Gate Automations
Sliding gate opener – Royalgate RGSL0.8T
Ship or pick up from our office.
Open gates weighing up to 1760 lbs effortlessly with this gear rack-driven sliding gate opener. It is designed with a 110V AC motor which provides exceptional torque and its continuous operation makes it ideal for most applications. 13 ft nylon gear rack track is included in the kit and if your gates are more than 13 ft in length then you can opt for an extra rack.- Opens gates weighing up to 1760 lb
- Easy to install
- Get the desired torque and tension by adjusting the potentiometer
- Easy to add new remotes
- Emergency release key in case of power failure
- Stop/Reverse in case of obstruction during gate closing
- Built-in adjustable auto-close (0, 30, 60, 90 seconds)
- Reliable electromagnetism limit sensor for easy adjustment
- Optional accessories such as keypads, remote control radio receivers, and safety sensors can also be integrated
Sliding gate opener -VDS Simply SL110
Ship or pick up from our office.
Product Sheet PDF
Italian-made with the highest quality materials and state-of-the-art technology.
Opening gates weighing up to 1300 lbs effortlessly with this gear rack-driven sliding gate opener.
It is designed with a 110V AC motor which provides exceptional torque and its continuous operation makes it ideal for most applications.
- Opens gates weighing up to 1300 lb (600 KG)
- Pre-wired and Easy programming - Watch the installation tutorial on our YouTube channel
- Solid cast iron and steel gears
- Control unit box with an air-stop seal against moisture and insects
- Lithium grease lubricated mechanical parts against corrosion, oxidation, and rust
- Very quiet operation
- High-performance electric motor
- Reliable spring limit sensor for easy adjustment
- Optional accessories such as keypads, remote control radio receivers, and safety sensors can also be integrated.
Sliding gate opener –Royalgate RGSL0.3T
Ship or pick up from our office.
Open gates weighing up to 660 lbs effortlessly with this gear rack-driven sliding gate opener. It is designed with a 110V AC motor which provides exceptional torque and its continuous operation makes it ideal for most applications. 13 ft nylon gear rack track is included in the kit and if your gates are more than 13 ft in length then you can opt for an extra rack.- Opens gates weighing up to 660 lb
- Easy to install
- Get the desired torque and tension by adjusting the potentiometer
- Easy to add new remotes
- Emergency release key in case of power failure
- Stop/Reverse in case of obstruction during gate closing
- Built-in adjustable auto-close (0, 30, 60, 90 seconds)
- Reliable electromagnetism limit sensor for easy adjustment
- Optional accessories such as keypads, remote control radio receivers, and safety sensors can also be integrated
Single swing gate opener -VDS RG24
Ship or pick up from our office.
Product Sheet PDFA single swing underground gate opener is a device installed beneath a gate to automate its opening and closing, specifically for gates that swing open and closed on a single axis.
The Single swing gate opener -VDS RG24 is designed to be discreet, with the mechanism hidden underground, making it a preferred choice for those prioritizing aesthetics.
Key features and benefits of single swing underground gate openers:
-
Concealed Mechanism:The primary advantage is that the motor and other components are installed underground, keeping the gate's appearance unchanged.
-
Aesthetics:This makes them ideal for residential settings where maintaining the visual appeal of the gate is important.
-
Space Efficiency:They don't require the extra space that some other gate opener types need for the motor and arm.
-
Durability:Often built with robust materials like die-cast aluminum and stainless steel components, they are designed for longevity and resistance to corrosion.
-
Safety Features:Many models include features like anti-crushing devices and speed slowdown, which are crucial for safety.
-
Silent Operation:Underground openers can be designed for quiet operation, enhancing user experience.
-
Easy Installation:Some models offer simplified installation procedures and low maintenance requirements.
-
Versatility:They can be used with various gate materials, including steel, wood, and vinyl.
-
Optional Features:Many models offer optional features like battery backup, remote control, and safety sensors.
Considerations when choosing an underground swing gate opener:
- Gate Size and Weight: Ensure the opener can handle the size and weight of your specific gate.
- Gate Material: Verify compatibility with your gate's material (e.g., steel, wood, vinyl).
- Slope: If your driveway has a slope, consider how it might affect the opener's performance.
- Manual Release: If you need manual operation for emergencies, ensure the opener has a reliable manual release mechanism.
- Power Source: Check if the opener is compatible with your power supply (e.g., AC or DC).
Single swing gate opener -VDS Underground RG110
Ship or pick up from our office.
Product Sheet PDFSwing gate opener -VDS Underground RG110
The Swing gate opener -VDS Underground RG110 is one of the best underground swing gate operators that can be installed for the swing driveway gates.The Swing gate opener -VDS Underground RG110 is Italian-made and can be installed for heavy swing gates.
*Electromechanical Motor *Maximum gate weight: 500 Kg *120 V More information about the swing gate openers: WHAT ARE THE DIFFERENT TYPES OF SWING GATE MOTORS? 1- Articulated Arm for Swing Gate Operators How do automatic gates work with articulated swing gate motors? An articulated arm electric gate opener uses a two-part arm with an ‘elbow’ joint to connect the motor to the gate. This arm protrudes from the gate motor body, so there has to be room for the arm to move as the driveway gate opens and closes. This type of electric gate opener is easier to install than other types, thanks to the geometry of the arm system. They can be slightly more expensive than other gate motors, but they open and close automated gates quickly. Many homeowners like discrete gate automation systems, and articulated arm motors can be more obvious when installed. However, many have the control system built into one of the motors. These motors for automatic gates are mounted on the inside of gates so they’re not seen from the outside of closed gates. In the event of power failure or mechanical breakdown, articulated arm motors can normally be released manually from outside the gate with an optional cable release system. All articulated arm gate operators are electric gate motors that can be either 120VAC or 24VDC. All 24V and some 120V versions have obstacle detection. This means that the gates stop moving and some even reverse when they come into contact with an object during operation. Articulated arm gate automation systems can be the best choice where each electric gate opener is mounted on a large gate pier or pillar. 2- Ram And Linear Screw Automatic Swing Gate Openers Ram gate automation motors push and pull a piston mounted on the gate. Linear screw electric motors for gates use an electric motor to rotate the gate mounting along a threaded shaft. Both types of electric gate motors are slim and don’t need a lot of space to operate. However, this advantage does mean that they require careful alignment during installation. Manual release systems are only available from inside the driveway gate. A ram or linear screw type of motor for automatic gate control is attached to the gate at one end and the gate pillar or post at the other end. Ram motors can be hydraulic or driven by electric motors, but all require a separate control box. As with articulated arm motors, 120Vac, and 24Vdc, you can buy versions with obstacle detection for safer operation. Additionally, heavy-duty versions of each type of electric gate opener are available that will operate larger gates with leaves up to 7m long. These electric gate openers can be the best gate automation solution when price is important. Their simpler design and operation can make them a cost-effective solution compared to other types of electric gate motors. 3- Underground Swing Gate Operators Many Canadian homeowners choose underground gate automation motors because they are very discreet. This is because each underground gate opener is hidden under the hinge end of each swing gate. But how do automatic gates work when they’re opened and closed by hidden underground motors? During installation, a carefully positioned hole must be dug to house a foundation box for each underground gate opener. The housing for each underground electric gate motor needs sufficient drainage to prevent the motors from sitting in water, or they will fail. Underground electric gate motors don’t need a lot of space to operate and can be installed on the inside or back of gate pillars. They are usually only installed behind gate pillars when the gates must open more than 90 degrees, so that the post or pillar does not obstruct the gates. With the addition of a 180-degree gate opener, your gates can open much wider than 90 degrees. This is an optional chain drive system for driveways that bend around behind the gate pillars. If the gate only opened to 90 degrees, it could block part of the driveway. But a 180-degree gate opener system means that it can keep going past 90 degrees, so it doesn’t block the driveway. Normally, underground automation of gates is the most expensive solution, but they are almost invisible. It is possible for the most powerful underground gate opener to open and close a swing gate up to 5m long. Underground motors for automatic gates can be manually released from outside the gate. These types of gate motors can be either hydraulic or electromechanical. A separate control box is required, and 120VAC and 24VDC versions with obstacle detection are available. Underground gate opener installation is not simple, and it should always be installed by professional electric gate engineers. Underground gate automation could be the best style for you if you want a discreet, almost invisible electric gate motor installation and you have the budget for this more expensive option.
Single swing gate opener –V2 Calypso
Ship or pick up from our office.
Product Sheet PDFSingle swing gate opener –V2 Calypso
More information about the swing gate openers: WHAT ARE THE DIFFERENT TYPES OF SWING GATE MOTORS? 1- Articulated Arm for Swing Gate Operators How do automatic gates work with articulated swing gate motors? An articulated arm electric gate opener uses a two-part arm with an ‘elbow’ joint to connect the motor to the gate. This arm protrudes from the gate motor body, so there has to be room for the arm to move as the driveway gate opens and closes. This type of electric gate opener is easier to install than other types, thanks to the geometry of the arm system. They can be slightly more expensive than other gate motors, but they open and close automated gates quickly. Many homeowners like discrete gate automation systems, and articulated arm motors can be more obvious when installed. However, many have the control system built into one of the motors. These motors for automatic gates are mounted on the inside of gates so they’re not seen from the outside of closed gates. In the event of power failure or mechanical breakdown, articulated arm motors can normally be released manually from outside the gate with an optional cable release system. All articulated arm gate operators are electric gate motors that can be either 120VAC or 24VDC. All 24V and some 120V versions have obstacle detection. This means that the gates stop moving and some even reverse when they come into contact with an object during operation. Articulated arm gate automation systems can be the best choice where each electric gate opener is mounted on a large gate pier or pillar. 2- Ram And Linear Screw Automatic Swing Gate Openers Ram gate automation motors push and pull a piston mounted on the gate. Linear screw electric motors for gates use an electric motor to rotate the gate mounting along a threaded shaft. Both types of electric gate motors are slim and don’t need a lot of space to operate. However, this advantage does mean that they require careful alignment during installation. Manual release systems are only available from inside the driveway gate. A ram or linear screw type of motor for automatic gate control is attached to the gate at one end and the gate pillar or post at the other end. Ram motors can be hydraulic or driven by electric motors, but all require a separate control box. As with articulated arm motors, 120Vac, and 24Vdc, you can buy versions with obstacle detection for safer operation. Additionally, heavy-duty versions of each type of electric gate opener are available that will operate larger gates with leaves up to 7m long. These electric gate openers can be the best gate automation solution when price is important. Their simpler design and operation can make them a cost-effective solution compared to other types of electric gate motors. 3- Underground Swing Gate Operators Many Canadian homeowners choose underground gate automation motors because they are very discreet. This is because each underground gate opener is hidden under the hinge end of each swing gate. But how do automatic gates work when they’re opened and closed by hidden underground motors? During installation, a carefully positioned hole must be dug to house a foundation box for each underground gate opener. The housing for each underground electric gate motor needs sufficient drainage to prevent the motors from sitting in water, or they will fail. Underground electric gate motors don’t need a lot of space to operate and can be installed on the inside or back of gate pillars. They are usually only installed behind gate pillars when the gates must open more than 90 degrees, so that the post or pillar does not obstruct the gates. With the addition of a 180-degree gate opener, your gates can open much wider than 90 degrees. This is an optional chain drive system for driveways that bend around behind the gate pillars. If the gate only opened to 90 degrees, it could block part of the driveway. But a 180-degree gate opener system means that it can keep going past 90 degrees, so it doesn’t block the driveway. Normally, underground automation of gates is the most expensive solution, but they are almost invisible. It is possible for the most powerful underground gate opener to open and close a swing gate up to 5m long. Underground motors for automatic gates can be manually released from outside the gate. These types of gate motors can be either hydraulic or electromechanical. A separate control box is required, and 120VAC and 24VDC versions with obstacle detection are available. Underground gate opener installation is not simple, and it should always be installed by professional electric gate engineers. Underground gate automation could be the best style for you if you want a discreet, almost invisible electric gate motor installation and you have the budget for this more expensive option.
Single swing gate opener -Key Automation STAR3024
Ship or pick up from our office.
Product Sheet PDFSingle swing gate opener -Key Automation STAR3024
More information about the swing gate openers: WHAT ARE THE DIFFERENT TYPES OF SWING GATE MOTORS? 1- Articulated Arm for Swing Gate Operators How do automatic gates work with articulated swing gate motors? An articulated arm electric gate opener uses a two-part arm with an ‘elbow’ joint to connect the motor to the gate. This arm protrudes from the gate motor body, so there has to be room for the arm to move as the driveway gate opens and closes. This type of electric gate opener is easier to install than other types, thanks to the geometry of the arm system. They can be slightly more expensive than other gate motors, but they open and close automated gates quickly. Many homeowners like discrete gate automation systems, and articulated arm motors can be more obvious when installed. However, many have the control system built into one of the motors. These motors for automatic gates are mounted on the inside of gates so they’re not seen from the outside of closed gates. In the event of power failure or mechanical breakdown, articulated arm motors can normally be released manually from outside the gate with an optional cable release system. All articulated arm gate operators are electric gate motors that can be either 120VAC or 24VDC. All 24V and some 120V versions have obstacle detection. This means that the gates stop moving and some even reverse when they come into contact with an object during operation. Articulated arm gate automation systems can be the best choice where each electric gate opener is mounted on a large gate pier or pillar. 2- Ram And Linear Screw Automatic Swing Gate Openers Ram gate automation motors push and pull a piston mounted on the gate. Linear screw electric motors for gates use an electric motor to rotate the gate mounting along a threaded shaft. Both types of electric gate motors are slim and don’t need a lot of space to operate. However, this advantage does mean that they require careful alignment during installation. Manual release systems are only available from inside the driveway gate. A ram or linear screw type of motor for automatic gate control is attached to the gate at one end and the gate pillar or post at the other end. Ram motors can be hydraulic or driven by electric motors, but all require a separate control box. As with articulated arm motors, 120Vac, and 24Vdc, you can buy versions with obstacle detection for safer operation. Additionally, heavy-duty versions of each type of electric gate opener are available that will operate larger gates with leaves up to 7m long. These electric gate openers can be the best gate automation solution when price is important. Their simpler design and operation can make them a cost-effective solution compared to other types of electric gate motors. 3- Underground Swing Gate Operators Many Canadian homeowners choose underground gate automation motors because they are very discreet. This is because each underground gate opener is hidden under the hinge end of each swing gate. But how do automatic gates work when they’re opened and closed by hidden underground motors? During installation, a carefully positioned hole must be dug to house a foundation box for each underground gate opener. The housing for each underground electric gate motor needs sufficient drainage to prevent the motors from sitting in water, or they will fail. Underground electric gate motors don’t need a lot of space to operate and can be installed on the inside or back of gate pillars. They are usually only installed behind gate pillars when the gates must open more than 90 degrees, so that the post or pillar does not obstruct the gates. With the addition of a 180-degree gate opener, your gates can open much wider than 90 degrees. This is an optional chain drive system for driveways that bend around behind the gate pillars. If the gate only opened to 90 degrees, it could block part of the driveway. But a 180-degree gate opener system means that it can keep going past 90 degrees, so it doesn’t block the driveway. Normally, underground automation of gates is the most expensive solution, but they are almost invisible. It is possible for the most powerful underground gate opener to open and close a swing gate up to 5m long. Underground motors for automatic gates can be manually released from outside the gate. These types of gate motors can be either hydraulic or electromechanical. A separate control box is required, and 120VAC and 24VDC versions with obstacle detection are available. Underground gate opener installation is not simple, and it should always be installed by professional electric gate engineers. Underground gate automation could be the best style for you if you want a discreet, almost invisible electric gate motor installation and you have the budget for this more expensive option.
Single swing gate opener – NICE Wingo 4024
Ship or pick up from our office.
Product Sheet PDF NICE Wingo 4024 swing gate opener is a drive that is suitable for small single swing gates in the private sector. This drive is perfect for swing gates with the maximum wing width of 1.8 m (weight - 200 kg) or with the maximum weight of 400 kg (with the wing width 1 m). Nice Swing Gate Operators are designed to fit a wide range of settings and applications.
