Sliding gate operator gear rack -SLGR2

$9.55

Ship or pick up from our office.

Sliding gate operator gear rack -SLGR2

The Sliding Gate Operator Gear Rack SLGR2 is a specific type of toothed bar used in conjunction with a sliding gate operator (motor) to convert its rotational power into the linear motion needed to open and close a sliding gate. Let's break down what SLGR2 likely refers to and its characteristics: Function of a Gear Rack:
  • Linear Motion: The Sliding Gate Operator Gear Rack SLGR2 is essentially a straight "rack" of teeth that meshes with a small circular gear called a pinion, which is attached to the shaft of the sliding gate operator's motor.
  • Power Transmission: As the pinion spins, its teeth engage with the teeth of the gear rack, pushing or pulling the gate horizontally along its track. This is how the motor physically moves the gate.
Key Features of the SLGR2 Gear Rack: Based on the search results, particularly from Royal Gate (which operates in Surrey, BC):
  • Length: The Sliding Gate Operator Gear Rack SLGR2 is specified as being 340 mm (millimetres) in length. This is a relatively short segment. Sliding gates often require multiple sections of gear rack to be joined together to span the entire length of the gate, as most gates are much longer than 340mm.
  • Mounting Holes: It has "2 Holes". These holes are pre-drilled for easy attachment to the bottom frame of the sliding gate using screws or bolts.
  • Material: While the exact material for this specific SLGR2 is not explicitly stated in all listings, gear racks are commonly made from:
    • Steel (most common): Offers high strength, durability, and resistance to wear, making it suitable for heavy gates and high-traffic applications. Often galvanized or treated for corrosion resistance.
    • Nylon with a Steel Core: A popular alternative. The nylon exterior provides quieter operation and good corrosion resistance, while the internal steel core offers the necessary strength and stability for the gate's weight and movement. This is a good balance of properties.
    • Less commonly, other plastics or stainless steel are used for specific applications.
  • "Module": While not explicitly stated for SLGR2, gear racks (and their mating pinions) adhere to a "module" standard (e.g., Module 2, Module 4). The module defines the size of the teeth and the spacing between them, ensuring that the gear rack properly meshes with the pinion gear of the specific sliding gate operator it's intended for. The SLGR2 would have a specific module that matches the operators sold by Royal Gate.
Where you'd use it: The Sliding Gate Operator Gear Rack SLGR2 is used in conjunction with gear rack sliding gate operators. These are the most common type of automatic opener for sliding gates, where the gate itself has wheels that run on a ground track (as opposed to cantilever gates). In the context of Vancouver, BC: If you are looking for parts for a sliding gate operator system in Canada, Royal Gate is a local supplier that specifically lists the SLGR2 gear rack. This means it's a standard replacement part or component they offer for their range of sliding gate operators. When purchasing, it's crucial to ensure the SLGR2 (or any gear rack) is compatible with the "module" of your existing gate operator's pinion gear for proper meshing and operation.

Sliding gate operator gear rack -SLGR41

$14.45

Ship or pick up from our office.

Sliding gate operator gear rack -SLGR41

*4 Holes *Length: 1018 mm The SLGR41 is a gear rack specifically designed for sliding gate operators. It's a crucial component that works in conjunction with the gate motor's pinion gear to move the gate open and closed. Here's a breakdown of its characteristics:
  • Function: It provides the linear motion for a sliding gate when engaged with the rotating pinion of a gate motor.
  • Material: It's typically made of steel, often bright steel, for durability and strength. Some variations might also be nylon-covered steel or even full nylon for quieter operation, though steel is common for its robustness.
  • Dimensions: The SLGR41 typically comes in 1-meter (1000mm) or 1018mm lengths. It often has 4 holes for mounting to the gate frame. Common dimensions for such racks are around 12mm thickness and 30mm face width, although these can vary slightly.
  • Application: It's used in both residential and commercial sliding gate automation systems.
  • Features: It usually includes fixing points or lugs for secure attachment to the gate. These sections are designed to interlock or slide into each other to create the required length for the gate.

Sliding gate operator gear rack -SLGR612

$25.35

Ship or pick up from our office.

Sliding gate operator gear rack -SLGR612

*6 Holes *Length: 1018 mm The Sliding Gate Operator Gear Rack -SLGR612 is a specific type of gear rack designed to work with automatic sliding gate operators. ⚙️ It's an essential component that allows the gate motor to move the gate open and closed. Here's a breakdown of what that means: What is a Gear Rack for a Sliding Gate Operator? A gear rack is a linear component with teeth cut along its length. It acts like a long, straight gear. In the context of a sliding gate, the gear rack is attached to the bottom or side of the gate. The gate operator, which contains a motorized gear (or pinion), engages with these teeth. As the motor turns the pinion, it "walks" along the gear rack, causing the gate to slide horizontally. Key Features and Specifications of SLGR612 The sliding gate operator gear rack -SLGR612 described as a "Special Type" of gear rack, with the following known characteristics:
  • Length: 1018 mm (approximately 3.34 feet) 📏
  • Holes: It features 6 holes, likely for mounting to the gate.
  • Weight: 10 kg
  • Dimensions: 200 × 100 × 100 cm (these dimensions seem to refer to the packaging or a larger kit, not just the rack itself, which is a common occurrence in product listings).
  • Material: While not explicitly stated for SLGR612, gear racks are commonly made from galvanized steel for heavy-duty applications or nylon reinforced with a steel core for quieter operation and lighter gates. Heavy gates typically use steel racks.
Importance in Gate Automation Gear racks are crucial for sliding gate automation because they provide:
  • Smooth and Reliable Operation: The precise engagement between the pinion and the rack teeth ensures consistent and smooth movement of the gate.
  • Durability: Made from robust materials, they withstand daily use and varying weather conditions.
  • Enhanced Security: The mechanical linkage makes it difficult to force the gate open manually without the operator's input.
  • Convenience: They enable the automated opening and closing of gates via remote controls, keypads, or other access control systems.
The SLGR612, like other gear racks, is a vital part of a sliding gate operator system, converting the rotary motion of the motor into the linear motion needed to open and close the gate.