Radio receiver RQ2C433A – IT2

$138.40
Radio receiver RQ2C433A -IT2 (Compatible with the wireless keypad control KW402 & KW125 *SW2) *AC/DC 12-24 V *Made in Italy

Radio receiver RX2CH-Multi Code

$65.85
Radio receiver RX2CH-Multi Code (Compatible with the wireless keypad control KW402 & KW125 *#8) *COMPATIBILITY LIST: NICE, FAAC, Liftmaster, Sommer,

Radio remote control receiver

$61.95

Radio remote control receiver

A radio remote control receiver is an electronic device that receives signals from a remote control and triggers the gate's motor to open or close.
It acts as the "ear" for the gate opener, interpreting the radio signals sent by the remote. These receivers are crucial for the functionality and convenience of automated gate systems. 
Here's a more detailed explanation:
Function: 
  • The receiver is designed to detect the specific radio frequency and code transmitted by the gate remote.
  • Upon receiving the correct signal, it activates the gate's motor, causing the gate to move.

Rectifier Diode 1N5408

$4.45
Rectifier Diode 1N5408 *3 Amp *1000 Volt The 1N5408 is a rectifier diode, a type of semiconductor device that allows current

Rectifier Diodes 1N4007

$1.85
Rectifier Diodes 1N4007 *1 Amp *24 Volt The rectifier diode 1N4007 is a general-purpose rectifier diode widely used in electronic

Reflective safety sensor – OMRON E3JK

$224.85

Ship or pick up from our office.

Reflective safety sensor – OMRON E3JK

*NO/NC *AC/DC 24-240 V *Receiving Range: 40 Meters *IP 64

Relay 5-Pin 40A

$23.85
Relay 5-Pin 40A *DC 12 V *NC/NO A 5-pin 40-amp relay is an electromechanical switch commonly used in automotive and other

Relay Mini PCB 5-Pin 10A

$3.25
Relay Mini PCB 5-Pin 10A *DC 12-24 Volt *NC/NO *10 Amp A mini PCB 5-pin 10A relay is a small, electronic

Relay Mini PCB 8-Pin 1A

$7.65
Relay Mini PCB 8-Pin 1A *DC 12 V *NC/NO A Relay Mini PCB 8-Pin 1A is a miniature, 8-pin, printed circuit

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls.