oper-ation considering 10 transmissions/day.
Specification Wireless Keypad Access Control KW402:
Power:6Volt DC 2PCS CR2032 Li battery Battery life:2 years (4 times operation every day)
Frequency:433.92MHz+/-75KHz
Transmitter power:1Mw
Data format:standard
Work temp:-20~+55 centidegree
Password number:0-8
Water proof level:1p54
Dimension:85*75*35mm
Weight:150g
Radio receiver – LiftMaster 412HM
Ship or pick up from our office.
Radio receiver – LiftMaster 412HM
How it Works:
- The receiver is installed on the gate or garage door opener's control board.
- It receives signals from the remote control.
- The receiver then transmits the signal to the opener's control board.
- The control board verifies the signal and activates the door or gate.
In essence, the 412HM allows you to control your gate or garage door with a LiftMaster remote, offering a secure and convenient access solution.
Safety sensor FO-MATIC
Ship or pick up from our office.
Safety sensor FO-MATIC
*NO/NC *AC/DC 12-24 V *Receiving Range: 15 Meters *IP 44
Keypad access control K100SC104
Exit Loop Car Detector
Ship or pick up from our office.
Exit Loop Car Detector
Safety sensor FT2008
Ship or pick up from our office.
Safety sensor FT2008
*NO/NC *AC/DC 12-24 V *Receiving Range: 15 Meters *IP 44A gate opener safety sensor is a device designed to detect objects or people in the path of an automatic gate and prevent it from closing or hitting them, ensuring safety and preventing damage or injury.
These sensors can be photoelectric, pressure sensors, magnetic sensors, or loop detectors and are crucial for preventing accidents and ensuring smooth gate operation.
Types of Gate Opener Safety Sensors:
-
Photoelectric Sensors:These sensors use an infrared beam to detect objects. When the beam is broken by an object, the gate opener is signaled to stop or reverse.
-
Pressure Sensors:These sensors are typically located along the edge of the gate and detect pressure when the gate comes into contact with an object.
-
Magnetic Sensors:These sensors use a magnetic field to detect the presence of vehicles or objects near the gate.
-
Loop Detectors:These sensors use a wire loop buried in the ground near the gate. When a vehicle or object passes over the loop, it triggers the gate to stop or reverse.
How They Work:
- Detection: The sensor detects the presence of an object or person in the gate's path.
- Signal: The sensor sends a signal to the gate operator.
- Action: The gate operator responds by stopping, reversing, or remaining open, depending on the sensor type and programmed settings.
Importance of Safety Sensors:
- Prevent Accidents: They protect people and vehicles from being hit by the gate.
- Prevent Damage: They help avoid damage to the gate, vehicles, or property.
- Ensure Reliable Operation: They contribute to the smooth and safe operation of the gate.
Sliding gate operator chain
Ship or pick up from our office.
Sliding gate operator chain
Keypad Access Control K110V2000
Keypad Access Control K110V2000
The Keypad Access Control K110V2000 is a standalone access control system designed for single-door access, typically used for residential or small-to-medium commercial buildings.
It allows users to unlock the door using either a proximity card, a PIN code, or a combination of both.
Here's a more detailed breakdown:
Key Features:
- Multiple User Capacity: It can support up to 1000 users.
- Multiple Access Methods: Users can unlock the door using RFID cards, PIN codes, or both.
- Standalone Operation: It functions independently, without needing to be connected to a central computer.
- Wiegand Input/Output: It can connect to an external card reader (Wiegand 26 input) and a controller (Wiegand 26 output).
- Tamper Alarm: Includes a tamper alarm for added security.
- Backlit Keypad: The keypad is backlit, making it easier to use in low-light conditions.
- Short Circuit Protection: The output is automatically turned off if there's a short circuit in the electric lock or alarm output.
- Waterproof: Some models, like the V2000-C, are waterproof, making them suitable for outdoor use.
- Easy Installation and Programming: The system is designed for straightforward installation and programming.
- Doorbell Input: Some models include a doorbell input.
- Adjustable Settings: Features like door output time, alarm time, and door open time can be adjusted.
Applications:
- Residential Buildings: Ideal for controlling access to apartments or individual homes.
- Small to Medium Businesses: Suitable for offices, shops, and other commercial spaces.
- Warehouses and Factories: Can be used to manage access to secure areas.
- Other Applications: Laboratories, banks, and even prisons.
Car back-up camera
Ship or pick up from our office.
Car back-up camera
A car back-up camera, also widely known as a rearview camera or reversing camera, is a specialized video camera mounted on the rear of a vehicle. Its primary function is to provide the driver with a visual feed of the area directly behind the car when the vehicle is in reverse. This significantly enhances safety and convenience, especially when parking or maneuvering in tight spaces. How it Works:- Camera Placement: The camera is typically small and discreetly mounted on the rear of the vehicle. Common locations include near the license plate, integrated into the trunk handle, or within the rear bumper.
- Activation: When the driver shifts the vehicle into REVERSE gear, the back-up camera automatically activates.
- Video Feed: The camera captures a wide-angle video image of the area behind the car.
- Display: This live video feed is then displayed on a screen inside the vehicle. This screen can be:
- An integrated display in the dashboard (common in newer vehicles).
- A dedicated monitor that mounts on the dashboard.
- A replacement rearview mirror with an integrated screen.
- An aftermarket car stereo head unit with a video input.
- Deactivation: When the driver shifts out of reverse, the camera typically turns off.
- Enhanced Safety: This is the most crucial benefit. Back-up cameras dramatically reduce blind spots behind the vehicle, helping drivers avoid collisions with:
- Pedestrians: Especially children and pets who may not be visible in rearview mirrors.
- Obstacles: Such as bollards, low walls, fire hydrants, or other vehicles.
- Improved Parking: Makes parallel parking and backing into parking spots much easier and more precise.
- Parking Guidelines: Many systems overlay dynamic (move with steering wheel input) or static lines on the screen to help the driver estimate distance and trajectory.
- Night Vision/Low-Light Capability: Many cameras are equipped with enhanced low-light sensors or infrared (IR) LEDs to provide a clear image even in dark conditions.
- Wide Viewing Angle: Essential for comprehensive coverage, typically offering 120 to 170 degrees of view to minimize blind spots.
- Weather Resistance: Since they are mounted externally, backup cameras are designed to be waterproof and dustproof (often with an IP67 rating or higher).
- Integration with Other Systems: Some advanced systems integrate with parking sensors (audible warnings) and Rear Cross-Traffic Alert (warns of approaching vehicles from the sides when backing out of a spot).
- Wired vs. Wireless:
- Wired cameras: Offer a more reliable connection and typically higher video quality, but require running cables through the vehicle.
- Wireless cameras: Easier to install as they transmit the video feed wirelessly, but can sometimes be susceptible to interference or have lower resolution.
Radio receiver – LiftMaster 312HM
Ship or pick up from our office.
Radio receiver – LiftMaster 312HM
A LiftMaster radio receiver is a device that allows LiftMaster garage door openers, gate operators, and other access control systems to communicate wirelessly with remote controls or keypads. These receivers are crucial for enabling remote operation of devices and are often used in both residential and commercial settings.
Here's a more detailed explanation:
-
Functionality:LiftMaster radio receivers act as a bridge, translating the signals from a remote control or keypad into commands that the opener or operator can understand and execute.
-
Types:There are various types of LiftMaster receivers, including those designed for garage door openers, gate operators, and commercial door operators.
-
Security:Many LiftMaster receivers, especially those with Security+ 2.0 technology, use rolling code encryption to enhance security and prevent unauthorized access.
-
Compatibility:LiftMaster receivers are designed to be compatible with a range of LiftMaster remote controls and keypads.
-
Installation:Receivers can be internal (built into the opener or operator) or external (connected via wiring to the opener or operator).
-
Features:Some receivers offer features like multi-channel support (allowing control of multiple devices), narrow-band technology (to minimize interference), and the ability to temporarily disable remotes.
-
Examples:
- 850LM: A universal receiver compatible with Security+ 2.0 remotes, often used in gated communities and for controlling multiple access points.
- 412HM: A 390MHz Liftmaster radio receiver commonly used with gate operators and commercial doors.
- STAR1000: A commercial receiver with advanced features like user management and copying remote settings.
- 850LM: A universal receiver compatible with Security+ 2.0 remotes, often used in gated communities and for controlling multiple access points.
Wireless Keypad Access Control – ALEKO LM172
Ship or pick up from our office.
Wireless Keypad Access Control – ALEKO LM172
-Rain Shield Cover included *Backlight *433 MHz The ALEKO LM172 is a wireless keypad access control system primarily designed for use with ALEKO brand swing and sliding gate openers. It provides a secure and convenient way to control access to a property by requiring users to enter a programmable 6-digit code. Key Features & Specifications- Wireless Operation: It's completely wireless, eliminating the need for electrical connections to the gate opener. It operates on 3 AAA batteries.
- Frequency: It uses a 433.92 MHz frequency for communication with compatible gate openers.
- Security: Enhances security by restricting access to authorized individuals who know the programmable 6-digit code, reducing reliance on traditional remote controls.
- Durability: Features a rugged metal construction designed to withstand various weather conditions. Some listings mention heavy-duty iron construction.
- Visibility: Equipped with backlit keys for easy use in low-light conditions.
- Compact Design: Has a relatively compact profile (approx. 3.5"L x 3.25"W x 1"D or 4" x 3" x 3").
- Range: Offers a typical operating range of up to 32 feet (10 meters) from the gate opener's receiver. It's recommended to install it within 5 meters (16 feet) of the control box on the same side of the driveway to avoid interference.
- Installation: Designed for easy installation, typically mounted with screws. It can be buried in the ground or fixed on the ground with a compatible mounting post.
- ALEKO Swing Gate Openers: AS/GG Series (e.g., AS450, AS600, AS650, AS900, AS1200, AS1300, AS1700 models).
- ALEKO Sliding Gate Openers: AR/AC Series (e.g., AR900, AR1300, AR1800, AR2200, AR2700, AR5700, AC1300, AC1800, AC2200, AC2700, AC5700 models).
- LockMaster Gate Openers: LM901 and LM902 Swing Gate Openers.
- DSC DSR SCG/SFG (H model only) Sliding Gate Openers: Purchased after July 2011.
- Powering on the control board and ensuring it's in standby mode.
- Pressing a "LEARN" button on the control board.
- Pressing the "OK" button on the LM172 keypad to link it with the gate opener.
- Once successfully learned, the control board's LED will indicate confirmation.
