Safety sensor P51022H
Click to enlarge
Underground Swing Gate Opener -VDS RG110
Underground Dual Swing Gate Opener -VDS RG110 $2,103.60
Back to products
Swing gate opener -VDS Articulated
Single swing gate opener -VDS Articulated $1,012.30

Safety sensor P51022H

$78.80

Ship or pick up from our office.

Safety sensor P51022H

*NO/NC

*AC/DC 12-24 V

*Receiving Range: 12 Meters

*IP 54

*External LED flash lamp signal (AC/DC 12V-24 V)

*Internal Rotation system: 0~180

 

The P51022H is a safety sensor, specifically a photoelectric sensor, commonly used in automated gate and garage door opener systems.

Functionality

Like most photoelectric safety sensors, the P51022H works by:

  • Transmitting an infrared light beam: One part of the sensor (the emitter) sends out an invisible light beam.
  • Receiving the beam: The other part of the sensor (the receiver) is designed to detect this beam.
  • Obstruction detection: If something breaks the infrared beam while the gate or door is closing, the receiver instantly signals the opener to stop or reverse its movement. This prevents the door or gate from closing on people, pets, or objects, thus enhancing safety and preventing damage.

Applications

The P51022H is primarily used in:

  • Automated gate openers: For both single swing and sliding gates, ensuring they don’t close on anything in their path.
  • Garage door openers: A mandatory safety feature in most modern residential garage doors, preventing accidents.

 

Key Characteristics

Based on available information for similar safety sensors:

  • Type: Photoelectric sensor (often referred to as “photo eyes” or “safety beams”).
  • Components: Typically comes as a kit including a sending sensor (emitter) and a receiving sensor.
  • Installation Height: These sensors are usually installed a few inches (e.g., 6 inches) above the ground to effectively detect obstacles, including small children or pets.
  • Voltage: Similar sensors often operate on 12-24V AC/DC.

It’s worth noting that this specific model, P51022H, is listed as an accessory for gate opener systems, and there might be an alternative model, P51033H, which is also a photoelectric safety sensor with an integrated flashlight.

Compare
Add to wishlist
Category: Tags: , , , , , , ,
Description

Safety sensor P51022H

Electric automatic gate control, photocell, and flasher integrated safety sensor

I. Technical Specification of the Safety Sensor – P51022H

1. Working voltage: 12~24VAC/DC
2. Working current(24VDC):emitter: ≤15mA    receiver: ≤30mA
3. Photocell wavelength: 940nm
4. Angle of opposite emission: ≤±5°
5. Receiver range: ≥12m
6. Working temperature: -20℃～+60℃
7. Relay contact loading capacity: 1A/30VDC
8. Waterproof grade: IP54
9. Can connect external flash lamp signal (12V-24VAC/DC), LED can flash.
10. Size: 127*50*35mm

II. Safety Instruction for the Safety Sensor – P51022H

1. For security, please read the user manual carefully before initial operation.
2. This photocell is without any fuse, so please make sure the power is off before installation.
3. Only use this system that does not cause any danger to life or property during the running failure or its security risks are eliminated;
4. Please guarantee the products used in effective working range.

III. Installation instruction for the Safety sensor – P51022H

1. The product should be installed more than 20cm upper the ground(to avoid reflection), and the distance between emitter and receiver shall be more than 0.5 meters(if not , maybe the photocell will working on or cannot work);
2. the end user  should installed the photocell on the back of the direct sunshine or other strong shining(±5º) to keep the photocell work well steadily
3. Pls try to avoid installing other photocell emitters within effective receive range;
4. If install many photo cells on the same line, can install receivers on two ends and then emitters in the middle back to back which can effectively avoid the  problem as above.
5. in order to avoid signal bias of emitters and receivers which will easily cause mis-operation, pls Installate the photocell firmly
6. Connecting power after checking no error of connecting lines:
6.1 Photocell
After the emitter and receiver module of photocell input 12V-24VAC/DC, emitter LED on,receiver LED on, receiver NO/COM on while NC/COM off;
Making the CAP of emitter and receiver align, receiver LED off, NC/COM on while NO/COM off. If the signal between emitter and receiver is interrupted, receiver LED on, NC/COM off while NO/COM on.
6.2 Flash lamp
6.2.1 When there is signal income from FLASH port(12V-24V AC/DC)
It keeps lighting when JP1 CAP connects the two pins under
It blinks  when JP1 CAP connects the two pins upper
6.2.2 When there is no signal income from FLASH port(12V-24V AC/DC)
It doesn’t work when JP1 CAP connects any two pins

Additional information
Weight 0.2 kg
Dimensions 15 × 12 × 5 cm
Model

P51022H
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Safety sensor P51022H”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping & Delivery

We will process your online order and ship it to you immediately via Canada Post.

You may also like…

Safety sensor - P51033H
Compare

Safety sensor – P51033H

$75.75

Ship or pick up from our office.

Safety sensor - P51033H

*NO/NC *AC/DC 12-24 V *Receiving Range: 12 Meters *IP 54 *External LED flash lamp signal (AC/DC 12V-24 V) *The P51033H safety sensor included the LED flash light   The P51033H is a safety sensor, specifically a photoelectric sensor (also known as a photo eye) commonly used in automatic gate and door systems. What it Does 🚧 This sensor functions as an obstruction detection device. It consists of two parts: an emitter and a receiver. The emitter sends out an infrared light beam, and the receiver detects it. If an object (like a person, pet, or vehicle) interrupts this beam, the sensor sends a signal to the gate or door's control board, causing it to stop or reverse its movement, preventing potential injury or damage.   Key Specifications ⚙️ Here are some of the technical details for the P51033H:
  • Working Voltage: 12~24VAC/DC
  • Working Current (24VDC):
    • Emitter:
    • Receiver:
  • Photocell Wavelength: (infrared)
  • Angle of Opposite Emission:
  • Receiver Range: (this range can be reduced by about in adverse weather conditions like fog, rain, or dust)
  • Working Temperature:
  • Relay Contact Loading Capacity:
  • Waterproof Grade: IP54
  • Size:
  • Outputs: NO/NC (Normally Open/Normally Closed) contacts
  Installation Considerations 🛠️ For optimal performance, the P51033H should be installed:
  • Height: More than above the ground to prevent false reflections.
  • Distance between Emitter and Receiver: More than meters to ensure proper operation.
  • Sunlight: The receiver should be installed away from direct sunlight or other strong light sources () to maintain stable operation.
  • Multiple Sensors: If multiple photocells are installed on the same line, receivers can be placed at both ends and emitters in the middle, back-to-back, to prevent interference.
  • Firm Installation: Install the photocell firmly to avoid signal bias between the emitter and receiver, which could lead to malfunctions.
  Safety Importance 🛡️ Safety sensors like the P51033H are crucial for automated systems like gates and doors. They provide a vital layer of protection, ensuring that the system stops or reverses if an obstacle is detected, thereby preventing accidents, injuries, and property damage.
Add to wishlist
Add to cart
Quick view
Safety sensor VDS-TEC2
Compare

Safety sensor VDS-TEC2

$88.30

Ship or pick up from our office.

Safety sensor VDS-TEC2

Technical Details:
  • NO/NC
  • AC/DC 12-24 V
  • Receiving Range: 15 Meters
  • IP 44
Universal light with barriers for any door design automation. The range can be reduced to 30% in bad weather conditions: fog, rain, dust, etc. Compatible with all models of gate openers, such as single swing, double swing, and sliding gates. When someone passes the infrared region, the detector will send an alarm signal to the control board(which is not included).
  • Compact
  • Lightweight
  • Portable
  • Easy to use
Safety sensor VDS-TEC2 works with our SIMPLY sliding gate operator or EGO swing gate opener, and all different sliding gate openers and swing gate operator brands. The VDS-TEC2 is a type of photoelectric safety sensor primarily used in automated gate and door systems, including swing and sliding gates.
Here's a breakdown of its key characteristics:
  • Function: It works by emitting an infrared light beam between two units: a sender and a receiver. If an object (like a person or vehicle) breaks this invisible beam, the sensor detects the interruption.
  • Safety Feature: When the beam is broken, the VDS-TEC2 sends a signal to the gate's control board. This triggers an action, most commonly preventing the gate from closing to avoid accidents or activating an alarm.
  • Applications: Its main application is in enhancing the safety of automated gates and doors in various settings, ensuring that they don't close on obstructions. It is compatible with different models of gate openers.
  • Technical Specifications:
    • Contacts: NO/NC (Normally Open/Normally Closed)
    • Power Supply: AC/DC 12-24 V
    • Receiving Range: Up to 15 meters (this range can be reduced in adverse weather conditions like fog, rain, or dust).
    • IP Rating: IP44 (meaning it's protected against solid objects larger than 1mm and against splashing water from any direction).
  • Design: It's described as compact, lightweight, portable, and easy to use.
In essence, the VDS-TEC2 acts as a crucial safety mechanism to prevent accidents and damage in automated gate and door operations.
Add to wishlist
Add to cart
Quick view
Sold out
Safety sensor - Nice Era-EPM
Compare

Safety sensor – Nice Era-EPM

$132.35

Ship or pick up from our office.

Safety sensor - Nice Era-EPM

The Nice Era-EPM is a photoelectric safety sensor commonly used in automation systems for gates, garage doors, barriers, and similar installations. It's also often referred to as a photocell or beam sensor. Here's a breakdown of what it is and its key features: Purpose: Its primary function is to enhance safety by detecting obstacles in the path of a moving gate or door. It consists of a transmitter (TX) and a receiver (RX) that are installed facing each other. The transmitter emits an infrared beam, and if this beam is interrupted by an object, the receiver signals the control unit to stop or reverse the automation system, preventing accidents, injuries, or damage to vehicles. Key Features and Specifications:
  • Photoelectric Technology: It uses an infrared beam to detect obstructions.
  • Transmitter (TX) and Receiver (RX): Comes as a pair, with one unit transmitting the beam and the other receiving it.
  • Relay Output: It's a relay photocell, meaning it sends a signal to the control unit via a relay output.
  • Range: Typically has a useful range of 15 meters, which can be extended up to 30 meters in some configurations (e.g., by cutting a "+10m" electrical bridge). However, range can be reduced in adverse weather conditions like fog, rain, or dust.
  • Anti-Glare Circuitry: Designed with an anti-glare circuit to minimize interference from sunlight, ensuring reliable performance in various lighting conditions.
  • Durable Construction: Features an ABS body that is resistant to weather conditions, making it suitable for outdoor use (IP44 protection rating).
  • Easy Installation: Known for its simplified assembly and installation procedure. Some versions (like those with Nice BlueBUS technology) require only two wires for connection to compatible control units, simplifying wiring.
  • Wide Angle of Reception: Generally has a 10° (or 8° with a reduction cone) angle of reception, which helps in compensating for minor alignment issues.
  • Compatibility: While it's a Nice-branded product, it's often described as a "universal photocell" compatible with most gate and garage door automation systems, especially those that accept standard relay inputs. Some models also feature Nice BlueBUS technology for seamless integration with Nice control units that support it.
  • Safety Compliance: It is a Type D presence detector according to EN 12453 standard, which means it detects obstacles on the optical axis. When connected to a control unit with a "phototest" function, it can achieve Category 2 safety against malfunctions according to EN 954-1.
Installation: The Nice Era-EPM sensors are typically surface-mounted on two solid, parallel walls, facing each other to create the safety beam. Proper alignment between the transmitter and receiver is crucial for optimal operation. In essence, the Nice Era-EPM is a robust and reliable safety device designed to make automated gate and door systems safer by actively detecting obstacles in their path of operation.
Add to wishlist
Read more
Quick view
Safety sensor FT2008
Compare

Safety sensor FT2008

$94.30

Ship or pick up from our office.

Safety sensor FT2008

*NO/NC *AC/DC 12-24 V *Receiving Range: 15 Meters *IP 44
A gate opener safety sensor is a device designed to detect objects or people in the path of an automatic gate and prevent it from closing or hitting them, ensuring safety and preventing damage or injury.
These sensors can be photoelectric, pressure sensors, magnetic sensors, or loop detectors and are crucial for preventing accidents and ensuring smooth gate operation. 

Types of Gate Opener Safety Sensors:

  • Photoelectric Sensors:
    These sensors use an infrared beam to detect objects. When the beam is broken by an object, the gate opener is signaled to stop or reverse. 
  • Pressure Sensors:
    These sensors are typically located along the edge of the gate and detect pressure when the gate comes into contact with an object. 
  • Magnetic Sensors:
    These sensors use a magnetic field to detect the presence of vehicles or objects near the gate. 
  • Loop Detectors:
    These sensors use a wire loop buried in the ground near the gate. When a vehicle or object passes over the loop, it triggers the gate to stop or reverse. 
How They Work:
  1. Detection: The sensor detects the presence of an object or person in the gate's path. 
  2. Signal: The sensor sends a signal to the gate operator. 
  3. Action: The gate operator responds by stopping, reversing, or remaining open, depending on the sensor type and programmed settings. 
Importance of Safety Sensors:
  • Prevent Accidents: They protect people and vehicles from being hit by the gate. 
  • Prevent Damage: They help avoid damage to the gate, vehicles, or property. 
  • Ensure Reliable Operation: They contribute to the smooth and safe operation of the gate. 
Add to wishlist
Add to cart
Quick view

Related products

Exit Button SQTPB801
Compare

Exit Button SQTPB801

$22.85

Ship or pick up from our office.

Exit Button SQTPB801

*Touch *Backlight *DC 12V *COM-NC-NO
An exit button, also known as a push-to-exit button, is a device used in access control systems to allow individuals to exit a secured area without needing to use their access credentials.
It's a simple, user-friendly button that, when pressed, temporarily unlocks or releases the door, enabling quick and easy egress. These buttons are commonly found near exit doors in buildings, especially those with magnetic locks or other electronic locking mechanisms. 
Here's a more detailed explanation:
  • Function:
    An exit button is wired to the access control system and, when pressed, sends a signal to release the door's locking mechanism, allowing a person to exit. 
  • Purpose:
    They provide a convenient and safe way to exit a secured area, especially in emergencies or when other access methods (like card readers) might not be available. 
  • Types:
    Exit buttons can be traditional mechanical buttons or touchless sensors that activate when a hand is waved in front of them. 
  • Importance:
    These buttons are crucial for meeting fire and building codes, as well as ensuring accessibility for all individuals. 
  • Applications:
    Exit buttons are used in various settings, including commercial buildings, residential complexes, and industrial facilities. 
Add to wishlist
Add to cart
Quick view
Compare

Underground Exit Wand Vehicle Detector

$187.30
Add to wishlist
Add to cart
Quick view
Sold outHot
Dual swing gate opener -Royalgate RGSW700
Compare

Dual swing gate opener -Royalgate RGSW700

,
$739.30

Ship or pick up from our office.

Dual swing gate opener -Royalgate RGSW700

*Suitable gate weight: Maximum 150 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor
Add to wishlist
Read more
Quick view
Sold outHot
Swing gate opener -Royalgate RGSW650
Compare

Double swing gate opener -Royalgate RGSW650

,
$644.40

Ship or pick up from our office.

Double swing gate opener -Royalgate RGSW650

The Royalgate RGSW650 is a double swing gate opener designed to automate the opening and closing of two-leaf swing gates. It is manufactured by Royal Electronics Technology Center Co. (RETCC). Here's a breakdown of its key features and specifications:
  • Type: It's an articulated arm electric gate opener. This means it uses a two-part arm with an "elbow" joint that connects the motor to the gate. This design is often easier to install compared to other types.
  • Suitable Gate Weight: It's designed for gates with a maximum weight of 200 kg per leaf. (Note: One source indicates 100 kg per leaf, while another says 200 kg. It's advisable to confirm the exact specification with the vendor).
  • Power: It can be either 120VAC or 24VDC.
  • Safety Features: Like many modern gate openers, it likely includes obstacle detection, meaning the gates will stop or reverse if they encounter an object during operation. It also typically comes with a safety sensor.
  • Included Components: A typical package includes:
    • 2 x Electromechanical arms
    • 1 x Main control board
    • 1 x Waterproof box
    • 2 x Remote controls
    • 2 x Manual release keys
    • 1 x Safety sensor
  • Installation: Articulated arm gate operators are often a good choice when the gate opener needs to be mounted on a large gate pier or pillar.
  • Additional Features (may vary by model/kit): Some models and associated accessories can offer features like Wiegand input/output for external card readers, tamper alarms, backlit keypads, short circuit protection, and adjustable settings for door output time and alarm time.
In essence, the Royalgate RGSW650 provides an automated and secure solution for residential and commercial properties with double swing gates, offering convenience and control over access.
Add to wishlist
Read more
Quick view
Gate Opener Remote Control -C4
Compare

Gate Opener Remote Control -C4

$39.85

Ship or pick up from our office.

Gate Opener Remote Control -C4

*433 MHz *2-4 Buttons *More than 10 different designs
Key features and functions of a gate opener remote control:
  • Remote Operation:
    Enables opening and closing the gate from a distance, typically within a certain range (e.g., 100 feet). 
  • Radio Signal Transmission:
    Emits a radio signal to the gate's receiver unit, initiating the gate's movement. 
  • Compatibility:
    Most remotes are compatible with specific gate openers and require the same frequency to function. 
  • Programming:
    Can be programmed with the gate's receiver unit, often involving a "learn" or "program" button on the gate opener. 
  • Multiple Remotes:
    Many gate openers can be paired with multiple remotes, allowing multiple users to control the gate. 
  • Universal Remotes:
    Some universal remotes can be programmed to work with different gate opener brands, as long as they are compatible. 
  • Safety Features:
    Some gate openers incorporate safety features like sensors that detect obstructions and reverse the gate's movement. 
Add to wishlist
Add to cart
Quick view
Wireless Keypad Access Control KW402
Compare

Wireless Keypad Access Control KW402

$89.95

Ship or pick up from our office.

Wireless Keypad Access Control KW402

*Wireless *Rain Shield Cover included *2 Channels *LED Back Light *433 MHz
The wireless keypad access control KW402 is the preferred secure activation device for the autoslide automatic door system. This security keypad will allow you to enter your home from the outside using a unique programmed code. Combined with the VDS and ZERO gate motor, you can have a secure and automated entryway into and out of your home or workplace. The wireless keypad access control KW402 is wireless and provides the benefit of not having to run cables through your exterior walls. It has two channels that will allow you to not only have a regular access code but also one you can change for guests to access your home. The wireless keypad access control KW402 is programmable for two separate codes up to eight digits long each. Audible beeps will alert you to an accepted code as well as an invalid code.
Specifications:
Duplicate Your Existing Remote Controllers so you always have a backup:
1.Vehicle central locking systems
2. Garage doors
3. Electronic gates
4. Electrical appliances/Home automation i.e. lights
5. Car sunroofs
6. Car/Motorbike alarms Easy to use, the 4 channel remote control system lets you take control of your gets, car, home and garage

Wireless Keypad Access Control KW402:

1,This is a dual channel transmitters that are activated only after having entered a Suitable combination.
2, The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.
3,The estimated transmission range is 200 m in open space and 35m indoors .
4, The units are designed to ensure battery life equivalent to an estimated 2 years of oper-ation considering 10 transmissions/day.

Specification Wireless Keypad Access Control KW402:

Power:6Volt DC 2PCS CR2032 Li battery Battery life:2 years (4 times operation every day)
Frequency:433.92MHz+/-75KHz
Transmitter power:1Mw
Data format:standard
Work temp:-20~+55 centidegree
Password number:0-8
Water proof level:1p54
Dimension:85*75*35mm
Weight:150g
Add to wishlist
Add to cart
Quick view
Swing gate opener -VDS MP110
Compare

Dual swing gate opener -VDS MP110

,
$1,230.35

Ship or pick up from our office.

Product Sheet PDF

Dual swing gate opener -VDS MP110

*Suitable gate weight: Maximum 200 Kg (Per leaf) Included: *2 x Electromechanical arm *1 x Main control board *1 x Waterproof box *2 x Remote control *2 x Manual release key *1 x Safety sensor The VDS MP110 is a model of electromechanical swing gate opener manufactured by VDS Automation. It's designed for automating single or double leaf swing gates, commonly used for residential and light-industrial applications. Here's a breakdown of its key features and specifications: Key Features
  • Suitable Gate Size and Weight:
    • It can handle gates with a maximum weight of up to 200 kg (per leaf).
    • It supports gate leaf lengths ranging from 1.80 meters up to 3.50 meters.
  • Durable Construction: It features a sturdy aluminum structure and a strong rolled warm shaft, indicating robust build quality for longevity.
  • Quiet Operation: The VDS MP110 is known for its very quiet operation.
  • Safety Features:
    • Anti-squashing system (EN 12453): This is a crucial safety feature that prevents the gate from exerting excessive force if it encounters an obstruction, minimizing the risk of injury or damage.
    • Slowing down function (EN 12453): This allows the gate to slow down before reaching its fully open or closed position, ensuring smoother operation and reducing impact.
    • Thermal cut-out 140°: This protects the motor from overheating.
  • Manual Release: It includes a manual release with a key, allowing you to operate the gate manually in case of a power outage.
  • Lubrication: Mechanical parts are lubricated with lithium grease to protect against corrosion, oxidation, and rust.
  • Opening Angle: It offers a 120° opening capability. Some systems can be further enhanced for a 180-degree opening with optional chain drive systems.
  • Easy Installation: It is designed for quick installation with multi-position brackets and technopolymer covers for the brackets.
  • Motor and Power: It features a high-performance electric motor and typically operates on a 120V AC power supply, though some versions may support 24V DC.
  • Limit Switches: It has a standard opening limit switch, with an optional closing limit switch.
Variants The VDS MP110 series likely includes variations with different rod stroke lengths (e.g., 300mm, 400mm, 500mm), which determine the maximum gate leaf length they can accommodate.
Add to wishlist
Add to cart
Quick view
Keypad access control K140C101
Compare

Keypad access control K140C101

$117.80

Ship or pick up from our office.

Keypad access control K140C101

*Rain Shield Cover *Waterproof Version *EM/ID card/tag reader *Backlight *DC 12 V *Shock resistance *1000 Users *Anti-vandal Metal shell *Doorbell button The K140C101 is a keypad access control system designed primarily for door access, especially in outdoor settings. It operates as a standalone unit, meaning it doesn't require a computer or external software for programming or operation. Here's a breakdown of its key features and functionalities:
  • Keypad and Card Reader: It combines a numeric keypad for PIN code entry and a proximity card reader, allowing users to gain access through either method or a combination of both.
  • Standalone Operation: You can program and manage users directly on the device itself.
  • Waterproof and Durable: It's designed to withstand outdoor weather conditions, making it suitable for gates, building entrances, and other exterior applications.
  • User Capacity: It typically supports a good number of users (e.g., 1000 or 2000 users, depending on the specific model)
  • Wiegand Output: It may have a Wiegand output, which allows it to be integrated with larger, more complex access control systems if needed.
  • Lock Options: It can be connected to various locking mechanisms like magnetic locks or electric strikes.
  • Security Features: It often includes features like anti-tamper alarms and can lock down for a period after multiple incorrect entries.
  • Applications: Common uses include securing small offices, residential buildings, gate entries, and commercial facilities like warehouses or labs.
In essence, the K140C101 provides a robust and convenient keyless entry solution for controlling access to various spaces.
Add to wishlist
Add to cart
Quick view