Programmable timer relay
Click to enlarge
Pedestrian gate manual lock (One side key)
Pedestrian gate manual lock (One side key) $55.75
Back to products
Digital programmable ON/OFF relay
Digital programmable ON/OFF relay $44.60

Programmable timer relay

$40.80

Ship or pick up from our office.

Programmable timer relay

A programmable timer relay is an electronic device that combines the functions of a timer and a relay, allowing users to set specific time delays for switching electrical circuits on or off. Essentially, it acts as an automated switch that operates based on pre-programmed time intervals. This enables the automation of various processes and equipment across a wide range of applications.

How it Works

Programmable timer relays incorporate internal circuitry (often microcontrollers or digital logic chips) that allow for precise timekeeping and control. Here’s a general overview of how they function:

  1. Control Signal: The programmable timer relay receives an input or “trigger” signal, which initiates the timing process. This signal can come from a switch, sensor, or another control device.
  2. Timing Mechanism: Once the signal is received, the internal timing mechanism begins to count down or up based on the programmed parameters.
  3. Delay Period: During this delay, the relay’s contacts remain in their initial state (either normally open or normally closed).
  4. Contact Switching: Once the programmed delay period elapses, the relay’s contacts change state, either closing to allow current to flow or opening to interrupt it.
  5. Maintaining State & Resetting: The relay maintains its new state until the input signal is removed, or a reset function is triggered. Programmable relays offer various timing modes, such as:
    • On-delay: The relay activates after a set delay once the input signal is applied.
    • Off-delay: The relay deactivates after a set delay once the input signal is removed.
    • Interval: The relay activates for a set period and then deactivates.
    • Cyclic: The relay repeatedly alternates between on and off states for specified durations.

Users can typically configure these timing modes and sequences through a digital interface, often with an LCD or LED display for easy setup and monitoring.

 

Applications

Programmable timer relays are incredibly versatile and are used in numerous applications to enhance efficiency, save energy, and improve safety:

  • Industrial Automation: They control the sequencing of machinery, conveyor belts, pumps, and other equipment in manufacturing processes, ensuring precise timing and preventing system overloads.
  • Lighting Control: Used in homes, commercial buildings, and street lighting to turn lights on and off at specific times or based on ambient light levels, optimizing energy consumption and security.
  • HVAC Systems: Regulate fan operations, compressor cycles, and defrost cycles in heating, ventilation, and air conditioning systems to maintain desired temperatures and reduce energy use.
  • Security Systems: Implement delays for door locks, alarm systems, and surveillance cameras, allowing for controlled access and scheduled activation/deactivation.
  • Pump Control: Manage water pumps, sewage pumps, and sump pumps, ensuring they operate only when needed, which conserves water and prevents pump damage.
  • Home Automation: Automate various household appliances like irrigation systems, washing machines, and dishwashers.
  • Vehicle Systems: Control functions like intermittent windshield wipers and turn signals.

 

Advantages

Programmable timer relays offer several benefits over traditional, non-programmable timer relays or complex PLC (Programmable Logic Controller) systems for certain applications:

  • Versatility and Customization: They can be programmed for various timing functions and sequences within a single unit, offering great flexibility for diverse applications.
  • Energy Savings: By automating on/off cycles and ensuring equipment runs only when necessary, they help reduce energy consumption and costs.
  • Increased Efficiency: They enable automated control of equipment and processes, improving overall operational efficiency and reducing the need for manual intervention.
  • Reduced Components and Wiring: By integrating multiple timing and switching functions into one device, they can replace several individual timers and relays, simplifying wiring, reducing component inventory, and saving space in control panels.
  • Cost-Effectiveness: For simpler automation tasks, they offer a more economical solution compared to full-fledged PLCs.
  • Ease of Use: Many programmable timer relays feature user-friendly digital interfaces or software, making them relatively easy to configure without requiring extensive programming knowledge.
  • Precise Time Control: They offer high temporal precision, with delays ranging from milliseconds to several hours.
  • Troubleshooting: Integrated displays often provide alarm messages and I/O status, simplifying troubleshooting.
Compare
Add to wishlist
Category: Tags: , , , , ,
Description

Programmable timer relay

*DC 12 V

*NC/NO

A programmable timer relay is an electronic device that combines the functionality of a timer and a relay.

It allows users to set specific time delays for switching electrical circuits on or off, enabling automation of various processes and equipment. These relays are programmable, meaning users can configure different timing modes and sequences through digital interfaces. 

Here’s a more detailed explanation:
Core Functionality:
  • Timing:

    Programmable timer relays offer a wide range of timing functions, including on-delay, off-delay, and interval timing. 

  • Relay:

    They act as a switch, controlling the flow of electrical current to connected devices based on the programmed time intervals. 

  • Programmability:

    Users can set specific on/off times, durations, and sequences through a digital interface or software, often with a display for easy configuration. 

Key Features:
  • Versatile Applications:

    Programmable timer relays are used in various applications, including industrial automation, lighting control, heating and cooling systems, and more. 

  • Energy Savings:

    By automating on/off cycles, these relays can help reduce energy consumption and costs. 

  • Increased Efficiency:

    The programmable timer relay enable automated control of equipment and processes, improving overall efficiency and reducing manual intervention. 

  • Customization:

    Programmable timer relays allow for tailored timing sequences to match specific operational needs. 

In essence, a programmable timer relay is a versatile tool that combines timing and switching capabilities, offering automation and control solutions for a wide range of applications. 
Additional information
Weight 0.08 kg
Dimensions 4 × 4 × 8 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Programmable timer relay”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Delay relay 0.5 Sec - AC 24 V to AC 24 V
Compare

Delay relay 0.5 Sec – AC 24 V to AC 24 V

$42.55

Ship or pick up from our office.

Delay relay 0.5 Sec - AC 24 V to AC 24 V

delay relay 0.5 Sec - AC 24 V to AC 24 V is a type of electrical relay that introduces a 0.5-second time delay in a circuit, specifically designed to operate with a 24-volt AC (Alternating Current) power supply. This means that when the control voltage (24V AC) is applied or removed, the relay's output contacts won't change their state immediately; instead, there will be a half-second pause before they do. Here's a breakdown of what each part of the description means:
  • Delay Relay (or Time Delay Relay/Timer Relay): This is a control device that, unlike a standard relay, incorporates a timing function. It's used to control an event based on a pre-selected time interval.
  • 0.5 Sec: This specifies the duration of the time delay. In this case, it's a very short half-second delay. Time delays can range from milliseconds to hours or even days, depending on the relay.
  • AC 24 V (Input/Control Voltage): This indicates the type and voltage of the power supply required to energize the relay's coil or internal control circuitry. "AC" means Alternating Current, and "24 V" is the nominal voltage.
  • to AC 24 V (Output/Load Voltage): While not explicitly stated as "output," this implies that the relay is likely intended to switch a 24V AC load. This means the contacts within the relay are rated to handle 24V AC to control another part of the circuit or a device. It's important to note that the load voltage can sometimes be different from the control voltage, but in this specific phrasing, it suggests both are 24V AC.
How it Works A time delay relay operates using an internal timing circuit, which can be electronic (using components like capacitors, resistors, and microcontrollers) or electromechanical. When the input voltage (24V AC) is applied, the timing circuit is triggered. Once the preset delay (0.5 seconds) elapses, the relay's contacts will change their state (either closing normally open contacts or opening normally closed contacts), thereby activating or deactivating the connected load. Types of Delay Functions Delay relays come in various functions, and the "0.5 Sec - AC 24 V to AC 24 V" relay could be one of several types:
  • On-Delay (Normally-Open, Timed-Closed - NOTC): The most common type. When the control voltage is applied, the timing period begins. After 0.5 seconds, the output contacts close. The contacts remain closed as long as the control voltage is present.
  • Off-Delay (Normally-Open, Timed-Open - NOTO): When the control voltage is applied, the output contacts close immediately. When the control voltage is removed, the 0.5-second delay begins. After this delay, the contacts open.
  • One-Shot: Provides a single output pulse of a specified duration (in this case, 0.5 seconds) when triggered.
  • Repeat Cycle: Alternates between ON and OFF states for defined durations, creating a repeating cycle. This particular relay with a fixed 0.5-second delay is less likely to be a multi-function repeat cycle unless it's just one setting within a programmable unit.
To know the exact function, you'd need to consult the relay's datasheet or part number. Common Applications Delay relays are crucial in various control and automation systems where precise timing is essential. For a 0.5-second delay, typical applications might include:
  • Sequencing Operations: Ensuring one component starts or stops slightly after another in a controlled sequence.
  • Motor Control: Providing a brief delay before starting a motor (e.g., for pre-lubrication pumps to stabilize).
  • Safety Interlocks: Implementing a short delay to ensure certain conditions are met before an action can occur.
  • HVAC Systems: Timing the activation or deactivation of fans, compressors, or other components.
  • Conveyor Systems: Coordinating the starting or stopping of multiple conveyor belts to prevent material jams.
  • Lighting Control: For example, a short delay before turning on a light in a specific area
Add to wishlist
Add to cart
Quick view
Delay relay 0.5 Sec - AC 24 V to AC 24 V
Compare

Delay relay 0.5 Sec – AC 24 V to DC 12 V

$62.15

Ship or pick up from our office.

Delay relay 0.5 Sec - AC 24 V to DC 12 V

A "delay relay 0.5 Sec - AC 24 V to DC 24 V" is a time delay relay that is designed to:
  • Operate with a control voltage of 24 volts, which can be either Alternating Current (AC) or Direct Current (DC). This dual compatibility (AC/DC 24V) is a key feature, as many relays are specific to one type of current.
  • Introduce a delay of 0.5 seconds before its contacts change state. This delay can be an "on-delay" (contacts close/open after 0.5 seconds when power is applied) or an "off-delay" (contacts remain closed/open for 0.5 seconds after power is removed), or other timing functions depending on the specific relay's design.
  • Switch or control a separate circuit, which may be a 24V DC circuit. The "AC 24V to DC 24V" in the description refers to the relay's input power compatibility (it can be powered by either 24V AC or 24V DC) and its output capability (it's often used to control 24V DC loads). It is not a direct AC to DC converter for the load it's switching, but rather indicates its flexible control voltage. The relay itself doesn't convert the power; it merely switches it on or off after a delay. If the controlled circuit specifically requires DC, the relay's contacts would simply switch the 24V DC power to that circuit.
Essentially, it's a versatile timing device used in control systems.   Purpose of Time Delay Relays Time delay relays are crucial in various applications where precise timing of electrical events is required. They serve to:
  • Prevent false triggering: A brief fluctuation in voltage or a momentary signal might cause immediate activation in a standard relay. A short delay (like 0.5 seconds) can prevent such nuisance activations.
  • Create timed sequences: In automated processes, certain steps may need to occur in a specific order with set delays in between. For example, a delay relay could ensure one motor starts before another or that a safety purge cycle completes before a furnace ignites.
  • Control motor starts/stops: They can be used for "soft starting" motors, gradually increasing voltage to reduce inrush current, or for ensuring a motor has fully stopped before another action begins.
  • HVAC systems: They prevent "short cycling" of compressors, which can damage the unit, by introducing a delay between successive starts.
  • Lighting control: Ensuring lights stay on for a set period after activation (e.g., in stairwells) or controlling emergency lighting.
  • Security systems: Providing a brief delay before an alarm triggers, allowing authorized personnel to disarm the system.
Types of Time Delay Relays While the "0.5 Sec" refers to the specific delay, time delay relays come with various functions:
  • On-delay (Delay on Make): The most common type. The contacts change state only after the set time delay has elapsed after the control voltage is applied.
  • Off-delay (Delay on Break): The contacts change state immediately when the control voltage is applied, but only return to their original state after the set time delay has elapsed after the control voltage is removed.
  • Interval: The contacts change state immediately when the control voltage is applied, and then return to their original state after the set time delay.
  • Repeat Cycle: The relay continuously cycles between on and off states with specific time delays as long as the control voltage is applied.
In the case of a "delay relay 0.5 Sec", it would likely be an on-delay or interval type, but the exact function would need to be confirmed from the specific model's datasheet.   AC/DC 24V Compatibility The "AC 24 V to DC 24 V" part primarily indicates the coil voltage compatibility of the relay. Many modern time delay relays are designed to accept a wide range of input voltages, including both AC and DC, within a specified range (e.g., 24V AC/DC). This offers flexibility in wiring and application, as the relay can be integrated into systems powered by either AC or DC at that voltage level. It's important to distinguish that this relay itself is not a voltage converter (like a power supply that converts AC to DC). Instead, it's a switching device. If the circuit you are trying to control requires DC and your power source is AC, you would need a separate AC to DC power converter (like a power supply unit) to provide the 24V DC to your load, which the relay's contacts would then switch.
Add to wishlist
Add to cart
Quick view
Radio receiver
Compare

Remote Control Radio Receiver

$59.45

Ship or pick up from our office.

Remote Control Radio Receiver

  • NC/NO Output
  • Easy to program new remotes
  • The remote control button is covered to prevent accidental pressing.
  • This radio receiver can be added to almost all the gate operators such as Italian, Chinese, swing gate operators, sliding gate operators, and overhead garage doors.
  • Compatible with 100 remotes.
  • Small case and easy to install
  • The wireless RF signals can pass through walls, floors, doors, or windows. You can use two or more units in the same place.
A gate opener's remote control radio receiver is a device that receives radio signals from a handheld remote control, triggering the gate opener's motor to open or close the gate.
Here's a more detailed explanation:
  • Receives Signals:
    The receiver picks up radio waves transmitted by the remote control. 
  • Decodes Commands:
    It interprets the specific signal pattern to understand the desired action (e.g., open, close, stop). 
  • Controls Devices:
    The receiver then sends signals to the gate opener's motor, causing it to move the gate accordingly. 
  • Part of a System:
    It's a crucial component of the remote control system, working with the transmitter (remote) to enable wireless control of the gate. 
  • Frequency:
    Gate opener receivers typically operate on frequencies like 433 MHz or 315 MHz. 
  • Installation:
    The receiver is usually wired to the gate operator's control board and may require programming to associate it with specific remote controls. 
Add to wishlist
Add to cart
Quick view
Door Strike Lock
Compare

Door Strike Lock

$69.95

Ship or pick up from our office.

Door Strike Lock

*Fail-Secure/Fail-Safe *Capacity: 100 Kg *DC 12 V
An electric strike is an electromechanical lock release device that replaces a standard door strike plate.
It allows a door to be opened remotely, typically via an access control system, without manually retracting the latch. When activated, the electric strike releases the latch, enabling the door to be opened. 
Here's a more detailed explanation:
Functionality:
  • Replaces Standard Strike:
    Electric strikes are installed in the door frame, taking the place of the standard strike plate. 
  • Remote Release:
    They are designed to work with various access control systems, such as keypads, card readers, or intercoms. 
  • Activation:
    When an authorized signal is received (e.g., a code is entered, a card is swiped), the electric strike releases the latch, allowing the door to be opened. 
  • Fail-Safe or Fail-Secure:
    Electric strikes can be configured in either a fail-safe or fail-secure mode. 
    • Fail-safe: In this mode, the door unlocks when power is lost, making it suitable for safety applications where access is needed during power outages. 
    • Fail-secure: In this mode, the door remains locked when power is lost, requiring power to unlock, making it suitable for high-security applications. 
How it Works:
  • The electric strike contains a solenoid, which is an electromagnet.
  • When the solenoid is activated by an electrical signal, it moves a component (like an armature) that allows the latch to move freely.
  • This movement releases the door, allowing it to be opened. 
Key Differences from Other Locks:
  • Electric vs. Magnetic Locks:
    Unlike magnetic locks, which use powerful magnets to hold the door closed, electric strikes release the latch mechanism. 
  • Remote Access:
    Electric strikes offer remote access control, allowing doors to be unlocked without manual intervention. 
  • Versatility:
    They can be used with various locking mechanisms, including cylindrical, mortise, and rim exit devices. 
Common Applications:
  • Access Control:
    Electric strikes are a core component of access control systems in commercial and residential settings. 
  • Security:
    They provide a higher level of security compared to standard locks, especially when used with fail-secure configurations. 
  • Safety:
    In fail-safe configurations, they ensure safe egress during emergencies. 
  • Specific Areas:
    They are commonly found in reception areas, daycare centers, and other locations where controlled access is needed. 
Add to wishlist
Add to cart
Quick view

Related products

Hot
swing gate opener NICE Wingo 4024
Compare

Double Swing Gate Opener NICE -Wingo 4024

,
$1,363.45

Ship or pick up from our office.

Product Sheet PDF

Double Swing Gate Opener NICE -Wingo 4024

*Suitable gate weight: Maximum 400 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Operators are designed to fit a wide range of settings and applications. The Double Swing Gate Opener NICE - Wingo 4024 is an electromechanical gear motor system designed for automating double swing gates. It's primarily used for residential and light industrial applications, offering a convenient and secure way to open and close gates without manual effort. Here's a breakdown of its key features and specifications: Key Features
  • Electromechanical Gear Motor: It utilizes a 24 Vdc electromechanical gear motor, known for its reliability and quiet operation.
  • Suitable for Various Gate Sizes: It can handle swing gates with individual leaves up to 2 meters in length or up to 400 kg in weight (for a gate leaf of 1 meter).
  • Surface Mounted: The system is designed for surface mounting, meaning the motors are installed directly onto the gate posts or pillars.
  • Easy Installation: Electrical connections are made from above the gear motor, simplifying the installation process.
  • User-Friendly Release: In case of a power failure, the gate can be manually unblocked and moved with a personalized Nice key or standard lock (optional).
  • Moonclever Control Unit (MC424L/MC824H): This advanced control unit offers several intelligent functions:
    • Simple Programming: Easy setup with a single button.
    • Automatic Memorization: Self-learning function for limit switches on opening and closing.
    • Anti-Crush Safety: Features a clutch with an anti-crush safety device to prevent damage or injury.
    • Obstacle Detection: Uses dual technology to detect obstacles during operation.
    • Programmable Functions: Allows for programming of pause time, pedestrian pass door function, and deceleration at the beginning and end of cycles.
    • Battery Backup Option: Can operate during power failures with optional rechargeable batteries (PS124/PS324) that fit inside the control unit.
    • Resistive Sensitive Edge Connection: Can be connected to 8.2 KOhm resistive sensitive edges for enhanced safety.
  • Durable Construction: Features tough aluminum shells with polyester paint finish, making it resistant to atmospheric agents. Internal moving parts are made of steel, light alloys, and techno-polymers for durability.
  • Mechanical Limit Switches: Includes pre-assembled mechanical limit switches for setting the open position.
Add to wishlist
Add to cart
Quick view
Swing gate opener -Zero ZSW400
Compare

Dual swing gate opener -ZERO ZSW600

,
$1,428.70

Ship or pick up from our office.

Dual swing gate opener -ZERO ZSW600

*Suitable gate weight: Maximum 300 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Add to cart
Quick view
Exit push button SQTPB701H
Compare

Exit Push Button SQTPB701H

$29.75

Ship or pick up from our office.

Exit Push Button SQTPB701H

*No Touch *Backlight *DC 12V *COM-NC-NO
A wave exit push button, also known as a touchless exit button or wave-to-exit switch, is a device that allows users to open a door without physically touching it.
It uses motion sensing technology, typically infrared or microwave, to detect a hand gesture and trigger the door to open. This provides a more hygienic and convenient way to exit a space, especially in environments where minimizing physical contact is desirable. 
Here's a more detailed explanation:
Functionality:
  • Touchless Activation:
    The core function is to activate a door release mechanism (like a magnetic lock or strike) with a simple wave of the hand. 
  • Motion Sensing:
    Wave exit buttons utilize sensors (infrared or microwave) to detect the movement of a hand or object in front of the device. 
  • Contactless Exit:
    This eliminates the need to physically push a button, reducing the spread of germs and providing a more hygienic exit solution. 
Common Applications:
  • Healthcare facilities: Hospitals, clinics, and laboratories where hygiene is paramount. 
  • Food service and preparation areas: Restaurants and kitchens where cleanliness is crucial. 
  • High-traffic areas: Office buildings, schools, and public spaces where many people need to exit frequently. 
  • Disabled access: Provides a convenient and accessible way for individuals with mobility limitations to exit. 
Benefits:
  • Hygiene:
    Reduces the risk of spreading germs and viruses by eliminating the need to touch a button. 
  • Convenience:
    Allows for hands-free operation, making it easier to exit with arms full or for individuals with mobility limitations. 
  • Durability:
    Often more durable than traditional push buttons due to fewer moving parts. 
  • Accessibility:
    Provides a more inclusive exit solution for all individuals. 
Add to wishlist
Add to cart
Quick view
Compare

Underground Exit Wand Vehicle Detector

$187.30
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS MP110
Compare

Dual swing gate opener -VDS MP110

,
$1,230.35

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener -VDS MP110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor The VDS MP110 is a model of electromechanical swing gate opener manufactured by VDS Automation. It's designed for automating single or double leaf swing gates, commonly used for residential and light-industrial applications. Here's a breakdown of its key features and specifications: Key Features
  • Suitable Gate Size and Weight:
    • It can handle gates with a maximum weight of up to 200 kg (per leaf).
    • It supports gate leaf lengths ranging from 1.80 meters up to 3.50 meters.
  • Durable Construction: It features a sturdy aluminum structure and a strong rolled warm shaft, indicating robust build quality for longevity.
  • Quiet Operation: The VDS MP110 is known for its very quiet operation.
  • Safety Features:
    • Anti-squashing system (EN 12453): This is a crucial safety feature that prevents the gate from exerting excessive force if it encounters an obstruction, minimizing the risk of injury or damage.
    • Slowing down function (EN 12453): This allows the gate to slow down before reaching its fully open or closed position, ensuring smoother operation and reducing impact.
    • Thermal cut-out 140°: This protects the motor from overheating.
  • Manual Release: It includes a manual release with a key, allowing you to operate the gate manually in case of a power outage.
  • Lubrication: Mechanical parts are lubricated with lithium grease to protect against corrosion, oxidation, and rust.
  • Opening Angle: It offers a 120° opening capability. Some systems can be further enhanced for a 180-degree opening with optional chain drive systems.
  • Easy Installation: It is designed for quick installation with multi-position brackets and technopolymer covers for the brackets.
  • Motor and Power: It features a high-performance electric motor and typically operates on a 120V AC power supply, though some versions may support 24V DC.
  • Limit Switches: It has a standard opening limit switch, with an optional closing limit switch.
Variants The VDS MP110 series likely includes variations with different rod stroke lengths (e.g., 300mm, 400mm, 500mm), which determine the maximum gate leaf length they can accommodate.
Add to wishlist
Add to cart
Quick view
Smart Video Doorbell
Compare

Smart Video Doorbell

$169.35

Ship or pick up from our office.

Smart Video Doorbell

*WiFi connection *Android/IOS app on the smartphone *Answer visitors using smartphone worldwide
Add to wishlist
Add to cart
Quick view
Keypad access control K140C101
Compare

Keypad access control K140C101

$117.80

Ship or pick up from our office.

Keypad access control K140C101

*Rain Shield Cover *Waterproof Version *EM/ID card/tag reader *Backlight *DC 12 V *Shock resistance *1000 Users *Anti-vandal Metal shell *Doorbell button The K140C101 is a keypad access control system designed primarily for door access, especially in outdoor settings. It operates as a standalone unit, meaning it doesn't require a computer or external software for programming or operation. Here's a breakdown of its key features and functionalities:
  • Keypad and Card Reader: It combines a numeric keypad for PIN code entry and a proximity card reader, allowing users to gain access through either method or a combination of both.
  • Standalone Operation: You can program and manage users directly on the device itself.
  • Waterproof and Durable: It's designed to withstand outdoor weather conditions, making it suitable for gates, building entrances, and other exterior applications.
  • User Capacity: It typically supports a good number of users (e.g., 1000 or 2000 users, depending on the specific model)
  • Wiegand Output: It may have a Wiegand output, which allows it to be integrated with larger, more complex access control systems if needed.
  • Lock Options: It can be connected to various locking mechanisms like magnetic locks or electric strikes.
  • Security Features: It often includes features like anti-tamper alarms and can lock down for a period after multiple incorrect entries.
  • Applications: Common uses include securing small offices, residential buildings, gate entries, and commercial facilities like warehouses or labs.
In essence, the K140C101 provides a robust and convenient keyless entry solution for controlling access to various spaces.
Add to wishlist
Add to cart
Quick view
Reflective safety sensor PQ58
Compare

Reflective safety sensor PQ58

$116.80

Ship or pick up from our office.

Add to wishlist
Add to cart
Quick view