Single swing gate opener –VDS EGO110

$829.25

Ship or pick up from our office.

Product Sheet PDF

Single swing gate opener –VDS EGO110

*Suitable gate weight: Maximum 200 Kg Included: *1 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key The VDS EGO110 is a model of single swing gate opener manufactured by VDS Automation. It is an electromechanical operator designed to automate swing gates. Here's a breakdown of its key characteristics and features:
  • Type: Linear screw electromechanical operator. This means it uses an electric motor to rotate a threaded shaft, which in turn pushes or pulls the gate.
  • Gate Compatibility:
    • Suitable for single swing gates.
    • Maximum gate leaf length: Up to 3 meters (some variations might support up to 2.5 meters).
    • Maximum gate weight: Up to 200 kg per leaf.
  • Construction:
    • Sturdy aluminum structure.
    • Stainless steel rod (with a typical stroke of 400mm).
    • Parts lubricated with lithium grease for protection against corrosion, oxidation, and rust.
  • Performance:
    • Quiet operation (typically < 30 dBA noise level).
    • High-performance electric motor.
    • Opening angle: Up to 120°.
    • Opening time: Around 20-25 seconds.
    • Thrust: 2000N.
    • Available in 120VAC and 24VDC versions. The 24VDC versions are often described as "intensive use" with higher frequency of use (90%) compared to 230VAC (50%).
  • Safety Features:
    • Anti-squashing system (compliant with EN 12453 standards).
    • Slowing down function.
    • Thermal cutout at 140° (for motor protection).
    • Obstacle detection (especially in 24V and some 120V versions).
  • Installation & Convenience:
    • Quick installation with multi-position brackets and a cover for brackets in technopolymer.
    • Manual release with a key for operation during power outages.
    • Optional limit switches.
    • Optional battery backup kit (for 24V models).
    • Often comes with a control unit (sometimes with a built-in receiver).
In essence, the single swing gate opener –VDS EGO110 is a robust and reliable electromechanical opener designed for automating residential and some commercial swing gates, focusing on durability, quiet operation, and safety features.

Single swing underground gate opener -VDS RG24

$1,526.85

Ship or pick up from our office.

Product Sheet PDF

Single swing underground gate opener -VDS RG24

*Suitable gate weight: Maximum 500 Kg Included: *1 x Electromechanical motor *1 x Foundation box *1 x Main control board *1 x Waterproof box *2 x Remote control *1 x Set safety sensor *1 x Manual release key
An underground single swing gate opener is a device installed beneath a gate to automate its opening and closing, specifically for gates that swing open and closed on a single axis.
The undergroung single swing gate opener -VDS RG24 is designed to be discreet, with the mechanism hidden underground, making it a preferred choice for those prioritizing aesthetics. 
Key features and benefits of single swing underground gate openers:
  • Concealed Mechanism:
    The primary advantage is that the motor and other components are installed underground, keeping the gate's appearance unchanged. 
  • Aesthetics:
    This makes them ideal for residential settings where maintaining the visual appeal of the gate is important. 
  • Space Efficiency:
    They don't require the extra space that some other gate opener types need for the motor and arm. 
  • Durability:
    Often built with robust materials like die-cast aluminum and stainless steel components, they are designed for longevity and resistance to corrosion. 
  • Safety Features:
    Many models include features like anti-crushing devices and speed slowdown, which are crucial for safety. 
  • Silent Operation:
    Underground openers can be designed for quiet operation, enhancing user experience. 
  • Easy Installation:
    Some models offer simplified installation procedures and low maintenance requirements. 
  • Versatility:
    They can be used with various gate materials, including steel, wood, and vinyl. 
  • Optional Features:
    Many models offer optional features like battery backup, remote control, and safety sensors. 
Considerations when choosing an underground swing gate opener:
  • Gate Size and Weight: Ensure the opener can handle the size and weight of your specific gate. 
  • Gate Material: Verify compatibility with your gate's material (e.g., steel, wood, vinyl). 
  • Slope: If your driveway has a slope, consider how it might affect the opener's performance. 
  • Manual Release: If you need manual operation for emergencies, ensure the opener has a reliable manual release mechanism. 
  • Power Source: Check if the opener is compatible with your power supply (e.g., AC or DC). 

Sliding gate opener – Royalgate RGSL2TO

$664.40

Ship or pick up from our office.

Sliding gate opener –Royalgate RGSL2TO

*Suitable gate weight: Maximum 2000 Kg Included: *1 x Electromechanical motor *1 x Main control board *4 Meters x SLGR41 Gear rack *2 x Remote control *2 x Manual release key

Sliding gate opener – Royalgate RGSLC400

$487.90

Ship or pick up from our office.

Sliding gate opener - Royalgate RGSLC400

Included: 1 x Electromechanical motor 1 x Main control board 6 Meters Chain 2 x Manual release key 2 x Remote control  
A chain-link sliding gate opener is a mechanical device that automates the opening and closing of a chain-link fence gate, allowing it to slide open and closed along a track rather than swinging.
It typically uses a chain drive system to move the gate, providing a convenient and often more secure access solution. 
Here's a more detailed explanation:
What it is:
  • Automation:
    It's an automated system that eliminates the need to manually open and close a sliding chain-link gate.
  • Chain Drive:
    The most common type uses a chain drive, similar to a bicycle chain, to propel the gate along a track. 
  • Track and Wheels:
    The gate slides on a track, usually supported by rollers or wheels, allowing for smooth movement. 
  • Security and Convenience:
    Sliding gate openers provide security by limiting access and offer convenience by allowing remote or automated operation. 
How it works:
  1. Motor and Gearbox: An electric motor and gearbox drive the chain. 
  2. Chain Movement: The motor rotates a sprocket, which moves the chain. 
  3. Gate Movement: The chain is connected to the gate, and its movement along the track pulls or pushes the gate open or closed. 
  4. Control System: A control system, which can include remote controls, keypads, or sensors, manages the gate's operation. 
Types of Sliding Gates (relevant to openers):
  • Cantilever Gates: These gates slide horizontally on rollers, with a portion of the gate extending beyond the opening to act as a counterbalance. 
  • Rolling Gates: These gates roll along a track, often used when space is limited. 
Benefits:
  • Space Efficiency: Sliding gates require less space than swing gates, especially for wider openings. 
  • Security: Automated systems offer enhanced security and controlled access. 
  • Convenience: Remote or automated operation provides ease of use. 
  • Durability: Chain drive systems are known for their durability and reliability. 
Considerations:
  • Gate Weight and Size: The opener needs to be compatible with the gate's weight and size. 
  • Power Source: Consider whether you need an AC or DC motor, or even a solar-powered option. 
  • Control System: Choose a control system that suits your needs (remotes, keypads, etc.). 

Sliding gate opener – VDS Carrera SL800

$950.80

Ship or pick up from our office.

Sliding gate opener - VDS Carrera SL800

Suitable gate weight: Maximum 800 Kg Included:
  • 1 x Electromechanical motor
  • 1 x Main control board
  • 4 Meters x SLGR41 Gear rack
  • 2 x Remote control
  • 2 x Manual release key
  • 1 x Base Plate
  • 2 x Limit Switch bracket
  • Installation Manual
  • Programming Manual
Key Features of the VDS Carrera Gate Openers:
  • Sliding Gate Compatibility:
    The Carrera series is designed for sliding gates, utilizing a gear rack-driven mechanism. 
  • Weight Capacity:
    Models are available for gates weighing up to 800 kg (Carrera 800) and 1000 kg (Carrera 1000).
     
  • Robust Construction:
    The motors feature steel and cast iron gears, lubricated with lithium grease for corrosion resistance and quiet operation, according to VDS Automation. 
  • Control and Safety:
    They include a control unit with an air-stop seal, anti-squashing system, and options for electronic torque control and slowing down. 
  • Easy Programming:
    The pre-wired systems are designed for easy programming and installation. 
  • Optional Accessories:
    Keypads, remote control radio receivers, and safety sensors can be integrated. 
  • Made in Italy:
    VDS Automazioni is an Italian company that emphasizes the quality and safety of its products. 
  • Manual Release:
    A manual release lever with a custom key is included for emergency situations. 

Sliding gate opener – Zero ZSL600

$915.75

Ship or pick up from our office.

Sliding gate opener - Zero ZSL600

*Suitable gate weight: Maximum 600 Kg Included: *1 x Electromechanical motor *1 x Main control board *4 Meters x SLGR41 Gear rack *2 x Remote control *2 x Manual release key
The Zero ZSL600 is a sliding gate opener primarily designed for residential or light commercial use.
It's likely a specific model or series offered by Royal Electronics Technology Center Co. This type of opener is used to automate the sliding motion of gates, typically for driveways, and can be controlled remotely. 
Here's a more detailed breakdown:
Key Features & Functions:
  • Sliding Gate Automation:
    The ZSL600 is specifically designed to automate the sliding motion of a gate along a track. 
  • Remote Control:
    It likely uses a remote control (possibly WiFi-enabled) to open and close the gate, allowing for convenient operation from a distance. 
  • Safety Features:
    Many sliding gate openers include safety mechanisms like infrared sensors and obstacle detection to prevent accidents. 
  • Adjustable Settings:
    The ZSL600 might offer adjustable features like soft start/stop, motor torque, and automatic closing times. 
  • Universal Compatibility:
    The control board may be compatible with various household appliances or industrial devices beyond just gate openers. 
  • Surveillance Integration:
    Some models, like the ZSL600, might be designed to integrate with surveillance cameras for added security.  
Typical Applications:
  • Residential Driveways:
    Automating the opening and closing of driveway gates for convenience and security. 
  • Light Commercial Settings:
    Suitable for properties with moderate traffic and where automated gate operation is desired. 
  • Various Household Appliances:
    Potential for controlling other devices like lights, water pumps, or automatic feeders. 
Important Considerations:
  • Installation:
    Sliding gate openers typically require professional installation to ensure proper alignment, safety, and functionality. 
  • Maintenance:
    Regular maintenance, such as lubrication and checking safety sensors, is important for optimal performance and longevity. 
  • Power Source:
    The ZSL600 is likely designed to operate on a standard power supply (110V AC ). 
  • Manual Override:
    Most gate openers, including the ZSL600, include a manual release mechanism for use in case of power outages or system failures.

Sliding gate opener -Difermatic DSL600

$868.90

Ship or pick up from our office.

Sliding gate opener -Difermatic DSL600

*Suitable gate weight: Maximum 600 Kg Included: *1 x Electromechanical motor *1 x Main control board *4 Meters x SLGR41 Gear rack *2 x Remote control *2 x Manual release key

Sliding gate opener -Difermatic DSL800

$1,015.60

Ship or pick up from our office.

Sliding gate opener -Difermatic DSL800

*Suitable gate weight: Maximum 800 Kg Included: *1 x Electromechanical motor *1 x Main control board *4 Meters x SLGR41 Gear rack *2 x Remote control *2 x Manual release key

Sliding gate opener -HiGate HGSL1T

$618.45

Ship or pick up from our office.

Sliding gate opener –HiGate HGSL1T

*Suitable gate weight: Maximum 1000 Kg Included: *1 x Electromechanical motor *1 x Main control board *4 Meters x SLGR41 Gear rack *2 x Remote control *2 x Manual release key

Sliding gate opener -Key Automation SUN7224

$952.55

Ship or pick up from our office.

Product Sheet PDF

Sliding gate opener -Key Automation SUN7224

Electromechanical gear motor for sliding gates up to 700 kg:
  • With a slowdown function both in opening and closing to preserve gate integrity
  • Electronic and mechanical parts are well protected from external agents
  • Easy maintenance thanks to the horizontal control unit position
  • High technological materials resistant to weather conditions
  • Gear reduction with an extra-large bearing with high performance
  • Extremely silent mechanics, protected by a robust die-cast and powder-coated aluminum body
  • With 24 Vdc control unit CT10224
  • The release system is ergonomic, efficient, and easily accessible
  • Opens gates weighing up to 700 kg
  • Easy to install and programming
  • Get the desired torque and tension by adjusting the parameters
  • Easy to add new remotes
  • Emergency release key in case of power failure
  • Stop/Reverse in case of obstruction during gate closing
  • Built-in adjustable auto-close
  • Reliable spring limit sensor for easy adjustment
  • Optional accessories such as keypads, remote control radio receivers, and safety sensors can also be integrated
Key Automation SUN7224 is High-quality Italian made sliding gate opener with state-of-the-art technology and design. Open gates weighing up to 700 KG effortlessly with this gear rack-driven sliding gate opener. SUN7224 is designed with a 24V DC motor which provides exceptional torque and its continuous operation makes it ideal for most applications. 13 ft nylon gear rack track is included in the SUN7224 sliding gate opener kit and if your gates are more than 13 ft in length then you can opt for an extra rack.

Sliding gate opener -Key Automation TURBO82120

$981.70

Ship or pick up from our office.

Product Sheet PDF

Sliding gate opener -Key Automation TURBO82120

Included in the Package:
  • 1 x Electromechanical motor
  • 1 x Main control board
  • 4 Meters x SLGR41 Gear rack
  • 2 x Remote control
  • 2 x Manual release key

TECHNICAL FEATURES

Speed cm/s 16
Torque Nm 23
Duty cycle percentage % 30
Control unit CT102B
Voltage Vac 120
AC Voltage Frequency Hz 50/60
Nominal current A 1,9
Nominal power W 450
Appliance isolation class I
Degree of protection IP 44
Dimensions (L - D - H) mm 320 - 184 - 260
Item kg 13
Minimum operating temperature °C -20
Max operating temperature °C +55
Max leaf weight kg 800
 

Sliding gate opener -Royalgate RGSL0.5TN24

$592.10

Ship or pick up from our office.

Sliding gate opener -Royalgate RGSL0.5TN24

*Suitable gate weight: Maximum 500 Kg Included: *1 x DC 24 Volts Electromechanical motor *1 x Main control board *4 Meters x SLGR41 Gear rack *2 x Remote control *2 x Manual release key The Royalgate RGSL0.5TN24 is a sliding gate opener designed for automated operation of sliding gates. Here's a breakdown of its key features and specifications based on the information available:
  • Type: Sliding Gate Opener. This means it's for gates that move horizontally along a track, not swinging gates.
  • Capacity: It's designed to handle gates with a maximum weight of 500 kg (approximately 1100 lbs).
  • Motor: It's powered by a 24V DC electromechanical motor. DC motors are known for energy efficiency and are often suitable for battery backup and solar power options.
  • Key Features:
    • Automated Operation: Provides convenient opening and closing of your sliding gate.
    • Emergency Release: Includes manual release keys for operation during power failures.
    • Safety Mechanisms: Often includes features like soft start/stop (to reduce wear and tear) and auto-reverse (the gate reverses if it detects an obstruction).
    • Adjustable Auto-Close: The system likely has a built-in timer for automatic closing of the gate (e.g., 0, 30, 60, 90 seconds).
    • Reliable Limit Sensors: Uses spring limit sensors for easy adjustment of the gate's open and close positions.
    • Expandability: Can be integrated with optional accessories such as keypads, additional remote controls, radio receivers, and safety sensors (like photocells).
  • Applications: Commonly used for both residential and light commercial applications, such as driveways, parking areas, and small commercial properties.
  • Construction: The control unit often features an air-stop seal against moisture and insects, and mechanical parts are typically lubricated with lithium grease for protection against corrosion.
It's important to note that while the core specifications are consistent, some listings might mention slightly different maximum gate weights (e.g., 700kg or 800kg for other models or variations from the same brand). Always confirm the specific model number (RGSL0.5TN24) to ensure you have the correct specifications.