• +1 (778) 384 2800
  • info@retcc.ca
  • Sample Gate Designs
  • Auxiliary Links
Wishlist
Fast Estimate
Fast Estimate
Royal Gates Royal Gates
  • Home
  • About us
  • Shop
  • Services
    • Driveway Gate
      • Swing Gates
      • Sliding Gate
      • Boom barrier gate
    • Gate Operators
    • Access Control Systems
  • Price
  • Projects
  • Blogs
  • Contact us
Search
0 Compare
0 items $0.00
Menu
Royal Gates
Fast estimate
0 items $0.00
Safety sensor - P51033H
Click to enlarge
Home Accessories Safety sensor – P51033H
swing gate opener NICE Wingo 4024
Single swing gate opener – NICE Wingo 4024 $956.75
Back to products
Sliding gate opener –Royalgate RGSL0.3T
Sliding gate opener –Royalgate RGSL0.3T $404.90

Safety sensor – P51033H

$75.75

Ship or pick up from our office.

Safety sensor – P51033H

*NO/NC

*AC/DC 12-24 V

*Receiving Range: 12 Meters

*IP 54

*External LED flash lamp signal (AC/DC 12V-24 V)

*The P51033H safety sensor included the LED flash light

 

The P51033H is a safety sensor, specifically a photoelectric sensor (also known as a photo eye) commonly used in automatic gate and door systems.

What it Does 🚧

This sensor functions as an obstruction detection device. It consists of two parts: an emitter and a receiver. The emitter sends out an infrared light beam, and the receiver detects it. If an object (like a person, pet, or vehicle) interrupts this beam, the sensor sends a signal to the gate or door’s control board, causing it to stop or reverse its movement, preventing potential injury or damage.

 

Key Specifications ⚙️

Here are some of the technical details for the P51033H:

  • Working Voltage: 12~24VAC/DC
  • Working Current (24VDC):
    • Emitter: ≤15mA
    • Receiver: ≤30mA
  • Photocell Wavelength: 940nm (infrared)
  • Angle of Opposite Emission: ≤±5∘
  • Receiver Range: ≥15m (this range can be reduced by about 30% in adverse weather conditions like fog, rain, or dust)
  • Working Temperature: −20∘C∼+60∘C
  • Relay Contact Loading Capacity: 1A/30VDC
  • Waterproof Grade: IP54
  • Size: 127mm×50mm×35mm
  • Outputs: NO/NC (Normally Open/Normally Closed) contacts

 

Installation Considerations 🛠️

For optimal performance, the P51033H should be installed:

  • Height: More than 20cm above the ground to prevent false reflections.
  • Distance between Emitter and Receiver: More than 0.5 meters to ensure proper operation.
  • Sunlight: The receiver should be installed away from direct sunlight or other strong light sources (±5∘) to maintain stable operation.
  • Multiple Sensors: If multiple photocells are installed on the same line, receivers can be placed at both ends and emitters in the middle, back-to-back, to prevent interference.
  • Firm Installation: Install the photocell firmly to avoid signal bias between the emitter and receiver, which could lead to malfunctions.

 

Safety Importance 🛡️

Safety sensors like the P51033H are crucial for automated systems like gates and doors. They provide a vital layer of protection, ensuring that the system stops or reverses if an obstacle is detected, thereby preventing accidents, injuries, and property damage.

Compare
Add to wishlist
Category: Accessories Tags: gate automation, gate motor, Gate opener, gate operator, P51033H, photoelectric, safety, sensor
Share:
  • Description
  • Additional information
  • Reviews (0)
  • Shipping & Delivery
Description

Safety sensor – P51033H

Electric automatic gate control photocell and flash light integrated safety sensor.

I. Technical Specification of the Safety sensor – P51033H

1. Working voltage: 12~24VAC/DC
2. Working current(24VDC):emitter: ≤15mA    receiver: ≤30mA
3. Photocell wavelength: 940nm
4. Angle of opposite emission: ≤±5°
5. Receiver range: ≥15m
6. Working temperature: -20℃~+60℃
7. Relay contact loading capacity: 1A/30VDC
8. Waterproof grade: IP54
9. Can connect external flash lamp signal (12V-24VAC/DC), LED can flashing.
10. Size: 127*50*35mm

II. Safety Instruction for the Safety sensor – P51033H

1. For security, please read the user manual carefully before initial operation;
2. This photocell is without any fuse, so Please make sure the power is off before installation;
3. Only used this system that do not cause any danger life or property during the running failure or its security risks eliminated;
4. Please guarantee the products used in effective working range.

III. Installation instruction for the Safety sensor – P51033H

1. The product should be installed more than 20cm upper the ground(to avoid reflection), and the distance between emitter and receiver shall be more than 0.5 meters(if not , maybe the photocell will working on or cannot work);
2. the end user  should installed the photocell on the back of the direct sunshine or other strong shining(±5º) to keep the photocell work well steadily
3. Pls try to avoid installing other photocell emitters within effective receive range;
4. If install many photo cells on the same line, can install receivers on two ends and then emitters in the middle back to back which can effectively avoid the  problem as above.
5. in order to avoid signal bias of emitters and receivers which will easily cause mis-operation, pls Installate the photocell firmly
6. Connecting power after checking no error of connecting lines:
6.1 Photocell
After the emitter and receiver module of photocell input 12V-24VAC/DC, emitter LED on,receiver LED on, receiver NO/COM on while NC/COM off;
Making the CAP of emitter and receiver align, receiver LED off, NC/COM on while NO/COM off. If the signal between emitter and receiver is interrupted, receiver LED on, NC/COM off while NO/COM on.
6.2 Flash lamp
6.2.1 When there is signal income from FLASH port(12V-24V AC/DC)
It keeps lighting when JP1 CAP connects the two pins under
It blinks  when JP1 CAP connects the two pins upper
6.2.2 When there is no signal income from FLASH port(12V-24V AC/DC)
It doesn’t work when JP1 CAP connects any two pins

Additional information
Weight 0.2 kg
Dimensions 15 × 12 × 5 cm
Model

P51033H

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Safety sensor – P51033H” Cancel reply

Your email address will not be published. Required fields are marked *

1 of 5 stars 2 of 5 stars 3 of 5 stars 4 of 5 stars 5 of 5 stars

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Safety Sensor - Key Automation 900FT33
Compare

Safety Sensor – Key Automation 900FT33

Accessories
$176.60

Ship or pick up from our office.

Safety Sensor - Key Automation 900FT33

  • NO/NC
  • AC 10-30 V / DC 10-40 V
  • Receiving Range: 25 Meters
  • IP 54
The photocell safety sensor of the FT series are devices applicable to the automation of doors and gates, which allow to detection of the presence of obstacles along the route between transmitter and receiver. Compatible with sliding and swing gate operators. Best with Key RAY, STAR swing gate operator, and SUN, TURBO sliding gate operator. Watch a video of our previous project on our YouTube channel. The Key Automation 900FT33 is a photoelectric safety sensor designed for use with automated gates and doors. It acts as a safety feature by detecting obstacles in the path of the gate or door and preventing it from closing on them. It's typically used in conjunction with sliding and swing gate operators. 
Add to wishlist
Add to cart
Quick view
Safety sensor P51022H
Compare

Safety sensor P51022H

Accessories
$78.80

Ship or pick up from our office.

Safety sensor P51022H

*NO/NC *AC/DC 12-24 V *Receiving Range: 12 Meters *IP 54 *External LED flash lamp signal (AC/DC 12V-24 V) *Internal Rotation system: 0~180   The P51022H is a safety sensor, specifically a photoelectric sensor, commonly used in automated gate and garage door opener systems. Functionality Like most photoelectric safety sensors, the P51022H works by:
  • Transmitting an infrared light beam: One part of the sensor (the emitter) sends out an invisible light beam.
  • Receiving the beam: The other part of the sensor (the receiver) is designed to detect this beam.
  • Obstruction detection: If something breaks the infrared beam while the gate or door is closing, the receiver instantly signals the opener to stop or reverse its movement. This prevents the door or gate from closing on people, pets, or objects, thus enhancing safety and preventing damage.
Applications The P51022H is primarily used in:
  • Automated gate openers: For both single swing and sliding gates, ensuring they don't close on anything in their path.
  • Garage door openers: A mandatory safety feature in most modern residential garage doors, preventing accidents.
  Key Characteristics Based on available information for similar safety sensors:
  • Type: Photoelectric sensor (often referred to as "photo eyes" or "safety beams").
  • Components: Typically comes as a kit including a sending sensor (emitter) and a receiving sensor.
  • Installation Height: These sensors are usually installed a few inches (e.g., 6 inches) above the ground to effectively detect obstacles, including small children or pets.
  • Voltage: Similar sensors often operate on 12-24V AC/DC.
It's worth noting that this specific model, P51022H, is listed as an accessory for gate opener systems, and there might be an alternative model, P51033H, which is also a photoelectric safety sensor with an integrated flashlight.
Add to wishlist
Add to cart
Quick view
Safety sensor VEDO180
Compare

Safety sensor VEDO180

Accessories
$98.65

Ship or pick up from our office.

Safety sensor VEDO180

*NO/NC *AC/DC 12-24 V *Receiving Range: 25 Meters *IP 44
Add to wishlist
Add to cart
Quick view
Safety Sensor P52000H
Compare

Safety Sensor P52000H

Accessories
$69.45

Ship or pick up from our office.

Safety Sensor P52000H

IP Rating: IP54
Certification: CE
Working Voltage: 12V-24V AC/DC
Temperature Rane: -20ºC to 60 ºC
Protection Index: IP54
Photocell Wavelength: 940nm
Receiver Range: More Than 12m
Weight: 139g
A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view
Safety Sensor S300
Compare

Safety Sensor S300

Accessories
$21.35

Ship or pick up from our office.

Safety Sensor S300

A gate opener safety sensor is a crucial component of automated gate systems designed to prevent accidents and damage by detecting obstructions in the gate's path.
These sensors, often photoelectric, use an infrared beam to monitor the area and trigger the gate to stop or reverse if something is blocking its movement. 
How it works:
  • Transmitter and Receiver:
    A safety sensor typically consists of a transmitter that emits an infrared light beam and a receiver that detects the beam.
  • Obstruction Detection:
    When an object, person, or vehicle interrupts the beam, the receiver signals the gate operator to stop or reverse the gate's movement.
  • Safety Feature:
    This mechanism prevents the gate from closing on anything or anyone, ensuring safety and preventing potential damage. 
Types of Safety Sensors:
  • Photoelectric Sensors (Photo Eyes):
    These are the most common type, using an infrared beam to detect obstructions. 
  • Safety Edges:
    These sensors are typically placed along the edge of the gate and trigger a stop or reverse when they encounter pressure. 
  • Induction Loops:
    These sensors are embedded in the ground and detect vehicles as they pass over them, triggering the gate to open or close. 
Importance:
  • Safety:
    The primary function is to prevent accidents and injuries by stopping or reversing the gate when an obstruction is present. 
  • Preventing Damage:
    By detecting obstructions, these sensors help avoid damage to the gate, vehicles, or anything else in its path. 
  • Compliance:
    Safety sensors are often required for automated gates to meet safety regulations and standards. 
Common Issues:
  • Misalignment:
    If the sensor is misaligned, the infrared beam may not reach the receiver, causing the gate to malfunction.
  • Obstructions:
    Debris, dirt, or other obstructions can interfere with the beam and trigger false alarms.
  • Sensor Failure:
    Like any electronic device, sensors can fail over time, requiring replacement. 
Add to wishlist
Add to cart
Quick view

Related products

Reflective safety sensor PQ58
Compare

Reflective safety sensor PQ58

Accessories
$116.80

Ship or pick up from our office.

Add to wishlist
Add to cart
Quick view
Wireless Keypad Access Control KW402
Compare

Wireless Keypad Access Control KW402

Access Control
$89.95

Ship or pick up from our office.

Wireless Keypad Access Control KW402

*Wireless *Rain Shield Cover included *2 Channels *LED Back Light *433 MHz
The wireless keypad access control KW402 is the preferred secure activation device for the autoslide automatic door system. This security keypad will allow you to enter your home from the outside using a unique programmed code. Combined with the VDS and ZERO gate motor, you can have a secure and automated entryway into and out of your home or workplace. The wireless keypad access control KW402 is wireless and provides the benefit of not having to run cables through your exterior walls. It has two channels that will allow you to not only have a regular access code but also one you can change for guests to access your home. The wireless keypad access control KW402 is programmable for two separate codes up to eight digits long each. Audible beeps will alert you to an accepted code as well as an invalid code.
Specifications:
Duplicate Your Existing Remote Controllers so you always have a backup:
1.Vehicle central locking systems
2. Garage doors
3. Electronic gates
4. Electrical appliances/Home automation i.e. lights
5. Car sunroofs
6. Car/Motorbike alarms Easy to use, the 4 channel remote control system lets you take control of your gets, car, home and garage

Wireless Keypad Access Control KW402:

1,This is a dual channel transmitters that are activated only after having entered a Suitable combination.
2, The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.
3,The estimated transmission range is 200 m in open space and 35m indoors .
4, The units are designed to ensure battery life equivalent to an estimated 2 years of oper-ation considering 10 transmissions/day.

Specification Wireless Keypad Access Control KW402:

Power:6Volt DC 2PCS CR2032 Li battery Battery life:2 years (4 times operation every day)
Frequency:433.92MHz+/-75KHz
Transmitter power:1Mw
Data format:standard
Work temp:-20~+55 centidegree
Password number:0-8
Water proof level:1p54
Dimension:85*75*35mm
Weight:150g
Add to wishlist
Add to cart
Quick view
Safety sensor VDS-TEC2
Compare

Safety sensor VDS-TEC2

Accessories
$88.30

Ship or pick up from our office.

Safety sensor VDS-TEC2

Technical Details:
  • NO/NC
  • AC/DC 12-24 V
  • Receiving Range: 15 Meters
  • IP 44
Universal light with barriers for any door design automation. The range can be reduced to 30% in bad weather conditions: fog, rain, dust, etc. Compatible with all models of gate openers, such as single swing, double swing, and sliding gates. When someone passes the infrared region, the detector will send an alarm signal to the control board(which is not included).
  • Compact
  • Lightweight
  • Portable
  • Easy to use
Safety sensor VDS-TEC2 works with our SIMPLY sliding gate operator or EGO swing gate opener, and all different sliding gate openers and swing gate operator brands. The VDS-TEC2 is a type of photoelectric safety sensor primarily used in automated gate and door systems, including swing and sliding gates.
Here's a breakdown of its key characteristics:
  • Function: It works by emitting an infrared light beam between two units: a sender and a receiver. If an object (like a person or vehicle) breaks this invisible beam, the sensor detects the interruption.
  • Safety Feature: When the beam is broken, the VDS-TEC2 sends a signal to the gate's control board. This triggers an action, most commonly preventing the gate from closing to avoid accidents or activating an alarm.
  • Applications: Its main application is in enhancing the safety of automated gates and doors in various settings, ensuring that they don't close on obstructions. It is compatible with different models of gate openers.
  • Technical Specifications:
    • Contacts: NO/NC (Normally Open/Normally Closed)
    • Power Supply: AC/DC 12-24 V
    • Receiving Range: Up to 15 meters (this range can be reduced in adverse weather conditions like fog, rain, or dust).
    • IP Rating: IP44 (meaning it's protected against solid objects larger than 1mm and against splashing water from any direction).
  • Design: It's described as compact, lightweight, portable, and easy to use.
In essence, the VDS-TEC2 acts as a crucial safety mechanism to prevent accidents and damage in automated gate and door operations.
Add to wishlist
Add to cart
Quick view
Keypad access control K140C101
Compare

Keypad access control K140C101

Access Control
$117.80

Ship or pick up from our office.

Keypad access control K140C101

*Rain Shield Cover *Waterproof Version *EM/ID card/tag reader *Backlight *DC 12 V *Shock resistance *1000 Users *Anti-vandal Metal shell *Doorbell button The K140C101 is a keypad access control system designed primarily for door access, especially in outdoor settings. It operates as a standalone unit, meaning it doesn't require a computer or external software for programming or operation. Here's a breakdown of its key features and functionalities:
  • Keypad and Card Reader: It combines a numeric keypad for PIN code entry and a proximity card reader, allowing users to gain access through either method or a combination of both.
  • Standalone Operation: You can program and manage users directly on the device itself.
  • Waterproof and Durable: It's designed to withstand outdoor weather conditions, making it suitable for gates, building entrances, and other exterior applications.
  • User Capacity: It typically supports a good number of users (e.g., 1000 or 2000 users, depending on the specific model)
  • Wiegand Output: It may have a Wiegand output, which allows it to be integrated with larger, more complex access control systems if needed.
  • Lock Options: It can be connected to various locking mechanisms like magnetic locks or electric strikes.
  • Security Features: It often includes features like anti-tamper alarms and can lock down for a period after multiple incorrect entries.
  • Applications: Common uses include securing small offices, residential buildings, gate entries, and commercial facilities like warehouses or labs.
In essence, the K140C101 provides a robust and convenient keyless entry solution for controlling access to various spaces.
Add to wishlist
Add to cart
Quick view
Keypad access control K170S300A
Compare

Keypad Access Control K170S300A

Access Control
$134.30

Keypad Access Control K170S300A

*Rain Shield Cover Included *Waterproof Version *EM/ID card/tag reader *Backlight *DC 12 V *Shock resistance *Anti-vandal Metal shell *Doorbell Button Wiegand Output: Equipped with a Wiegand output for seamless integration with a controller. Multiple Access Modes: Offers Card, PIN, or Card + PIN options, providing versatile access control methods. Durable Metal Case: Housed in a robust Zinc Alloy electroplated case, ensuring durability and vandal resistance. RFID Key Fob Duplicator Attribute-Based Access Control Vs Role-Based Access Control 1,000 User Capacity: Supports up to 1,000 users, ideal for large-scale access control in commercial and industrial settings. Backlight Keypad: Features a backlight keypad for easy operation in low-light conditions.

Description

1000 Users Metal Case 125KHZ RFID Card Keypad Access Controller with Backlight Door Control Independent Code Access Device Description Single door multifunction standalone access controller or a Wiegand output keypad or card reader. It is suitable for mounting either indoor or outdoor in harsh environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case which is availabl in either a bright silver or matt silver finish. Metal Case&Waterproof .Supports up to 1000 users in either a Card, 4 digit PIN, or a Card + PIN option. The inbuilt card reader supports125KHZ EM cardsLock output current short circuit protection, Wiegand output , and a backlight keypad. Ideal choice for door access not only for small shops and domestic households but als for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons. Features Simple Programming, Easy Operatio Adopt function steady card reader of block Keypad Locks for 30 Seconds After 10 False Entrie Can be Connected with Door-open Button and Doorbel Non-volatile Memory in Power Failure Tamper Switch can be Connected to Security Alarm System Backlight key Wiegand 26 output for connection to a controller Support 1000Users
Add to wishlist
Add to cart
Quick view
Hot
Swing gate opener -VDS Articulated
Compare

Dual Swing Gate Opener -VDS Articulated

Gate Automations, Dual Swing Gate Operators
$1,442.80

Ship or pick up from our office.

Product Sheet PDF

Dual Swing Gate Opener -VDS Articulated

*Suitable gate weight: Maximum 800 Kg (Per leaf) Included: *2 x Electromechanical articulated arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Safety sensor *2 x Manual release key
A swing gate opener is a device that automates the opening and closing of a swing gate, typically using a motor and a control system.
It provides a convenient and secure way to control access to a property, whether residential, commercial, or industrial. These openers can be used with various gate types, including those that swing inward or outward. 
AC DIY Double Swing Gate Automation kit (GTR058) - Richmond ...
Here's a more detailed explanation:
How it works:
  • Motor:
    A motor, powered by electricity (AC or DC), provides the force to move the gate. 
  • Control System:
    A control board receives signals from a remote control, keypad, or other access control system and activates the motor accordingly. 
  • Opening Mechanism:
    Depending on the type of swing gate opener, the mechanism can be a linear arm, an articulated arm, or an underground system. 
  • Safety Features:
    Many swing gate openers include safety features like obstruction detection, which stops the gate if it encounters an obstacle during opening or closing. 
  • Emergency Release:
    An emergency release mechanism allows manual operation of the gate in case of power failure. 
Types of Swing Gate Openers:
  • Linear Arm: These are the most common type, using a linear actuator to push or pull the gate. 
  • Articulated Arm: These use a hinged arm to move the gate, reducing strain on the hinges. 
  • Underground: The motor and mechanism are installed underground, providing a more discreet appearance. 
  • Dual Swing: These openers are designed for gates that swing open from the center. 
Benefits of using a swing gate opener:
  • Convenience: Automatic opening and closing of the gate with the press of a button or remote control.
  • Security: Prevents unauthorized access to the property.
  • Enhanced Property Value: Adds a layer of sophistication and security to the property.
  • Accessibility: Can be particularly useful for people with mobility issues. 
Add to wishlist
Add to cart
Quick view
Exit Button SQTPB801
Compare

Exit Button SQTPB801

Accessories
$22.85

Ship or pick up from our office.

Exit Button SQTPB801

*Touch *Backlight *DC 12V *COM-NC-NO
An exit button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms. 
Here's a more detailed explanation:
  • Function:
    An exit button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit. 
  • Purpose:
    They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available. 
  • Types:
    Exit buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them. 
  • Importance:
    These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals. 
  • Applications:
    Exit buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities. 
Add to wishlist
Add to cart
Quick view
Keypad Access Control V2000
Compare

Keypad Access Control K110V2000

Access Control
$96.05

Keypad Access Control K110V2000

*Waterproof Version *EM - RFID card/tag reader *Finger Touch *Backlight *DC 12 V *1000 Users *Doorbell button *Rain Shield Cover Included
The Keypad Access Control K110V2000 is a standalone access control system designed for single-door access, typically used for residential or small-to-medium commercial buildings.
It allows users to unlock the door using either a proximity card, a PIN code, or a combination of both. 
Here's a more detailed breakdown:
Key Features:
  • Multiple User Capacity: It can support up to 1000 users. 
  • Multiple Access Methods: Users can unlock the door using RFID cards, PIN codes, or both. 
  • Standalone Operation: It functions independently, without needing to be connected to a central computer. 
  • Wiegand Input/Output: It can connect to an external card reader (Wiegand 26 input) and a controller (Wiegand 26 output). 
  • Tamper Alarm: Includes a tamper alarm for added security. 
  • Backlit Keypad: The keypad is backlit, making it easier to use in low-light conditions. 
  • Short Circuit Protection: The output is automatically turned off if there's a short circuit in the electric lock or alarm output. 
  • Waterproof: Some models, like the V2000-C, are waterproof, making them suitable for outdoor use. 
  • Easy Installation and Programming: The system is designed for straightforward installation and programming. 
  • Doorbell Input: Some models include a doorbell input. 
  • Adjustable Settings: Features like door output time, alarm time, and door open time can be adjusted. 
Applications:
  • Residential Buildings: Ideal for controlling access to apartments or individual homes.
  • Small to Medium Businesses: Suitable for offices, shops, and other commercial spaces.
  • Warehouses and Factories: Can be used to manage access to secure areas.
  • Other Applications: Laboratories, banks, and even prisons. 
Add to wishlist
Add to cart
Quick view

We are proud to provide you with driveway gate operator services and accessories. We have more than 28 years of experience in selling, installing, maintaining, and repairing electronic accessories for homes with the latest technology.
• #100 - 11538 132a St, Surrey, BC, V3R 7S2
• Sales Dep.: (778)384-2800
• Service Dep.: (778)561-4530
• info@retcc.ca

Recent Posts
  • USB Gate Operator Remote
    USB Remote Gate Opener
    6 March 2025 No Comments
  • Micro Limit Switch
    Problem with Sliding Gate Opener Limit Switch
    19 February 2025 No Comments
  • Embrace the Wintertime and Enjoy Your Automatic Gate Opener
    Embrace the Wintertime and Enjoy Your Automatic Gate Opener
    6 February 2025 No Comments
  • gate not close
    How to Repair an Automatic Gate when the Gate not Close
    9 December 2024 No Comments
Useful Links
  • Warranty Rules
  • Terms of Your Order
Powered By Elixir Graphic © Copyright 2023
payments
  • Home
  • Shop
  • Blog
  • About us
  • Contact us
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Start typing to see products you are looking for.
wpChatIcon
wpChatIcon
Shop
0 items Cart
Free Estimate