Royal gates
Sliding gate opener – Royalgate RGSL1.5TN
Ship or pick up from our office.
Sliding gate opener –Royalgate RGSL1.5TN
*Suitable gate weight: Maximum 1500 Kg Included: *1 x Electromechanical motor *1 x Main control board *4 Meters x SLGR41 Gear rack *2 x Remote control *2 x Manual release keySliding gate opener – Royalgate RGSL1TN
Ship or pick up from our office.
Sliding gate opener –Royalgate RGSL1TN
*Suitable gate weight: Maximum 1000 Kg Included: *1 x Electromechanical motor *1 x Main control board *4 Meters x SLGR41 Gear rack *2 x Remote control *2 x Manual release key Reliability and safety are at the base of the mechanical components: produced with sturdy materials, they turn on large ball bearings that are attached to die-cast aluminum housings. The endless screw is made of rolled steel and the internal gear has involute teeth. This special construction increases significantly the gear's life by decreasing its friction. The result: quiet movement, high performance, and no wear. This product is the kit solution for sliding gate installation with double sliding. Two operators, one with a control unit for perfect synchronization of the motors and accessories.
Sliding gate opener – Royalgate RGSLC800
Sliding gate opener –HiGate HGSL0.6T
Ship or pick up from our office.
Sliding gate opener –HiGate HGSL0.6T
Sliding gate opener –HiGate HGSL1.5T
Ship or pick up from our office.
Sliding gate opener –HiGate HGSL1.5T
Sliding gate opener –HiGate HGSL2T
Ship or pick up from our office.
Sliding gate opener –HiGate HGSL2T
Sliding gate opener –KeyAutomation TURBO4224
Ship or pick up from our office.
Product Sheet PDFSliding gate opener –KeyAutomation TURBO4224
High-quality Italian-made with state-of-the-art technology and design. Sliding gate opener Key Automation TURBO4224 Open gates weighing up to 400 KG effortlessly with this gear rack-driven sliding gate opener. It is designed with a 24V DC motor, which provides exceptional torque, and its continuous operation makes it ideal for most applications. The kit includes a 13 ft nylon gear rack track, and if your gates are more than 13 ft in length, you can opt for an extra rack.- Opens gates weighing up to 400 kg
- Easy to install and programming
- Get the desired torque and tension by adjusting the parameters on the control board
- Easy to add new remotes
- Emergency release key in case of power failure
- Stop/Reverse in case of obstruction during gate closing
- Built-in adjustable auto-close
- Reliable spring limit sensor for easy adjustment
- Optional accessories such as keypads, remote controls, radio receivers, and safety sensors can also be integrated
Sliding gate opener –Royalgate RGSL0.3T
Ship or pick up from our office.
Sliding gate opener –Royalgate RGSL0.3T
*Suitable gate weight: Maximum 300 Kg Included: *1 x Electromechanical motor *1 x Main control board *4 Meters x SLGR41 Gear rack *2 x Remote control *2 x Manual release key Open gates weighing up to 660 lbs effortlessly with this gear rack-driven sliding gate opener. It is designed with a 110V AC motor which provides exceptional torque and its continuous operation makes it ideal for most applications. 13 ft nylon gear rack track is included in the kit and if your gates are more than 13 ft in length then you can opt for an extra rack.- Opens gates weighing up to 660 lb
- Easy to install
- Get the desired torque and tension by adjusting the potentiometer
- Easy to add new remotes
- Emergency release key in case of power failure
- Stop/Reverse in case of obstruction during gate closing
- Built-in adjustable auto-close (0, 30, 60, 90 seconds)
- Reliable electromagnetism limit sensor for easy adjustment
- Optional accessories such as keypads, remote control radio receivers, and safety sensors can also be integrated
Sliding gate opener –Royalgate RGSL0.8TND
Ship or pick up from our office.
Sliding gate opener –Royalgate RGSL0.8TND
Sliding gate operator chain
Ship or pick up from our office.
Sliding gate operator chain
Sliding gate operator gear
Ship or pick up from our office.
Sliding gate operator gear
A sliding gate operator gear refers to the toothed gear or rack and pinion system that facilitates the movement of a sliding gate.
This system typically consists of a toothed metal bar (the rack) attached to the gate and a motorized pinion gear that engages with the rack, causing the gate to slide open and closed.
Here's a more detailed explanation:
-
Rack:This is a toothed bar, usually made of steel or nylon-reinforced steel, mounted along the bottom of the sliding gate.
-
Pinion Gear:This gear is connected to the motor of the gate operator. When the motor rotates, the pinion gear engages with the rack's teeth, causing the gate to move.
-
Operation:The rotation of the pinion gear drives the gate along the track, either opening or closing it, depending on the direction of rotation.
-
Materials:While some racks are made of all-metal, nylon racks with a steel core are popular due to their lightweight nature, durability, and resistance to rust and wear.
Sliding gate operator limit sensor – Magnetic mechanism
Ship or pick up from our office.
Sliding gate operator limit sensor - Magnetic mechanism
A sliding gate operator limit sensor, often a limit switch, is a crucial component that signals the gate operator when the gate has reached its fully open or fully closed position, stopping the motor and preventing over-travel. These sensors ensure the gate stops at the correct positions, preventing damage to the gate and surrounding structure.
Here's a more detailed explanation:
-
Function:Limit sensors, like limit switches, detect when the gate reaches its extreme open or closed positions.
-
How it works:When the gate reaches the limit, the sensor sends a signal to the gate operator's control board, which then stops the motor.
-
Importance:Without limit sensors, the gate might continue to move, potentially hitting the end posts or other obstructions, causing damage.
-
Types:Common types include magnetic limit switches and photoelectric sensors (photo eyes).
-
Magnetic Limit Switches:These utilize magnets placed on the gate and a magnetic sensor on the operator. When the magnet aligns with the sensor, it triggers the limit switch.
-
Photoelectric Sensors (Photo Eyes):These use infrared beams to detect obstructions. When the beam is broken (e.g., by the gate), the sensor signals the operator to stop.
-
Installation:Proper installation and adjustment of limit sensors are crucial for the reliable operation.
-
Maintenance:Regular inspection and maintenance of limit sensors are recommended, as they can wear out or become misaligned over time.
